Daedalean AG

Condition: used,

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. The chamber was purchased from an official Polish distributor and has been serviced regularly. Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT * Unit is 100% functional * Regularly serviced * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures Iedjz Tzvvopfx Am Deih * Testing under high-humidity conditions * Material aging studies * Testing of electronic components * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. The unit is fully functional and ready for further use.

Year of construction: 2025, condition: like new (used), functionality: fully functional,

Condition: excellent (used), For sale: a climate chamber in excellent technical and visual condition. If you have any questions, please feel free to contact me. Technical specifications: Chamber capacity: 749 liters Operating temperature range: From 0°C to +70°C (without humidity control) From +5°C to +70°C (with humidity control) Humidity control range: from 10% to 90% RH (relative humidity) Iodpfx Amoz Tc Hij Doih Cooling/heating: Peltier technology (very energy-efficient, with low vibration) Internal dimensions (W × H × D): 1040 × 1200 × 600 mm External dimensions (W × H × D): 1224 × 1720 × 755 mm Power supply: 230 V, 50/60 Hz Maximum power consumption: 1050 W

Condition: repair required (used), functionality: limited functionality, Equipment: type plate available, For sale is a Zwick/Roell Z2.5/TS1S material testing machine with a nominal force of 2.5 kN. Technical data Manufacturer: Zwick/Roell Type: BZ2.5/TS1S Year of manufacture: 2006 Nominal force: 2.5 kN Max. working space height: 573 mm Testing speed: 0.1 to 800 mm/min Precise guidance and DC drive Includes hardness testing device for optical methods (HV, HK, HB) according to the existing equipment Condition: The machine is currently not operational, as the installed load cell measures outside the permissible tolerance and the calibration failed. According to current knowledge, the cause lies in the area of the force measuring device. The machine was operated until the deviation was detected. The drive, mechanics, and other components have not been further inspected and are therefore explicitly offered without any guarantee of functionality. Scope of delivery Zwick/Roell Z2.5/TS1S material testing machine Iiedpfsz S D Skjx Am Doh Existing accessories according to the photos Documentation, if available The machine is explicitly sold as defective and untested.

Condition: used, Technical details: Item description Temperature range: 0 to +70 °C Setting accuracy: 0.1 °C Internal volume: 53 liters External dimensions (W × H × D): approx. 585 × 787 × 604 mm Iedpfjz Szl Uox Am Djih External depth incl. door handle: approx. 660 mm Internal dimensions (W × H × D): approx. 400 × 400 × 330 mm Weight: 74 kg Power consumption: 275 W Power supply: 230 V / 50–60 Hz Current consumption: 1.2 A Maximum number of shelves: 4 Maximum total load: 80 kg

Condition: used, Item description Temperature range: +20 to +80 °C (IN/IF) Setting accuracy: 0.1 °C Capacity: 161 liters External dimensions (W × H × D): approx. 745 × 1107 × 584 mm Iedez Szlzepfx Am Doih External depth including door handle: approx. 640 mm Internal dimensions (W × H × D): approx. 560 × 720 × 400 mm Weight: 72 kg Power: 1,600 W (IN/IF) Power supply: 230 V Power consumption: 7.0 A (IN/IF) Max. number of shelves: 8 Max. load per shelf: 30 kg Max. total load: 210 kg

Condition: used, LDS Shaker Spare Parts / Vibration Testing System Accessories LDS V8-440 / HBT750C Spare Parts and Accessories Package 30 individual parts – sensors, filters, cables, and mechanical spare parts Mostly individually packaged and visually in new condition For sale is a comprehensive spare parts and accessories package from the inventory of an LDS V8-440 / HBT750C vibration testing system. The collection consists of various spare parts for electrodynamic vibration testing systems, including filter elements, pressure sensors, connecting cables, and mechanical components. Depending on compatibility, the parts are suitable as a stock of spare parts for the maintenance, repair, and servicing of suitable shaker systems. Technical Data / Parts List: Manufacturers / Brands: LDS, BD Sensors, WIKA, and HYDAC Equipment Type: Shaker Spare Parts / Vibration Testing System Accessories Original System Assignment: LDS V8-440 / HBT750C Total Scope: 30 individual parts in 15 positions LDS Filters and Filter Elements: 4x LDS V300232 – Filter mats 25 x 25 mm 2x LDS V500133 – Filter elements for vibrators 1x LDS V500135 – Filter element for HBT sliding table 1x LDS V500131 – Oil filter for LPT 1x HYDAC 1260880 / 0030 D 020 ON – Hydraulic filter LDS Mechanical Spare Parts: 2x LDS V300089 – Target / Reference element for V8/V895 1x LDS V300087 – Target / Reference element 1x LDS V300135 – Steel bushing / ball joint 1.5 inches 1x LDS V300666 – Steel guide shaft for shaker armature 2x LDS V300122 – Spare parts, exact designation unknown Sensors / Pressure Measurement Technology: 5x BD Sensors DMP 331 – Industrial pressure transmitters 1x WIKA S-2631301 / P.8392006 – Pressure sensor / pressure transmitter Connecting Cables / Wires: 1x LDS V300187 – Electrical connecting cable 1x LDS V300186 – Grounding connecting cable 6x Shaker receiver cables – signal and connecting cables Iijdpfxez Spt Hj Am Doh Features / Special Characteristics: Extensive spare parts inventory Original part numbers on numerous packages Several filter elements for vibrators and sliding table Pressure transmitters from various manufacturers Electrical connecting and signal cables Mechanical spare parts for shaker systems Mostly individually packaged components Application Areas: Electrodynamic vibration testing systems LDS shaker systems Maintenance and servicing Spare parts supply Vibration and shock testing technology Hydraulic and pressure measurement technology Industrial testing systems Compatibility: The spare parts package comes from the environment of an LDS V8-440 / HBT750C vibration testing system. Individual packages show additional model designations such as V8/V895, V810, or V850. The actual suitability and compatibility of the respective spare parts should be checked before use using the part numbers and technical data. Condition: Used stock / Used Mostly individually packaged Visually in new or unused condition Functionality testing of the sensors is not documented Optical condition according to images Scope of Delivery: 1x complete LDS shaker spare parts and accessories package 30 individual parts according to the listed parts list Accessories as shown in the images The table or other items not explicitly mentioned in the photos are not included in the sale. Shipping is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Technical data: Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Iiedpfx Amez Sn Uvj Deh Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Iiedpfjz Snbwex Am Doh Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Iijdpfx Amsz Sli Es Doh Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for quick measurements in the field, production, or quality control. Features: • Original set with carrying case, instruction manual, and accessories • Brinell, Rockwell B and C, and Vickers scales • Model: No. 3 / Instrumatic Universal Hardness Tester • Manufacturer: C.V. Instruments Ltd, Bradford, England Iiedpfxsz Skquo Am Deh • Mechanical dial gauge – measurement without power • Clear analog measurement scale ⸻ Included in the set: • Hardness tester • Carrying case • Instruction manual in German • Complete set of adapters and sleeves (visible in the set) Condition: like new / warehouse stock Equipment unused or used a few times for testing – no signs of wear.

Condition: used, Vötsch Temperature testing chamber / Temperature chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C With viewing window Iiedpfx Amjz R Rgyo Djh For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature testing, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features digital temperature control, a viewing window, a test chamber made of stainless steel and a side access port for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Equipment type: Temperature testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 4.36 K/min Temperature change rate, cooling: approx. 2.6 K/min Heater renewed Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Permissible operating overpressure: 25 bar Standing pressure: 11.5 bar Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A Weight: approx. 140 kg net Equipment: Digital temperature control Temperature regulation Air-cooled design Test chamber made of stainless steel Viewing window Side access port for test specimens Front main switch RS232 interface Connections for external control Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Workshop tested with documented functional test Scope of supply: 1x Vötsch VT 7004 temperature testing chamber Design with viewing window Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Temperature testing chamber / Climate testing chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system features a programmable controller, a stainless steel test chamber, air cooling, and a side access for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Device type: Temperature testing chamber / Climate testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Iodpsz R Nrzjfx Am Doih Test results documented in the workshop protocol: Temperature change rate, heating: approx. 5.44 K/min Temperature change rate, cooling: approx. 4.81 K/min Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Standing pressure: 15 bar Permissible operating overpressure: 25 bar Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A External dimensions according to manufacturer's drawing (W × D × H): approx. 950 × 830 × 757 mm Weight: approx. 150 kg Test specimen access: approx. Ø 80 mm Equipment: Programmable controller Temperature control Air-cooled design Stainless steel test chamber Side access for test specimens RS232 interface RS485/RS422 interface Digital I/O Potential-free contact Program operation and manual operation Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Aging and stress tests Condition: Used Optical condition as shown in the pictures With signs of wear and tear due to age and use Scope of delivery: 1x Vötsch VT 7004 temperature testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C Iedpfx Ajz Rwk Rjm Deih   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm   Operation: WEBPanel touch display with WEBSeason®   Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 %   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Year of construction: 2010, condition: used, 2010 Votsch VCS 7310-5 H/S Heavy Duty, High-Performance Environmental Chamber With Acquisition Unit - Internal Dimensions W1,100 D1,320 x H2,080mm. S/No. 59566147420010 (2006). Iiedpfx Amjz N Hyre Deh

Condition: used, VÖTSCH Industrial drying cabinet / chamber dryer / chamber drying oven Iiedpfxsz N Am Ij Am Doh Vötsch VTL 75/100 Industrial convection drying cabinet up to 250 °C with 562 liters of usable volume For sale is a used industrial drying cabinet from Vötsch Industrietechnik GmbH, model VTL 75/100. The VTL 75/100 is an electrically heated chamber dryer for industrial drying, heating, and tempering processes. The VTL series is designed for drying processes with controlled exhaust air extraction and takes into account the safety requirements of EN 1539. The unit features a spacious drying chamber with removable wire mesh shelves, an insulated door with an all-round seal, and a side-mounted control and operating unit. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VTL 75/100 Equipment type: Industrial drying cabinet / chamber dryer Rated temperature: 250 °C Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Connected load: 20 kW Rated power: 18 kW Rated current: 29.0 A Usable volume: 0.562 m³ / 562 liters Steam volume: 0.998 m³ Minimum exhaust air volume flow: 240 m³/h Internal dimensions according to manufacturer: Width: approx. 750 mm Height: approx. 1,000 mm Depth: approx. 750 mm External dimensions according to manufacturer: Width: approx. 1,470 mm Height: approx. 1,900 mm Depth: approx. 1,210 mm Empty weight: approx. 475 kg The external dimensions and weight are manufacturer's specifications for the VTL 75/100 model size. Deviations may occur depending on the specific equipment. Equipment: Electrical heating Convection system with fan Exhaust system with fan and air duct JUMO dTRON 304 temperature controller Additional digital display and control unit Several removable wire mesh shelves Insulated drying chamber Single-leaf door with all-round seal Side-mounted control cabinet with operating elements Main switch and indicator lights Electrical control and switching components Application areas: Industrial drying processes Drying of coatings and paints Heating and tempering of components Material testing and heat treatment Production and manufacturing processes Research and development Scope of supply: 1 x Vötsch VTL 75/100 industrial drying cabinet Wire mesh shelves as shown in the pictures Other equipment as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear Shipping by freight forwarder is possible upon agreement. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Process control with temperature monitoring and additional connections For sale is a used industrial control unit from the manufacturer STANGE Elektronik GmbH, Type SE-604, installed in an additional housing with various operating and connection components. The SE-604 combines industrial process control, multitasking PLC with CoDeSys, program management and plant visualization in one system. The offered device also includes a PMA temperature controller, an operating hour counter, several industrial connectors, and other operating and connection options. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Iisdjz Nvk Hjpfx Am Dsh Device type: Industrial control / Process control Display: 6.5 inch TFT-LCD Resolution: 640 × 480 pixels Operation: Membrane keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC Voltage supply SE-604: 24 V DC (18–36 V) Power consumption: typical 24 W Operating temperature: 0 to +50 °C Protection class SE-604: Front IP65 / Rear IP20 Dimensions SE-604 (W × H × D): 290 × 165 × 90 mm Weight SE-604: approx. 2.5 kg The specified dimensions and weight refer exclusively to the SE-604 control unit. The overall dimensions and total weight of the offered device with housing are unknown. Functions according to the manufacturer: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function Configurable plant visualization Web server / remote control Configurable user and operating levels Interfaces of the SE-604 according to the manufacturer: Ethernet 10/100 2 × USB 2.0 RS232 RS422 CAN Profibus DP optional Modbus optional Additional features of the offered device: PMA KS 10-1 economy temperature controller Temperature monitoring test chamber Müller operating hour counter Button "Heat disc" Button "Light" Front USB port Multi-pole industrial connectors Additional colored connection sockets Housing with side carrying handles Connection and linking cables as shown in the pictures The exact configuration and function of the additional connections are unknown. The mentioned control functions describe the technical possibilities of the SE-604 according to the manufacturer. The actually installed software and configuration of the offered device have not been checked. Application areas: Industrial and process plants Heat treatment plants Multi-purpose chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Test and experimental systems Spare part for compatible systems Scope of supply: 1 × STANGE SE-604 control system in housing 3 × Connection and linking cables as shown in the pictures 1 × Folder as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear Operating hour counter available The table shown in the pictures or other items not explicitly mentioned are not part of the sale. Shipping or forwarding shipping possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Automation solution with CoDeSys multitasking PLC For sale is a used industrial control system from the manufacturer STANGE Elektronik GmbH. The SE-604 is a powerful control and visualization solution for industrial process and heat treatment systems. Control, PLC, program management, and system visualization are combined in one system. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Display: 6.5 inch TFT-LCD Resolution: 640 x 480 pixels Operation: Membrane keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC SE-604 power supply: 24 V DC (18–36 V) Power consumption: typically 24 W Operating temperature: 0 to +50 °C Protection class: Front IP65 / Rear IP20 Dimensions SE-604 (W x H x D): 290 x 165 x 90 mm Weight SE-604: approx. 2.5 kg Functions: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function System visualization Web server / remote control Configurable user and operating levels Interfaces: Ethernet 10/100 2 x USB 2.0 RS232 RS422 CAN Modbus Profibus DP optional Application areas: Industrial and process plants Heat treatment systems Universal chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Scope of delivery: STANGE SE-604 control system in housing Connection and cable set as shown in the pictures Condition: Iisdpfxez Nvkyj Am Deh Used Optical condition as shown in the pictures Operating hour counter available The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, UNHOLTZ-DICKIE Electro-dynamic vibration testing system / Shaker system Model 560 / SALL50F Vibration testing system with power amplifier, controller, and cooling fan For sale is a used electro-dynamic vibration testing system from the manufacturer UNHOLTZ-DICKIE. The system is suitable for vibration and shock testing in industry, research, development, and quality assurance. Technical data: Manufacturer: Unholtz-Dickie Corporation Shaker model: 560 System: TA117SA-560 Design: Electro-dynamic / air-cooled Sine force: 6000 lbf / 26.7 kN peak Random force: 5200 lbf / 23.1 kN RMS Max. acceleration: 100 g Shaker stroke: 25.4 mm Axial resonant frequency: approx. 2200 Hz Effective armature mass: approx. 20.4 kg Power amplifier: Type: SALL50F Power Amplifier Connection: 400 V / 3 phases / 50 Hz Rated current: 60 A Max. output current Sine: 440 A RMS Max. output current Random: 300 A RMS Controller / Software: Brüel & Kjær Shaker Control Software version: 8.1001 Library version: 6.3120 Industrial PC with monitor, keyboard, and mouse USB license key as shown in the pictures Cooling fan: Manufacturer: Industrie CBI Type: RD 65 J EMK three-phase motor: 15 kW 400 V / 50 Hz / 2935 rpm Equipment: Unholtz-Dickie Shaker Model 560 SALL50F Power Amplifier Control and regulation system CBI industrial cooling fan PC system with Shaker Control software 2 mounting plates with hole grid Connecting cables and accessories as shown in the pictures System documentation / folder Applications: Vibration testing Shock testing Resonance studies Automotive and electronics testing Component and assembly testing Research and development Industrial quality assurance Scope of delivery: 1 × Unholtz-Dickie Shaker Model 560 1 × SALL50F Power Amplifier 1 × CBI industrial cooling fan 1 × PC system with software and license key 2 × Mounting plates Controller, cables, documentation, and accessories as shown in the pictures Weight approx. 1700 - 2500 kg Iedpfx Asz Nkm Aom Djih Condition: Used Optical condition as shown in the pictures. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder possible upon agreement. Subject to change, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: used, RMS Type: Test Manager SWR 900 RMS Electro-dynamic vibration system Test Manager SWR 900 Component carrier SWE 348 Load amplifier SWE 366 Load amplifier SWE 366 Power supply SWE 350 Condition: used Scope of delivery: (See image) Ijdpfez Nf Rcjx Am Djih (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Ishida mod IX-GN-4043-S X-ray machine whit rejector year of construction 2017. Iiedpfx Amez I S Epo Deh Belt width 44 cm.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell Z005 5 kN Allround table-top Complete material testing system with testXpert II and extensive accessories For sale is a used universal testing machine from the manufacturer Zwick / Roell. The testing system is suitable for tensile, compression and material tests, as well as for component, plastic, metal and parts testing. Technical data: Manufacturer: Zwick / Roell Type: Z005 / 5 kN Allround table-top Testing system type: S0101 Max. testing force: 5 kN Crosshead speed: 0.0005 – 3,000 mm/min Return speed: max. 3,000 mm/min Testing width: 640 mm Testing height without attachments: approx. 1,400 mm Dimensions of the testing system with stand profiles and machine electronics (W x D x H): approx. 1,244 x 690 x 1,878 mm Weight with typical attachments: approx. 291 kg Iodpfxsz Iy Tzs Am Doih Power connection: 230 V / 50–60 Hz Connection: 1L / PE / N Equipment: Zwick / Roell Z005 5 kN testing machine Zwick / Roell machine electronics Handheld control unit with emergency stop Zwick / Roell testXpert II testing software PC system with monitor, keyboard and mouse Load cell and measuring components SAIM cross / positioning table Specimen holders and clamping tools Clamping plate Connection and measuring cables Original operating manuals Software / documentation Further extensive accessories as shown in the pictures Application areas: Tensile testing Compression testing Material testing Component testing Plastic and metal testing Parts testing Automotive testing Quality assurance Research and development Scope of delivery: 1 × Zwick / Roell Z005 5 kN Allround table-top Machine electronics and handheld control unit PC workstation with testXpert II Testing and clamping tools Load cell / sensors SAIM positioning table Documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Temperature testing chamber / Vibration testing chamber Vötsch VTV³ 7120-10 temperature testing chamber Temperature range: -70 °C to +180 °C Designed for combination with vibration / oscillation testing systems For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik / Weiss Technik. Suitable for temperature testing as well as testing in combination with vibration and oscillation testing systems, environmental simulation, material and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik / Weiss Technik Type: VTV³ 7120-10 Design: Customer-specific unit Simpac Device type: Temperature testing chamber / Vibration testing chamber Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1,150 liters Temperature change rate cooling: approx. 10.5 K/min Temperature change rate heating: approx. 12.0 K/min Test chamber dimensions (W × D × H): approx. 1,100 × 1,100 × 950 mm External dimensions (W × D × H): approx. 1,525 × 3,590 × 2,150 mm Weight: approx. 2,150 kg Refrigerant 1: R452A Quantity: 8.00 kg · GWP: 3,922 · CO₂ equivalent: 31.38 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g Refrigerant 2: R23 Quantity: 5.60 kg · GWP: 14,800 · CO₂ equivalent: 82.88 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g · Static pressure: 17 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 26 kW · Rated current: 49 A Equipment: Programmable touch panel control Temperature control Large stainless steel test chamber Observation window Test specimen ports Preparation for vibration / oscillation testing systems Water-cooled refrigeration unit Multi-stage refrigeration system Connection and supply components as shown in the pictures Application areas: Temperature and vibration testing Environmental simulation Material, electronics, and component testing Assembly and automotive testing Quality assurance Research and development Lifetime, aging, and stress tests Environmental Stress Screening (ESS) Condition: Used Optical condition as shown in the pictures Scope of delivery: 1 × Vötsch VTV³ 7120-10 temperature testing chamber Programmable touch panel Existing connection and supply components Accessories as shown in the pictures Shipping or freight shipping possible. Subject to changes, errors, and prior sale. Iiodpfx Aez Ixwlem Dsh We will gladly answer any further questions by telephone.

Condition: used, RMS Power amplifier / field unit / vibration testing system RMS TGE 10-5/12 + RMS FE3 System package offered exclusively as a source of spare parts / component supply For sale is a used RMS system package for vibration testing systems, consisting of a power amplifier, cooling unit and field unit. The components are sold exclusively as a set. Functionality has not been tested. Technical data, power amplifier: Manufacturer: RMS Regelungs- und Messtechnik Type: TGE 10-5/12 Serial No.: 16606 Year of manufacture: 2014 Input: 3 × 400 V / 50 Hz Power: 45 kVA Cooling unit: Type: SWG 761/9 Serial No.: 16608 Year of manufacture: 2014 Weight: approx. 250 kg Power stages: RMS power module TGE 10-400 Several power modules available in the amplifier cabinet Field unit: Manufacturer: RMS Regelungs- und Messtechnik Type: FE3 Serial No.: 10712 Year of manufacture: 1995 Current display: 0 – 300 A Weight: approx. 600 kg Dimensions and weight: Dimensions amplifier / cooling unit (W × D × H): approx. 1,800 × 800 × 2,000 mm Weight power amplifier: approx. 800 kg Weight cooling unit: approx. 250 kg Weight field unit FE3: approx. 600 kg Total weight: approx. 1,650 kg Equipment: RMS power amplifier TGE 10-5/12 RMS cooling unit SWG 761/9 RMS field unit FE3 RMS power module TGE 10-400 Isdpfx Asz Ixu Dsm Djih System control panel with touch display Power transformers / chokes Power, control and protection components Cooling system / cooling fan Analog ammeter 0 – 300 A Emergency stop, start button and main switch Connection and supply components as shown in the pictures Application areas: Spare parts sourcing Repair of existing RMS vibration testing systems Supply of spare parts and assemblies Conversion and repair projects Scope of delivery: 1 × RMS TGE 10-5/12 power amplifier 1 × RMS cooling unit SWG 761/9 1 × RMS FE3 field unit Available TGE 10-400 power modules System control panel Connection and supply components as shown in the pictures Condition: Used Optical condition as shown in the pictures Functionality not tested Sold exclusively as a source of spare parts / component supply. Not offered as a functional machine. No warranty for functionality, operational readiness or completeness. Shipping or freight transport possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.