Condition: used, Mitutoyo BHN 706 Co-ordinate Measuring Machine with Aberlink 3D Software, Deva Pendant Control, Servo Amplifier, Renishaw PH10T Plus Probe Head, PHC 10-3 Plus Controller, Granite Bed Area 1520mm x 940mm Between Columns including Probes & Clamping. S/No. N92090058 - 9005105102 Cjdpfx Aex Ahcpjflehf Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Shimadzu Shimadzu EZ-LX Universal Testing Machine + Trapezium X Software – 5 kN For sale is a professional materials testing machine from Shimadzu, model EZ-LX from the EZ-Test series. This system is suitable for performing tensile, compression, and flexural tests on a wide range of materials. The machine comes complete with a PC system, monitor, keyboard/mouse, Trapezium X software (version 1.5.1), and comprehensive documentation. Ideal for laboratory, research, quality assurance, or training applications. Features of the device: - Tensile and compression testing up to 5 kN - Precise measurement of force and displacement - Fully automatable test sequences - Creation and analysis of diagrams & test reports - Emergency stop button and safety functions - Operation via PC with installed software Technical data: - Model: Shimadzu EZ-LX - Power supply: 200–230 V - Frequency: 50/60 Hz - Power consumption: 850 VA - Fuse: 250 V / 5 A (slow-blow) - Force capacity: 5 kN - Dimensions: approx. 70 × 50 × 150 cm - Weight: approx. 55 kg Cjdpfxox Dbixs Afljhf Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery (see picture): - Shimadzu EZ-LX testing machine - PC (Lenovo) incl. monitor, keyboard & mouse - Installed Trapezium X software - Original manuals and documentation - Connection cables (Subject to changes and errors in the stated specifications!) Please feel free to contact us by phone with any further questions.

Condition: good (used), Year of construction: 2007, 2nd unit MORA-GEMODEK Type: MICROSPEED 10 Year 2007 Measuring machine control cabinet with remote control. Codpfjr Igwnox Aflshf

Condition: used, Year of construction: 2009, functionality: fully functional, overall weight: 50 kg, total height: 1,090 mm, total width: 330 mm, total length: 530 mm, Used 5 kN tensile and compression testing machine. Can be supplied with load cells ranging from 5 N up to 5 kN, depending on your requirements. The Emperor software works perfectly under Windows 11. Currently, many testers in the Netherlands and Belgium are still operating with this software. The software features an advanced module that allows the programming of highly complex procedures. There is also a basic mode for use in, for example, a production environment. In this mode, tests can be run with a single mouse click, and results are clearly displayed with a pass/fail indication. All data is, of course, stored and can be retrieved later. The price includes a load cell of your choice (subject to availability), delivery within the Netherlands and Belgium, commissioning, and training. We provide a 6-month warranty. If the tester fails within this period, we will repair it if possible; if not, the purchase amount will be deducted as a discount on a new tensile testing machine. Chodpfx Afsx Apntjlof

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. Csdpfx Aex Dmr Esfljhf • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Chodpfxoxyunge Aflef Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control.

Condition: used, Year of construction: 1995, DEA Scirocco - 201310 Slant Bridge Technology Co-ordinate Measuring Machine with LK Metrology Camio CMM Software, Granite Bed Size 2880mm Long, 1360mm Between Column, 11+I2:I1350mm Under Z Axis Carriage, Renishaw PH10MQ Probe Head with Probes LK Joystick Operation. S/No. 00076 (1995) Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Chedsx Ag T Hspfx Aflef

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Csdpfsx Da Awex Aflshf Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Cjdpfxjxw N Uvo Aflehf Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Chodsx Apg Ajpfx Aflsf Delivery is limited to the Netherlands and Belgium. Key features include: – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Year of construction: 2005, condition: used, Analyzer, rheometer, viscosity meter, Modular Advanced Rheometer System -Condition: Function only as shown in the video, other functions not guaranteed -Scope of delivery: as shown in the pictures -Manufacturer: Thermo Electron Haake Mars, Modular Advanced Rheometer System -Haake Universal Controller: Thermo Electron Type Haake Universal Temperature Controller: Thermo Electron type Dimensions: 1070/450/H860 mm Cjdpfjxm U S Eox Afljhf -Weight: 86 kg

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Chjdpfx Asw Nylksflef Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: ready for operation (used), Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-2000 coordinate measuring system. Csdpfsxzn E Usx Aflshf The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 7 December 2025. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Chjdpfex A Ur Rex Afljf Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: excellent (used), GÖTTFERT Device type: MI-3 (011.01.3) Model/ Revision 01.00-A/R For sale is a Göttfert Melt Flow Index Tester MI-3, device type 011.01.3, revision 01.00-A/R. Göttfert is one of the leading manufacturers of polymer testing equipment, particularly for MFI/MFR/MVR measurements (Melt Flow Index). This model is used for determining the melt flow index (MFR) or melt volume rate (MVR) and is intended for quality control of thermoplastics in accordance with ISO 1133 and ASTM D1238. Note Göttfert MI-3 devices are used worldwide in laboratories for precise MFI/MFR/MVR measurements. Ideal for laboratory, training, research, plastics engineering, or as a source of spare parts. Description / Function: A melt flow index tester measures the flow behavior of plastics under defined pressure and temperature conditions. Typical Applications: Material quality control Batch comparison Investigation of aging and degradation Research and development The plastic is plasticized in the heated barrel and extruded through a standard die under defined load. The determined melt index serves as a quality parameter for many plastics. Chjdjx A Tr Aopfx Afljf Technical Specifications (complete) Device Information Model: 11.01.3 Temperature Temperature range: 50 to approx. 450°C (typical for MI-3 model) Temperature accuracy: ±0.1°C Temperature stability: ±0.1–0.2°C Multi-zone heating system Measuring System Standard barrel: Ø 9.550 ± 0.005 mm Die dimensions: Length: 8 mm Orifice: Ø 2.095 mm Very high repeatability (characteristic of Göttfert) Supports all standard MFR/MVR methods Supported test weights (model-specific) Standard: 2.16 kg Additional possible weights: 1.2 / 3.8 / 5 / 10 kg (depending on configuration) Operation Integrated color touchscreen display Graphical test control Options for automatic cutting unit (depending on model) Electrical Data: Voltage / Frequency: 230 V / 50 Hz Power consumption: 870 VA Can be operated directly on the European power grid Scope of delivery Göttfert MI-3 melt flow index tester Various accessories and tools (dies, cleaning tools, piston tools, etc.) Operating manuals All as shown in the pictures Important Note: "The table shown in the photos is not included in the sale." Condition: used (Specifications and details are subject to change and errors!) We are happy to answer further questions by phone.

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Chedpfx Afox A Aa Ajlof Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Maximum test chamber height: 1370 mm Test chamber width: 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic power unit 280 bar Mounting surface: 415 cm² Clamping device / specimen holder included (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. Chodpfjx A Aaiox Aflsf (Subject to alterations and errors in technical data; all information provided without guarantee!) For further questions, please feel free to contact us by phone.

Condition: used, Zwick Type: Z30 Csdpfxex Az Skj Afljhf Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + software testXpert II V3.5 Total weight approx. 500 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Offered here is a Zwick/Roell ProLine Z010 universal testing machine with a maximum test force of 10 kN. The system was manufactured in Germany, is CE-certified, and was built in 2022. It is suitable for all types of material testing, for example tensile, compression, and bending tests in laboratory, industrial, and quality control environments. Technical data of the testing machine: Manufacturer: Zwick/Roell Model / Type: ProLine Z010 (10 kN) Test Force (Fnom): 10 kN Model: Z010 TN ProLine, nominal force: 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuously up to nominal force High-precision guidance, very low noise generation High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Certification: CE Reference: 741077 Software & PC: testXpert II basic software in German Intuitive operation, force/elongation control, statistical evaluation, user management Power supply: 230 V, 50/60 Hz, 3.5 A, 1Ph/N/PE Weight: approx. 200 kg Note: The ProLine series is among the most precise and reliable testing machines for professional applications. Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photos) Zwick/Roell ProLine Z010 testing machine Test head / compression device PC system with monitor, keyboard, and mouse Chsdpfx Afjx Aqxmslef Various test fixtures and accessories (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for temperature and humidity testing of multiple specimens simultaneously. Device Description The climatic test chamber allows the function or material properties of a sample to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures effective heat transfer to the test samples. The air handling unit is located at the rear of the interior chamber. The refrigeration units are mounted in a separate frame behind the device, providing easy access. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed-air dryer. Fresh air flushing of the chamber is possible via a dedicated fan. Technical Performance Data: Temperature Tests: Temperature range: –60 °C to +90 °C Temperature deviation (temporal): ±0.5 to 1 K Temperature deviation (spatial): ±1 K at 200 mm distance from the wall Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Chodpfox Ankyjx Aflsf Climatic Tests Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation (temporal): ±0.5 K Humidity deviation: ±2 – ±5% RH (temporal) No radiant heat In steady-state condition Technical data refer to ambient temperature +25 °C, nominal voltage 400 V, without test sample, without radiant heat and without additional equipment. Dimensions: Internal dimensions (test space / usable volume): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Height: 2500 mm, Width: 2200-2250 mm, Depth: 2400-2500 mm (may vary slightly depending on configuration) External dimensions: Height: 2900 mm, Width: 2380 mm, Depth: 2890 mm (depending on door, frame, accessories, etc.) Operating Data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally-friendly refrigerants R 23 / R 404 A Notes Inspection by appointment only (46325 Borken) Shipping by freight forwarder possible – Costs & arrangements upon request Scope of delivery: (see images) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for temperature and humidity testing of multiple specimens simultaneously. Device Description The climatic test chamber allows the function or material properties of a sample to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures effective heat transfer to the test samples. The air handling unit is located at the rear of the interior chamber. The refrigeration units are mounted in a separate frame behind the device, providing easy access. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed-air dryer. Fresh air flushing of the chamber is possible via a dedicated fan. Technical Performance Data: Temperature Tests: Temperature range: –60 °C to +90 °C Cjdpfox Anipox Aflehf Temperature deviation (temporal): ±0.5 to 1 K Temperature deviation (spatial): ±1 K at 200 mm distance from the wall Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation (temporal): ±0.5 K Humidity deviation: ±2 – ±5% RH (temporal) No radiant heat In steady-state condition Technical data refer to ambient temperature +25 °C, nominal voltage 400 V, without test sample, without radiant heat and without additional equipment. Dimensions: Internal dimensions (test space / usable volume): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Height: 2500 mm, Width: 2200-2250 mm, Depth: 2400-2500 mm (may vary slightly depending on configuration) External dimensions: Height: 2900 mm, Width: 2380 mm, Depth: 2890 mm (depending on door, frame, accessories, etc.) Operating Data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally-friendly refrigerants R 23 / R 404 A Notes Inspection by appointment only (46325 Borken) Shipping by freight forwarder possible – Costs & arrangements upon request Scope of delivery: (see images) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg Chodpfx Afjx Ag R Solef For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Quality Vision OGP SmartScope FLASH CNC 300 For sale is an OGP SmartScope FLASH CNC 300, a high-quality multi-sensor coordinate measuring machine for precise 2D/3D measurement tasks. This system comes from industrial use and is ideally suited for quality assurance, production, toolmaking, and laboratory applications. Description: The FLASH CNC 300 is a CNC-controlled optical measuring system with optional laser and touch probe technology. It enables highly precise measurement of mechanical components – e.g. diameters, heights, distances, contours, and geometric elements. Thanks to its video technology, motorized zoom optics, and multi-sensor-capable architecture, it is particularly versatile in application. Technical Data: Model: SmartScope FLASH CNC 300 Manufacturer: Optical Gaging Products / Quality Vision International (USA) Measuring range (XYZ): 300 × 300 × 250 mm Max. workpiece weight: up to 30 kg System weight: approx. 160 kg Power supply: 230 V~, 50/60 Hz, 2.5 A Shipping weight (packed): approx. 340 kg Measuring Methods & Equipment: Optical video system with motorized 12:1 AccuCentric® zoom Automatic zoom calibration for highest repeatability LED illumination: - Transmitted light (profile) - Coaxial incident light - SmartRing™ LED ring light Optionally usable sensors: - Laser (TTL laser) - Touch probe / scanning probe - Microprobes / height measurement Supported software (model-dependent): Measure-X, ZONE3, etc. Fields of Application: - Quality assurance Cjdoxz A Evspfx Aflohf - Batch and single part inspection - Measurement of plastic, metal, and milled parts - Precision optics, mold, and tool measurement - Laboratory, production, and research Condition: used Scope of supply: (see image) (Specifications are subject to change and errors excepted!) We would be happy to answer further questions for you by phone.

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Chodpfjxzprcex Aflof Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Chsdpfx Ajxzgn Ioflef Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.