Evomax Oy

Condition: good (used), Year of construction: 2013, If some parts shown by hand, that parts not come with machine. Gslhcdsy Awxpsw Njua Technical data shown on picture.

Condition: good (used), Double-axis tilting rotary table (4th and 5th axis). Table diameter: 100 mm, maximum speed: 1,000°/sec, tilting axis travel: ±120°, rotary axis travel: 360°. Geljy Avgfshcdw Neua

Condition: defective spare-parts repository (used), The machine is defective; the control system does not start up. Mechanically, it is in good condition. Gslsy Auc Eshcdw Njua

Condition: ready for operation (used), Year of construction: 2013, TECHNICAL DATA Brand: FANUC Model: ROBODRILL α-D21LiA5 Year: 2013 CNC: FANUC 31i-MODEL B5 Serial Number: P135 YH478 TABLE DIMENSIONS Table size: 850 x 410 mm Load capacity: 300 kg T-slot spacing: 125 mm Number/size of T-slots: 3 x 14 mm Gueley At Aqshcdw Noa TRAVELS X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Distance from table to spindle nose: 150 to 480 mm FEEDS Rapid traverse X/Y/Z: 54 m/min Cutting feedrate: 1 to 30 m/min MOTORS Drive motor: 11 kW (1 min) / 3.7 kW continuous Feed motors X/Y/Z: α8/4,000is (2.9 kW) TURRET Taper: MAS BT 30 Drawbar type: MAS P30T-1 (45°) Column to spindle center distance: 400 mm PRECISION Positioning accuracy: 0.006 mm Repeatability: ±0.004 mm Tool magazine capacity: 21 Maximum tool length: 250 mm Tool change time: Approx. 1.8 s SPINDLE Spindle speed range: 100 to 10,000 rpm Spindle taper: 7/24 Taper No. 30 Internal cooling MACHINE DIMENSIONS Machine height: 2,236 ± 10 mm Floor space required: 2,115 x 2,040 mm Machine weight (including control section): Approx. 2,100 kg POWER SUPPLIES Electrical supply: 11 kVa Compressed air requirement: 0.35 to 0.55 MPa (gauge pressure) (0.5 MPa recommended), 0.15 m3/min (150 l/min) (at atmospheric pressure) ACCESSORIES Original FANUC 4th axis rotary table DDR (new price €18,000) Zero point clamping system Schunk NSE plus 138-V1 mounted on rotary (new price €2,100) Two Schunk KONTEC KSM2 90-400 vices (new price €2,000 each)

Condition: new, Year of construction: 2026, operating hours: 34 h, functionality: fully functional, travel distance X-axis: 559 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, controller model: Haas, workpiece weight (max.): 390 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 34 h, Haas VC-400 | NEW | Never Used | Pallet Changer | 12.000RPM spindle Factory Warranty 1 Year Immediate availability – brand new Haas VC-400, never used, with full factory warranty. For sale due to cancellation of a project. This machine is completely new and has never been put into operation. It remains in original factory condition: - professionally transported - properly installed - never powered up / no production hours Full factory warranty still valid (1 year) Purchased in 2026 Technical Specifications 1 Model: Haas VC-400 2 Control: Haas Next Gen Control 3 Spindle: 22.4 kW 4 Spindle speed: 8100 rpm 5 Travels: X 559 mm / Y 406 mm / Z 508 mm 6 Pallet changer: 2 pallets 7 Table size: 550 x 368 mm 8 Max table load: 390 kg Gsley Atpkehcdw Nsua 9 Tool changer: 30+1 positions 10 Coolant system Equipment & Options 1 Belt-type chip conveyor 2 360L coolant tank 3 Advanced Tool Management 4 CNC cabinet cooling system 5 ECO mode 6 Power failure detection 7 Ethernet interface 8 HaasConnect 9 Wireless file transfer (HaasDrop) 10 Second home position 11 Integrated lifting provisions 12 M-code media support 13 Rigid tapping 14 Variable coolant pump 15 Haas control 16 WiFi connection 17 Internal high-voltage transformer 18 12,000 rpm inline direct-drive spindle 19 Through-spindle coolant (21 bar) 20 Wireless probing system (Renishaw) 21 Programmable coolant nozzle 22 Internal air blast 23 Coordinate rotation and scaling 24 User-definable macros 25 Spindle orientation 26 Visual programming system Additional Items 1 Anchoring (machine and/or pallet changer incl. anchor set) – €299 2 Pneumatic preparation – €495 3 VPS start & spare package – €260 Price Machine price: €177,065 Additional items: €299 + €495 + €260 Total price: €178,119 excl. VAT Condition 1 Brand new (never used) 3 Original factory condition 4 Immediately available Additional Professionally transported and installed All documentation included Commissioning support possible trough HAAS HFO Location Belgium Transport is EXW, Machineseeker does not give this option but this listing is for EXW meaning the shipping costs will be for the buyer!

Condition: used, Year of construction: 2017, (2017) Bridgeport GX480 CNC Vertical Machining Centre with Fanuc Oi-MF Control Table Dimension 600 x 400mm (3 'T' Slots, Dimension 14 x125mm). Maximum Table Load 300kg. Axis Travel 'X'=480mm, 'Y'=400mm, 'Z'=430mm. Spindle Nose To Table Min/Max 150-580mm. Distance From Column To Table Centre 429mm. Rapid Traverse 'X'=36m/min, 'Y'=36m/min, 'Z'=36m/min. Maximum Spindle Speed 10,000rpm (7.5kW Motor). Spindle Taper BT40. 16 Position ATC. Maximum Tool Ø94mm (Ø150mm non Adjacent), Maximum Tool Weight 7kg. Maximum Tool Length 250mm. S/No. NVLB7E0004 (2017). With Coolant System, LCE Transformer & Handwheel. Approx Dimensions W1,800 x D2,445 x H1,940mm. Weight 3,800kg. Note: Workholding/Tooling Not Included. Gjlsy Angkehcdw Neua

Condition: new, Year of construction: 2022, (2022) NEW Brother W1000Xd1 CNC Vertical Machining Center X-axis travel: 1000 mm, Y-axis travel: 500 mm, Z-axis travel: 380 mm, CNC type: CNC-D00, Table length: 1100 mm, Table width: 500 mm, Max. workpiece weight: 5000 kg, Tool magazine: 28, Max. spindle speed: 16000 rpm, Spindle motor power: 12.9 kW, L x W x H: 2410 × 2333 × 2633 mm, Operating hours: 0 hours Goley Ami Rjhcdw Noua

Condition: used, Year of construction: 1999, x-travel 500 mm Gujlhcdwey Aa Nkj Noa y-travel 400 mm z-travel 400 mm control Heidenhain weight of the machine ca. 3200 kg

Condition: excellent (used), Year of construction: 2012, Technical specifications: Gelhcsyzzpvsdw Noua 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Travel range C axis: 360° CNC control: SIEMENS 840D Table width: 500 mm Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Workpiece measuring probe Chip conveyor Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11120, CNC Machining Center Brother R450X1 Year of manufacture: 2014, Serial number 11120 Control unit: Brother CNC Interface Equipment: 14-position tool changer, special clamping system with magnetic clamping plate Travel distances (X, Y, Z): 450 mm, 320 mm, 305 mm (17.7 in, 12.6 in, 12 in) ----- Attractive Offer – Flexible & Worry-Free We not only offer you a top-quality product, but also customized financing solutions tailored to your needs. Whether down payment, installment plans, or individual financing models – together, we will find the right solution for you. On request, we can also handle the entire transport logistics. From planning to reliable delivery, we ensure a smooth and timely process, so you don’t have to worry about a thing. 📞 Please feel free to contact us for more information or a non-binding offer. Gjlhcdeyzpffsw Njua We provide personal and competent advice.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 111849, CNC Machining Center Brother TC-R2A Year of manufacture: 2006, Serial number 111849 Control: Brother Equipment: 14-position tool changer, spindle mount BT-30 Travel distances X: 420 mm (16.5 in) Y: 320 mm (12.6 in) Z: 270 mm (10.6 in) ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options adapted to your needs. Whether down payment, installments or custom financing models – together, we will find the right solution. Upon request, we can also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and punctual process so you can focus on your core business. Gujlhcdjyzpdbow Nea 📞 Contact us for more information or a non-binding offer. We provide personal and competent advice.

Condition: excellent (used), Year of construction: 2010, operating hours: 1,350 h, Very little used machine, approx. 1,350 spindle hours! Control: Fanuc 31 i Travel X-axis: 300 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Number of tool stations: 12 positions Gslhjyzaq Socdw Noua Tool holder: HSK 32 Number of spindles: 1 Rapid traverse Z-axis: 60 m/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Max. speed: 15,000 rpm Chip conveyor

Condition: excellent (used), Year of construction: 2010, operating hours: 50,000 h, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 40,000 rpm, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel distances (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Main voltage: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Model: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 👉 Integrated dust/smoke extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in toolmaking 🧩 Features CNC control with operator panel 3-axis machining Compact and robust design Complete system including extraction unit Made in Germany 📦 Condition Machine in ongoing production Fully functional Well maintained Inspection under power possible 🚛 Delivery Available at short notice Free loading onto truck 📌 Applications Mold making Electrode manufacturing Precision machining 📞 Note Further images, videos, and technical details available on request. Gelhcsyxyz Sodw Noua Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller model: Mazatrol Fusion 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 510 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Swivel range A-axis: +30° / -120° Rotation range C-axis: +/- 360° Feed rate range (X-/ Y-/ Z-axis): 1 - 50,000 mm/min Rapid traverse (X-/ Y-/ Z-axis): 50 m/min Indexing A and C: 0.001° Swivel time 90° A/C: 1.9 / 1.5 s Main spindle Max. spindle speed: 12,000 rpm Spindle drive power: 22/15 kW Tool holder: ISO 40 Spindle diameter: 80 mm Acceleration time to max. speed: 1.7 s Worktable Clamping surface: 500 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 80 mm Distance from spindle to table: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Tool changer Max. number of tool positions: 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent spaces free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time: 4.5 s MACHINE DETAILS Control: Mazatrol Fusion 640M Total power requirement: 51 kVA Dimensions & Weight Space requirement: 3.4 x 3.7 x 2.8 m Machine weight: 7.5 t EQUIPMENT Hydraulic unit Guolhcdsyxmq Tjw Noa Coolant system Chip tray Tool measurement Documentation

Condition: like new (used), Year of construction: 2005, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, Hello Knuth X Graph 600 - Dima Great opportunity – the machine has never been used. This CNC milling machine is an unused stock item, still on its original steel shipping pallet. The photos show the pumps are still partially wrapped. The machine is dusty, some areas of the paintwork are faded and there are minor paint chips in some places. Heavy-duty cast iron construction, linear guides, servo drives. The control cabinet is clearly laid out for easy fault diagnosis. Equipped with LNC 520 control system. To this day we operate lathes and milling machines from the same manufacturer. The machine is currently powered on for demonstration purposes. We have not found any non-functional accessories. The control system is user-friendly and has considerable online support. THIS MODEL IS STILL AVAILABLE BOTH FROM THE MANUFACTURER AND DEALERS. Year of manufacture: 2005. Machine specifications (sourced online): - Travel: 600 x 400 x 250 mm - Distance between table and spindle nose: 250 mm - Table size: 600 x 400 mm - Max table load: 300 kg - T-slot: 12 mm, pitch 63 mm, 4 slots, cast iron table - Spindle speed: 3,000 – 24,000 rpm (to be verified), spindle motor 2.2 kW - Inverter approx. 5 kW, ER 20 taper - Rapid feed: 10,000 mm/min; working feed: 3,000 mm/min - Positional accuracy: +/-0.004 mm; repeatability: +/-0.003 mm - Gantry width: 720 mm - Air supply: 0.6 MPa - Weight: 2,000 kg - Dimensions: 1,600 x 1,600 x 2,000 mm - Power supply: 6 kW, AC 380V, 3-phase - Direct servo drive coupling - Centralized lubrication system - Coolant for machining (emulsion) - Work lighting - Signal beacon Gjlhsyxfmgscdw Noua - Robust pumps included

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 508 x 406 x 356mm, Guelhcsyw R Hpodw Noa Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Spindle Speed 10000rpm, HAAS Control, 20 Station ATC, coolant.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,435 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI CMX 50 U + PH150 was manufactured in 2019. It features an X-axis travel of 500 mm, Y-axis travel of 450 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful spindle capable of 12,000 RPM and a tool magazine for 60 tools. It includes a PH150 automationsystem. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 50 U + PH150 vertical machining centre we have for sale. Contact us for further details. Gujlhcoyw Ivzodw Nsa • B-axis: -5/+110° • C-axis: 360° • Spindle torque (100%/40%): 57/83 Nm • Rapid traverse: 30 m/min • Tool magazine: 60 tools with double gripper • Direct measurement on X/Y/Z axes • Renishaw tool and workpiece probes • Tank capacity: 250 liters • 3D Quickset • Electronic handwheel Additional equipment • Chip conveyor • Pallet system DMG MORI PH 150 with 6 pallets (398 x 398 mm, max load 150 kg) • Erowa MTS clamping system • 2 identical machines available! Technical Specification Taper Size SK 40

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Gjleyw Inqehcdw Neua Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: repair required (used), Year of construction: 1998, functionality: not functional, machine/vehicle number: KMH0141155, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc, total height: 2,250 mm, total length: 2,200 mm, total width: 2,200 mm, overall weight: 1,700 kg, spindle speed (max.): 8,000 rpm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, We are offering this FANUC α-T14iA vertical machining center in need of repair, year of manufacture 1998. Gujlsywzlvjhcdw Nja Manufacturer: FANUC Model: α-T14iA Year of manufacture: 1998 Machine type: Vertical machining center This machine has low operating hours and was used exclusively in single-shift operation for prototyping. The spindle is defective; otherwise, the machine is well-maintained and functional. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,696 h, travel distance X-axis: 550 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 425 mm, controller manufacturer: FANUC, controller model: Series 21M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis CHIRON FZ 12 S High speed was manufactured in 1996. It features an X-axis travel of 550 mm, Y-axis travel of 330 mm, and Z-axis travel of 425 mm. The machine has a spindle speed of 12,000 rpm and a tool capacity of 12 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 12 S High speed vertical machining centre we have for sale. Contact us for further details. • Installed options: Preparation for 4th and 5th axis (control cabinet ready) • Status: Powered on, fully functional • Machine hours: 5,696 h Additional equipment • Pneumatic vices Gujlhcjywy Snsdw Nja • Approximately 40 tool holders • Chip tray Technical Specification Taper Size SK 30

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Mitsubishi, controller model: M80B, table load: 255 kg, spindle speed (max.): 20,000 rpm, HAITIAN PRECISION TAPPING CENTER V-180 SHOWROOM MODEL, AS GOOD AS NEW V-180 specification: Controller:M80B Gujlheywvh Eecdw Nea Spindle air blow Spindle air seal Spindle oil chiller Pneumatic and lubrication system Coolant system Rigid tapping Direct drive spindle 20000rpm 16T disc type ATC 3-color signal lamp,working light X travel mm 500 Y travel mm 400 Z travel mm 330 Spindle nose to table surface mm 150-480 Table size mm 650×400 Table load kg 255 T slot mm 14×125×3 Drive type Direct drive Max.spindle speed rpm 20000 Spindle power (S1/S6) kW 3.7/5.5 Spindle torque (S1/S6) N.m 11.7/17.5 Spindle taper BT30 Pull stud MAS-P30T-1 Rapid traverse (X/Y/Z) m/min 48/48/48 Cutting feedrate (X/Y/Z) m/min 30/30/30 Max.tool dia. (Adjacent/Vacant) mm Φ60 / Φ80 Max.tool length mm 250 Max.tool weight kg 3 Tool change time s 1.6 Positioning accuracy X/Y/Z mm 0.010 Repeatable positioning accuracy X/Y/Z mm 0.006 Power capacity kVA 15 Machine weight t 2.5 Machine size(L×W×H) mm 1620×2080×2380

Condition: used, Year of construction: 2015, X/Y/Z - 350/550/510 mm A-axis (tilting) +30 deg./-120 deg. C-axis 360 deg. Table size 500 mm dia. Max. table load 300 kg. Spindle taper SK 40 Spindle speeds 18.000 rpm Internal high pressure coolant through spindle 35 bar Number of stations in tool changer 40 pcs. Control: Guelhcdeywi Dtjw Nja Siemens Sinumerik 840 D SL Equipped with: Renishaw RMP 600 Chip conveyor

Condition: excellent (used), Year of construction: 1996, operating hours: 9,700 h, DMG Vertical Machining Center Model: DMU 50 V Year of manufacture: 1996 5 axis Travel X-axis: 500 mm Travel Y-axis: 380 mm Gslhcdjyvzq New Noua Travel Z-axis: 380 mm Spindle taper: BT 40 Spindle speed : 8,000 rpm Tools in magazine: 24 piece Control: Deckel Maho Mill Plus Spindle hours: 9700 Interface: RS-232 C 30 tool holders

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Guolhoyvkuqecdw Nea Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo

Condition: used, Year of construction: 2009, functionality: fully functional, Vertical Machining Center Type No: TMV720A Gslhcsyuvivsdw Nsua Working Area (L × W) 800 mm × 480 mm (31.5" × 18.9") Travels X Travel: 480 mm (12.2") Y Travel: 530 mm (20.8") Z Travel: MAX 630 mm (24.8") Distance Between Spindle Table Top: MIN 100 mm (3.9") Max Table Load 500 kg (1100 LBS) Table Height 900 mm (35.43") Rapid Traverse (X/Y/Z) 48 / 48 / 48 m/min Servo Motor X: 1.8 kW Y: 1.8 kW Z: 2.5 kW Spindle Spindle Nose: BT No.40 Spindle Speed: 8000 – 10000 RPM Spindle Motor: 5.5 / 7.5 kW Coolant Motor 0.55 kW (0.75 HP) Tool Selection Random Tool Capacity 24 (MAX) Max Tool Diameter 80 mm (3.14") Max Tool Dia × Length 250 mm (9.84") Max Tool Weight 7 kg Tool Holder BT40 Machine Height 2580 mm Net Weight 3800 kg Floor Space (L × W) 2000 mm × 2380 mm Machine Precision Position: 0.01 mm / full travel Dependable Degree: ±0.005 mm