Cnc World Machine Limited

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, Fanuc Robodrill Alpha T21iFa Vertical Machining Center Year of manufacture: 2011 Control unit: Fanuc 31i Model A5 Axis travels: X: 500 mm Y: 400 mm Z: 330 mm Golhox Ti Scscdw Nebg Spindle speed: max. 10,000 rpm Tool changer: 21 positions, BBT 30 Accessories: Coolant tray, 21 tools, and vise. The machine is in very well-maintained condition. A powered inspection is possible at any time by appointment in 58119 Hagen.

Condition: excellent (used), Year of construction: 2021, Demonstration machine CNC control: SIEMENS 828D OP Axes Travel X-axis mm: 550 Travel Y-axis mm: 550 Travel Z-axis mm: 510 Gbjlhcox Thrzsdw Nog Rapid traverse m/min: 24 Work table: 850 x 650 mm Max. workpiece weight kg: 600 Spindle Max. spindle speed rpm: 12,000 Spindle drive power kW: 13/9 (40/100% duty cycle) Spindle torque Nm: 83/57 (40/100% duty cycle) Cooling Coolant supply through spindle bar: 20 Tool system Tool holder: SK40 Number of tools in magazine: 24 Max. tool diameter mm: With adjacent pockets free mm: Ø130 With adjacent pockets occupied mm: Ø80 Max. tool length mm: 300 Max. tool weight kg: 8 Equipment Electronic handwheel Chip conveyor RENISHAW probe CTS (coolant through spindle) Total power requirement kVA: 20 Main machine: Dimensions/Weight Length mm: 3,070 Width mm: 2,670 Height mm: 2,840 Weight kg: 5,600

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg Gbjlox S Rxnshcdw Njg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: repair required (used), Hyundai SPT-V30T machining centre with automatic tool changer. Powers on but does not start, servo error. Sold for repair or for parts. If you have further questions, we will be happy to assist. Gbolhsx S I Iaocdw Nog

Condition: used, Year of construction: 2012, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 11415584024, For sale is a 5-axis CNC machining center DMG MORI DMU 50 from the year 2012, equipped with Siemens control. The machine is in good, well-maintained condition and was in operation until recently. A powered inspection can be arranged by appointment at any time. The DMU 50 is a vertical machining center with an integrated NC rotary/swivel table, ideally suited for precise 5-axis complete machining of complex workpieces. Typical areas of use include tool and mold making, the manufacturing of precision parts, as well as prototyping and small to medium batch production. Technical data (excerpt): Manufacturer: DMG MORI / Deckel Maho Model: DMU 50 Machine type: Vertical 5-axis CNC machining center Year of construction: 2012 Control: Siemens Number of axes: 5 simultaneous X-travel: approx. 500 mm Y-travel: approx. 450 mm Z-travel: approx. 400 mm Spindle: Vertical motor spindle, up to approx. 14,000 rpm Tool changer: automatic, approx. 30 tool positions Country of manufacture: Germany Working table Swiveling rotary table with simultaneous capability Control system 3D control Siemens 840D solutionline Main drive Spindle speed up to 14,000 rpm SK40 Tool magazine Tool magazine with 60 positions SK40 vertical chain Automation / Measurement / Monitoring Infrared probe TS649 DMG Direct measuring systems X/Y/Z Coolant / Chip disposal Coolant and compressed air switching Flush pistol for chip removal Siemens control options Electronic handwheel General options Operation mode 4 Second cabin door Special features Rotating viewing window (S-K3008) Operating hours (according to meter): Machine hours: approx. 5,991 h Spindle hours: approx. 10,489 h Gbjlhcdwjx S D N Ts Neg Condition & Scope of delivery: Used, fully functional, regularly in operation. Scope of delivery includes the machine as shown; further accessories available upon request. Other information: Location: Birkenfeld (75217)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, For sale is a fully functional machining center of the Chiron type FZ 08 W. Gbelhcex Swg Sedw Nsg

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 380 mm, controller model: Siemens Shopmill, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis: 450 mm Y-axis: 350 mm Z-axis: 380 mm Table size: 700 x 320 mm Spindle speeds: 10.000 rpm Spindle nose: ISO40 Toolchanger: 12 pockets Controller: Siemens Shopmill Featured with: - Cooling unit Golex Stazjhcdw Nobg - Chipconveyor - ISO40 tools - Machine Manuals Country of origin: Taiwan Motor power: 8,5 kW Machine LxWxH: 2450 x 1550 x 2200 mm Machine weight: 2000 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 15,000 rpm, Fanuc Oi-MD CNC control electronical handwheel 24-fold tool changer Gbsljx Slbwohcdw Nsg coolant device chip conveyor Technische Daten / technical details: X-Weg / X-travel 450 mm Y-Weg / Y-travel 400 mm Z-Weg / Z-travel 400 mm Spindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 15000 UpM /rpm Eilgang / rapid feed 36 m/min Tischaufspannfläche / table clamping area 770x410 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel / drive capacity spindle 16 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2019, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: Fanuc RB-A, nominal power (apparent): 11 kVA, controller manufacturer: FANUC, rotational speed (max.): 10,000 rpm, overall weight: 2,300 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,600 h, number of spindles: 1, number of slots in tool magazine: 21, input voltage: 220 V, type of input current: three-phase, Equipment: chip conveyor, FANUC ROBODRILL α-D21iB5 Vertical Machining Center, year of manufacture 03/2019. Commissioned in 2020. Spindle speed: 10,000 RPM. Operating hours: 17,200 h, spindle hours: 13,600 h. The milling machine is equipped with a DDR-T 4th axis rotary table, two independent Schunk pneumatic vices, a Renishaw workpiece probe and tool probe, automatic front doors, automatic side doors, chip flushing system, high-capacity coolant tank, chip conveyor, and oil mist filter. The machine has been operated exclusively in our company since new. Condition: very good. The machine can be inspected in operation – it is still in daily use. Gbelhox Rqkujcdw Njg Type: ROBODRILL α-D21iB5 Catalogue No.: A04B-0120-B133#BHB Serial No.: P193ZH375 Production date: 2019-03 Weight: 2,300 kg Power supply phases: 3 Voltage: 200-220 V Frequency: 50/60 Hz Power consumption: 11 kVA SCCR: 2.5 kA EMC class: EN55011 Group 1 Class A If you have any questions or require further information, please feel free to message or call us.

Condition: used, Year of construction: 2019, operating hours: 12,300 h, functionality: fully functional, machine/vehicle number: Fanuc RoboDrill B, nominal power (apparent): 11 kVA, overall weight: 2,300 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, input voltage: 200 V, type of input current: three-phase, FANUC Robodrill α-D21iB5 Vertical Machining Centre, year of manufacture 07/2019. Commissioned in 2021. Total operating hours: 16,000 h, machining hours: 12,300 h. Used exclusively in our company since new. The milling machine is equipped with a 4th axis DDR-t rotary table featuring two independent Schunk pneumatic vices, a tool probe and a Renishaw workpiece probe, chip flushing system, automatic front doors, oil mist extractor, chip conveyor, and a high-capacity coolant tank. The machine is in continuous operation. Inspection under power possible. Condition: very good. Type: FANUC ROBODRILL α-D21iB5 Serial number: A04B-01213B#B Year of manufacture: 2019-07 Weight: 2,300 kg (machine only) Power supply: 3~ Gbolhox Rqfrscdw Nsg Rated power: 11 kVA Supply voltage: 200–220 V Frequency: 50/60 Hz EMC standard: EN55011 EMC group: 1 EMC class: A SCCr (Short-circuit current rating): 2.5 kA If you have any questions or require further information, please send us a message or contact us by phone.

Condition: defective spare-parts repository (used), Year of construction: 1999, operating hours: 20,151 h, functionality: not functional, machine/vehicle number: 490-43, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 460 mm, table length: 1,150 mm, overall weight: 5,500 kg, spindle speed (min.): 7,200 rpm, number of slots in tool magazine: 20, The hydraulics are faulty and therefore the machine is no longer operational. The machine features a Siemens Sinumerik 840 M control unit and an SK 40 tool holder. The mineral cast machine bed ensures high thermal stability and damping. Possibly suitable for spare parts. Gbolox Rdyijhcdw Neg

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1536000043E, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,500 mm, total length: 3,400 mm, total width: 2,500 mm, table length: 630 mm, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, Machine is still powered on. Technical Specification: Travel distances X = 500 mm Y = 450 mm Z = 400 mm Swivel rotary table (B/C-axis) B-axis: -5° to +110° C-axis: 360° (mostly indexed, partially simultaneous operation possible) Table Clamping surface: Ø 630 mm × 500 mm (round/square) Max. table load: 200 kg (for full 5-axis use; up to 300 kg horizontal) Main spindle Taper: SK 40 (DIN 69871) Speed: 20 – 8,000 rpm (standard for most 2012 Ecoline models) Power: 13 kW (40% duty cycle) / 9 kW (100% duty cycle) Rapid traverse & feed rate X/Y/Z: 24 m/min Tool magazine 20 positions Gelsx N Swmshcdw Nsbg Max. tool length: approx. 300 mm Max. tool weight: approx. 6–8 kg Control: Siemens SINUMERIK 840D (solutionline) with DMG SLIMline® 15" panel + ShopMill interface Machine weight: approx. 4,100 kg Dimensions: approx. 3,400 × 2,500 × 2,400 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 112447, travel distance X-axis: 520 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 360 mm, nominal power (apparent): 9 kVA, table width: 300 mm, table height: 50 mm, table length: 600 mm, rotational speed (max.): 10,000 rpm, overall weight: 1,800 kg, spindle speed (max.): 10,000 rpm, spindle nose: bt30, number of slots in tool magazine: 14, input voltage: 380 V, type of input current: three-phase, Due to duplicate equipment: Brother TC 229, conversational description, 14 tools in BT 30, 10,000 rpm. One tool-change fork is broken but still picks up tools. Currently in operation until sold. Very easy to operate, ideal for single parts or production runs, lightning-fast part setup. Engraving, tapping, milling, etc. Sold with chip tray and water pump. Ready to use but without tools, vises, or rotary table. Clean machine that works reliably every day. Loading on site possible. Gbelhex N Ncyscdw Njg

Condition: ready for operation (used), Year of construction: 2012, Main Drive Spindle speed range 12000 Tool taper HSK-A 50 Number of axis 3 Max payload Up to 5 kg Gslhcdwsx Nr I Eo Nebg Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 320 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 360 mm Z-Axis Rapid Traverse 60 m/min Table Table load 500 kg Tools Max weight 5 kg The system consists of: 2 x CHIRON FZ 12 KW (2012) + 2 x Fanuc LR Mate 200iC (2011) + 2 x Fanuc M - 20iA (2011) + Waschstraße. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. Each machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 1997, BAZ Fanuc Robodrill14 i XYZ: 500/380/300 8000 rpm Fanuc 16 M Accessories: 3 x face mill holders 4 x drill chucks Gjlhcsx Ncv Todw Nebg 1 x MK2 holder 3 x collet holders 2 x 10 mm Weldon 3 x 6 mm Weldon 1 x CNC rotary table Fibro 150 Documentation

Condition: good (used), Mori Seiki SV-500/50 4 Axis Vertical Machining Centre with Mori Seiki MSC-501 CNC Control, Table Size 1100mm x 600mm, 40 Tool ATC, BT50 Spindle Taper, Cool Jet 70 - 30 DF High Pressure, Coolant Filtration Unit, Filtermist FX7002 Oil Mist Extractor, Spindle Speed Max 6000rpm, Renishaw Tool Probe Eye, Machine Weight 7800kg. S/No. 1864 Includes Various BT50 Spindle Tool Holders in ATC and Boxes Gbolhjx Nap Djcdw Nsg

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements height 2390.1 mm Machine weight 2636 kg Control Unit Brand HURCO Model WinMax Main Drive Spindle speed range 8000 rpm Number of axis 3 Movement Gbelhcdwjx I S Rde Njg X-Axis Movement 457 mm X-Axis Rapid Traverse 19 m/min Y-Axis Movement 356 mm Y-Axis Rapid Traverse 19 m/min Z-Axis Movement 356 mm Z-Axis Rapid Traverse 19 m/min Table Table load 250 kg Tools Number of index 16 Max weight 7 kg Max tool diameter 90 mm Max tool length 200 mm Type of tool holder CAT/BT 40 This 3-axis Hurco VM5i vertical machining center was manufactured in 2016. It offers robust construction and precision engineering, ideal for a variety of machining tasks. Consider the opportunity to buy this Hurco VM5i vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Gelhcdwsx I Nr Es Nsbg Parts shown by hand not come. Toolholders will come without cutting tools.

Condition: used, Year of construction: 2005, Technical details: x-travel: 750 mm y-travel: 406 mm z-travel: 508 mm weight of the machine ca.: 4 t bore spindle turning speed range: 12.000 U/min HAAS VF-2 is a 3-axis machining center designed for precision, high accuracy and reliability. Gbolhcsx Iwr Tsdw Nsg *

Condition: used, Year of construction: 1995, x-travel 650 mm Golhex Iwg Recdw Njbg y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 580 mm, Matsuura MAM72 – 35V (5 axis) CNC Machining Centre Year: 2006 Control: Matsuura G-Tech 16i Model: MAM72-35V Travels X/Y/Z: 550 / 440/ 580mm Travels B/C: +65 – 110 degrees / 360 degrees Gbjlhcdsx H Aagow Nog Working Surface: 130mm dia. Max. Work Size: 350mm dia. x 300mm H Loading Capacity per pallet: 60 kg Spindle Speed: 15,000 RPM Spindle Taper: BT 40

Condition: good (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: SIEMENS 840 D Solution Line, number of spindles: 2, number of slots in tool magazine: 32, Equipment: chip conveyor, rotational speed infinitely variable, - Twin-spindle machining centre Gelhcdex E Sr Njw Njbg - 5 axes - Automatic tool changer with 2x 16 tool positions Further details available on request.

Condition: good (used), Year of construction: 2003, for sale Fehlmann Picomax 60 M Machining Centre year 2003 Specification: Machine type: Vertical CNC machining centre, 3 axes (expandable to 5) CNC control: Heidenhain iTNC 530 Travel (Stroke): X-axis (Longitudinal): 505 mm Y-axis (Transversal): 355 mm Z-axis (Vertical): 610 mm Table size: 920 mm x 380 mm Max spindle speed: 18,000 rpm or 20,000 rpm Spindle taper: SK 30 (or ISO 30) Tool magazine: 24 positions Machine weight: approx. 3,200 kg unplugged BT MACHINES Gslhcsx E R Dkedw Nebg PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand HEIDENHAIN Model iTNC 530 General Data Machine weight 3600 kg Main Drive Spindle speed range 20 - 10000 RPM Spindle motor power 9 / 13 kW Tool taper SK 40 Number of axis 5 Movement Gbelhjx E D U Aocdw Njg X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Additional Equipment Tool Positions: 16 / Max. Tool Weight: 6 kg / Max. Tool Length: 300 mm Max. Tool Diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm Total Power Requirement: 17 kVA No chip conveyor included / No automatic measuring probe included / No tools included This 5-axis DMG DECKEL MAHO DMU 50 vertical machining centre was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 RPM, and a rotary table with a clamping surface of 630 x 500 mm. The machine has undergone significant overhauls, including a complete X-Axis bearing replacement and new coolant pump installation. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 machine we have for sale. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2018, operating hours: 502 h, functionality: fully functional, machine/vehicle number: 1154161, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 394 mm, rapid traverse X-axis: 61 m/min, rapid traverse Y-axis: 61 m/min, rapid traverse Z-axis: 61 m/min, feed length X-axis: 508 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, feed rate X-axis: 31 m/min, feed rate Y-axis: 31 m/min, feed rate Z-axis: 31 m/min, nominal power (apparent): 20 kVA, torque: 46 Nm, controller manufacturer: HAAS, controller model: HAAS NGC (Next Generation Control), workpiece length (max.): 660 mm, workpiece width (max.): 381 mm, workpiece height (max.): 394 mm, workpiece weight (max.): 113 kg, total height: 2,489 mm, total length: 1,626 mm, total width: 2,083 mm, table width: 381 mm, table length: 660 mm, table load: 113 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, overall weight: 2,722 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 502 h, coolant supply: 20 bar, distance table to spindle center: 495 mm, spindle motor power: 11,200 W, number of spindles: 1, number of slots in tool magazine: 21, mount diameter: 30 mm, tool length: 127 mm, tool diameter: 76 mm, tool weight: 1,800 g, input voltage: 400 V, type of input current: three-phase, HAAS DT-1 High-Speed Drilling/Tapping Center - Excellent Condition - Only 502 Spindle Hours Exceptionally well-maintained HAAS DT-1 vertical machining center with very low hours. This compact, high-speed machine is ideal for drilling, tapping, and light milling operations in aluminum, steel, and other materials. Full details are available (including all invoices) through a website build for this machine. Machine History: - Built: August 2018 - 2018-2021: Demo machine at Landré (official HAAS distributor Netherlands) - October 2021: Purchased by IMBU BV - 2021-2025: Used exclusively for prototyping - never production work - December 2025: Full service by Landré (service report available) Condition: Outstanding condition for its age. Only 502 spindle hours and 1,764 power-on hours. The machine has been carefully maintained and used only for prototype development, resulting in minimal wear. Installed Options: - 15,000 RPM spindle (11.2 kW, BT-30) - Through Spindle Coolant (TSC) 20 bar with 25 micron fine filter - Renishaw Wireless Probing System (WIPS-R) for tool and workpiece measurement - 4th axis interface with wiring (ready for rotary table) - 5th axis interface with wiring - High Speed Machining (HSM) - 80 block look-ahead - Dynamic Work Offsets (DWO) & Tool Center Point Control (TCPC) - Programmable coolant nozzle (34 positions) - Automatic chip auger Software Options: Macros, Rotation and Scaling, Rigid Tapping, M19 Spindle Orient, VPS Editing, Media Display, Wireless Networking, Compensation Tables, 1GB Max Memory Technical Specifications: Gslhcex E Au Uedw Nobg - Travel: X=508mm, Y=406mm, Z=394mm - Rapid traverse: 61 m/min (all axes) - Table size: 660 x 381 mm - Table load: 113 kg - Tool changer: 20+1 side-mount - Spindle nose to table: 102-495 mm - Coolant tank: 208 liters - Machine weight: 2,722 kg - Dimensions (L x W x H): 1626 x 2083 x 2489 mm - Power: 400V 3-phase Machine Data (from controller): - Power-on hours: 1,764 - Spindle hours: 502 - Feed cutting time: 337 hours - Tool changes: 13,803 - Programs completed: 3,896 Included: - Complete machine documentation - All original invoices (machine, tooling, accessories) - Landré service report December 2025 - Renishaw wireless probing system (tool probe + workpiece probe) ALSO INCLUDED: Extensive set BT-30 toolholders (list attached), Ceratizit cutting tools, and Lang Quick-Point clamping system (list attached). Total investment approx. €25,000. Location: Netherlands Reason for sale: Company restructuring All documentation available on website. Inspection welcome by appointment.