Vertical machining center
FANUC Robodrill α-T21iF / BT30

Name: FANUC Robodrill α-T21iF / BT30
Brand: FANUC
Availability: InStock

Year of construction

2008

Condition

Used (fully functional)

Location

Czech Republic

Vertical machining center FANUC Robodrill α-T21iF / BT30

Machine data

Machine type:: Vertical machining center

Manufacturer:: FANUC

Model:: Robodrill α-T21iF / BT30

Year of construction:: 2008

Condition:: like new (used)

Functionality:: fully functional

Operating hours:: 4,322 h

Price & Location

Location:: Tomešova 1a, 602 00 Brno, Česká republika

Call

Details about the offer

Listing ID:: A22781345

Update:: 18.09.2026

Description

FANUC ROBODRILL α-T21iF | 4,322 hours | 24,000 rpm | BT30

FANUC ROBODRILL α-T21iF – High-Speed CNC Machining Center

A very well-maintained FANUC ROBODRILL with very low operating hours – approximately 4,322 run hours.

The machine was manufactured in Japan in December 2008 and is equipped with a FANUC Series 31i-Model A5 CNC control, a high-speed 24,000 rpm spindle, and fast axis movements of up to 54 m/min.

The machine is in very good technical and visual condition and can be inspected and demonstrated under power by prior arrangement.

Approximately 50 pcs. of BT30 tool holders of various types and sizes are included in the price.

Technical specifications
Manufacturer: FANUC
Model: ROBODRILL α-T21iF
Type: A04B-0099-B112#BM
Year of manufacture: 12/2008
Country of origin: Japan
CNC control: FANUC Series 31i-Model A5
Run time: approximately 4,322 hours
X-axis travel: 500 mm
Y-axis travel: 400 mm
Z-axis travel: 330 mm
Rapid traverse X/Y/Z: up to 54 m/min
Maximum spindle speed: 24,000 rpm
Spindle taper: BT30
Automatic tool changer: 21 positions
Maximum table load: 300 kg
Machine weight: approximately 2,100 kg
Power requirement: 10 kVA
Power supply: 3-phase, 200/220 V, 50/60 Hz
CE marked: Yes
Included in the price

Approximately 50 pcs. of BT30 tool holders / clamping holders of various types and sizes.

IMPORTANT
Iiedpfsz Diqbsx Afhsg

The rotary table / 4th axis shown installed in the machine in the photographs is NOT included in the sale.

The machine is available for inspection and demonstration under power by prior appointment.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2025

25 listings online

Call

Send inquiry

Telephone & Fax

+420 530 ... show

These listings may also fit your interest.

Listing

5-axis machining center FANUC ROBODRILL ALPHA T14i B

Brügg

1,181 km

5-axis machining center
FANUCROBODRILL ALPHA T14i B

Call

Condition: used, FANUC ROBODRILL ALPHA T14i B is a Vertical machining center engineered for high precision, strong accuracy and reliability. Table 550×380 mm; travels X500 Y400 Z330 mm; vertical distance 150–450 mm. Spindle 100–12,000 t/min (stepless), feed 1–15,000 mm/min, rapid 48 m/min; spindle motor 5.5 kW; 3×400 V; total power 9 kVA; weight ≈2100 kg; size 1600×2000×2200 mm. Tool magazine 14 stations; 4th-axis divider Peiseler; oil-mist extractor Elbaron. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Iodpfx Afjyxnyioheig

See details

Listing

Milling machining centers - vertical FANUC Robodrill a-D21miA5

Wilbertoord

736 km

Milling machining centers - vertical
FANUCRobodrill a-D21miA5

Call

Listing

Vertical machining center FANUC ROBODRILL α-T14iFb

Castellbisbal

1,597 km

Vertical machining center
FANUCROBODRILL α-T14iFb

Call

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31iB5, table width: 550 mm, table length: 380 mm, Equipment: documentation/manual, FANUC ALPHA T14iFb VERTICAL MACHINING CENTER, MANUFACTURED IN 2015 Isdpfxjy Tvnws Afheig EQUIPPED WITH FANUC 31iB5 CONTROL ELECTRONIC HANDWHEEL TRAVEL: X 500, Y 400, Z 330 MM TABLE SURFACE: 550 x 380 MM DIRECT DRIVE SPINDLE, 24,000 RPM SPINDLE COOLANT SYSTEM

See details

Listing

Vertical machining center FANUC ROBODRILL α-D21LiA5

Logrezana

1,328 km

Vertical machining center
FANUCROBODRILL α-D21LiA5

Call

Condition: ready for operation (used), Year of construction: 2013, TECHNICAL DATA Brand: FANUC Model: ROBODRILL α-D21LiA5 Year: 2013 CNC: FANUC 31i-MODEL B5 Serial Number: P135 YH478 TABLE DIMENSIONS Table size: 850 x 410 mm Load capacity: 300 kg T-slot spacing: 125 mm Number/size of T-slots: 3 x 14 mm TRAVELS X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Distance from table to spindle nose: 150 to 480 mm FEEDS Rapid traverse X/Y/Z: 54 m/min Cutting feedrate: 1 to 30 m/min MOTORS Drive motor: 11 kW (1 min) / 3.7 kW continuous Feed motors X/Y/Z: α8/4,000is (2.9 kW) TURRET Taper: MAS BT 30 Drawbar type: MAS P30T-1 (45°) Column to spindle center distance: 400 mm PRECISION Positioning accuracy: 0.006 mm Iijdpjy At Aqjfx Afheg Repeatability: ±0.004 mm Tool magazine capacity: 21 Maximum tool length: 250 mm Tool change time: Approx. 1.8 s SPINDLE Spindle speed range: 100 to 10,000 rpm Spindle taper: 7/24 Taper No. 30 Internal cooling MACHINE DIMENSIONS Machine height: 2,236 ± 10 mm Floor space required: 2,115 x 2,040 mm Machine weight (including control section): Approx. 2,100 kg POWER SUPPLIES Electrical supply: 11 kVa Compressed air requirement: 0.35 to 0.55 MPa (gauge pressure) (0.5 MPa recommended), 0.15 m3/min (150 l/min) (at atmospheric pressure) ACCESSORIES Original FANUC 4th axis rotary table DDR (new price €18,000) Zero point clamping system Schunk NSE plus 138-V1 mounted on rotary (new price €2,100) Two Schunk KONTEC KSM2 90-400 vices (new price €2,000 each)

See details

Listing

Vertical machining center FANUC ROBODRILL α-D21MiB5 PLUS

Contamine-sur-Arve

1,236 km

Vertical machining center
FANUCROBODRILL α-D21MiB5 PLUS

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] Iedpfjxcbt Uox Afhjig TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : BLUM Z NANO

See details

Listing

Vertical machining center HAAS Super Mini Mill

Aucamville

1,349 km

Vertical machining center
HAASSuper Mini Mill

€10,990

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 406 mm, travel distance Y-axis: 304 mm, travel distance Z-axis: 254 mm, Haas #Mini-Mill vertical machining center, automatic tool changer (10 positions), travels X 406 mm / Y 304 mm / Z 254 mm. Tool changer: carousel type / Capacity: 10 tools Spindle speed: 10,000 rpm. Iodpezxzfpjfx Afhsig Ideal for series production of precision CNC-machined parts.

See details

Listing

Vertical machining center FANUC ROBODRILL α-D21MIA5

Contamine-sur-Arve

1,236 km

Vertical machining center
FANUCROBODRILL α-D21MIA5

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 5 Iedpfszhxwzex Afheig MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : Nikken 5AX-201 - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE

See details

Listing

Bruntál 1

1,525 km

Vertical machining center
FanucT21iF

€22,000

EXW Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2008, operating hours: 3,088 h, functionality: fully functional, machine/vehicle number: P08ZWG962, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, feed rate X-axis: 54 m/min, feed rate Y-axis: 54 m/min, feed rate Z-axis: 54 m/min, total height: 2,336 mm, total length: 1,565 mm, total width: 2,027 mm, table width: 400 mm, table length: 650 mm, table load: 300 kg, overall weight: 2,100 kg, spindle speed (min.): 24,000 rpm, distance table center to spindle nose: 250 mm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, The machine is in very good condition and has been used sparingly. It has only processed aluminum alloys. The machine comes with various tool holders, as shown in the photo – thermal tool holders, Weldon tool holders, etc., a total of 47 pieces. It also includes a probing sensor: Garant Hoffmann 359500 – a 3D digital sensor with a tactile probe. The spindle has a BT30 tool holder taper. The video shows the machine with a 4-5 axis configuration, but this is not included in the sale. Direct sale to end-users only. Iisdpfxozw Iv Es Afheg W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

See details

Advertise here