Fourmark Manufacturing Inc.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Dodpszza Egjfx Aggjwb Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: used, Year of construction: 2012, machine number type model year clamping force distance between opening stroke screw shot volume tie bars diameter ton mm mm mm cm3 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive Dsdpfjzykziox Aggswb 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 2494 E-screwdrive 14 5500-5600 SXN 2000 550 830x830 850 98 3394 Hydraulic motor 15 5500-5650R 2K S+ 2009 550 830x830 850 84 1247 E-screwdrive 16 5500-5650R 2K S+ 2011 550 830x830 850 84 1247 E-screwdrive 17 6600-8650R S+ 2008 660 900x900 940 98 1886 E-screwdrive 18 6600EP-8650 S+ 2009 660 1000x1000 1200 115 5349 E-screwdrive 19 6600-8650R S+ 2010 660 900x900 940 98 1886 E-screwdrive 20 12000-19000 SXN 2003 1200 1200x1200 1500 150 12193 Hydraulic motor

Condition: ready for operation (used), Year of construction: 2008, operating hours: 45,000 h, clamping force: 8,000 kN, screw diameter: 120 mm, Hydraulic injection moulding machine manufactured in 2008. This HAITIAN SA8000 features a clamping force of 8,000 kN and an injection volume of 5,768 cm³, making it suitable for various applications. The machine is equipped with a screw diameter of 120 mm and has undergone recent servicing, including a new nozzle filter installed in 2023. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN SA8000 machine we have for sale. Contact us for further details. • Injection volume: 5,768 cm³ • Installed power: 163.55 kW • Power supply: 380 V / 50 Hz • Estimated operating hours: ~45,000 h • Last used in production: 03 Apr 2025 • CE marking: Not available • Maintenance/Upgrades: • Screw and barrel replaced: Sep 2022 • Back-pressure unit serviced Dedpfxszx Ukxe Aggswb • Measuring scale serviced Additional equipment • Nozzle filter: HASCO H109/25 × 50 × 1.2 (installed 2023)

Condition: like new (used), Year of construction: 2022, clamping force: 5,500 kN, Equipment: documentation/manual, HAITIAN JU5500III/2230 – Technical Data Servo Screw diameter: 65 mm Shot volume: 1,068 cm³ Shot weight (PS): 972 g Injection speed: 372 g/s Plasticizing capacity (GPPS): 60.0 g/s Plasticizing capacity (HDPE): 85.7 g/s Dwodpfx Aozx D Hisggsb Max. injection pressure: 212 MPa Injection pressure: 182 MPa Injection stroke: 322 mm Screw speed: 0–225 rpm Heating power: 33 kW Clamping force: 5,500 kN / 550 tons Tie-bar spacing (H × W): 920 × 830 mm Max. mould height: 1,100 mm Min. mould height: 350 mm Mould opening stroke: 1,500 / 750 mm Max. daylight: 1,850 mm Ejector stroke: 350 mm Ejector force: 110 kN Number of ejectors: 21 Pump motor power: 45 + 18.5 kW Oil tank capacity: 640 L Machine dimensions (L × W × H): 8.59 × 2.84 × 2.46 m Machine weight: approx. 22 tons Minimum mould dimensions (L × W): 645 × 580 mm

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN Dwedpfszvwirox Aggeb • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Dsdpfxezvm T Ts Aggjwb Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Dsdpfx Agozvm E Aogswb Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Dwjdpfjzvm Dlex Aggeb Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: good (used), Year of construction: 2000, Krauss Maffei KM 800-8100 injection molding machine Year of manufacture: 2000 Serial number: 8I181A5 Control system: Krauss Maffei MC4 Technical data Clamping force: 8000 kN (800 t) Screw diameter: 95 mm L/D ratio: 23:1 Injection volume: 3721 cm³ Injection weight (PS): 3386 g Injection pressure: 2172 bar Maximum cylinder temperature: 375°C Screw speed: 126 rpm Injection rate: 659 cm³/s Plasticizing rate: 112 g/s Nozzle closing force: 166 kN Clamping unit Dimensions of mounting plates: 1600 × 1530 mm Distance between columns: 1120 × 1000 mm Opening stroke: 1400 mm Minimum mold height: 600 mm Maximum mold height: 1100 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 59 kN (front / rear) Electro-hydraulic system Pump motor power: 110 kW Installed heater power: 61 kW Number of heating zones: 7 Number of dry cycles (EUROMAP): 560 cycles/h Oil tank capacity: 1500 l Motor current: 235 A Total current consumption: 455 A Main fuse: 2 × 250 A Equipment Control system: Krauss Maffei MC4 Robot interface: Euromap 12 Dwedpfx Aezrw Adjggob Hydraulic cores: 4 pcs. Pneumatic valves: 4 pcs. Robot preparation: Yes Central lubrication system: Yes Oil cooling system: Yes Dimensions and weight Length: approx. 10,600 mm Width: approx. 2860 mm Height: approx. 2410 mm Weight: approx. 47,000 kg

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Screw diameter: 130 mm L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Injection pressure: 1296 bar Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Dwsdpfszrwy Aox Aggob Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Dwsdpfx Aozqdagoggob Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: used, Year of construction: 2016, Manufacturer: KRAUSS MAFFEI, Type: KM 850-6100/1400 MXZ Blue Power, Year of manufacture: 2016, Serial number: 61024868, Control system: Krauss Maffei MC5, Clamping force: 850 t, 2 injection units, Rotary table, Installation height min./max. 500/960 mm, Daylight opening 1,120 mm, 48 hot runner nozzles, hydraulic core pull systems 2 (DS) 3 (AS), Screw diameter 95/60 mm, Shot weight 3,200/500 g, Parts removal robot, Manufacturer: Krauss Maffei, Type LRX350, Year of manufacture: 2016, Serial number: 2114889, Conveyor belt, 3,000 x 800 mm 37,544 hours (25,846 net production hours) Dodezn Ap Ispfx Aggewb Note: Machine is part of an online auction!

Condition: ready for operation (used), Year of construction: 1999, operating hours: 82,539 h, clamping force: 8,000 kN, screw diameter: 105 mm, Hydraulic injection moulding machine manufactured in 1999. This Krauss Maffei KM800-5700 MC features a clamping force of 8000 kN and an injection unit size of 5700. It has a maximum mould height of 1,100 mm and an opening stroke of 1,400 mm. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei KM800-5700 MC machine we have for sale. Contact us for further details. Dwedpfx Ageznuxhjgeb • Clamping Force: 8000 kN • Injection Unit Size: 5700 • Screw Diameter: 105 mm • Number of Hydraulic Core Pulls: 4 • Air Valve: 1 (AS) • Operating Hours: Approx. 82,540 h • Mould Height (Min.): 600 mm • Mould Height (Max.): 1,100 mm • Opening Stroke: 1,400 mm • Platen Dimensions: 1,300 × 1,300 mm • Tie Bar Distance (Horizontal): 1,120 mm • Tie Bar Distance (Vertical): 1,000 mm • Centering Ring Diameter: 250 mm • Water Circuits: 8 per Platen • Service History: Inspected and Pump Connections Sealed by Krauss Maffei in 2025 • Machine Condition: Operational • Conveyor Belt: optional • Handling System: optional

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 182,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 116,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Djdpfx Ajznlhmsggjwb

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Dwedpfozncmajx Aggjb Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: X55766, clamping force: 5,500 kN, screw diameter: 98 mm, clearance between the columns: 830 mm, displacement volume: 3,394 cm³, 550-ton machine in good condition. Djdpfszlt Aajx Aggjwb

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66931, clamping force: 6,600 kN, screw diameter: 98 mm, clearance between the columns: 900 mm, displacement volume: 3,885 cm³, injection pressure: 2,100 bar, This machine underwent a complete overhaul and was retrofitted in 2023. Dedpfezlrc Sex Aggjwb

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Clamping Side: Clamping Force: 5000 kN Dedezgwbvspfx Aggowb Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Dodpfx Aszgwbcjggewb Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Operating hours in automatic mode: 60,000 h Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Injection unit Screw diameter: 80 mm Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Net weight with control cabinet: 27,090 kg Dwsdpfx Agezgwa Eogsb Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg Dwjdszd Ta Njpfx Aggjb

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 105 mm, displacement volume: 4,546 cm³, Clamping unit: Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 153 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 121 1/min Plasticising rate max. 144 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 57 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 45000 kg Max. mould weight 12200 kg Accessories: Djdszd Er Rspfx Aggjwb - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR300 X: 1200 mm, Servo Y: 1000/1000 mm, Servo Z: 3500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve - 2 x core pulls on movable plate - Accumulator - 8 x hot runner controller - Robot interface according to Euromap 67

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL duo 3660/650 tech Year: 2025 Control: CC300 Integrated robot: ENGEL VIPER 40 Clamping force: 650 t Injection unit: 810 Screw diameter: 80 mm Possible screw diameters: 55 / 60 / 70 / 80 mm Shot volume: 1810 cm³ Injection capacity: 1660 g PS Dwodpfx Agjza Au Nogsb Injection pressure: 1800 bar (max. 2000 bar) Injection speed: 493 cm³/s Screw stroke: 510 mm Screw torque: 3600 Nm Max. screw speed: 210 rpm Plasticising rate: up to 118 g/s Nozzle orifice: 12 mm Tie bar distance (H x V): 1110 x 960 mm Platen size (H x V): 1510 x 1440 mm Opening stroke: 1800 mm Max. daylight opening: 1950 mm Mould height min./max.: 350 - 1200 mm Dry cycle: 2.8 s Ejector stroke: 250 mm Ejector force: 105 / 51 kN Installed drive power: 74 kW Oil tank capacity: 750 l Equipment: * ENGEL VIPER 40 integrated robot * 2-fold hydraulic core pull on moving platen * Tool heating with 32 control circuits * Hydraulic machine

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, clearance between the columns: 1,120 mm, injection pressure: 1,795 bar, ejector stroke: 250 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Injection force: 8,000 kN Distance between columns (h x v): 1,120 mm x 1,000 mm Maximum mold opening distance: 1,400 mm Minimum/maximum tool installation height: 600 mm / 1,100 mm Opening stroke of the clamping plate: 2,000 mm Ejector stroke: 250 mm Ejector force: 226 kN (rearward: 59 kN) Injection unit Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Injection volume: 3,367 cm³ Injection size for PS: 3,064 g Injection capacity: 690 cm³/s Nozzle clamping force: 166 kN MACHINE DETAILS Control model: MC4 Djdpfx Asy Ulhcjggewb Connected power of pumps: 90 kW Heating power: 61 kW Dimensions & Weight Machine dimensions (L x W x H): 10.4 m x 2.86 m x 2.39 m Net weight: 45 t Transport dimensions Closing unit - Dimensions (LxWxH) 6000x2740x2390mm / Weight 30t Injection unit Dimensions (LxWxH) 6200x2620x2300mm / Weight 16t

Condition: excellent (used), Year of construction: 2007, operating hours: 102,000 h, clamping force: 6,500 kN, DUO 5550/650 Advanced Year 2007 Clamping force: 6500 kN Screw: D90, S6, tempered, with flight armouring and ionitriding, abrasion resistant Control unit: CC200 A01 Languages: Slovenian (SL), German (DE) Operating hours: 102,000 1x core mowing platen 1x core pull, additional, on movable platen Mold height increase of 200 mm Variant C, according to the technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mold heating control Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Cooling water flow regulator, 10-way Magnetic mold clamping platen system TECNOMAGNETE, temperature resistant up to 120 degrees C, incl. interface Euromap 70.1, nozzle adaptation and assembly ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Total Y-axis length: 900 + 900 mm (tandem) Z-total: 2360 mm C-axis (125 Nm) Dwjdpfx Agey Ug Ahogsb 2 switchable vacuum/compressed air circuits RC 200 integrated with C30 E handheld control unit