Used Metalski Zavod Tito Skopje for sale (32)

Year of construction: 1990, condition: reconditioned (used), Year of renovation: 2010 Output kVa: 1375 Volt: 6300 V Dkjdpfx Aoini Hwjkiop Total weight: 74000 kg Other information: 1,16 MW Diesel Generator, Completely renewed

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 275 h, The mobile loader RVM - 180E is a single-axle trailer with a receiving platform and unloading auger. Along the entire length of the lower section of the platform, there are 8 (eight) augers, each 3,000 mm long and Ø 130 mm, and one movable auger 2,100 mm long with a Ø of 300 mm, all covered at the top by special protective grates. In the center of the loader, there is a folding unloading auger with a diameter of 400 mm, operated by a hydraulic cylinder. Please omit the electrical section in the manual, as these devices do not have an electric motor; they require a tractor for operation. Djdpfx Akexqx Rmsijkp

Condition: excellent (used), Year of construction: 2017, working range: 4,000 mm, overall weight: 6,500 kg, total width: 2,400 mm, total height: 2,600 mm, total length: 6,000 mm, Working area X Axis:4000mm Working area Y Axis:2000mm Working area Z axis:400mm Power resonator: 300kW / Amp Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Dkedpfjy T Hywsx Akijp Feed rate Z-Axis: 10000mm/min. Dust collector: Kemper Length: 6000mm Width: 2400mm Height: 2600mm Weight: 6500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, “Functionality tested; item originates from the dismantling of equipment at an automotive supplier.” Dkedpfxszhn Dds Akiep Quantity: 8 available Manufacturer: TRUMPF Type: Panel Computer Multitouch E741095 Display: 10.4″ (1024 × 768 px) CPU: AMD GX-415GA SoC, 4-Core, Radeon HD Graphics Ports: COM, DVI, 2× USB, 2× LAN Weight: approx. 2.0 kg

Condition: used, functionality: fully functional, 4 units available “functionally tested; item originates from the dismantling of equipment from an automotive supplier” 6AV7240-0HC07-0PA0 Siemens Multitouch Display SIMATIC IPC 477D, 15" Multitouch Display; Dksdpfezhnxnex Akijp 4 USB (rear); no USB (front); Ethernet (10/100/1000); Celeron U827E; 2x Gbit Ethernet (IE/PN); 4 GB; 1x RS-232; no PCIE; Windows 7 Ultimate, 64 Bit; no removable drive; SSD 240 GB standard (MLC); no SIMATIC software; 24V DC industrial power supply.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, product width (max.): 250 mm, working width: 247 mm, number of drawers: 4, roll width: 250 mm, roll diameter: 600 mm, inner diameter: 76 mm, EDALE ALPHA 250 year 2007 web width 250mm 4 - color 4 - IR dyer's 2 - die stations 4-anilox 4 doctor blades web camera slitting web guide 2 sets of print cylinders 8pcs Dkodpfx Aoyrzy Uskisp 2 magnetic cylinder condition very good In production Can be see any time

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, overall weight: 145 kg, load capacity: 12 kg, arm reach: 1,441 mm, pivoting range: 340 °, controller manufacturer: fanuc, controller model: R-30iB Plus, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.02 mm, The robot and its accessories are in like-new condition. No damage. Only 300 hours of operation. TOP condition! Sale without robot pedestal and without gripper (end-effector). Robot: FANUC M-10iD/12 Controller: R-30iB Plus Fanuc Teach Pendant included Dsdpfx Aksy Ntvwsiokp Expandable IO Cards: 32x Input 24V DC, 16x Output 24V DC and cabling. The M-10iD/12 robot offers industry-leading axis speed and precision. Its slim and lightweight design allows easy use in confined spaces, increasing productivity. The compact arm and wrist minimize interference with peripheral devices and optimize operational efficiency. When mounted upside-down, this highly versatile robot provides full work envelope, reach, and lifting capacity to enhance production throughput. Thanks to its smooth surface that prevents dust accumulation, this robot delivers reliability in various industrial environments.

Year of construction: 1980, operating hours: 36,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Dodpfx Asvuquvjkiokp

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Power: 45 kW (60 HP) Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C). Dkedjyx Etgopfx Akiep

Condition: used, Year of construction: 2001, GIANAZZA Vacuum Evaporator - Grape Must Concentration Plant Dkjdpfjy R I Dxsx Akisp Description: Professional industrial plant for the concentration of grape must and fruit juices. Manufactured by the world-renowned Italian specialist Gianazza Technology, this system is designed for high-quality production, preserving the organoleptic characteristics of the product through low-temperature vacuum evaporation. Technical Specifications: Manufacturer: Gianazza Technology SpA (Italy) Year of Construction: 2001 Material: High-grade Stainless Steel (Inox) System Type: Multi-stage Vacuum Evaporator Components Included: * Main Evaporation Columns Complete Control Panel (Digital PID Controllers) Pumping Station (Salvatore Robuschi centrifugal pumps) External Cooling Tower / Heat Exchanger unit Stainless Steel Storage/Buffer Tank Condition: Professional industrial condition, regularly maintained within a winery environment. Applications: Enrichment of grape must (Sugar concentration). Production of Rectified Concentrated Must (RCM). Fruit juice concentration.

Condition: used, Year of construction: 2004, functionality: fully functional, SIPREM INTERNATIONAL PCM 400 Professional continuous pneumatic membrane press for high-volume grape processing. Model: Siprem PCM 400 Type: Continuous Membrane Press Processing Capacity: 32 - 45 Tons/hour (Fresh grapes) Max Capacity: Up to 55 Tons/hour (Fermented Djdpey R I Drsfx Akiekp grapes) Year: 2004 Weight: 13,000 kg Condition: Excellent industrial condition, fully operational. Key Advantage: Unlike batch presses, this system allows for uninterrupted 24/7 grape processing with high-quality must extraction.

Condition: used, Title: High-Quality Stainless Steel Wine Storage Tanks (50,000L - 400,000L) Description: For sale: Professional vertical stainless steel (Inox) storage tanks suitable for wine, Dksdsy R I A Iopfx Akiop juice, or other food-grade liquids. The tanks are in good industrial condition and were previously used in a winery. Technical Details: Capacity: Range from 50 Tons (500 hl) up to 400 Tons (4,000 hl). Material: High-grade Stainless Steel (Inox). Type: Vertical cylindrical tanks with reinforced structures. Features: Manholes, cooling jackets (if applicable), level indicators, and discharge valves. Condition: Used, well-maintained. 50ton-47pcs 60ton-20pcs 100ton-14pcs 200ton-18pcs 400ton-16pcs 78ton-9pcs Verifikator

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Paper cup 7OZ year of production 2022 ed 110 cup/min Dodpfx Aeyrz Apjkiekp Auto lubricating Cup colector

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, NEWFOIL 2000 MKII year 1996 web with 125mm Dksdpfx Akeyrzzfjiop Max. printing area 125x150mm Max. die cutting area 125x150mm Speed 6000 cycles Re-register cell can use 2-foils unwind rewind

Year of construction: 1981, condition: excellent (used), functionality: fully functional, loading space volume: 4.5 m³, machine/vehicle number: 50431, High-capacity industrial mixer with heating jacket and explosion-proof motor. Dodpfsyy Sztjx Akiekp Manufacturer: Draiswerke GmbH (Germany) Model: S-4500 Year: 1981 Total Volume: 4500 Liters Jacket Volume: 270 Liters (Heating/Cooling) Operating Temp: Max 150°C Jacket Pressure: 3 bar Motor: 30 kW AEG (Explosion-Proof / Ex-rated) Power: 380V / 50Hz / 1480 RPM Key Features: Horizontal Jacketed Design: Suitable for steam heating or water cooling. Robust Build: Designed for powders, granules, and heavy industrial pastes. Included: Industrial reduction gearbox, access platform, and stairs. Condition: Used, functional, high-quality German engineering.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 720 mm, Model: SFML-720C Dedpfx Ajyxl Tyskiekp Weight: 840 kg Power: 8.5 kW Voltage: 220 V Date of manufacture: 2011 CE certified

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Model / description: “MAGNUS 400 FIBER, SHIPPABLE KMAT” (Creo label) Serial: M41243 Manufactured: June 2008 Dsdpfx Aksyxl N Ijijkp Power (platesetter): 200/210/220/230/240V, 16A, 50 Hz (on the label) Laser safety: marked Class 1 laser product (normal for enclosed CTP systems) Max plate size: about 685 × 762 mm (around drum × along drum) Min plate size: about 300 × 228 mm Resolution: up to 3048 dpi Throughput: often listed around ~16 plates/hour (depends heavily on plate type + sensitivity and configuration) Machine size / weight: roughly 135 × 176 × 145 cm, ~750 kg The Magnus 400 Fiber system with Shippable KMAT configuration is a professional industrial imaging solution designed for high-precision production environments. This type of equipment is commonly used in the printing and graphic industry for processing and imaging printing plates with high accuracy and consistent performance. The system is built for reliable operation in industrial facilities where stable production processes and dependable equipment are essential. Machines of this type are widely used by printing houses, packaging manufacturers and companies involved in graphic production workflows. The system includes industrial electronic components such as the Hu.q CSG-86 module, manufactured in July 2006, operating at 200–240 V AC, 50/60 Hz with CE and UL certification. These components are designed for long-term operation in demanding industrial environments and ensure stable system performance. The Magnus 400 Fiber CTP system is suitable for companies that require dependable equipment for plate imaging and preparation within professional printing and industrial production environments. The machine can be inspected on site and prepared for shipment. Loading and international transport can be arranged depending on the buyer’s,

Condition: excellent (used), functionality: fully functional, 10 pcs in stock Manufacturer: Dürkopp Adler Model: 767-FA-373 Machine type: Industrial sewing machine Control system: Efka Variocontrol 820 Table: Kessler industrial sewing table Drive: Industrial motor with pedal control Configuration: Complete sewing workstation Condition: Used – good working condition Applications This machine is suitable for: Dksdpfx Akoyxli Isijp • Leather sewing • Upholstery production • Automotive interiors • Furniture manufacturing • Heavy textile sewing • Industrial sewing workshops

Condition: excellent (used), functionality: fully functional, machine/vehicle number: LU0BJ05950, 20 pcs in Stock Manufacturer: JUKI Model: LU-2210N-6 Country of origin: Japan Machine type: Heavy duty industrial sewing machine Feed system: Walking foot Control system: Efka Variocontrol digital controller Motor: Industrial servo motor Table: Kessler industrial sewing table Configuration: Complete workstation Condition: Used – good working condition Applications Suitable for: Dkjdpfx Akeyxlamjiep • Upholstery manufacturing • Leather goods production • Automotive interior production • Furniture manufacturing • Technical textile sewing • Heavy duty garment production

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3029098, total width: 1,100 mm, total length: 2,500 mm, total height: 2,000 mm, Equipment: type plate available, Manufacturer: PIM Ltd. Country: Bulgaria Machine type: Cheese formation machine Capacity: 600 kg/h Year: 2019 Serial number: 3029.098 Material: Stainless steel Application: Dairy processing / cheese production Dedpfx Akeyxkpgeiskp Applications Suitable for: White cheese production Feta type cheese Dairy processing plants Cheese forming and molding

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 050544, total width: 1,750 mm, total length: 3,350 mm, total height: 2,050 mm, empty load weight: 750 kg, input voltage: 400 V, Equipment: cooling unit, type plate available, Manufacturer: Milkplan Model: MPP-5000 Machine Type: Milk Cooling Tank Capacity: 5224 L Year of Manufacture: 2016 Refrigerant: R404A Construction: Stainless Steel Control System: Digital temperature control Certification: CE Applications Suitable for: Milk cooling Milk storage Dairy farms Milk collection centers Dairy processing plants Dkjdpfjyxa N Aox Akiop

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 7013035, total width: 1,950 mm, total length: 4,000 mm, total height: 2,100 mm, Manufacturer: PIM Ltd., Bulgaria Model: MPP6000 Machine Type: Milk Cooling Tank / Milk Cooling Bath Volume: 6000 L Year of Manufacture: 2019 Serial Number: 7013.035 Material: Stainless Steel Certification: CE Dkodpfjyxa A Nex Akiep Applications Suitable for: Milk cooling Milk storage Dairy processing plants Milk collection centers Food processing facilities

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 700013, Manufacturer: PIM Ltd., Bulgaria Dsdpjyxayuofx Akiokp Machine Type: Milk Homogenizer Serial Number: 7008.013 Capacity: 5000 L/h Year of Manufacture: 2019 Construction: Stainless Steel Application: Milk and dairy product homogenization Certification: CE Marked

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 28 m/min, rapid traverse Y-axis: 28 m/min, rapid traverse Z-axis: 28 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 25 kVA, torque: 105 Nm, controller manufacturer: Fanuc, controller model: Series 0i-MC, workpiece length (max.): 1,100 mm, workpiece width (max.): 600 mm, workpiece weight (max.): 800 kg, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 1,200 mm, table height: 600 mm, overall weight: 7,500 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, coolant supply: 6 bar, spindle motor power: 11,000 W, number of slots in tool magazine: 16, input voltage: 380 V, BT40 spindle Automatic tool changer 16 tools Oil cooling unit, pneumatic system, lubrication unit Heavy structure, approx. 7.8 tons Excellent for precision machining of steel, aluminium and industrial components Dedsyxac Aepfx Akiokp Country of origin: Taiwan

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 132386-100.1, clamping force: 650 kN, clearance between the columns: 420 mm, column diameter: 65 mm, mold height (min.): 200 mm, ejector force: 22 N, ejector stroke: 150 mm, opening stroke: 450 mm, plate length: 630 mm, plate width: 630 mm, installation height: 650 mm, total length: 3,650 mm, total width: 1,350 mm, total height: 1,950 mm, overall weight: 3,100 kg, power: 11 kW (14.96 HP), Manufacturer: Wittmann Battenfeld Model: HM 65/130 Machine type: Injection molding machine Year of construction: 2010 Clamping force: 65 tons Weight: 3000 kg Hydraulic system pressure: 275 bar Largest motor FLA: 20.8 A Control voltage: 24 V Electrical: 400 V / 50 Hz Control system: Unilog B6S Country of origin: Austria Applications Suitable for: Djdoyw Ug Tjpfx Akiskp • plastic parts manufacturing • automotive plastic components • packaging products • electronics plastic housings • technical plastic parts • household plastic products • industrial plastic components