LA Tools & Service

Year of construction: 2006, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, X-axis travel (longitudinal axis) mm 7280 Y-axis travel (transverse axis) mm 525 Z-axis travel (vertical axis) mm 380 A-axis rotation (spindle rotation) mm from 0° to 180° continuous Maximum positioning speed X-axis m/min 80 Maximum positioning speed Y-axis m/min 60 Gjdoyi Umpopfx Aadjtu Maximum positioning speed Z-axis m/min 30 Maximum A-axis positioning speed From 0° to 90° in 1" Electrospindle power kW 7 Electrospindle speed rpm variable up to 20,000 Tool holder taper HSK-40E Tool magazine capacity qty. 8 Number of clamps qty. 8 Automatic clamp positioning Installed power kW 16 Residual-current circuit breaker on main line A 0.3 Weight t 4.8 Operating pressure bar 6 ÷ 8

Year of construction: 2002, condition: excellent (used), functionality: fully functional, machine/vehicle number: 17800200826, elumatec KF 178 The ideal machine for economical door manufacturing Gsdpfxeyi E Dlj Aadotu For routing lock cylinders and round rosettes (safety locks) in profile systems or multi-chamber profiles with large dimensional depths Three copy routing units which operate completely independently Separate control of the horizontal and vertical router heads The workpiece is clamped upwards towards the contact surface of the lock, which eliminates the need for readjustment of the machine for the backset when working with profiles of different heights The “Spindle Lock” feature makes tool changing easy Flexible back-stop system with support rollers and adjustable folding stops Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg Machine is ready for operation. Shipping of the machine possible on demand.

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: C 113995, Technical data: Main spindle motor power 7.5 kW Gjdpeyifaqofx Aadjtu 8-position tool magazine

Condition: excellent (used), Year of construction: 2011, The machine in a very good condition. 7,6 meters long, 2 working places. Possible to give a warranty up to 6 month. Gtedeyia Ezopfx Aadeu

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Gtodoyhzirepfx Aadou Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Godpfx Aaeyhf R Nsdjtu Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Year of construction: 2005, condition: used, CNC Machining Center Elumatec SBZ 122, year of manufacture 2005, designed for machining aluminum profiles for windows, curtain walls, and light metalwork. This is a robust and reliable industrial machine, highly regarded for its machining precision and operational continuity. Main features: Gtjdpfeyg Ht Asx Aadju - 3-axis CNC machining center - High-rigidity steel frame - Vertical spindle for milling, drilling, and complex operations - Worktable with pneumatic vices for stable and precise clamping - Long-travel longitudinal axis, ideal for processing profiles of considerable length - Protective enclosure with chip conveyor - Elumatec CNC control unit - Ideal for medium to high production and repetitive operations Applications: - Milling - Drilling - Slotting - End and face machining - Production of aluminum frames and special profiles Key data: - Manufacturer: Elumatec - Model: SBZ 122 - Year of manufacture: 2005 - Condition: Used Condition: - Machine in good overall condition - Coming from an industrial environment - Can be seen in operation by appointment Included equipment: - Complete workbench - Pneumatic clamping system - Control panel - Original covers and safety guards

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 6,450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 6,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS X-axis travel: 6,450 mm Y-axis travel: 400 mm Z-axis travel: 380 mm Machining length: 6,500 mm Number of tools: 8 pcs. Tool holder: BT30 Tool change time: 1.2 s Maximum tool diameter: 80 mm Gtsdpfxsyg D A Ie Aadou Spindle speed: 6,000 rpm Feed rate X: 34 m/min Feed rate Y+Z: 18 m/min MACHINE DETAILS Total power requirement: 8.5 kW Dimensions & Weight Dimensions: 9,800 x 3,000 x 2,400/3,300 mm Weight: 5,400 kg

Year of construction: 2008, condition: used, functionality: fully functional, Three-axis interpolated CNC machining center with angular head accessory (enabling 4-axis machining), model Phantomatic T3 A. Specifically designed for comprehensive processing of aluminum, PVC, and light alloy profiles. Renowned for its historical reliability, precision, and sturdiness, this machine is ideally suited for window and door fabrication workshops as well as light metal carpentry applications. Structure and Configuration Gsdjygumdepfx Aadstu • Monoblock, fully enclosed frame with extensive perimeter protections • Completely enclosed working area with safety panels • Extended worktable with multiple pneumatic clamps for secure profile holding • Heavy-duty linear guides and kinematics, engineered for continuous operation • Prepared for machining of longer profiles Machining Unit • High-performance vertical spindle suitable for: o Milling o Drilling o Tapping o Slotting and contoured machining • Tool holding stations in view, including: o Milling head attachments o Drilling tools o Saw blade group (as shown in photos) • Manual tool change with current tool set included Controls and Commands • Emmegi operator console featuring: o Integrated monitor o Physical control keypad o Safety selectors o Emergency stop button • Ergonomic operator station with work surface • User-friendly, proven control system—suitable even for less experienced operators Included Equipment (as pictured) • Tool and toolholder set • Accessory case with: o Service wrenches o Clamping devices o Support equipment • Full set of guards and safety covers • Integrated electrical system on board the machine Applications • Aluminum and PVC windows and doors • Lightweight façades • Industrial profiles • Light metal fabrication • Precision machining of extruded profiles Machine Condition • Used machine • Overall condition: good • Source: production workshop • Dismantled / ready for loading (see photos) • Normal wear consistent with age

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: G123379, Machining center, fully functional, well-maintained, ready for immediate collection. Gjdpfx Aoygh Eteadotu

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Type: AKF 250 Motor: 400V 2.2kW Speed: 2800 rpm Cutter diameter: 250 mm Cutter arbor diameter: 40 mm Gedjygdf Aepfx Aadstu Milling width: 300 mm Milling depth: 85 mm Profile height: 160 mm Weight: approx. 150 kg Dimensions (W x H x D): 950 x 1450 x 930 mm

Condition: like new (used), Year of construction: 2023, operating hours: 2,878 h, functionality: fully functional, We are offering this MECAL MC 304 Ariel – 5 MDT in almost new condition, year of construction 2023. Manufacturer: MECAL Model: MC 304 Ariel – 5 MDT Year of manufacture: 2023 The Mecal MC 304 Ariel-5 is a state-of-the-art 5-axis CNC machining center, perfectly suited for companies in the metalworking and construction industries. It is designed for high-speed machining of various materials such as brass, steel, aluminum, and PVC. Technical specifications Gtodpfxoyft Iqj Aadju Weight (kg): 6500 RPM: 20000 Width (mm): 2500 Height (mm): 2650 Length (mm): 11800 X-axis travel (mm): 9500 Y-axis travel (mm): 1400 Z-axis travel (mm): 700 C-axis travel (mm): 22 A-axis rotation (deg): 120 Tool magazine: 12 Motor power (kW): 11 Max. blade diameter: 400 Cooling type: Coolant fluid Spindle interface type: HSK-F63 If you have any questions or would like more information, please feel free to send us a message or call us.

Year of construction: 2024, condition: as good as new (ex-display), XX100329 FMC 120 - CNC machining centre 1x PR204851 5-position automatic tool magazine (ISO 30) 1x PR-28965 Rotation of the work table to intermediate angles with manual stop 1x ZP714617 Custom 2D milling module FST CAM 4 1x PR-27602 TOOL SET ALUMINIUM TYPE 1 1x PR207680 4 motorized clamps – 2 pneumatic stops Gtsdpsyfg Uwofx Aadou

Year of construction: 2013, condition: used, 3-Axis CNC Machining Center Elumatec SBZ 608, ideal for automated processing of aluminum and PVC profiles for windows, doors, and façades. The machine is engineered to perform precise and repeatable milling, drilling, tapping, and hardware slotting operations. The machine is robust, reliable, and suitable for medium to high production volumes, already equipped with integrated loading/unloading systems and roller conveyors. Main Features - 3-axis interpolated CNC machining center - Complete profile machining: milling, drilling, tapping, and slotting - Heavy-duty industrial frame for maximum stability - Worktable with pneumatic clamping systems Gedpfx Asydly Aoadotu - Automatic profile positioning system - Infeed and outfeed conveyors - Safety enclosure with protective devices - Elumatec CNC control - Integrated pneumatic system Key Technical Data - Power supply: 3/N/PE – 400 V - Frequency: 50 Hz - Installed power: 15 kW - Rated current: 21 A - Year: 10/2013 - Manufacturer: Elumatec GmbH – Germany Condition - Operative and in good working order - Regularly used in a production environment - Routine maintenance performed - Available for inspection by appointment Supply includes - Elumatec SBZ 608 machining center - Infeed and outfeed roller conveyors - Safety enclosure - Electrical cabinet and CNC unit - Technical documentation (if available) Applications - Aluminum window and door profiles - PVC window and door profiles - Curtain walls - Industrial profiles

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS X-axis travel: 9,500 mm Y-axis travel: 1,000 mm Z-axis travel: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum milling cutter diameter: 100 mm Maximum disc milling cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with misting EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, notching, and sawing with stationary profile bar 6-sided machining: front optional, underside possible Profile protection: machining with stationary profile bar Robust, low-wear direct drives on all axes Axes: 5-axis CNC control for complex 3D machining Display: 15-inch colour monitor Interfaces: USB ports, network connection 2-layer machining for pendulum operation Associated tooling (HSK tool holders) Gtjdpfsycul Sex Aadsu Two circular saws for aluminium Note: Documentation for disassembly of the machine is included.

Year of construction: 2017, condition: like new (used), functionality: fully functional, Single-spindle copy milling machine with manual operation and pneumatic locking. Head milling movement via indirect lever. Enables continuous machining without rotating the workpiece and processing of steel up to 2 mm. Scratch-resistant worktable. Manual tracer stylus. Deflection Lever for Head Movement: Manual movement of the tool in the horizontal plane is implemented via a lever to reduce operator effort. The handle height is adjustable for practical and ergonomic usage. Control Joystick: The lever enables vertical travel of the milling unit. The hand lever integrates the motor start button. The milling spindle is equipped with a tool holder featuring an ISO 30 quick-release coupling; four storage slots for tool holders are located on the side of the machine. Stops and Roller Conveyors: Roller conveyors on both right and left sides facilitate the machining of very long profiles. A system of hand-adjustable stops, also fitted on both sides, ensures correct positioning of the workpiece in the machine and brings it into the working area. Stylus with 4 Diameters: Gjdeycgvijpfx Aadetu The mechanical tracer has four selectable positions, each corresponding to a different tool diameter. It is set onto the pre-chosen template, guaranteeing precise and safe machining. Clamping Devices: The machine is equipped with manually adjustable horizontal pneumatic clamps that ensure secure and correct fixation of the profile on the machine.

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Gtedpox U Thkjfx Aadju Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Year of construction: 2018, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,500 mm Gtsdpfx Aaex Up Uajdeu Travel path Y-axis: 1100 mm Travel stroke of Z-axis: 655 mm Swivel angle B-axis: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm. Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) minimum quantity spraying Clamp detection and automatic shifting 12 pneumatic material clamps Barcode scanner and label printer Swarf Conveyor made of metal Angle head for machining from below Extraction for cabin Pendulum operation through two light barrier areas Manual control console Spindle hours: about 7500 The loading is included in the price, machine is already dismantled Weight: approx. 14,000 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 6,142 h, functionality: fully functional, machine/vehicle number: C114859, feed length X-axis: 6,000 mm, feed length Y-axis: 525 mm, feed length Z-axis: 335 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 420 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, spindle speed (max.): 24,000 rpm, mount diameter: 180 mm, overall weight: 2,900 kg, input current: 32 A, Very neat machine including extraction at the top. The machine can process 3 sides and features an HSK-63 chuck. Tool holder for 8 tools. Oil mist lubrication. Windows XP. Godpex Tr E Ssfx Aadjtu

Year of construction: 2008, condition: excellent (used), functionality: fully functional, ❇️ elumatec SBZ 122 / 30 – CNC Machining Center for Aluminium Profiles Excellent Condition | Fully Functional | Well-Maintained Industrial Machine ⸻ Gtedpfsx Tfi Rex Aadeu For sale is a high-quality elumatec SBZ 122/30 CNC machining center from a window and façade construction company. The machine is in excellent, well-maintained, and fully operational condition and was in productive use until recently. Ideally suited for efficient machining of aluminium, light metal, and thin-walled steel profiles in professional window, door, and façade manufacturing. The machine was ordered at the end of 2007, with delivery and commissioning in May 2008. Throughout its operating period, it has been operated solely by a dedicated, highly meticulous employee, including all necessary work preparation. Inspection and function testing on site are possible by arrangement at any time. ⸻ ❇️ Machine • Manufacturer: elumatec • Model: SBZ 122 • Machine Type: CNC Profile Machining Center • Application Area: Window, Door & Façade Construction • Control: elumatec CNC control system with operator panel & keyboard • Axes: CNC-controlled multi-axis machining • Machining Operations: • Drilling • Milling • Tapping • Notching / Profile processing ⸻ ❇️ Features & Highlights • CNC machining unit with automatic tool changer • Integrated roller conveyor / material support • Multi-beam safety light curtain SICK M4000 • Pneumatic clamping system • Cooling & lubrication unit • Operator panel with monitor & keyboard • Foot switch • Heavy-duty industrial design – durable & precise • Ideal for both series and custom part production ❇️ Working Area / Travel Paths • X-axis (longitudinal travel): approx. 3,850 mm → max. machining length approx. 3,750 mm (without end machining) → approx. 3,650 mm (with end machining) • Y-axis: approx. 350 mm • Z-axis: approx. 280 mm The stated values correspond to the standard technical specifications of the elumatec SBZ 122/30 model and are designed for machining common aluminium profiles in window, door, and façade construction. ⸻ ❇️ Condition & History • Very well-maintained overall condition • Technically fully functional • Maintenance and any necessary repairs performed by Vincon (elumatec’s service and sales partner) • Use of original spare parts • Very low reject rate due to meticulous work preparation and operation • Low tool wear • No known technical defects ⸻ ❇️ Documentation & Accessories • Operating manual for SBZ 121/122 software (2 copies) • Operating manual SBZ 122/20+30 • Tool list including recommended cutting data • CD-ROM for multi-beam safety light curtain SICK M4000 • Copy of the original invoice from 2008, listing the scope of delivery at the time ⸻ ❇️ Technical Data • External dimensions (L × W × H): approx. 7,000 × 2,200 × 2,600 mm (Reference value, exact measurements upon inspection) • Weight: approx. 4,500 kg (estimated) ⸻ ❇️ Price €19,900 net plus 19% VAT ⸻ ❇️ Terms & Conditions • Sale on behalf of customer • Invoice with VAT shown separately • Location: 72229 Rohrdorf • Loading possible on site by overhead crane ⸻ ❇️ Inspection & Inquiries Feel free to contact us by phone or message – inspection is expressly recommended.

Year of construction: 2008, condition: good (used), 4-axis workingcenter Gsdpox Syx Dsfx Aadjtu

Condition: used, functionality: fully functional, P Macchine 03P – Industrial Machine (Year 2002) Manufacturer: P Macchine s.r.l. Model: 03P Year of manufacture: 2002 Serial number: 03P0100071 Location: Finland Country of origin: Italy CE marked: Yes Description P Macchine 03P is a robust Italian-made industrial machine designed for professional use. The machine is CE certified and suitable for continuous production. Its solid construction and straightforward technology ensure reliable operation and easy maintenance. Technical specifications Voltage: 220–240 V Phase: 1~ (single-phase) Frequency: 50–60 Hz Power: 0.75 kW × 3 Current: 7 A Spindle speed: 12,000 rpm Operating air pressure: 6–7 bar Air consumption: 2 Nl/s Weight: 290 kg Additional information Test run possible by appointment Buyer is responsible for loading, transport, customs and all related costs All details to be verified with the seller prior to purchase 📩 Contact us for price, additional photos and further information Gsdpfjx Rvmuox Aadjtu

Year of construction: 1992, operating hours: 100 h, condition: used, functionality: fully functional, Description Corner crimper for pressing profiles with a height of up to 68 mm. Extremely high pressing force achieved by a large-volume bellows cylinder (maintenance-free). The machine is easy to adjust and operate. Counter bearing pneumatically positionable with mechanical locking Support arms and pressing blades included as standard Two-hand operation for safe use Options Additional support Special pressing blade Technical Data Pressing height: 68 mm Pressing force: 40 kN (4 t) Drive: Pneumatic Compressed air supply: 7 bar Gedpfxex Rvl Rj Aadetu Air consumption per cycle: 30 l Dimensions (L × D × H): 650 × 820 × 1,270 mm Weight: 205 kg

Condition: good (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: 8138, type of input current: three-phase, input voltage: 400 V, ❇️ Pressta Eisele AKF – Notching Machine | Excellent Condition | Fully Functional | UVV Safety Inspected For sale is a robust Pressta Eisele AKF notching machine, designed for metal and window fabrication applications. The machine is in overall excellent, well-maintained, and fully operational condition, and was in use until recently. A valid UVV/safety inspection is available (see tag/photos). ⚠️ Important Note: The pneumatic hoses on this machine show age-related material fatigue. ➡️ Recommendation: Replace the pneumatic hoses before commissioning (a manageable effort). On-site inspection and functionality testing welcome by appointment. ⸻ ❇️ Machine Details • Manufacturer: Pressta Eisele • Model: AKF • Serial No.: 8138 • Year of Manufacture: 1989 • Made in W.-Germany • Application: Notching of profiles in metal and window fabrication ⸻ ❇️ Features & Equipment • Heavy, low-vibration machine body • Powerful main motor • Pneumatic feed and clamping functions • Sturdy worktable with clamping options • Safety guards included • Pedal operating control • Service-friendly design ⸻ ❇️ Condition • Mechanics and electrics: fully functional • Well-maintained overall condition • Note: Pneumatic hoses require replacement due to age (see above) ⸻ ❇️ Dimensions • External dimensions (approx.): H 137 cm × W 99 cm × D 97 cm ⸻ Gtodpfjx Rpfqsx Aadeu ❇️ Terms & Conditions • Sale on behalf of customer • Invoice with shown VAT available • Location: 72229 Rohrdorf, Germany • Loading by overhead crane on-site possible • Delivery available by arrangement; costs to be covered by buyer ⸻ ❇️ Price • Net price: €1,490 negotiable, plus VAT ⸻ If interested, please get in touch – viewing and trial run possible upon arrangement. ⸻ ⚠️ See my other listings for additional machines and accessories for window, metal, and workshop operations. ‼️ Be sure to check my other offers – it’s worth a look!

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 22 002, type of input current: three-phase, input voltage: 400 V, ❇️ elumatec AF 222 – Notching and End Milling Machine for Aluminium | Excellent Condition | Fully Functional For sale is a high-quality elumatec AF 222 notching and end milling machine from a window and metalworking business. The machine is in excellent, well-maintained, and fully operational condition and was in regular use up to the present time. Inspection and function testing on site are possible at any time. ⸻ ❇️ Technical Data • Manufacturer: elumatec (Eugen Lutz GmbH & Co. KG), Germany • Model: AF 222 • Machine type: Notching / End Milling Machine • Year of manufacture: 07/1997 • Power supply: 230 / 400 V, three-phase • Frequency: 50 Hz • Spindle speed: approx. 2,800 rpm • Pneumatic connection: 5–8 bar • Application range: Aluminium and plastic profiles • Applications: Mullion, door and profile notching • Design: heavy-duty, long-life industrial version ⸻ ❇️ Features & Highlights • Heavy, low-vibration industrial machine • Precision milling unit for notching and end milling operations Godpsx Rpfkefx Aadstu • Pneumatic material clamping / hold-down devices • Large worktable with scale and stops • Adjustable profile supports • Extraction port with protective brushes • Safe, ergonomic operation • Ideal for window, door, and façade construction • Ready for immediate use ⸻ ❇️ Condition • Very good, well-maintained condition • Fully functional • Clean mechanics, smooth running • No known technical defects • Machine was in use until recently ⸻ ❇️ Sale & Processing • Sale on behalf of a client • Invoice with VAT can be issued • Delivery possible by arrangement and at cost • Location: 72229 Rohrdorf • Loading facilities available on site via overhead crane ⸻ ❇️ Price ➡️ Offer price (net): €2,200 plus VAT ⸻ ❇️ External dimensions (approx.) • W 120 cm × D 90 cm × H 160 cm ⸻ ⚠️ In my other listings, I offer additional machines and accessories for window manufacturing, metalworking, and workshop operations. ‼️ Please take a look at my other offers as well – it’s worth your while!