HQW GmbH

Condition: used, Extraction system, central extraction system, room air filter system Gedpfx Ado Akd Hfe Rsui Central welding fume extraction, room air extraction, oil mist extraction WERRA fans - ETS Efficient Technical Solutions GmbH Type MAE Manufacturer's No. 567924, Year of manufacture 2009 Volume flow rate 9600 m³/h Fan speed 2915 rpm Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Wiring from the cabinet to the fan must be carried out on site - Pre-filter stage 1 = 3 pieces of wire mesh pre-filter 500 x 500 mm - Pre-filter stage 2 = 3 pieces of wire mesh pre-filter 500 x 500 mm - Main filter 4 pieces of bag filter 592 x 592 x 600 mm - Fine filter = 4 pieces of filter cartridge 592 x 592 x 292 mm - Maintenance flap for filter replacement - Radial fan at the top of the system - Ball valve as an oil drain valve in the lower area of the filter housing - Electrical wiring diagram available Filter housing L x W x H 181 x 160 x 295 cm Space requirement L x W x H 200 x 165 x 365 cm Overall height with fan 301 cm Transport height without fan 301 cm Weight approx. 1600 kg Very good condition

Condition: good (used), Year of construction: 2012, functionality: fully functional, input voltage: 400 V, volume flow: 7,000 m³/h, compressed air connection: 5 bar, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, input current: 12 A, Fully functional Kemper System 8000 dust extraction system with a flow rate of 7,000 m³/h. Gujdpfxs Akdm Us Ad Rei

Condition: good (used), Year of construction: 2010, machine/vehicle number: 6907210011627, Offer 26325 Gsdpfx Ae Ai T E Sod Rjui Technical data: - Mobile extraction system with articulated extraction arm - Suitable for the extraction of welding fumes during welding of - Steel + stainless steel + aluminum + unalloyed or galvanized steels - Welding fume class W3 - Articulated extraction arm 360° 4000 mm - Max. fan flow rate approx. 1600 m³/h - Max. static pressure 1800 Pa - Particle separator: coarse filter, pre-filter - Main particle separator: main filter - Gas separator: activated carbon filter - Drive - Fan 220 V / 1.10 kW - Space requirement approx. B 600 x H 900 / 2450 x D 600 mm - Weight approx. 80 kg - Recorded operating hours 85 h

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 84 m², suction capacity: 9,700 m³/h, negative pressure: 3,800 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: ESTA Model: DUSTEX F-84 The filter is cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Parameters: Max. capacity – 9700 m3/h Max. vacuum – 3800 Pa Filtration area 84 m2 Cartridge filter inserts – 4 pcs. Motor power 7.5 Kw. Inlet diameter – 350 mm Device dimensions: Height – 3.38 m Godpfxe Ai S Ske Ad Rjui Width – 1.38 m x 1.34 m Base – 1.05 m x 1.05 m Stock number: 0031

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 126 m², suction capacity: 10,300 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, negative pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: ESTA Model: DUSTEX F-126 The filter is cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, which minimizes the risk of explosion. Parameters: Gedpfj Aignwsx Ad Rjui Maximum capacity - 10300 m3/h Filtration area - 126 m2 Cartridge filter inserts - 6 pcs. Motor power - 11 kW Inlet diameter - 2 x 300 mm Device dimensions: Height - 3.90 m Width - 2.12 m x 1.35 m Base - 1.47 m x 1.03 m Stock number: 0030

Condition: used, Year of construction: 2023, TEKA welding fume extraction system Model VACCUBE 30 Guedpfe Ah Drvex Ad Rei used Year of manufacture: 2023 Power: 3.0 kW Current consumption: 7.2 A Connection voltage: 400 V / 50 Hz Max. capacity: 320 m³/h Max. pressure: 27000 PA Filter area: 8.16 m² PTFE Sound level: 68 d(B)A Weight: 125 kg

Condition: good (used), Year of construction: 2016, Welding fume extraction system F-84, manufactured in 2016, for sale! A welding fume extraction system, type F-84, manufactured in 2016, is for sale. The system is sold with a comprehensive range of accessories. Included in the scope of delivery: * Various exhaust pipes * Several extraction arms * Other accessories Gsdj Ahq E Iepfx Ad Rjui The system is ideally suited for use in workshops and industrial facilities. If you are interested or have any questions, please do not hesitate to contact us!

Condition: good (used), Year of construction: 2020, functionality: fully functional, Equipment: type plate available, We are offering this excellent TEKA Caremaster welding fume extraction system for sale. Gsdpfx Ae Agcwwed Rsui Manufacturer: TEKA Model: Caremaster Machine type: Welding fume extraction system Without filters!!! Two units available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2006, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Lincoln Electric, mobile welding fume extraction system type Mobiflex 200-M Godpj Adzcpjfx Ad Rsui -Drive: 0.75 kW -Extraction arm: Ø 205 mm x 3930 mm -Transport dimensions: 1520/830/H2510 mm -Weight: 109 kg

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Godpjz Trrhefx Ad Rjui Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029

Condition: used, Year of construction: 2023, Manufacturer: TEKA, Type: ZPF 9H, Year of manufacture: 2023, Serial no. A22341310061001, 22 kW, Exhaust/piping system, Dust collection container, Welding fume class W3 +++ Subject to prior sale! +++ +++ Attention: This unit is part of an online auction! +++ Godpfx Adsz Tn Edj Rsui

Condition: good (used), Year of construction: 2019, functionality: fully functional, volume flow: 8.64 m³/h, filter area: 120 m², suction capacity: 12,000 m³/h, Equipment: type plate available, Extraction capacity: 6,000–8,640 m³/h Max. fan capacity: 12,000 m³/h Total filter surface: 120 m² Number of filter elements: 12 Operating hours: 2.045 Featured with: - Central welding fume extraction and filtration system - Filter material ePTFE membrane - Automatic compressed-air filter cleaning - W3 Welding fume class - Touchscreen control - Additional extraction point Country of origin: Germany Motor power: 7.5 kW Machine (L×W×H): 370 × 190 × 280 cm Gedoz Tdfyjpfx Ad Roui Machine weight: 1.220 kg

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, power: 2.2 kW (2.99 HP), input current: 5 A, Equipment: type plate available, TEKA welding fume extraction system 3 units with control units, pipes, and mounting hardware The system is new, has never been used, and is partially still in its original packaging! Guedpfx Adsz Sp Ahe Rsi

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Guedpfjz Smqksx Ad Rei Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 64 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Nederman dust extraction unit, fume extraction system, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, and catalysts, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Fan power: 5.5 kW Godpfx Asz R T Elod Rsui Capacity: up to 5000 m3/h Vacuum: up to 3000 Pa Cartridge filter elements: 16 pcs Filtration area: 64 m2 Inlet diameter: 315 mm Dimensions: Length: 1.60 m Width: 1.65 m Height: 3.40 m Base: 1.32 m x 1.12 m Stock number: 1174

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Gjdpfx Adsz N Am Ue Rsui Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Fan model: ART 632/N4 Capacity: 16,000 m3/h Noise silencer included. Gedpfx Adoz Nx S Tj Reui We also offer new filter inserts on request, tailored to the intended use of the equipment. Stock number: 0018

Condition: used, Welding Fumes Extractor CAPTAIR Gjdpfx Asz I Dgljd Rjui Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Width: 600 mm Depth: 500 mm Total height: 1300 mm

Condition: used, Year of construction: 2008, functionality: fully functional, input voltage: 400 V, volume flow: 3,600 m³/h, power: 5.5 kW (7.48 HP), Equipment: type plate available, Industrial filtration and dust collection system designed by Sideros Engineering for treating fumes and dust generated during thermal cutting, welding, or grinding processes. Gedpfxsz Hk N Ds Ad Roui Collection and filtration of fumes from oxy-fuel cutting, plasma cutting, and laser cutting, as well as dust from welding and sanding.

Condition: used, Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, filter area: 286 m², suction capacity: 7,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit, self-cleaning filter, pneumatic, vacuum-operated for continuous operation, from the renowned Donaldson Torit brand. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and for all types of dry dust. The fan is located behind the filter on the clean air side, minimizing the risk of explosion. The filter cartridges are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Fan power: 9 kW Flow rate: 7000 m3/h Inlet diameter: 350 mm Number of filter cartridges: 12 Filtration area: 286.8 m2 Year of manufacture: 1999 Dimensions: Width: 2.10 m Depth: 2.50 m Height: 3.37 m Guodsz Hkgijpfx Ad Rsi Base: 2.11 m x 1.52 m Stock number: 1171

Condition: ready for operation (used), Year of construction: 1999, Suction capacity: 1000 m³/h Maximum static pressure: 2700 Pa Electrical connection: 400 V, 1.5 kW Gedpfsz Eq Ukjx Ad Roui Space requirement: 855 x 655 x 1475 mm Weight: 200 kg

Condition: ready for operation (used), Year of construction: 1999, Suction capacity: 1000 m³/h Maximum static pressure: 2700 Pa Electrical connection: 400 V, 1.5 kW Guodpfx Asz Eq T Tjd Roi Space requirement: 855 x 655 x 1475 mm Weight: 200 kg

Condition: ready for operation (used), Year of construction: 1992, Suction capacity: 1200 m³/h Guedpfxoz Eq Tte Ad Rsi Maximum static pressure: 1350 Pa Electrical connection: 380 V, 0.75 kW Space requirement: 700 x 660 x 1030 mm Weight:

Condition: good (used), Year of construction: 2016, functionality: fully functional, Includes 1 arm. Guodpoz Dv Dnofx Ad Rji

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Guedpfxsz Ayv Uj Ad Roi Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155