Welding smoke suction

TEKA CartMaster IFA

Condition: good (used), Year of construction: 2018, Flame-cutting and drilling system Plate processing center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool turret Tool holder capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point cross conveyor Number of carriages: 2 with clamping jaws NC feed carriage, positioned to the side 4 clamping jaws (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Discharge side: Discharge roller conveyor with a lowerable discharge table and chute into a material collection container for discharging small parts. Filter unit including piping Powerful for use with carbide tools. For drilling, threading, marking, milling, and plasma cutting of flat steel and sheets. Software options for milling and scoring LANTEK license Dcedpfxsvzrczj Apmsp 31126ä Availability: immediately!

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Dcsdewc A Rdjpfx Apmjp

Condition: used, Year of construction: 2009, machine/vehicle number: 0102-250002, The Behringer HBP310-523GA double mitre bandsaw is a high-quality, robust machine that has been specially designed for professional use in metalworking. It offers an excellent combination of performance, precision and versatility, making it suitable for a wide range of applications in the industry. The HBP310-523GA is sold including roller conveyor in the infeed and outfeed side, feed gripper system and cross feed system in the outfeed area. The machine is in very good condition. Working areas of the HBP310-523GA saw Mitre left 75° round 310 mm, flat W x H = 520 x 310 mm 60° round 310 mm, flat W x H = 450 x 310 mm 45° round 310 mm, flat W x H = 350 x 310 mm 30° round 230 mm, flat W x H = 230 x 310 mm Mitre right Dcedpfoyh Ixasx Apmop 75° round 310 mm, flat W x H = 500 x 310 mm 60° round 310 mm, flat W x H = 420 x 310 mm 45° round 270 mm, flat W x H = 270 x 310 mm Minimum round: 20 mm Maximum material length: 10 m

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 320 h, functionality: fully functional, machine/vehicle number: Serien Nr.000025, arm reach: 1,850 mm, feed length X-axis: 3,000 mm, total width: 1,200 mm, total length: 3,000 mm, type of cooling: water, working width: 2,100 mm, working length: 6,000 mm, KUKA KR30 robot cell with linear axis and positioner – partial sale possible Package 1 KUKA KR30 robot 3m linear axis / longitudinal carriage KUKA DKP400 positioner Price: EUR 58,000 (negotiable) Package 2 Meltio Engine metal printing / laser cladding system Price: EUR 68,000 (negotiable) For sale is a high-quality KUKA robotics cell for industrial applications in the following areas: Automation Robotic welding Special machine construction Additive manufacturing / laser cladding Components of the system KUKA KR30 robot 3m linear axis / longitudinal carriage KUKA DKP400 positioner Control system and accessories Optional with Meltio Engine system Flexible sales options The system can be sold: as a complete system or modularly / individually. Possible configurations: KUKA KR30 incl. linear axis Dcsdpfxoyk D T Uo Apmep Positioner sold separately Complete robot cell Optional with Meltio Engine Technical highlights Industrial quality from KUKA Stable DKP400 positioner 3m longitudinal carriage Versatile integration Ideal for automation and welding applications The system is ideally suited for: Robotic welding Automation solutions Research and development projects Training and educational purposes Further information, technical data, and on-site inspections are available upon request. Partial sale possible. Support for transport, commissioning, or integration can be provided upon agreement.

Condition: like new (used), Year of construction: 2024, Saw blade solid carbide / HSS: max. 425 mm Drive power: - Two-stage with chain: 1.7/2.6 kW, - Two-stage with belt pulley: 3.7/4.5 kW Cutting speed saw blade (400 mm): - two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min - two-stage with belt pulley: 20/40 m/min, 30/60 m/min Infinitely variable saw speed control fully electronic Working range square 90° max.:120 x 120 mm 45° max: Working range flat: 90° max.:230 x 80 mm 45° max: Working range round: 90° max.: 140 mm 45° max: Feed length single stroke: 5-1000 mm Multiple stroke: 5-9999 mm Feed speed AC servo max: 500 mm/s Weight(saw)approx.:3100 kg Dimensions LxWxH( saw)approx.:2500mm x 1300mm x 2100mm Footprint LxW: 2500mm x 1300mm Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and problem-free operation of the system. Due to the design of the sawing system, it is possible to realize a very precise length tolerance. The machine is generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - Maintenance or replacement of all hydraulic cylinders and valve terminals - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body Dodpfeuiy R Rex Apmecp The machine also features - Fully automatic feed - Fully automatic miter adjustment +/- 60° Warranty: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Sink scraper - Extended feed unit 2000mm - Chain magazine for 6m of material - Removal gripper system for sorting the cut-off pieces - Removal gripper system for sorting the cut-off pieces and realizing a multiple recut at the end of the workpiece - Delivery and installation on your premises - Training of your employees

Condition: ready for operation (used), Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Dsdpsv Hgkqofx Apmjcp

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Kaltenbach KBS 400 NA metal bandsaw, automatic (2020) Manufacturer: Kaltenbach Type: KBS 400 NA Year of manufacture: 2020 Condition: used, very good, operational Bandsaw blade (mm): 5,730 x 41 x 1.3 mm Motor power (kW): 4 Cutting speed (mm/min): 15-90 Dcjdpfozww Ausx Apmop Bandsaw blade feed rate (m/min): 0-300 Swivel range: 115° Round stock 90°: 350 mm Round stock 45°: 350 mm Square stock 90°: 400x350 mm Square stock 45°: 315x350 mm Working height: 720 mm Weight: 3600 kg CNC-controlled cutting angle adjustment Separately driven chip brush Automatic material feed gripper with a stroke length of 2,600 mm for single stroke Hydraulic blade tensioning Electronic bandsaw blade slippage monitoring

Year of construction: 2026, condition: new, ProfiStop Omicron is a heavy-duty solution for high-productivity cutting of heavy steel or timber. Run your heavy-materials production with precision and accuracy of a Swiss watch. • Fully automated servo motor cut lengths measuring • Simple to use high-accuracy heavy materials cutting • Heavy duty 120+ kg recommended material weight • Ideal for hardwood timber and structural steel • Automated and streamlined jobs management • Label printing and bar-code / QR jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 2 m, 4 m, 6 m, 8 m, 10 m, 12 m, 14 m. Highly suitable for: • Structural steel processing • Steel frames fabrication • Agricultural manufacture • Steel tube bending • Retail steel sales Can be used with all your existing saws including: • Band saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Omicron Length: 8 m Stroke: 7560 mm Pushing capacity: 120-400 kg Software: Basic Dodof Dqnyopfx Apmscp Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, System consisting of: 1 Welding robot Qirox QRC 350-E including control unit, programming handheld device, 24 V buffer, PC connection on the control cabinet side, 2 GB flash drive from a training system, in like-new condition, manufactured in 2023. Gas nozzle sensor, arc welding seam tracking, multi-layer welding technique, point editor, oscillating patterns, transformation. Qineo Puls 600 with Premium control module, wire feeder, torch hose package, welding torch MRW 510 evo, torch testing gauge, mechanical cleaning, pressure booster. Like-new floor track with a capacity of 20 kN, travel distance 12 m, robot is mounted on a C-shaped stand in a hanging position, manufactured in 2019, 135 operating hours. 2 Rotary positioning device with counter bearing TC 5 kN (no operating hours), load capacity 1000 kg, clamping length 5.0 m. Dsdpfxjzu Shyj Apmjcp Connection control, 4 light barriers, 2 start pre-selection. Delivery date: upon agreement. The components are in stock and need to be assembled and tested. Warranty: 6 months.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, working range: 6,800 mm, total length: 7,000 mm, repeat accuracy: 0.03 mm, power of the servo motor: 2 W, HPM Autopos saw feed system 7000 – positioning/feed system with Imet BS 400 – NEW For sale: HPM Autopos 7000, a robust servo-controlled feed and positioning system for the automatic positioning of tubes, profiles, and other materials. This system is an enhanced version of the previous MKH system. Technical specifications: Dcedpfoz Syxysx Apmjp * Brand: Imet BS 400 * Brand: HPM Mechanical Automation * Type: Autopos 7000 * Condition: New / Demo * Length: 7,000 mm * Servo-controlled drive with rack and pinion * Siemens control system * 12.1-inch touchscreen Panel-PC * VPN modem for remote support * Robust, foldable material clamp * Steel frame with drip trays * Pull cord emergency stop * 200 kg load capacity per roller High accuracy After installation, the machine is measured with a Renishaw XL80, and any mechanical deviations are corrected by means of a compensation table in the software. This allows us to achieve a repeatability accuracy of up to +/- 0.03 mm. A measurement report is included. Applications: Suitable for, among other things, circular saws, band saws, pillar drills, and automated sawing and drilling lines. The HPM Autopos can be integrated with both new and existing sawing and drilling machines. In this process, we can link the control and functions of the existing machine to our own HPM system. We also offer customized solutions for the overhaul, retrofitting, and expansion of existing machine installations. Everything is developed and realized in-house. Price on request. Please do not hesitate to contact us for a no-obligation consultation. We would be happy to discuss a suitable solution with you.