fwb-Maschinenhandel GmbH

Condition: good (used), Weinig planing head Bore – 50 Dksdpfez N A Thsx Al Seu

Condition: like new (used), Year of construction: 2021, number of spindles: 5, Technical Specifications Four-sided planer KUPER SWT XL-5 Manufacturer: KUPER – Heinrich KUPER GmbH, Germany Djdpfoz N Apijx Al Sjku Model: SWT XL-5 Year of manufacture: 2021 Supply voltage: 400 V Frequency: 50 Hz Power supply: three-phase Rated current: 63.1 A Electrical diagram number: K810-03146 Intended use: planing and profiling of solid wood components, including boards, strips, and other profiled elements. Technical condition: like new, requires minor refurbishment. It has only produced approximately 100 m3 of paneling profiles. I also have a cutting/end-trimming machine listed in another offer.

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planing width: 230 mm, overall weight: 3,000 kg, number of spindles: 5, Planing and Moulding Machine / Four-Sided Planer Manufacturer: SCM Model: Superset XL Year of manufacture: 2003 Planing machine with 5 spindles (bottom-right-left-top-universal), previously used in a parquet production facility. Dkodpfx Alez N Amze Sju Working width: 230 mm Working height: 120 mm Feed speed steplessly adjustable, approx. 5 - 25 m/min. Spindle arrangement: Bottom Right Left Top Universal spindle Weight approx. 3000 kg

Condition: like new (used), SCM ‘Profiset 60 EP’ four-sided planer, in as-new (second-hand) condition, for professional use in woodworking. The machine was only switched on once for a test run and has never been used since. Technical data: - Spindle 1: Bottom / 4 kW / 40 mm - Spindle 2: Right / 5.5 kW / 40 mm - Spindle 3: Left / shared motor with #2 / 40 mm - Spindle 4: Top / 4 kW / 40 mm - Spindle 5: Universal / 4 kW / 40 mm - Spindles: 5 - Working width: 230 mm Dedpfxez Nyfzj Al Ssku - Working height: 120 mm - Feed: 3 kW - Planing table length: 2,000 mm

Condition: excellent (used), Catalog number 7706 TECHNICAL DATA - max width of workpiece 220mm - max height of workpiece 120mm - 5 spindles: 1) horizontal lower 220mm 4kW 2) vertical right 120mm 3) vertical left 120mm; 2 and 3 7.5kW 4) horizontal upper 220mm 5.5kW 5) horizontal lower 220mm 4kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - pneumatic pressure rollers - 4 infeed rollers from above, toothed, including 1 double roller - outfeed roller from above, smooth, rubber - outfeed roller from below, rubber - feed on cardan shafts - stepless feed speed adjustment 6-36m/min - feed motor 2.2kW - lifting motor 0.25kW - with brake - electric adjustment of planing thickness Dodpez Nlgqsfx Al Seku - central lubrication of the table - length of infeed table 1970mm - diameter of extraction nozzle 4x120mm, 140mm - dimensions L/W/H 3450x1600x1450mm - weight 1112kg Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number 7294 TECHNICAL DATA - Max. width of workpiece: 230mm - Min. width of workpiece: 15mm Djdpfx Ajz Nlc Eol Seku - Max. height of workpiece: 160mm - Min. height of workpiece: 10mm 7 spindles: 1) Horizontal, lower: 230mm, 7.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Vertical, right: 160mm, 5.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, upper: 230mm, 7.5kW 7) Horizontal, lower: 230mm, 5.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - Motor: 2 x 0.37kW - Spindle diameter: 40mm - All spindles equipped with a brake From above: - 8 feed rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, toothed, rubber, double rollers From below: - Feed roller, toothed, pulling, pivoting - 3 discharge rollers, pulling, metal, smooth - Rollers pneumatically pressed - Length of feed table: 2480mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth feed rate adjustment on a frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Diameter of dust extraction port: 7x125mm - Dimensions (L/W/H): 5520x1930x1900mm - Weight: approximately 4000kg ADVANTAGES – With 7 heads – Ideal for both wet and dry wood – With ATS – Original DTR documentation + CE – Unpainted – Used planer, in perfect condition Original photos Net price: 156900 PLN Net price: 36500 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2205027, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Smartmac LMC-423S with 4 spindles, manufactured in 2022. Equipped with an extended infeed table of 2.5 m (instead of 2 m) and a Schneider Easyset touchscreen control. Dkjdpfxoz Ngimj Al Ssu

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2105025, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Compact LMC-523C with 5 spindles, manufactured in 2021. Working width 15 - 230 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm for sequential feed). Spindles: 3 x 7.5 HP and 2 x 10 HP, spindle speed 6,000 rpm, spindle diameter 40 mm. Feed motor 5 HP with inverter, feed speed 6 - 24 m/min. Fully enclosed machine with sound insulation, chrome-plated feed table, pneumatic pressure rollers with 3 adjustment positions, and a solid cast iron frame. Connection 380 V / 50 Hz, CE version. Options: infeed table 2.5 m (instead of 2 m), pneumatic side pressure roller on the left spindle, split pressure roller at the top, additional tables for multiple sawing on the 2nd bottom spindle, anti-kickback device, and Schneider Easyset touchscreen (1 x conventional and 2 x NC). Dkodpfxoz Ngitj Al Sju

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2201010, Four-sided planer Leadermac Compact LMC-530C with 5 spindles, year of manufacture 2022. Working width 15 - 300 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm with sequential feed), infeed table 2500 mm. Spindles: 15 HP, 10 HP, 10 HP, 20 HP and 20 HP, diameter 50 mm, 6,000 rpm. Feed motor 7.5 HP, 6 - 24 m/min. Schneider 5.7-inch touchscreen EASYSET with NC control of axis 3 (left radial), axis 4 (top radial) and height adjustment of the pressure bar. Pneumatic left side pressure roller, two-part pressure shoe, extra table and anti-kickback device for multiple sawing. Dksdpfx Aloz Ngiyj Seu

Condition: used, Year of construction: 1992, Weinig UNIMAT 17 A comb, 6 spindles + universal, with pneumatic feeder for long pieces, functional, used. Dodpfx Alsz I Thlj Seku Optionals: code 926030 Return belt from 5500 mm with stacking unit 4-piston pneumatic ejector code 926031

Condition: good (used), Year of construction: 1977, functionality: fully functional, Weinig Type PFA 250/85 Year of manufacture: 1977 1 U-7.5 kW 2 R-7.5 kW 3 L-11 kW Djdpfxjz I A N Ee Al Ssku 4 R-5.5 kW 5 O-11 kW 6 O-7.5 kW 7 U-7.5 kW 8 Uni 7.5 kW Table: 2.5 m Spindles 6 and 7 with jointer Feed: 5.5 kW

Condition: used, Year of construction: 1995, Scorniatrice brand SCM model Superset 23 Plus, 6 spindles + 1 universal Composition: - lower kw. 5.5 - right kw. 5.5 - left kW 7.5 - right kw. 5.5 - upper kw. 7.5 - lower kw 5.5 - universal 5.5 kW - trailer motor kW 5.5 - proximate drawbar wheels for short pieces - complete with CE Certification and manuals Optionals (we can sell the machinery alone or the complete group): 926033 Trimmer Loader brand Friulmac model FN3 926035 Return carousel parts Return belt for parts Minimum working height: mm. 6 Maximum working width: mm. 230 Maximum working height: mm. 120 Shaft diameter: mm. 40 Vertical spindle length: mm. 150 (utile 130) Power of vertical shaft motor: kW 8 Upper horizontal engine power: kW 5.5 Lower horizontal motor power: Kw. 4 Dsdpfxsz Izqzs Al Soku Feedrate motor power: Kw. 4

Condition: used, Features Siemens IE3 type electro magnetically braked motors All spindle motors with Star delta starting system Edge reference straightening system 65 mm high fences Telescopic bedplates between vertical spindles Infeed side pressure unit Double side pressure unit opposite fence side head moving with near side head with pneumatic loading Adjustable side guides after near side head Pad pressure after top head with vertical screw adjustment and mechanical digital readout 2000 mm pre-straightening infeed table with fence each 10 mm adjustment 40 mm diameter spindles belt driven, with spindle speed of 6000 rpm All spindles have horizontal and vertical adjustment, with mechanical digital readouts for fast and accurate setting Dkedpfx Alsz Il Tgo Sou Independent manual vertical adjustment to top head High precision spindle units with high speed bearings All bedplates and fences have 0.3 mm hardened chrome HRC at 60° Automatic bed lubrication system with timer control Chipbreaker assembly before first and second top head with twin cylinder pneumatic loading One piece heavy duty cast iron main frame with optimum vibration absorption Centralised lubrication system to all main slides Vertical spindles have 80 mm vertical adjustment Horizontal spindles have 40 mm horizontal adjustment Safety interlock at infeed to prevent feeding oversized material ATS electronic positioning by keypad control and motorised adjustment to near side spindle horizontal movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) ATS electronic positioning by keypad control and motorised adjustment to first top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at first top head ATS electronic positioning by keypad control and motorised adjustment to second top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at second top head Note: The REC-720 LED dual readouts are linked together with the main REC-705B controller so that they both read the same whether the spindle is adjusted from the top head position manually or at the infeed controller with motorised adjustment – both top heads move together. Lift up sound and safety enclosure including internal lighting and safety interlocks Interlock to lift up enclosure Dust extraction hoods outlet diameter 150 mm Toolkit Instruction and maintenance manual, electrical diagram and parts list. Machine supplied with electrics arranged 3/50/415 V 1 no. CE Pressure Regulator Machine conforms to CE specification

Condition: excellent (used), Year of construction: 1990, SCM P64 Four-Sided Planer Infeed table length 2300 mm Planning width 180 mm Planning height 105 mm Feed rate 6 and 12 m/min Spindle diameter 35 mm Axial adjustment of the planing head for profiling 15 mm Motor power, infeed side 4 kW Motor power, thicknessing roller 4 kW Dkodpfx Alez Ii A Ee Ssu Motor power, right and left rollers 5.5 kW Weight 1200 kg Dimensions 2820 x 1220 x 1920 mm Condition: Functionality tested.

Condition: used, Year of construction: 2012, Composition: Dkjdpfx Asz Ihwhel Seu 6 stations + 1 universal station Electronic speed controller 230mm/150mm Chrome table Trainer in the table Lubrication 380 V

Condition: like new (used), Year of construction: 2025, Spindle configuration: Dksdsz H Uliopfx Al Sou 1. Spindle: Surfacing spindle – 4 kW 2. Spindle: Vertical spindle, right – 5.5 kW 3. Spindle: Vertical spindle, left – 5.5 kW 4. Spindle: Upper horizontal spindle – 4 kW 5. Spindle: Lower horizontal spindle – 4 kW 6. Spindle: Universal spindle – 4 kW Spindle speed: 6,000 rpm Spindle diameter: 40 mm Working area Working width: 25–230 mm Working height: 10–120 mm Min. workpiece length: 450 / 630 mm (depending on the model) Feed rate Continuously adjustable: 5–25 m/min Feed rollers Ø 140 mm Infeed table 2,000 mm Tooling range Vertical spindles: 100–180 mm Horizontal spindles: up to 180 mm Max. profile depth, vertical: 40 mm Equipment Manual table and central lubrication Robust industrial design, smooth operation and high precision

Condition: used, Wadkin Bursgreen T500 Thickness Planer Specifications: Manufacturer: Wadkin Bursgreen, England Model: T500 Machine no.: T500 8552 Djdpfsz H Sakjx Al Sjku Max. capacity (width x thickness): 508 x 250 mm Feed speed: 6–18 m/min (infinitely variable) Main motor: 5.5 kW Cutterblock speed: 4,500 rpm Cutting circle diameter: 120 mm Max. stock removal per pass: 10 mm Sectional feed rolls Sectional chipbreaker and anti-kickback fingers Overload protection Floor space: 1000 x 1030 mm Weight: 580 kg

Condition: used, System Hall Moulder Infeed Table (2005) with Hydraulic Drive Used moulder infeed table for sale, manufactured by System Hall AB, Sweden. It consists of a chain cross transfer conveyor and an infeed section with pneumatic hold-downs, and it feeds timber into the moulder automatically and evenly. The hydraulic motors have had their seal kits replaced. Specifications: Manufacturer: System Hall AB, Falkenberg, Sweden Year: 2005 (CE) Overall length: 7.5 m Height: 1.85 m Infeed section length: 2.25 m Dedpfx Alez H I R Es Sjku Infeed section width: 0.9 m Drive: hydraulic (separate hydraulic power unit with electric motor), SEW gear motors Pneumatic cylinders for clamping and positioning Chain cross transfer with roller chains Included: hydraulic power unit, 4 toothed pulleys.

Condition: used, Second-hand automatic planing and grooving machine, part of a Weinig Hydromat 2000 pre-planing line, with feed mechanism (tilting destacking). The machine has already been dismantled and is ready for loading. The images contain AI-generated sample images for illustrative purposes. The illustration may contain errors. Technical data: - Spindles: 5 Dodpfx Aez Hy H Ssl Soku - Spindle 1: Bottom / 11 kW / 50 mm / 6,000 rpm - Spindle 2: Left / 11 kW / 50 mm / 6,000 rpm / Jointer - Spindle 3: Top / 18.5 kW / 50 mm / 6,000 rpm / Jointer - Spindle 4: Bottom / 11 kW / 50 mm / 6,000 rpm / Jointer - Spindle 5: Right / 11 kW / 50 mm / 6,000 rpm - Working width: 175 mm - Working height: 80 mm - Feed: 15 kW / 100 m/min - Control: CNC memory system - Max. workpiece length: ~ 6,000 mm

Condition: used, Year of construction: 2008, functionality: fully functional, Friulmac ECOFEED infeed conveyor for four-sided planers Working length: 250-1550 mm Tabletop mounting Automatic and manual cycles Djdpfxez Hn I Do Al Seku

Condition: good (used), Year of construction: 2010, Weinig Powermat 500 Number of spindles: 6 Year of manufacture: 2010 Planing width: 230 mm Planing height: 120 mm Feed rate: 5 - 30 m/min Feed motor: 4 kW Infeed table length: 1,000 mm 1 driven toothed roller in the table 2 driven smooth rollers in the table Spindle 1: round, 40 mm Spindles 2-3-4-5-6 with HSK mount Powercom Control Dkjdpfsz Hm R Dex Al Sju Spindle arrangement: Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 15 kW Top: 11 kW Bottom: 11 kW

Condition: excellent (used), The WEINIG CUBE four-sided planer is offered as a used machine. The machine features a reversible knife system, electric height adjustment, and a lubricant pump. Width and height are displayed via laser. The equipment also includes a Cube Mech stacking system. Dsdpfxoz Hk Slj Al Ssku Technical data: Planer width: 260 mm Planer height: 160 mm Number of spindles: 4 Motor, spindle 1: 5.5 kW Motor, spindles 2 + 3: 5.5 kW Motor, spindle 4: 5.5 kW Feed speeds: 6-12 m/min Dust extraction port Ø: 250 mm Quality information: - Feed system checked - Table guides checked - All settings checked - Complete basic inspection - Complete basic cleaning - Pneumatics checked - Ready for immediate use

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom spindles diameter 40mm variable regulated feeder feeder with cardan pneumatic pressure of feeding rolls Dodpez Hcvcsfx Al Seku table lubrication

Condition: excellent (used), working width 230mm working height 120mm 4 spindles spindles diameter 40mm pneumatic pressure of feeding rolls two axes heads regulation two feeding speed delta/star start electric regulation top head Dodpfx Aljz Hcldo Sjku

Condition: excellent (used), working width 230mm Djdpfx Asz Hcipol Ssku working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table