Werny Maschinenhandel

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,696 h, travel distance X-axis: 550 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 425 mm, controller manufacturer: FANUC, controller model: Series 21M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis CHIRON FZ 12 S High speed was manufactured in 1996. It features an X-axis travel of 550 mm, Y-axis travel of 330 mm, and Z-axis travel of 425 mm. The machine has a spindle speed of 12,000 rpm and a tool capacity of 12 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 12 S High speed vertical machining centre we have for sale. Contact us for further details. • Installed options: Preparation for 4th and 5th axis (control cabinet ready) • Status: Powered on, fully functional • Machine hours: 5,696 h Additional equipment Lsdpfx Absywy Sneveri • Pneumatic vices • Approximately 40 tool holders • Chip tray Technical Specification Taper Size SK 30

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Mitsubishi, controller model: M80B, table load: 255 kg, spindle speed (max.): 20,000 rpm, HAITIAN PRECISION TAPPING CENTER V-180 SHOWROOM MODEL, AS GOOD AS NEW V-180 specification: Controller:M80B Spindle air blow Spindle air seal Spindle oil chiller Pneumatic and lubrication system Coolant system Rigid tapping Direct drive spindle 20000rpm 16T disc type ATC 3-color signal lamp,working light X travel mm 500 Y travel mm 400 Z travel mm 330 Spindle nose to table surface mm 150-480 Lodpjywvh Eefx Abvsri Table size mm 650×400 Table load kg 255 T slot mm 14×125×3 Drive type Direct drive Max.spindle speed rpm 20000 Spindle power (S1/S6) kW 3.7/5.5 Spindle torque (S1/S6) N.m 11.7/17.5 Spindle taper BT30 Pull stud MAS-P30T-1 Rapid traverse (X/Y/Z) m/min 48/48/48 Cutting feedrate (X/Y/Z) m/min 30/30/30 Max.tool dia. (Adjacent/Vacant) mm Φ60 / Φ80 Max.tool length mm 250 Max.tool weight kg 3 Tool change time s 1.6 Positioning accuracy X/Y/Z mm 0.010 Repeatable positioning accuracy X/Y/Z mm 0.006 Power capacity kVA 15 Machine weight t 2.5 Machine size(L×W×H) mm 1620×2080×2380

Condition: used, Year of construction: 2015, X/Y/Z - 350/550/510 mm A-axis (tilting) +30 deg./-120 deg. C-axis 360 deg. Table size 500 mm dia. Max. table load 300 kg. Spindle taper SK 40 Spindle speeds 18.000 rpm Internal high pressure coolant through spindle 35 bar Lrsdpfx Absywi Dtjvei Number of stations in tool changer 40 pcs. Control: Siemens Sinumerik 840 D SL Equipped with: Renishaw RMP 600 Chip conveyor

Condition: used, Year of construction: 2000, functionality: unexamined, machine/vehicle number: 63349, CNC vertical machining center Ljdpfsyv Axbex Abvori

Condition: excellent (used), Year of construction: 1996, operating hours: 9,700 h, DMG Vertical Machining Center Model: DMU 50 V Year of manufacture: 1996 5 axis Travel X-axis: 500 mm Travel Y-axis: 380 mm Lsdpfoyvzq Nox Abvjri Travel Z-axis: 380 mm Spindle taper: BT 40 Spindle speed : 8,000 rpm Tools in magazine: 24 piece Control: Deckel Maho Mill Plus Spindle hours: 9700 Interface: RS-232 C 30 tool holders

Condition: ready for operation (used), Year of construction: 2003, Immediately available from training center: CNC machining center Chiron Type FZ 12 W Magnum High Speed, year of manufacture 2003, very few operating hours, Sinumerik 840 D – S, table 850 x 350 mm, travel X/Y/Z 550/300/425 mm, SK 40, 20-position tool changer, spindle speeds 60 – 10,500 rpm, table load 150 kg, spindle 18 kW, chip conveyor, weight 4 tons. Price: EUR 6,000 plus VAT ex location. Ledpfsyvzdpsx Abvori

Condition: like new (used), Year of construction: 2012, ARES – SEIKI MACHINING CENTER Lsdsyvrmnepfx Abveri AS NEW! MODEL: R5630 YEAR OF FIRST INSTALLATION: 2012 TABLE SIZE: 650 mm x 410 mm DISTANCE BETWEEN TABLE AND SPINDLE NOSE: 180 – 480 mm TRAVEL: X: 560 mm Y: 400 mm Z: 300 mm TAPER: BT 30 10 TAPER HOLDERS INCLUDED SPINDLE SPEED: 12,000 RPM MAXIMUM TABLE LOAD: 250 kg TOOL MAGAZINE: 14 POSITIONS COMPLETE WITH ALL DOCUMENTATION

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Lredpfx Absyvkuqovei #Tags: DMU50Evo | DMU50 Evo | 50Evo

Condition: used, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 6,000 rpm, CNC Fanuc Travel: 500x380x330 mm ISO 30 6000 rpm Lsdeyuwvwopfx Abvori Star-type tool magazine with 10 positions

Condition: used, Year of construction: 2009, functionality: fully functional, Vertical Machining Center Type No: TMV720A Working Area (L × W) 800 mm × 480 mm (31.5" × 18.9") Travels X Travel: 480 mm (12.2") Y Travel: 530 mm (20.8") Z Travel: MAX 630 mm (24.8") Distance Between Spindle Table Top: MIN 100 mm (3.9") Max Table Load 500 kg (1100 LBS) Table Height 900 mm (35.43") Rapid Traverse (X/Y/Z) 48 / 48 / 48 m/min Servo Motor X: 1.8 kW Y: 1.8 kW Z: 2.5 kW Spindle Spindle Nose: BT No.40 Spindle Speed: 8000 – 10000 RPM Spindle Motor: 5.5 / 7.5 kW Coolant Motor 0.55 kW (0.75 HP) Tool Selection Random Tool Capacity 24 (MAX) Max Tool Diameter 80 mm (3.14") Max Tool Dia × Length 250 mm (9.84") Max Tool Weight Ljdpfsyuvivsx Abvsri 7 kg Tool Holder BT40 Machine Height 2580 mm Net Weight 3800 kg Floor Space (L × W) 2000 mm × 2380 mm Machine Precision Position: 0.01 mm / full travel Dependable Degree: ±0.005 mm

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 430 mm z-travel 510 mm control Mazatrol Smart table surface area 900 x 430 mm max. table load 500 kg number of spindle speeds 40-12000 U/min rapid speed 42000 mm/min tool magazine with 30 Plätzen max. tool diameter 125 mm weight of the machine ca. 4800 kg Just 4,362 hours of pure machining! Capacity: External dimensions of the machine table: 900 x 430 mm Travel range X/Y/Z axis: 560/430/510 mm Distance from spindle head to table surface: Min: 150 mm Max. 660 mm Spindle: Spindle speed: 40-12000 (two electrical stages) Feed rate: Rapid traverse speed: 42000 mm/min Cutting feed rate: 1-8000 rpm ATC magazine: Tool magazine slots: 30 Tool shank type: MAS BT-40 Max. tool diameter: with adjacent tools: 80 mm without adjacent tools: 125 mm Max. total weight of tools in magazine: 120 kg Equipment/accessories: Coolant system Vices (not shown in the photo) Tool holders Lsdpfx Aoyukgiebvori Tools Documentation

Condition: good (used), Year of construction: 2015, Table size 320mm, Traverses X Y Z 400 x 560 x 400mm, A axis +120/-30 degrees, C axis 360 degrees, Spindle speed 12,000 rpm, spindle taper BT40 24 station ATC, Siemens 828 control, swarf conveyor Ljdpfxsyt Hd Io Abvsri

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Spindle Speed 6000rpm, HAAS Control, Ledpfxjyt Hbgo Abveri 20 Station ATC, Coolant

Condition: used, Year of construction: 2005, operating hours: 50,636 h, functionality: fully functional, machine/vehicle number: 111555, Equipment: chip conveyor, For sale: Brother TC-32B QT, a compact and reliable CNC machining center, ideal for precise milling operations in workshop and production settings. The machine is in well-maintained condition and has been serviced regularly. Technical Data & Machine Details Manufacturer: Brother Model: TC-32B QT Machine No.: 111555 Year of manufacture: November 2005 Operating hours: 50,636 h (as of 15/08/2025) Condition & Usage The machine has been operated in a clean industrial environment and is fully functional. Thanks to Brother’s proven technology, it offers high process stability and short chip-to-chip times. Despite its year of manufacture, it continues to deliver reliable and precise performance, making it perfect for small batch production or auxiliary manufacturing tasks. Special Features - Compact, space-saving design - Fast tool changes thanks to Brother’s signature linear system - High repeat accuracy - Robust and durable machine construction Fields of Application Ideal for: - Metal and plastic processing - Training workshops Lodpfx Asyttllsbveri - Prototype manufacturing - Small and medium series production Conclusion A solid and proven CNC milling machine, which thanks to its precision and reliability, remains a valuable production asset. Perfect for businesses seeking a cost-effective and efficient manufacturing solution.

Condition: excellent (used), Year of construction: 2004, Great opportunity to buy this 5 axis machining center with automatic loading cell. Including: Set of toolholders High pressure cooling through the spindle chip conveyor Paper belt filter Oil mist extraction Programmable coolant jet Heidenhain measuring probe TS 641 Tool breakage control BMO automatic loading cell with Yaskawa Motoman robot MH50 (installed in 2014) Including: 40 pallets 300 x 300 mm 40 Gressel clamps 4-way 0-span module Schunk Yaskawa DX100 controller X 500 mm Y 420 mm Z 380 mm Control Heidenhain TNC 530 Max spindle speed 18.000 rpm Power 35kW Tool magazine 60 tools Tool holder SK40 Lrodpfx Ajyr N Rhjbvji This machine combination can be inspected in operation upon appointment. Availability: April-May 2026 More information available on request. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: Series 16i-MB, table load: 250 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis FANUC ROBODRILL α-T21iD was manufactured in 2003. It features an X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a maximum spindle speed of 10,000 rpm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-T21iD vertical machining centre we have for sale. Contact us for further details. Lrjdpfx Asyrrxzjbvoi • Rapid feeds (X/Y/Z): up to 54 m/min • Installed electrical power: 10 kVA • Supply voltage: 200–220 V, 50/60 Hz, three-phase • Total cutting time shown: 1,448 h

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: FANUC, controller model: Series 16i-M, table load: 250 kg, overall weight: 2,100 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, number of axes: 3, This 3-axis FANUC ROBODRILL α-T14iB was manufactured in 2000. It features an X-axis travel of 500 mm, Y-axis travel of 380 mm, and Z-axis travel of 300 mm. The machine has a maximum spindle speed of 8,000 rpm and a tool changer capacity of 14 tools. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-T14iB vertical machining centre we have for sale. Contact us for further details. • Rapid feeds (X/Y/Z): up to 48 m/min • Installed electrical power: 10 kVA Lredeyrrlnepfx Abvji • Supply voltage: 200–220 V, 50/60 Hz, three-phase • Registered cutting time: 8,235 h Technical Specification Taper Size BT 30

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: Series 16i-M, table load: 250 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, number of axes: 3, This 3-axis FANUC ROBODRILL α-T14iB was manufactured in 1997. It features an X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a maximum spindle speed of 8,000 rpm and a tool changer capacity of 14 tools. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-T14iB vertical machining centre we have for sale. Contact us for further details. Lodpfx Aeyrq Uhsbveri • Rapid feeds (X/Y/Z): up to 48 m/min • Installed power: 10 kVA • Supply: 200–220 V, 50/60 Hz, 3-phase • Registered cutting time: 15,291 h Technical Specification Taper Size BT 30

Condition: used, Year of construction: 2001, HSC milling machine Ingersoll OPS 600, year of manufacture 2001 Lsdjyrb T Ispfx Abvsri

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,500 h, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 15,000 rpm, number of axes: 3, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It features a Siemens 840D control unit, with impressive travels of 450 mm in the X-axis, 270 mm in the Y-axis, and 310 mm in the Z-axis. The machine includes a 40-position tool changer and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining centre we have for sale. Contact us for further details. • Overhaul: Factory overhauled and technically updated by Chiron (CMS) in 2017 • Last Spindle Replacement: September 2025 • Last Maintenance: Major annual service (4,000 h) performed in October 2025 • NC Swivel Head Range: −20° / +115° • Rapid Feed X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool Changer: 40 positions, HSK-A40 • Chip-to-Chip Time: 2.6 s (vertical) • Rotary Table: AWU 160 with D105 mm positioning axis • Operating Hours: Approximately 22,500 h Additional equipment • Clamping: Hainbuch Spanntop D100 collet chuck • Bar Loader: IRCO SiMag 100.1-3000 for round and profile material • High Pressure Coolant: 70 bar with Vario valve • Coolant Filtration: Knoll VRF, 400-liter vacuum rotation filter Lsdpfsypb Tpsx Abvjri • Chip Conveyor: Scraper belt, 1,050 mm discharge height • Measurement/Monitoring: Renishaw TS27R 3D touch probe; tool life monitoring; tool breakage control • Collision Monitoring: Brankamp Marposs CMS 100 • Guide Channel Sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool Holders: Approximately 500 pieces HSK-A40 • Spare Parts: Included for this machine type • Operating Materials: Specific operating fluids/materials included

Condition: good (used), Year of construction: 2007, functionality: fully functional, Vertical CNC Machining Center Chiron FZ OSK S Magnum SK with NC swivel head, rotary table package, bar feeder, and discharge unit Year of manufacture: 2007, Factory overhaul in 2017 Operating hours approx. 22,500 h Technical data: Siemens 840D (PCU 20 / NCU 572.4) NC swivel head, swivel range -20° / +115°, water-cooled motor spindle, 15,000 rpm. Axes travel X 450mm / Y 270mm / Z 310mm Rapid traverse in X / Y / Z: 75 m/min. / Acceleration: X 1g / Y 1.5g / Z 2g 40 tool stations HSK-A 40, chip-to-chip time 2.6 sec. (vertical, to DIN standard) Additional equipment: Preparation for bar machining Rotary table package AWU 160 with D105mm (positioning axis), Hainbuch Spanntop collet chuck D100, additional equipment for 6th side machining Part removal handling and discharge unit for finished parts, bar loader IRCO SiMag 100.1-3000 (for round and profile material) Coolant gun, machine prep for high-pressure ICS 70 bar (vario-valve), fixture flushing Scraper-belt chip conveyor with discharge height 1050 mm, vacuum rotation filter VRF 400 ltr., manufacturer KNOLL MAHLE dual change-over filter Electrical cabinet cooler, signal light Tool life monitoring, tool breakage control, Single F500 3D probing system, Renishaw TS27R Brankamp Marposs collision monitoring CMS 100 Accessories: Breuning IRCO guide channel sets and Hainbuch collets (as per agreement) HSK-A40 tool holders Spare parts for this machine type including special operating materials Note on machine concept: Unmanned complete machining 24/7 of cubic components. Material supply via bar loader D100 / 3000 mm for round and profile material. Rotary table as positioning axis and machining of 4 surrounding faces via vertical milling spindle. Machining of the end face (5th side) horizontally with swivel head. Clamping of workpiece via clamping stock, separating workpiece and 180-degree rotation, machining of the 6th side again horizontally with swivel head. Removal handling and discharge unit into parts buffer. Note on machine condition: The machine was factory overhauled and technically updated in 2017 by Chiron (CMS). The last spindle replacement was carried out in September 2025. The last manufacturer service was in October 2025 (major annual maintenance, 4,000 h). Lsdpjypbmcsfx Abvori From new until today, the machine has been continuously maintained, repaired, and kept up-to-date by the manufacturer through a full-service contract (preventive maintenance).

Condition: good (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 260 mm, table width: 770 mm, table length: 320 mm, overall weight: 1,500 kg, For sale: 1 used milling machine Manufacturer: W. Fehlmann AG Maschinenfabrik Model: 51 DC Lrsdpfx Abjynwf Sjvei Year of manufacture: 1994 Technical data: Travel: 450 x 260 x 560 mm Table size: 770 x 320 mm The machine is in a very well-maintained condition and can be inspected at our warehouse in 09599 Freiberg.

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, table load: 120 kg, overall weight: 1,500 kg, For sale: 1 used milling machine Manufacturer: W. Fehlmann AG Maschinenfabrik Model: 51 CNC Year of manufacture: 1995 Technical data: Working area: 420 x 240 x 120 / 450 mm Control: Heidenhain TNC 355 Table: 720 x 280 mm / 120 kg load capacity Spindle taper: SK 30 Further technical details can be found in the photos. Lsdpfx Asynwfxsbvori The machine is in very well-maintained condition and can be inspected at our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Lrjdpsynnu Djfx Abvsi Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), TECHNICAL DETAILS CNC Control: FANUC Series 31i-A5S X axis (mm): 500 Y axis (mm): 350 Z axis (mm): 510 B axis (mm): +160 to -180 C axis (degrees): 360 Number of pallets: 1 Table size (mm): Ø350 Table load capacity (kg): 300 Cutting feed rate X,Y,Z (mm/min): 50,000 / 50,000 / 40,000 Maximum rapid traverse X, Y, Z (m/min): 50 / 50 / 40 Spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Taper type: BT-40 Torque (Nm): - Lodpfeym Rt Tex Abvori Tool changer type: Chain Tool magazine capacity: 120 positions Max. tool diameter (mm): 90 Max. tool diameter with adjacent positions empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts: Included Work light: Included Through-spindle coolant system Hydrajet WP10-1000: Included Electronic handwheel integrated into CNC panel: Included Coolant oil separator: Included MACHINE DIMENSIONS Length (mm): 2,339 Width (mm): 3,820 Height (mm): 3,250 Weight (kg): 9,400