SEMI-AUTOMATIC VERTICAL BAND SAW

BEHRINGER LPS-T

Condition: new, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 600 mm, cutting width (max.): 620 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 3,120 mm, total length: 2,900 mm, total width: 2,750 mm, overall weight: 3,200 kg, table height: 1,150 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the LPS-T band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long blade life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force application of the saw feed is located directly below the cutting point. Servo feed system The use of the Behringer servo feed system ensures a constant chip removal rate and makes better use of the capabilities of modern saw blades. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloads and premature wear of the saw blades. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large chip conveyor with an integrated coolant tank. The chips and coolant generated are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be moved out of the machine frame. Adjustable material support table For easy loading and unloading using a crane, the material table under the saw unit can be moved out. NC measuring device Optionally, the LPS-T band saw can be equipped with an NC-controlled measuring device. The cutting depth is digitally pre-programmed in the control panel. The material to be cut can be quickly aligned on the measuring device when placed and then securely clamped. This significantly speeds up the setup process. Fast blade change ensures the shortest setup times. In just two to three steps, the saw blade can be brought into the change position. Blade guide parts made of cast iron Lajdpfez Rzg Asx Ah Sjh are made by Behringer and ensure vibration damping directly at the cutting point, thus increasing the tool life. Compact Due to its compact dimensions, the band saw can be installed even in confined spaces. Driven duplex chip brushes effectively clean the saw blade, thereby increasing the tool life. The brushes are automatically adjusted to the saw blade and ensure consistent cleaning performance.

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Lasdpfxeufgb Ij Ah Ssh

Condition: used, Year of construction: 2017, Behringer LPS 60-T – Vertical metal band saw - Servo feed with cutting pressure control - Robust cast iron band guide - Fast band change - Operating hours of the saw drive: 32441 h - Year of manufacture: 2017 Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (incl. base pan) - Cutting speed: 10 - 110 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tension pressure: 85 bar - Coolant quantity: approx. 100 l - Motor power – Saw drive: 5.5 kW - Motor power – Hydraulic pump: 2.2 kW - Motor power – Coolant pump: 0.15 kW - Motor power – Chip conveyor: approx. 0.26 kW - Connection value: approx. 10.5 kW Lasdpfxjz H Ac As Ah Sjh - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current consumption: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, cutting width (max.): 440 mm, control type: PLC-controlled, total height: 1,600 mm, total length: 3,300 mm, total width: 1,500 mm, overall weight: 4,700 kg, cutting range round steel at 90°: 440 mm, Equipment: CE marking, documentation/manual, Automatic band saw for Aluminium, capacity Ø 440 mm, 90°-cut, cutting speed 200-1100 m/min stepless, motor 22 kw, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device with filter, dimension 3300x1500x1600 mm, weight ca. 4700 kgs Lasdsy Awagopfx Ah Sjh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation. Lajdpow Tulgofx Ah Soh

Year of construction: 2016, condition: ready for operation (used), Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible. Ledjyx H E Rspfx Ah Soah

Condition: used, Year of construction: 2014, Behringer LPS 40-4 - Vertical metal bandsaw - Hydraulic band tensioning - Servo-controlled feed - Sturdy C-frame - Year of manufacture: 2014 Technical data - Working area (L x W x H): 4000 x 680 x 400 mm - Smallest cutting height: 10 mm - Minimum cutting width: 15 mm Laedpfjz H Acpex Ah Soh - Inner table support area: approx. 680 x 4000 mm - Inner table maximum load: 7500 kg - Outer table support area: approx. 680 x 4000 mm - Outer table maximum load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tensioning pressure: 85 bar - Coolant capacity: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connection value: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V= (DC) - Current consumption: approx. 25 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 6450 x 2870 x 2350 mm - Weight (net): approx. 10000 kg

Year of construction: 1998, condition: ready for operation (used), Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible. Lodpfjyln A Njx Ah Sjah

Condition: used, Behringer VPS60-220A - Industrial Plate Sawing Machine The BEHRINGER VPS60-220A is a fully automatic industrial plate sawing machine / vertical bandsaw. It is designed for sawing large metal plates, slabs, and blocks across the grain – in particular, steel, aluminum, and other metals. - Chip conveyor - Safety device consisting of a safety fence and light barriers - Staircase - Operating manual and technical documentation - Year of manufacture: 2015 Technical Data - Cutting range (W x H): 2250 x 600 mm - Minimum flat (W x H): 500 x 20 mm - Maximum round: 500 mm - Minimum remaining piece length in automatic operation: from 40 mm - Minimum remaining piece length in manual operation: from 30 mm - Saw band dimensions: 11080 x 54 x 1.6 mm - Cutting speed: 17 – 120 m/min - Material support height: approx. 1650 mm - Quantity of coolant: approx. 250 l - Motor power – sawing drive: 7.5 kW Lsdpfoz H Ac Nex Ah Soah - Motor power – hydraulic pump: 2.2 kW - Motor power – coolant pump: 0.33 kW - Motor power – chip conveyor: approx. 0.25 kW - Connection value: approx. 15 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current consumption: approx. 35 A - Fuse rating: 50 A - Minimum cable cross-section: 35 mm² - Machine dimensions W x H x D: 17793 x 9817 x 4500 mm - Weight (net): approx. 19000 kg