Cb-Med

Condition: used, functionality: fully functional, mileage: 376,691 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Fpedpfxeyi Apls Abuec Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.

Condition: used, functionality: fully functional, mileage: 473,883 km, power: 331 kW (450.03 HP), first registration: 07/2021, fuel type: diesel, overall weight: 8,418 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features BigSpace L-cab, Actros model generation 5, wheelbase 3850 mm Engine version Euro VI, D, 449 Hp,330kW (449hp),2200 Nm, Batteries 2 x 12 V/220 Ah, low-maintenance Mercedes PowerShift 3 Transmission, High Performance Engine Brake ADR type class AT Tank,880l+90l AdBlue,left,735x700x2305 alu.,step, Second tank,540 l,right, 735x700x1250 mm,aluminium Driver comfort Automatic climate control, Power windows, all-round Driver's suspension seat, comfort, Multifunction steering wheel Co-driver's suspension seat, comfort, Armrests on both sides, co-driver's seat Smoker package Auxiliary hot water heater, cab Pull-out refrigerator, under bed Flexible shelving sys.,f. stowage above windscreen, Drawers, under bed, Drawer, under dash support Tilting sunroof, electric, Sunblind, side, driver's side, Sun visor, exterior, transparent Luxury bed, top, narrow, Luxury bed, bottom Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Disc brakes on front and rear axle Electronic braking system with ABS and ASR, Stability Control Assist (ESP) Front spring, 7.5 t, 2-leaf Rear axle - air Tyres 315/70R22.5 Drive program fleet, Navigation system Fifth wheel coupling, standard, Jost JSK 37C Axle load measuring device Heat insulation, additional Max capacity fuel tanks Safety Cruise control Predictive Powertrain Control Lane Keeping Assist, Traffic Sign Assist Attention Assist Active Brake Assist 5 Technology Multimedia Cockpit, interactive, Preinstallation Mercedes-Benz Truck App Portal, Standard loudspeake Truck Data Center 7 FleetBoard Eco Support, Interface, fleet management system FMS Exterior Fully painted cab LED daytime running lamps, Foglamps, halogen Headlamp cleaning system, Side marker lights, Ambient lighting Air deflectors, corner panels, Kerb mirror Front mirror, heated, MirrorCam, MirrorCam switch, on bed Fpedpfjyi Apfex Abujc Locking system, with central locking, 2 remote control keys

Condition: excellent (used), mileage: 870,413 km, power: 331 kW (450.03 HP), first registration: 10/2017, fuel type: diesel, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: retarder, = Additional options and accessories = Fpodpoyi Anuefx Abujc - Intarder = Notes = WDF9634031B990273 = Further information = Number of cylinders: 6 Technical condition: very good Visual condition: very good Please contact Sales for further information. = Company information = If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights may be derived from the provided information. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (available via WhatsApp and Viber). MOB: Dutch only (available via WhatsApp and Viber). When paying by bank transfer, funds must be transferred to our bank account below. Always verify the payment details listed on our website. If you receive different information, please contact us. If you have any doubts, please call so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: ready for operation (used), Tool Milling Machine MAHO MH 800 incl. Tool Holders - Travel X / Y / Z 700x350x450 mm - Table clamping surface 940x510 mm - Spindle mount ISO 40 - Vertical - horizontal milling device - Spindle speeds 32 - 1600 rpm (gear-driven) - Automatic longitudinal / cross feeds Fpedpfoyi Annsx Abuoc - Automatic feed / vertical milling head - Coolant system - Tool holders - Documentation - Further technical data see data sheets Dimensions: L x W x H 1.9x1.7x1.9 meters / Weight 3500 kg Errors and omissions excepted.

Condition: good (used), axle configuration: 3 axles, first registration: 11/2021, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, suspension: air, color: white, Year of construction: 2021, Equipment: tail-lift, Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 7.640 kg Carrying capacity: 33.360 kg GVW: 41.000 kg Fpodpeyi Anbofx Abuoc Functional Tail lift: DHOLLANDIA DHSMR.30, slider lift, 2500 kg Maintenance, history and condition APK (MOT): tested until 11/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: excellent (used), functionality: fully functional, Brabender Single Screw Extruder 30 mm – 25 L/D – with K-Tron Twin-Screw Feeder – Strand Die For sale is a fully operational Brabender single screw extruder in a compact design, ideal for laboratory, development, or small-scale production applications. Technical Data: • Manufacturer: Brabender • Screw diameter: 30 mm • Processing length: 25 L/D • Drive: 5.5 kW • Multi-zone heating system (5 zones) • Compact control cabinet with digital temperature control • Strand die fitted Equipment: • K-Tron twin-screw feeder • Compact, intuitive control unit • Multiple heating zones with separate control • Melt temperature & melt pressure measurement Condition: Fpodpfx Abjyi Am Rjuec • Fully functional • Well-maintained overall condition • Immediately ready for use A trial run with customer material can be arranged by prior appointment.

Condition: like new (used), Year of construction: 2012, operating hours: 24,864 h, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain iTNC 530, workpiece diameter (max.): 380 mm, workpiece weight (max.): 2,500 kg, total height: 2,480 mm, total length: 1,970 mm, total width: 2,730 mm, overall weight: 6,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2012 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 125-500 Feed rates m/min: 50 Rapid traverse m/min: 80 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: 450x400 Maximum workpiece size (D x H) mm: Ø380 Max. workpiece weight kg: 2500 Table rotation speed rpm: 1200 Spindle Fjdoyi Am Djpfx Abuspc Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 Equipment Chip conveyor Infrared probe blowing air through spindle center selectable via M-function Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Machine running times Under power: 46650 Spindle Working: 24864 Rated power kVA: 46 Basic machine dimensions / weight Length mm: 1970 Width mm: 2730 Height mm: 2480 Weight kg: 6900

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Fpsdpfx Aoyi Amwebusc Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: used, mileage: 710,301 km, power: 353 kW (479.95 HP), first registration: 12/2019, fuel type: diesel, tire size: 315/70R22.5, tire condition: 50 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 590 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, cruise control, fridge, parking heater, = Additional options and accessories = - Radio/CD = Further information = General information Cab: SSC Technical information Number of cylinders: 6 Axle configuration Tyre size: 315/70R22.5 Front axle: Tyre tread: 50%; Reduction: single reduction; Suspension: parabolic suspension Rear axle: Tyre tread: 70%; Reduction: single reduction; Suspension: air suspension Fsdjyi Amqjpfx Abujpc Weights Unladen weight: 7,933 kg Payload: 11,567 kg Gross vehicle weight (GVW): 19,500 kg Layout Number of sleeping berths: 2 Condition Damage: none = Company information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a dependable part of Heisterkamp Transportation Solutions. We handle pre-owned trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: used, mileage: 654,413 km, power: 353 kW (479.95 HP), first registration: 09/2018, fuel type: diesel, tire size: 315/70R22.5, tire condition: 50 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,180 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, fridge, parking heater, = Additional Options and Accessories = - Radio/CD = Further Information = General Information Cabin: SSC Technical Information Number of cylinders: 6 Axle Configuration Tire size: 315/70R22.5 Front axle: Tire tread: 50%; Gear reduction: single reduction; Suspension: parabolic suspension Rear axle: Tire tread: 80%; Gear reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,933 kg Payload: 11,567 kg Gross vehicle weight: 19,500 kg Layout Number of beds: 2 Condition Damages: none = Company Information = Fpjdpfjyi Amkjx Abuoc Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet current requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, mileage: 727,765 km, power: 353 kW (479.95 HP), first registration: 01/2019, fuel type: diesel, tire size: 315/70R22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,180 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, fridge, parking heater, = Additional options and accessories = - Radio/CD = Further information = General information Cab: SSC Technical information Number of cylinders: 6 Axle configuration Tyre size: 315/70R22.5 Front axle: Tyre tread: 40%; Reduction: single reduction; Suspension: parabolic springs Rear axle: Tyre tread: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,933 kg Payload: 11,567 kg Gross vehicle weight (GVW): 19,500 kg Layout Number of sleeping berths: 2 Condition Damages: none = Company information = Fodpfx Abjyi Amdjujpc Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: used, mileage: 538,732 km, power: 353 kW (479.95 HP), first registration: 09/2018, fuel type: diesel, tire size: 315/70R22.5, tire condition: 50 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,180 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2018, Equipment: ABS, cruise control, fridge, parking heater, = Additional options and accessories = Fsdpfx Abeyi Al Tjuopc - Radio/CD = Further information = General information Cab: SSC Technical details Number of cylinders: 6 Axle configuration Tyre size: 315/70R22.5 Front axle: Tyre tread: 50%; Reduction: single reduction; Suspension: parabolic springs Rear axle: Tyre tread: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,933 kg Payload: 11,567 kg Gross vehicle weight: 19,500 kg Layout Number of berths: 2 Condition Damages: none = Company information = Heisterkamp Used Trucks BV does not just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: used, mileage: 800,158 km, power: 353 kW (479.95 HP), first registration: 01/2019, fuel type: diesel, tire size: 315/70R22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,180 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, fridge, parking heater, = Additional Options and Accessories = Fpodpfx Ajyi Alyjbuoc - Radio/CD = Further Information = General Information Cab: SSC Technical Information Number of cylinders: 6 Axle Configuration Tire size: 315/70R22.5 Front axle: Tire tread: 40%; Reduction: single reduction; Suspension: parabolic spring Rear axle: Tire tread: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,933 kg Payload: 11,567 kg gross vehicle weight: 19,500 kg Layout Number of beds: 2 Condition Damage: none = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s standards, and comply with the high requirements of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: used, Year of construction: 2012, Overview  This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data  Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h Fpodoyi Almepfx Abusc

Condition: used, Holz Her Sprint 1329 Power Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 21.5" PPC 332 touchscreen control fa.s.t. setting technology “Set-up on the fly” Motorized, CNC-controlled bridge height adjustment Fully automatic edge magazine for roll and strip material (MOT) Pre-milling unit for jointing before the gluing station GLU-JET glue application station – for cartridge, granulate & PU adhesive, thin film technology Maximum edge height: 60 mm Adjustable glue height / sensing nozzle Pressure unit 1913, motor-driven and pneumatic NC servo axis End trimming unit for roll and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of the end saw angle from 0-10° MOT6 multi-function milling unit – 6 NC-controlled axes: Flush trimming 8 mm (15 mm) Radius milling Bevel milling 0–15° pneumatically MOT4 copying milling unit – 4 NC axes, corner copying, postforming corners: for machining the upper and lower longitudinal edge, and copying the front and rear vertical edges; working height 60 mm, includes shelf program MOT4 scraper unit Flat scraper unit – finish with pre- and post-sensing Buffing unit for final cleaning and edge polishing with 2 textile discs, tiltable by 5° Spray units for entry and exit section as well as antistatic agent at the pressure unit Entry section: electronically controlled separating agent spraying system Pressure unit: electronically controlled antistatic spraying system Exit section: electronically controlled cleaning agent spraying system with detergent Air cushion table at feeding side / L = 1800 mm, W = 600 mm First delivery in 2022 Fpsdpfx Abeyi Algeusc Machine is WORKSHOP TESTED and in TOP CONDITION Available ex stock Lieboch

Condition: used, mileage: 58,262 km, power: 71 kW (96.53 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,500 mm, first registration: 05/2020, fuel tank capacity: 80 l, CO₂ emissions: 196 g/km, emission class: euro6, color: black, number of seats: 3, number of previous owners: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, General information Number of doors: 5 Model range: Jun 2019 - May 2020 Cab: single Technical information Torque: 260 Nm Number of cylinders: 4 Engine capacity: 1.598 cc Transmission: 6 gears, Manual gearbox Acceleration (0-100 kph): 15,4 s Top speed: 154 km/h Measures length/height: L2H1 Dimensions (LxBxH): 540 x 196 x 197 cm Weights Empty weight: 1.782 kg Carrying capacity: 1.248 kg GVW: 3.030 kg Interior Interior: black Fpodpfx Aeyi Alaebuec Consumption Average fuel consumption: 6,4 l/100km (44 MPG) Urban fuel consumption: 8 l/100km (35 MPG) Extra urban fuel consumption: 5,4 l/100km (52 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): New APK (MOT) upon delivery Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Condition: excellent (used), mileage: 468,796 km, power: 169 kW (229.78 HP), first registration: 01/2004, fuel type: diesel, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: semi-automatic, emission class: euro3, loading space length: 7,100 mm, loading space width: 2,470 mm, loading space height: 2,450 mm, Year of construction: 2004, Equipment: tail-lift, XLEP4X20004480737 Cooling unit brand: Thermo King = Further information = Front axle: Steered Unladen weight: 320 kg Tail lift: dhollandia, 1,500 kg Fpsdpfeyi Ak Njx Abuoc Refrigeration engine: Diesel and electric Technical condition: Very good Visual condition: Very good Please contact Sales for more information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: Mobile: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber) Mobile: Dutch only (Available on WhatsApp and Viber) When you pay by bank transfer, the money must be transferred to our bank account below. Always check the payment details listed on our website. If you have received other information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, machine/vehicle number: 20082500, number of ink cartridges: 10, number of print heads: 10, number of feeding trays: 2, counter reading (color): 85,723, year of last overhaul: 2024, Equipment: raster image processor, type plate available, Good morning We have an AEOON COMPACT SERIES DTG printer for sale. Fpsdpfxsyi Ak Ae Abuec The machine was purchased and installed in June 2022 and operated until mid-2025. During this time, it was regularly serviced by the distributor. The machine features two separate printing stations, which makes work much easier and faster. The AEOON requires a printhead replacement. We will assist with packaging and transport.

Condition: like new (used), Year of construction: 2021, operating hours: 637 h, functionality: fully functional, Carbide circular saw sharpener from 80 to 840mm. Like new, only 637 operating hours. Simultaneous mounting of back and face grinding wheels. Sharpens all tooth profiles. Mist extraction system. Training and delivery available. Fpsdpfxeyi Akco Abusc

Condition: used, mileage: 78,030 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,060 mm, first registration: 01/2019, fuel tank capacity: 60 l, CO₂ emissions: 166 g/km, emission class: euro6, color: white, number of seats: 2, number of previous owners: 3, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: May 2018 - Apr 2024 Cab: single Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Transmission: 6 gears, Manual gearbox Measures length/height: L2H1 Dimensions (LxBxH): 494 x 184 x 185 cm Weights Empty weight: 1.591 kg Carrying capacity: 814 kg GVW: 2.405 kg Interior Interior: black Consumption Average fuel consumption: 4,7 l/100km (60 MPG) Urban fuel consumption: 5 l/100km (56 MPG) Extra urban fuel consumption: 4,5 l/100km (63 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): New APK (MOT) upon delivery Fedpfxsyi Ai Ej Abuspc Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Condition: like new (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 52 mm, spindle speed (max.): 3,000 rpm, overall weight: 4,800 kg, The machines were purchased in August 2025 and have only been operated for testing purposes (up to 20 operating hours). Due to a change in business priorities, the planned production will not be launched. The machines are under lease with PKO Leasing S.A. until August 2028. Outstanding balance: approx. PLN 274,000 – monthly installment approx. PLN 7,308 net, final value PLN 87,800. Settlement terms are to be negotiated. We prefer a lease transfer, but a cash purchase is possible with the lessor's consent. Fjdpfx Ajyi Aixobuopc

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, injection pressure: 2,470 bar, overall weight: 10,500 kg, controller model: UNILOG B8, TECHNICAL DETAILS Clamping force: 2,100 kN Screw diameter: 50, 55, 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Maximum screw speed: 278 rpm Screw torque: 1,920 Nm Fsdpfx Ajyi Ailjbujpc Calculated shot volume: 540, 653, 913 cm³ Specific injection pressure: 2,470, 2,041, 1,461 bar Max. plasticizing rate: 42, 52, 62 g/s Nozzle stroke/Nozzle force: 400 mm / 100 kN Free-flow injection rate: 248, 300, 419 cm³/s Barrel heating capacity: 21.9, 24.2, 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control type: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrics Drive power (hydraulic pump): 37 kW Max. screw cylinder temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 – 1.5 m³/h Max. cooling water inlet temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Sound level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure switch-over range 1: 20,000 pC Kistler module for cavity pressure switch-over range 2: 10,000 pC

Condition: good (used), Year of construction: 2002, Koenig Eco Twin Bun Line - used - year of manufacture approx. 2002 - electronic control - Rex Basic divider - year of manufacture 2009 - 5-row Fpodoyi Aifepfx Abujc - capacity approx. 6,000 pcs/h - suitable for buns: Kaiser, round, star, challah, elongated - machine in working condition/for overhaul - collection from warehouse/shipping option - price on request

Condition: used, functionality: fully functional, mileage: 87,769 km, power: 88 kW (119.65 HP), number of beds: 4, number of seats: 4, fuel type: diesel, gearing type: mechanical, color: white, first registration: 06/2023, chassis manufacturer: Fiat, chassis model: Ducato 2.3 Mjet, total length: 5,990 mm, total width: 2,050 mm, total height: 2,520 mm, axle configuration: 2 axles, emission class: euro6, fuel tank capacity: 90 l, overall weight: 2,810 kg, operation weight: 3,500 kg, steering wheel position: left, number of previous owners: 1, Year of construction: 2023, machine/vehicle number: ZFA25000002W61051, Equipment: ABS, air conditioning, airbag, all-season tires, bathroom, bunk beds, car registration, central locking, differential lock, electronic stability program (ESP), fog lights, middle seating arrangement, non-smoking vehicle, onboard kitchen, power assisted steering, second-hand vehicle warranty, shower, summer tires, truck registration, winter tires, We offer flexible consumer credit options for easy, stress-free purchases! The Nomad campervan is designed for travelers seeking freedom and comfort on the road. Whether you’re planning a weekend getaway or a longer road trip, this campervan is engineered to meet all your travel needs with reliability and practicality. 💰 Guaranteed warranty and money-back guarantee ✔ 1-year Indie Campers warranty 🛡️ ✔ Satisfaction guaranteed! Try it for 14 days and if you’re not satisfied, we’ll refund your money! ✔ Recently inspected and ready for the road! Fpodsyi Ahzjpfx Abuec What makes this camper special? ✅ Spacious and comfortable: 599 cm in length and 252 cm in height, offering plenty of room to relax. ✅ Fuel efficient and powerful: 2.3 Mjet diesel engine, 120 HP, manual transmission, and Euro 6 emission class. ✅ Ideal for 4 people: Features 4 seats and 2 beds, perfect for families or group travel. ✅ Fully equipped for the road: Includes gas heating, auxiliary heater, air conditioning, and separate shower. ✅ Safety and convenience: Equipped with ABS, ESP, rear parking sensors, and power steering for smooth driving. ✅ Try before you buy – Not sure if it’s right for you? You can rent the campervan for as many days as you want to familiarize yourself and make sure it’s perfect for your travels.

Condition: excellent (used), mileage: 492,911 km, power: 316 kW (429.64 HP), first registration: 04/2008, fuel type: diesel, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: mechanical, emission class: euro4, Year of construction: 2008, Equipment: retarder, = Further Information = Unladen weight: 14,790 kg Payload: 17.2 kg gross vehicle weight: 32,000 kg Tipper: Rear Technical condition: very good Optical condition: very good Please contact Sales for further information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: Mobile: (Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: (Dutch) Available via WhatsApp and Viber. When paying by bank transfer, please ensure the money is transferred to the bank account indicated below. Always check the payment details on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal Fpedpfxsyi Ahus Abujc IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U