Used extraction systems for sale (78)

Condition: good (used), Year of construction: 1996, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system Celhcdwszyt Irexshb -Manufacturer: Donaldson Torit, filter system for extraction system -Type: IDFP2 -Cartridge filter: see photos -Inlet/Outlet: Ø400 mm / Ø250 mm -Extraction capacity: 2500 m³/h -Pressure: 2370 Pa -Motor power: 3 kW -Filter dimensions: 1800/1200/H1780 mm -Weight of filter: 350 kg -Blower dimensions: 600/750/H1070 mm -Blower weight: 75 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Coral, Dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm Celhcdjrw A U Iewxehb -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: excellent (used), Year of construction: 2017, Separator, dust separator, welding fume filter, filter system, cartridge dust extraction system, cartridge filter unit, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel Chelheytgrxjcdwxsb -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm Colhsy R S E Hscdwxehb -Note: filter unit only, without extraction fan Quantity: 1 piece available -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm Cjlhcdwozukp Aexjhb -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge. -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: like new (used), Year of construction: 2015, Suction capacity without/with dust bag: 1800/1520 m³/h Chslhcdwjzvm I Doxsb Spindle speed: 2800 rpm Drive motor: 400 V, 0.75 kW

Condition: ready for operation (used), Awatech electrostatic system Dimensions approximately 140x60x60cm Colhcjzwl Dyedwxohb The system was operational until it was dismantled. No further information is available; however, the price is very attractive.

Condition: used, Year of construction: 2010, Losma Darwin 2000 D Dust Extraction Systems 5 units with pre-filter, 2 units with turbine only The systems are sold as is, see pictures. The systems were fully functional until dismantling. The systems are available immediately. The Darwin series is a range of centrifugal dust extractors for cleaning air containing oil-based mists, micro-mists, and vapors that are generated during the use of coolants (emulsions and neat oils). Chjlhjzwlvcjcdwxjb It can be used on all types of machine tools and in all machining processes. The Darwin series uses a double combination of filtration: dynamic (through the rotation of the centrifuge) and static (with the integrated post-filtration system) to guarantee high performance.

Condition: ready for operation (used), Year of construction: 2000, There are 13 LTA Type IR dust extraction systems available. They are from various production years (1997-2001), but are all the same type. The systems will be dismantled in week 35 and will then be available for delivery. The ionizer and collector will be cleaned in an ultrasonic bath, and the housing will be wiped down. More systems will become available in the coming months. Chelhozv Ttascdwxjb 20 x LTA AC3001 R, production years 2004-2011.

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Chelhewnprxjcdwxsb Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: used, Radial fan with an aluminum cast housing, filter fan Motor power: 1.8 kW Mains connection: 380 volts, 50 Hz Cholsztrv Iehcdwxsb Weight: approx. 30 kg

Condition: used, Year of construction: 2018, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 10,000 m³/h, total height: 2,150 mm, total length: 2,400 mm, total width: 1,800 mm, overall weight: 1,250 kg, We are offering this used KEMPER 811000100FU extraction system, manufactured in 2018. Type: 811000100FU Airflow rate: 10000 m³/h Voltage: 400 V Rated current: 13.8 A Motor power: 7.5 kW Current: 3 ~ Frequency: 50 Hz Duty cycle: 100% Protection class IP: Control voltage: 24 V Minimum compressed air supply: 5 bar Maximum compressed air supply: 6 bar Chjlszk Dukshcdwxeb Maximum static pressure: 2500 Pa Weight: 1250 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Intake temperature: 20° Density at the intake manifold: 1.2 kg/m³ Volumetric flow rate: 8.3 m³/min Chslezn Rfkjhcdwxob Engine speed: 2,882 rpm

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Colhcoxxalnsdwxjhb Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: used, Approximately 10 used filter and extraction systems from the renowned Italian manufacturer LOSMA are available for sale. These include various models and designs. The systems are used to purify exhaust air from machine tools and to separate oil mist, micro-mist, and vapors that are generated during machining processes using coolants. They are suitable, for example, for lathes, milling machines, grinding machines, and other machine tools. Colhjztbbgscdwxjhb A total of approximately 10 LOSMA filter systems are available. Models, year of manufacture, technical specifications, and condition may vary depending on the unit. We will gladly provide further images, nameplates, and technical data for each filter upon request. Individual sales as well as the purchase of multiple units or the entire package are possible after consultation. An on-site inspection and testing can be arranged. The price depends on the model, condition, and quantity purchased. We look forward to receiving your inquiry. All information is provided to the best of our knowledge. Errors and prior sale are reserved.

Condition: used, Radial fan KEMPER for extraction or ventilation, type 37N290/0J1 Device No.: 1.8011 Art. No.: 853.103 Year of manufacture: approx. 1990 Air volume flow rate: 1700 m3/h Intake pipe: internal diameter 150 mm Exhaust pipe: internal diameter 150 mm Motor speed: 2800 rpm Motor power: 0.75 kW Power connection: 400 Volts, 50 Hz - Housing made of aluminum casting - Impeller made of aluminum casting - very robust design Space requirement L x W x H: 450 x 420 x 400 mm Weight: 20 kg Cholhezpbrwocdwxsb in good condition Ideal for welding fume extraction 2 units available, price per unit

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 0.14 kW (0.19 HP), input voltage: 230 V, type of input current: AC, volume flow: 1,890 m³/h, filter area: 7.9 m², noise level: 65 dB, actuation type: electric, total height: 575 mm, total length: 600 mm, total width: 590 mm, overall weight: 55 kg, Equipment: CE marking, documentation/manual, LTA electrostatic extraction system 2 units, left and right intake The intake nozzle can be screwed on as needed; currently, there are none, as it was previously mounted directly on the housing wall. Colozqttcshcdwxjhb In very good, fully functional condition; naturally, it has been completely cleaned. Available for immediate delivery.

Condition: excellent (used), Volume flow 3000 Chelhsilug Secdwxsb Pressure 3400 Pa Filter 30 m2 Spindle speeds 2850

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Chslhcdwsznibwexeb Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1998, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system -Manufacturer: BTR Environmental, Unicell cartridge dust extraction system -Type: C16-2K7 -Extraction fan power: 3.0 kW Colsu Uww Sohcdwxshb -Inlet: Ø 220 mm -Individual components: see photos -Dimensions: 1210/1040/H2340 mm -Weight: 474 kg

Condition: good (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system Chjlhcey Nnkvsdwxeb -Manufacturer: Donaldson, Filter system cartridge filter -Type: Torit Downflo DF 6 -Motor power: 3 kW -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic -Extraction opening: 3x Ø 320 mm -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg

Condition: good (used), Year of construction: 2006, Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter Chslhcdwoiz Udwoxob -Manufacturer: WW, oil mist separator filter system type ME-FI 600 -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm -Weight: 38 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system Cjlhcewrb I Hjdwxshb -Filter system: -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter Cjlhjyh Hp Rjcdwxehb -Filter system: with vibrator -Type: TMS 8/10 -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm -Dimensions: 1070/680/H2530 mm -Weight: 243 kg

Condition: excellent (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Filter holder: Gauze holder for extraction, mobile Cholhcdweyznk Hjxeb -Carrier frame: made of stainless steel -Extraction area: Internal dimensions 1900/440/H1060 mm -Dimensions: 2130/530/H1830 mm -Weight: 74 kg