Jansen Machinehandel BV

Condition: used, functionality: fully functional, Machine Type: TORNOS MS7 – Single-Spindle Swiss-Type Automatic Lathe Application Area: Automatic machining of bar stock with Barboy magazine loader (feed system) Fedpsyir I Dofx Abuepc Typical Workpiece Parameters: • Max. permissible bar diameter: approx. 10 mm • Max. turning length (without attachments): approx. 60 mm (with flat cams) Machine Dimensions (approx.): • Length: approx. 1440–1500 mm • Width: approx. 900 mm • Height: approx. 1500 mm Weight: • Machine only: approx. 700–880 kg • With Barboy equipment: approx. 1800 kg Spindle / Performance: • Spindle speed range: up to approx. 12,000 rpm • Spindle bore: approx. 11 mm • Motor output: typically several 4 kW motors Tooling / Axes: • Number of toolholders: approx. 5 Voltage / Connection: • 380 V / 50 Hz, three-phase Barboy magazine loader including conveyor, splitter, and accessories Overall dimensions of machine + Barboy: approx. 4500 × 600 × 1400 mm Weight incl. Barboy: approx. 1800 kg

Year of construction: 1984, condition: ready for operation (used), Immediately available from business closure: Motorized four-roll sheet bending machine Manufacturer: RAS Model: 44/10 Year of manufacture: 1984 Bending length: 1020 mm Material thickness up to 4 mm Drive power: 1.5 HP Fedpfx Abeyilpfeuopc Weight: 800 kg Offered at EUR 2,000—plus VAT, ex location

Year of construction: 1996, condition: good (used), functionality: fully functional, machine/vehicle number: 26 628, Technical specifications: Cutting length: 5000 mm Saw blade: 420 mm Fpodpfx Absyill Hjuoc with roller conveyor Saw unit swiveling and tilting

Year of construction: 1981, condition: ready for operation (used), - USED - DOUBLE COLUMN MECHANICAL PRESS TONNAGE: 400 ton Fsdpfjyigv Hox Abuepc WORKTABLE: 2750 x 1520 mm INNER SLIDE TRAVEL: 600 mm PLATE HOLDER TRAVEL: 200 mm PLATE HOLDER CAPACITY: 75 ton USEFUL HEIGHT: 980 mm MOTOR POWER: 50 kW

Condition: ready for operation (used), - USED - DOUBLE COLUMN MECHANICAL PRESS TONNAGE: 900 ton Fpedpfx Absyigvyouec WORKTABLE: 4572 x 2438 mm INNER SLIDE TRAVEL: 940 mm USEFUL HEIGHT: 1408 mm DISTANCE BETWEEN UPRIGHTS: 4672 x 1900 mm WORKING SPEED: 8 - 18 mm/sec

Year of construction: 2020, condition: used, Vixen Wash Type TSC with Siemens Simatic HMI Control with (2) x Filter Mists, Basket Size 490mm x 490mm. S/No. 3029 (2020). Country of Origin: United Kingdom Fpodpfxeyidrlo Abuec Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 1991, condition: used, machine/vehicle number: 5385, comprising: Magazine loader SIEMENS, year of manufacture: 1991, serial no.: 5385, ERSA ERS 503 reflow oven, serial no. 8596-003, rated power 38 kW, PCB conveyor ALL SMT C-100LD-2-L, year of manufacture: 2016, width: approx. 100 cm, weight: 90 kg, pick-and-place machine ASM Siplace D1i, serial no.: C3052-12040561, year of manufacture: 2013, net weight: approx. 2,000 kg, with 28 feeder slots, pick-and-place machine ASM Siplace D1i, serial no.: C3052-12040560, year of manufacture: 2013, net weight: approx. 2,000 kg, with 28 feeder slots, including magazine trolley, PCB conveyor NUTEK NTM410L-350-1, year of manufacture: 2014, width adjustable, stencil printer (solder paste printer) DEK Horizon 03, serial no.: 282950, year of manufacture: 2004, de-magaziner SIEMENS, serial no.: 5385, year of manufacture: 1991, incl. accessories such as feeders and PCB magazines. Fpjdpfeyidkuex Abuec

Year of construction: 2019, condition: ready for operation (used), number of axes: 4, Machine tool manufactured in 2019... This Elumatec's Aluminum Profile Processing Line – SBZ 131 + DG 104 offers a complete processing line for aluminum and steel profiles. It features an integrated solution for cutting, mitre cutting, and complex profile machining, optimized for serial production. Consider the opportunity to buy this Elumatec's Aluminum Profile Processing Line – SBZ 131 + DG 104. Contact us for further details. • Complete processing line for aluminum and steel profiles • Ready-to-run configuration for immediate production • Industrial environment; very good overall condition • Integrated solution covering cutting, mitre cutting, and complex profile machining • Working length: 7.2 m • Capabilities: • Complete profile machining in a single setup • Turret tool system with fast tool change • High industrial precision • Optimized for serial/mass productionDouble Mitre Saw Fodpfxoyic Tbo Abuopc • Cutting length: 6.0 m • Features: • Pneumatic tilting and rotation • Large-diameter saw blades • High precision and repeatability • Minimal material wasteApplications / Ideal for • Aluminum windows and doors manufacturers • Industrial profile processors • Façade systems and structural profile manufacturers • Plants expanding capacity or upgrading technology

Condition: used, Year of construction: 1986, functionality: unexamined, machine/vehicle number: HM32, stroke length: 10,000 mm, coil weight: 2,000 kg, Complete used line for continuous extrusion of aluminum, conform process, Holthon Machinery brand, model C300H. Fjdpfjyic Rtex Abuspc

Condition: used, functionality: fully functional, overall weight: 140 kg, total length: 3,300 mm, total width: 1,320 mm, machine/vehicle number: 0027, Welding jig for railing construction Insert bars, adjust shear, weld: With the patented Crea-Star welding jig, you can fabricate railings in half the time. - Mobile with castors - Additionally extended supports - Includes Excel calculation program - Cover tarp is also included Fpsdpfeyh Nhvsx Abuec

Condition: new, Jackson Translight 555+ Welding Helmet ADF Welding Helmet with ADF black TECHNICAL DATA Viewing area: 98 x 82 mm Optical clarity: 1/1/1/1 True Color: yes Weight: 612 g Protection level open: 3 Protection level closed: 5-8/9-14 Control: Digital Step adjustment: yes / internal Sensitivity adjustment: yes / internal Delay adjustment: yes / internal Grinding mode: yes / external Switching time: 0.2 ms Power supply: Solar cells & lithium (CR2032) batteries Fodpfx Abjyh H Adjujpc

Condition: ready for operation (used), Year of construction: 1988, Immediately available from university: CNC Trumpf Punching Machine Type: Minimatic 100 Fsdpfxjyh Aa Sj Abuopc Year of manufacture: 1988 Press force: 15 t Control: Sinumerik 3 N Drive: 7.5 kW Sheet thickness: 1 – 4 mm Travel X/Y: 750/750 mm Axis movement X/Y: 750/750 mm Weight: 4 t Many tools included Price: EUR 4,000 excluding VAT, ex location

Condition: excellent (used), thread dia. 36 mm Fpsdpfx Abjyhq S Eoujc

Condition: used, Struers Type: Struers Accutom-5 Struers Accutom-5 Precision Cutting Machine Laboratory saw including accessories & cutting discs Description: For sale is a Struers Accutom-5 precision cutting machine. This is a high-quality laboratory and precision saw designed for accurate sectioning of metals, ceramics, minerals, electronic components, sample materials, and workpieces with minimal deformation and excellent cut quality. Ideal for material testing, metallography, precision engineering, research, workshops, or laboratory use. The machine operates with adjustable speed, feed control, and integrated cooling, enabling precise, clean, and reproducible cuts. Extensive accessories and several original Struers cutting discs are included (see photos). Features: - Precise sectioning of materials and sample specimens - Adjustable cutting speed and feed rate - Minimal material loss due to precision cutting - Automatic or manual cutting operation - Recirculating coolant system to protect the sample and cutting disc - Adjustable cutting force (low / medium / high) - Programmable cutting modes - Very smooth operation and accurate positioning Technical Data: Device: Struers Accutom-5 Precision Cutting Machine Speed: 300 – 3000 rpm Feed: 0.005 – 3.0 mm/s Positioning speed: X/Y each 13 mm/s Cutting force: approx. 20 N / 40 N / 60 N Cutting discs: Diameter: 75 – 152 mm Max thickness: 2 mm Mounting hole: 12.7 mm Max sample size: Clamping length: up to 225 mm Cutting length: up to 30 mm (with Ø 20 mm sample) Coolant tank: approx. 4 liters Noise level: approx. 65 dB(A) Power / Electrical: Mains voltage: 220 – 240 V Frequency: 50 – 60 Hz Power input: approx. 370 W Current consumption: approx. 2.7 – 3 A Fuse: 6.3 A slow-blow Dimensions & Weight: Width: approx. 510 mm, Depth: approx. 700 mm, Height: approx. 270 mm Weight: approx. 45 kg Important note: "The table shown in the photos is not included in the sale." Fodpfsyhpqgjx Abuopc Condition: used Scope of delivery (see photos): - Struers Accutom-5 cutting machine - Several original Struers cutting discs (Diamond / SiC / Al2O3 depending on set) - Sample holder / clamping accessories (see photos) - Documentation / manual / spare parts documents - Integrated coolant tank (Subject to changes and errors in the technical data. All information provided without liability!) We are happy to answer further questions for you by phone.

Year of construction: 2022, condition: used, We offer this used CHAIN MAKING MACHINE, model CHAIN MAKING MACHINE, year of manufacture 2022. MACHINE FOR PRODUCING CHAINS IN GOLD, SILVER, BRASS. If you have any questions or require further information, please do not hesitate to send us a message or call us. Fedpsyhnuwsfx Abujpc

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 1,700 mm, total width: 610 mm, total length: 780 mm, throat depth: 500 mm, pressing force: 6 t, working height: 1,033 mm, stroke length: 80 mm, Equipment: documentation/manual, Insertion and clinching equipment. Robust, lightweight, and compact machines that provide reliability and accuracy for your operations. Fully hydraulic and precise, these units guarantee reliable insertion at any point along the punch stroke. Equipped with a dual integrated safety system, featuring a distance sensor on the punch holder. Operated via a dual electric safety foot pedal. Includes integrated software and a 4” touchscreen display. Pre-loaded library with insert definitions and relevant force settings. Fully updatable and manageable. (Available models with insertion capacities of 6 t, 10 t, or 15 t.) FEATURES: • Electronic adjustment of pressing time (0 to 5 sec). • Adjustable punch return stroke. • Controlled punch movement throughout its entire stroke. • Precision stop system to improve insertion on soft materials such as fiberglass, PCBs, etc. • Multi-die system allows for up to 4 different dies to be mounted, with automatic detection of the working position. • Suitable for clinching operations on thicknesses from 1 to 6 mm. • Compatible with all types of inserts. • Suitable for any material: copper, aluminium, carbon steel, and stainless steel. • Automatic feeding system (PLUS models only). • Laser pointer (optional). • Brush table (optional). 60 NC: Force (t): 6 Adjustable stroke (mm): 0 – 80 Throat depth (mm): 500 Working height (mm): 1033 Power (kW): 2 Dimensions (LxWxH, mm): 780x610x1700 Weight (kg): 493 Multi-die system allows up to 4 different dies to be mounted, with automatic detection of the working position. Fodpfx Absyhnmyeuopc

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, wire diameter (max.): 4 mm, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, feed length Y-axis: 20,000 mm, The machine is in full working order. It is being sold complete with a mechanical rotary table. The automatic rotary table shown in the photos is not included in the offer. Fpedpfxsyhcq Tj Abujc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21610229, Spring coiling machine WAFIOS ASF3; for torsion and leg springs. Wire diameter: 1.0–3.5 mm. Max. spring diameter: 50 mm. Leg length: 115x130 mm. Fully functional, including accessories (see pictures) and pay-off reel. Fsdpfx Ajyg Nitsbuspc

Year of construction: 1998, condition: ready for operation (used), Immediately available from location: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture: 1998, only very few operating hours (as new) Motorised backgauge Backgauge controlled – 1000 mm Machine control: Siemens Simatic CP 7 Fpjdpsyg Eivefx Abuoc Cutting length: 3050 mm Material thickness up to 10 mm Drive: 15 kW Weight: 8 t Price: €9,500 plus VAT, ex-location

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location CH: Hydraulic press brake with rotary shear and angle adjustment device. Manufacturer: Müller CH. Working length: 6020 mm. Material thickness for metal: 1.0 mm; for aluminium: 1.5 mm. Insertion depth: 1000 mm. Drive: 2 kW. Weight: 3 t. Price: EUR 7,500—plus VAT ex works. Fodpfx Abeyg Eipouepc

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location. Fsdpfx Absyg Eiieuspc

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Type HS 5 / 2550 Year of manufacture 1991 Cutting length 2550 mm Fsdpfxeyg Eicj Abuopc Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Weight 4 tons Price: EUR 4,500 plus VAT, ex location

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 2014.6.2, We are offering our CNC machining center STEINHAUER eCAB WorkCenter, year of manufacture 2014, for sale. The machine is currently still in operation and will be replaced by a newer model as part of a new investment. The eCAB WorkCenter is specifically designed for metal and plastic processing in control cabinet construction. It is ideal for automated drilling, milling, and thread cutting of mounting plates, doors, side panels, and other enclosure components made of steel, stainless steel, aluminum, and plastic. The machine operates based on CAD data and is equipped with a powerful CNC controller and automatic tool changer. Location: Andritz AG Graz, Stattegger Strasse 18, 8045 Graz. Availability: from 02/2026. Technical details and pictures are attached. Fjdpfsyg D Rxsx Abujpc

Year of construction: 2008, condition: used, We are offering this used Böhm Wafios AGH7 wire decoiler/decoiling reel, year of manufacture 2008. Fpodpfx Aboygkz Deuoc

Condition: used, KUKA Robot Central Hand ZH 90 / 120 00-183-002 + 1FK7063-5AF71-1SY3-Z S77 Fodpfx Aeyghw Aobujpc