Schreinerei Schmitt GbR

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating. SINGLE type STW 180/1-36-100-S Serial No.: 130569 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal filling volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Psdpj Agw Erofx Abujrc Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 volts, 50 Hz, with 63 amp CEE plug - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor Prsdpfx Abo Agw Enjuec - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Closed-loop process temperature control for industrial applications in plastics processing, in particular for temperature control of injection molds and other process tools. Manufacturer's serial number: 102010690001 Year of manufacture: 2010 Temperature max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Maximum operating overpressure: 6 bar Pump capacity: 60 l/min. Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Pump motor power: 1 kW Podpfx Aj Agw Ekebuorc Continuous sound pressure level

Condition: used, Band filter system, coolant treatment system, coolant filter AME - AMADA type PS 100 Gravity-fed paper band filter Manufacturer's number 12918, year of manufacture 2017 Filter capacity for emulsion: approx. 100 l/min. Filter capacity for oil: approx. 70 l/min. Tank capacity: max. 300 liters Width of the filter fleece roll: 710 mm Overall height of the filtration unit: 560 mm Submersible pump motor power: 0.24 kW Submersible pump flow rate: 100 l/min. Submersible pump pressure: 0.7 bar Power connection: 400 Volt, 50 Hz. - Submersible pump BRINKMANN, type TB 100 - Tank with 3 float switches - Sight glass for fill level Prsdpfj Agw Egex Abuec - Filter fleece roll housed in a box with a lid - Float switch for filter fleece chain drive - Contamination collection container for filter fleece - Can be moved with a pallet truck, both longitudinally and transversely Space requirement: L x W x H 1700 x 920 x 1100 mm Weight: 230 kg Very good condition Application: Compact filter for coolant, equipped with a roll of filter fleece for cleaning coolants in machining operations. Self-contained cleaning unit, also in combination with chip conveyors, e.g. on machining centers, or as a local filter for several machine tools. Also suitable for grinding machines. Function: Dirty liquid flows into the filter basin and, after passing through the filter fleece and support belt, flows into the clean tank. The retained dirt particles build up a filter cake and increase the flow resistance – the level rises. When a defined height is reached (via a float switch), the band drive is activated, bringing clean filter fleece onto the filter surface. The flow rate increases, and the level of the dirty liquid decreases again. The contaminated fleece ends up in a dirt and sludge container.

Condition: used, L + Z lathe COLCHESTER / HARRISON Type Student VS 3000 Machine No. 306138 / 92 Year of manufacture 1995 Distance between centers 635 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 210 mm Height of centers over bed 165 mm Height of centers over cross slide 105 mm Spindle bore 41 mm Feed Longitudinal and cross Chuck mounting Short taper DIN 55029 D1-4 Camlock Ø 63 mm Tailstock spindle taper MK 3 Prodps Agw Ecefx Abusc Tailstock quill travel 100 mm Spindle speed 20 - 3000 rpm Drive power 5 kW Mains connection 400 Volt, 50 Hz - 2-axis digital display FAGOR, Type VN 300T - AINJEST quick threading device for metric threads directly on the carriage - Spindle speed via 3 gear stages and stepless via frequency converter - 3-jaw chuck with center holes RÖHM Duro Ø 160 mm with stepped jaws - Quick-change tool holder Multifix size B with 2 sets of change cassettes - Folding chuck guard with electrical monitoring - Splash guard on the back of the machine - 1 traveling steady rest - 1 fixed steady rest - 4 machine feet - 1 chuck follower - 4 change gears - Operating manual, electrical diagram and parts list available Space requirement L x W x H 1560 x 1000 x 1660 mm Weight approx. 750 kg very good condition, machine comes from the Helmholtz Institute. Lathe bed and guideways in new condition.

Condition: used, Hydraulic machine vise, high-pressure clamping device RÖHM - DECKEL, type RB 160 Hydraulic vise, clamping device Jaw width: 160 mm Jaw height: 49 mm Clamping force: 5 tons Clamping range: 0 to 300 mm Opening width: max. 308 mm Clamping range: approx. 100 mm (per step) Pjdps Agw D Usfx Abusrc Guide rail height: 118 mm - Clamping force adjustable in 4 steps - 3 clamping ranges adjustable via locking pins - Rotating plate with degree scale Dimensions L x W x H: 570 x 350 x 167 mm Weight: 76 kg Very good condition

Condition: used, Hydraulic valve, servo valve, proportional valve Hydraulic servo valve, continuously variable valve, PARKER DFplus type D1FPE02MC9NB00 20 Manufacturer: Parker Hannifin GmbH Operating voltage: 24 VDC Operating pressure: max. 350 bar Length = 220 mm Pedpfx Ae Agw D Robuorc Width = 48 mm Height = 145 mm Weight: 4 kg Good condition 3 pieces available, price per piece.

Condition: used, GURA roller conveyor with ball-bearing-mounted plastic rollers Roller conveyor length: 2000 mm Roller width: 435 mm Roller diameter: 50 mm Roller spacing: 55 mm Number of rollers: 36 pieces Roller conveyor width with frame profile: 500 mm - Ball-bearing-mounted plastic rollers - U-shaped frame profile made of 2.5 mm aluminum, 100 x 25 mm, profile length 1980 mm - Rollers are positioned approximately 32 mm below the frame profile Prjdj Agw D Hspfx Abusc Space requirement L x W x H: 2000 x 500 x 100 mm Weight: 30 kg Good condition

Condition: used, Universal facing and turning head, similar to the WOHLHAUPTER type, such as UPA 2 Spindle tool, spindle head Mfg. No. 351 Tool holder: MK 2 - M10 Tool shank holder: Ø 12 mm Adjusting accuracy: 0.01 mm Spindle head outer diameter at the knurled wheel: Ø 55 mm Spindle head outer diameter below the scale: Ø 57 mm Psdpfx Abe Agw D Asuerc - Mechanical adjustment from spindle with clamping to planing mode - Holder extension Ø 12 mm Weight: 750 g Good condition The head looks exactly like a Wohlhaupter, and its function is also the same. However, the manufacturer is not indicated, and we cannot confirm that it is an original Wohlhaupter.

Condition: used, Hydromechanical, NC machine vice, VIS - HYDRAULIQUE Precision machine vice, spanner Type 20700 Year of manufacture: approx. 2000 Jaw width: 150 mm Jaw height: 42 mm Clamping range: 0 to 250 mm Opening width: max. 253 mm Clamping force: 6 tons Guide rail height: 51 mm Guide rail length: 450 mm Pedpfx Abo Agw Dxjujrc - Hydromechanical machine vice - Quick adjustment with clamping ball locking in a hole grid, 8-fold - Sturdy base body, ground on all sides - Can be mounted horizontally, vertically or laterally - Guide rail with 15 mm and 19 mm guide groove Dimensions L x W x H: 480 x 150 x 107 mm Weight: 31.5 kg Good condition

Condition: excellent (used), mileage: 848,010 km, power: 368 kW (500.34 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,300 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 8,850 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 9,000 kg, General information Number of doors: 2 Year of construction: 2019 Cab: single Registration number: 67-BND-6 Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Front axle: Max. axle load: 9000 kg; Steering Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 11.605 kg Carrying capacity: 17.995 kg GVW: 29.500 kg Max. towing weight: 50.000 kg Functional Tipper: Back Maintenance, history and condition APK (MOT): tested until 03/2027 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Podpfx Abs Agw Duouorc Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2024, Exhibition and demonstration unit New Kaeser Aircenter SM 16 – 10 bar screw compressor with integrated refrigeration dryer and compressed air tank Sigma Control 2 control system Year of manufacture: 2024 Operating hours: few Pressure: 7.5 bar Rated power: 9 kW Delivery rate: 1.61 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Refrigeration dryer pressure dew point: +3°C Electrically controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Location: available from warehouse 54634 Bitburg - immediately available - Pjdpfx Abj Agw Dmeuorc

Condition: used, mileage: 1,331,662 km, first registration: 09/2020, color: other, driver cabin: other, gearing type: other, emission class: none, suspension: air, number of seats: 2, Equipment: ABS, cruise control, differential lock, onboard computer, trailer coupling, Manufacturer: Volvo - Type/Model: FH-510 6x2 - First registration: 09/09/2020 - Mileage: 1,331,662 km - Cab: L - Parking brake: - Suspension: Air suspension - Lift axle - Steerable axle - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank volume: 16,500 L - Tank compartments: 3 - Insulated - System designation: TIGER - Centrifugal pump - MAK 3003 - Sample probe - Data transmission - CIP cleaning Prodpfe Agw Awsx Abuec

Condition: used, mileage: 1,077,109 km, first registration: 01/2022, color: other, driver cabin: other, gearing type: other, emission class: none, suspension: steel-air, Equipment: ABS, differential lock, onboard computer, Manufacturer: MAN - Type/Model: TGS 26.470 6x2 - First registration: 01/18/2022 - Mileage: 1,077,109 km - Suspension: leaf spring/air suspension - Lift axle - Steerable axle - Air conditioning Pjds Agw Azepfx Abuerc

Condition: used, mileage: 1,016,749 km, first registration: 11/2020, color: other, driver cabin: other, gearing type: other, emission class: none, suspension: steel-air, Equipment: ABS, cruise control, differential lock, onboard computer, Manufacturer: DAF - Type/Model: CF 450 4x2 - Date of first registration: 11/16/2020 - Mileage: 1,016,749 km - Suspension: leaf spring/air suspension - Air conditioning Peds Agw A Eepfx Abuorc

Condition: used, mileage: 636,660 km, first registration: 03/2020, color: other, driver cabin: other, gearing type: other, emission class: none, suspension: air, number of seats: 2, Equipment: ABS, cruise control, differential lock, onboard computer, trailer coupling, Manufacturer: DAF - Type/Model: CF 450 FAN - First registration: 03/23/2020 - Mileage: 636,660 km - Cab: M - Auxiliary brake: - Suspension: Air suspension - Lifting axle - Steering axle - Air conditioning - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank volume: 16,000 L - Tank compartments: 3 - Insulated - System designation: Tiger system - Centrifugal pump - MAK 3003 - Sampling probe - Data transmission - CIP cleaning Prodpfx Abe Agw A Nsuoc

Condition: like new (used), functionality: fully functional, mileage: 434,000 km, first registration: 10/2016, fuel type: diesel, empty load weight: 8,525 kg, maximum load weight: 9,475 kg, overall weight: 18,000 kg, tire size: 315/70 22.5, axle configuration: 2 axles, wheelbase: 5,775 mm, fuel: diesel, energy efficiency: C, fuel tank capacity: 300 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, number of seats: 2, total length: 10,055 mm, total width: 2,550 mm, total height: 3,940 mm, loading space length: 8,150 mm, loading space width: 2,550 mm, Year of construction: 2018, Equipment: ABS, air conditioning, car registration, cruise control, electronic stability program (ESP), lane keeping assist, non-smoking vehicle, power assisted steering, truck registration, Dimensions – Body 8.150 m * 2.55 m * 2.60 m TAULINER BOX + SLIDING ROOF + 1,500 kg RETRACTABLE TAILGATE. Prsdpfo Agw Apsx Abusc Extras: A/C, automatic transmission, engine brake, rear air suspension, cruise control, CD radio, on-board computer, electric windows, collision control, lane departure warning…

Condition: used, mileage: 833,849 km, power: 324 kW (440.52 HP), first registration: 06/2014, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, retarder, soot filter, spoiler, = Additional Options and Accessories = - ADR - Roof spoiler - Speed limiter - Hydraulic tipping kit - Refrigerator - Particle filter = Further Information = Year of manufacture: 2014 Cab: Space Cab Brakes: Disc brakes Front axle: Tire size: 315/80 R22.5; Steerable; Tire tread depth left: 4 mm; Tire tread depth right: 2 mm; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70 R22.5; Tire tread depth left: 5 mm; Tire tread depth right: 5 mm; Suspension: Air suspension Rear axle 2: Tire size: 315/70 R22.5; Dual tires; Tire tread depth left inner: 12 mm; Tire tread depth left outer: 10 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 10 mm; Suspension: Air suspension Unladen weight: 8,416 kg Damage: None Prsdpfx Abj Agw Adeusc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, operating hours: 7,073 h, load capacity: 1,500 kg, lifting height: 5,400 mm, fuel type: diesel, mast type: triplex, power: 35 kW (47.59 HP), Equipment: cabin, sideshift, TCM FG D 15 S diesel forklift Year of manufacture: 1996 According to the hour meter: 7,073 hours Prjds Agw Ahopfx Abuec 1.5-ton lifting capacity 2.35-meter overall height 5.40-meter lift height 35 kW ISUZU diesel engine - Triple-stage free-lift mast - Side shifter - Semi-cabin - Work lights - Pneumatic tires Selling price: 4,950 EUR (no VAT applicable!) Affordable delivery also possible!

Condition: used, mileage: 744,655 km, power: 338 kW (459.55 HP), first registration: 09/2011, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, spoiler, = Additional Options and Accessories = - ADR - Roof spoiler - Speed limiter - Hydraulic tipping kit - Auxiliary drive - Side sills - Alternating current = Further Information = Year of construction: 2011 Tire size: 315/80 R22.5 Front axle: Steerable; Tire tread depth left: 6 mm; Tire tread depth right: 8 mm; Brakes: Disc brakes; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth left (inner): 10 mm; Tire tread depth left (outer): 13 mm; Tire tread depth right (inner): 12 mm; Tire tread depth right (outer): 11 mm Damage: none Prjdpj Agw Aasfx Abujc

Condition: used, mileage: 707,284 km, power: 338 kW (459.55 HP), first registration: 02/2018, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, power mirror, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler - Speed limiter - Particle filter - Alternating current - Central lubrication system = Further Information = Year of manufacture: 2018 Tire size: 315/70 R22.5 Predpe Agwz Isfx Abuec Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 6 mm; Suspension: Air suspension Unladen weight: 8,236 kg Payload: 10,764 kg GVW: 19,000 kg Damage: None

Condition: used, mileage: 950,456 km, power: 331 kW (450.03 HP), first registration: 07/2014, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 2, total length: 6,150 mm, total width: 2,550 mm, Equipment: electric window regulation, spoiler, = Additional options and accessories = - OptionCruise - Radio - Spoilers = More information = Psdpfx Abj Agwznouorc Year of construction: 2014 Cab: GigaSpace Front axle: Steering Rear axle: Double wheels Empty weight: 8.044 kg Carrying capacity: 10.956 kg GVW: 19.000 kg

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1 h, load capacity: 45 kg, arm reach: 2,050 mm, number of axes: 6, This 6-axis ABB IRB 4600-45/2.05 robot arm was manufactured in 2020. It features a load capacity of 45 kg and a reach of 2.05 m, making it suitable for various automation tasks. The robot is equipped with a Single Cabinet Controller (IRC5) and includes advanced safety features. If you are looking to get high-quality automation capabilities, consider the ABB IRB 4600-45/2.05 robot arm we have for sale. Contact us for further details. Pedo Agwzkspfx Abuorc - Payload: 45 kg- Reach: 2.05 m- Number of Axes: 6- Protection Rating: Standard- Color: ABB Graphite White std (209-202)- Manipulator Net Weight: 425 kg- Controller Net Weight: 150 kg- Operating Voltage: 3x 400 V AC, 50-60 Hz- Rated Current: 13 A- Short-Circuit Rating: 10 kA- Main Connection: Connector HAN HSB 6p+E (752-2)- Main Switch: Rotary switch (742-1)- Service Socket: 230 V (736-1)- Operating Ambient Temperature: Up to max. 45 °C (708-1)- Manipulator Cable Length: 7 m (210-2)- Teach Pendant: FlexPendant with 10 m connection cable (701-1)- Operating System / Firmware: RobotWare 6 (Boot Application 6.10.02.00) Software Options Installed: * 888-2 ProfiNet I/O Master/Slave Software * 996-1 Safety Module * 997-1 PROFIsafe F-Device * 1125-2 SafeMove Pro * 608-1 World Zones * 611-1 Path Recovery * 616-1 PC Interface * 617-1 FlexPendant Interface * 623-1 Multitasking * 689-1 External Guided Motion * 824-1 MultiFunction * 641-1 RobotWare Dispense- Interfaces & I/O Modules: * 803-2 User interface (parallel, EtherNet, and air) * 431-1 Mating connector for customer signal interface * 239-1 Mating connector kit at robot base * 970-1 RS232 serial interface * 1541-1 Digital I/O base module (16 In / 16 Out) * 731-1 Internal safety signals- Included Base Plates & Mounting Sets: * Base plate Type A (IRB2600/4600) height H=60 mm * Robot mounting kit for IRB4600 * Fastening kit GP Type C + SO Type C+G- Calibration Offset Data (Axis Resolver Values): * Axis 1: 3.9506 * Axis 2: 5.4462 * Axis 3: 5.6400 * Axis 4: 0.5636 * Axis 5: 1.2936 * Axis 6: 2.8601

Condition: used, mileage: 900,000 km, power: 338 kW (459.55 HP), first registration: 06/2019, fuel type: diesel, tire size: 315/70R22.5, tire condition: 50 %, axle configuration: 6x2, wheelbase: 5,000 mm, fuel: diesel, fuel tank capacity: 750 l, color: blue, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 10,230 mm, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, cruise control, parking heater, = Additional options and accessories = - Radio/CD = Additional information = General information Year of manufacture: 2019 Cab: HighCab Technical information Number of cylinders: 6 Axle configuration Front axle: Tire size: 315/70R22.5; Tire tread: 50%; Reduction: single reduction; Suspension: parabolic suspension Rear axle 1: Tire size: 315/70R22.5; Tire tread: 40%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tire size: 285/70R19.5; Tire tread: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 9,922 kg Payload: 16,078 kg GVW: 26,000 kg Functional Body brand: OTHER Layout Number of berths: 2 Condition Damage: none = Company information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands Prede Agwzgjpfx Abuec - Phone: - Email: - Website:

Condition: good (used), functionality: fully functional, power: 17 kW (23.11 HP), fuel type: diesel, empty load weight: 2,920 kg, Year of construction: 2016, operating hours: 4,046 h, Equipment: cabin, gripper hydraulics, hammer hydraulics, Mini excavator TEREX TC 29 (identical to Schaeff) Year of manufacture: 2016 According to the meter: 4,046 hours 2,920 kg 17.5 kW - Quick coupler MS 03 - All hoses - Hydraulic ditching bucket - Deep excavation bucket - Cabin with heating - Work lights - Immobilizer - Central lubrication system - Ready for immediate use - Good tracks - Well-maintained machine Podpfxj Agwy Ue Abuorc - Includes CE certificate and all other documents Selling price: €17,500 net Affordable delivery also possible!