Used Fermec 860 for sale (640)

Condition: excellent (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Ljdpez Ndwpsfx Ah Sjru Video available upon request.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 620, table width: 560 mm, table length: 910 mm, overall weight: 4,500 kg, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, Manufacturer: Wemas Model: VZ860Star Year of manufacture: 2009 Control system: Heidenhain 620 Travel distances XYZ: 860/600/650 Tool changer: 24 positions Spindle speed: 9,000 RPM Weight: approx. 4,500 kg Lsdpsz R Amkofx Ah Sjru Tool holder: SK40 Sale is only to commercial businesses, without warranty or guarantee. Free on board (FOB).

Condition: used, machine/vehicle number: 516221X00500, Year of construction: 2020, operating hours: 7,736 h, load capacity: 1,600 kg, lifting height: 5,000 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 5,000 mm Fork carriage adjuster: 300–860 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery voltage: 48 V Battery capacity: 625 Ah Battery idle voltage: 50.9 V Service valid until: 06/2027 Lrjdsz Nwa Aspfx Ah Sju UVV inspection valid until: 06/2027 Dimensions & Weight Dimensions (L x W x H): 3,300 x 1,150 x 2,150 mm Machine weight: 3,300 kg Operating hours: 7,736 h EQUIPMENT Semi-cabin Windshield wiper LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Previously a Still full-service unit Hydraulic functions: 3rd + 4th valve Side shifter All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 144

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Lrodpfjz H I Dlsx Ah Sju Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, controller model: RÖDERS RMS 6 Version 4.20, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Control system: RÖDERS RMS 6 Version 4.20 Travel range, X-axis: 760 mm Travel range, Y-axis: 550 mm Travel range, Z-axis: 300 mm Table dimensions: 860 x 550 mm Max. workpiece weight: 800 kg Feed rate: 0 to 30,000 mm/min Positioning accuracy: 0.005 mm Spindle speed: 42,000 RPM MACHINE DETAILS Control system: RÖDERS RMS 6 Version 4.20 Dimensions & Weight Dimensions (L x W x H): 5,000 x 3,000 x 2,700 mm Weight: 7,000 kg EQUIPMENT Ledpjz Iludsfx Ah Sjru 2 EROWA clamping systems Additional suitable accessories Cooling system Extraction system Work bench with fixtures 3D measuring probe External reference: Alesco - Lot 62

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 860 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530 i, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 860 was manufactured in 2014. It features an internal coolant supply and is equipped with a Heidenhain TNC 530 i control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 860 vertical machining centre we have for sale. Contact us for further details. • With internal coolant supply • Condition: Very good / Fully operational • Control System: Heidenhain TNC 530 i Technical Specification Through-spindle Coolant Yes Lrjdpjzbu Iwefx Ah Sou

Condition: not inspected (used), Year of construction: 2009, operating hours: 12,500 h, overall weight: 2,500 kg, power: 22 kW (29.91 HP), Used shredding machine designed as a twin-shaft shredder blade 30 mm drive 22 KW we currently have 4 used machines in stock with control system and partly installation frame and hopper. Ledpfx Ajra A D Teh Seru

Condition: ready for operation (used), Year of construction: 2017, Brand: HSM Model: V-Press 1160 max Year of construction: 2017 Press force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Lrodpfx Ahs Aa Nxwo Seu Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: good (used), Year of construction: 2018, Distance between centres: 2300 mm Swing over bed: 860 mm Swing over cross slide: 438 mm Bed width: 510 mm Lrjdpfx Ahsy D I Nus Sju Spindle mount: A2-11 Spindle bore: 152 mm Spindle speed range: 8 - 680 rpm, 12 steps Motor power: 22 kW Tailstock quill diameter: 120 mm Tailstock quill travel: 165 mm Quill taper: MK6

Condition: used, total width: 2,100 mm, total height: 2,100 mm, Year of manufacture: 2000 Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 370 x 210 x 210 cm - Details: - └ Description: Various repairs are needed - Year: 2000 - CE marking present: Yes - Serial number: 30728 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Tool present: Yes - └ Spindle 5: - - Spindle type: Top - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Tool present: Yes - Max. planing width [mm]: 260 - Min. planing height [mm]: 0 - Max. planing height [mm]: 140 - Feed table length [mm]: 860 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 141 - Fuse [A]: 160 - Power [kW]: 65.0 - Transport dimensions: 3700mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Lsdpfxoz Tqzno Ah Ssru VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 600 mm, cutting width (max.): 510 mm, control type: CNC control, Equipment: documentation/manual, lighting, BT65 touchscreen control panel Motorized duplex brushing system 5.5 kW drive motor Lrodpfx Ahj Adufws Sju Centralized lubrication system Deviation control Operator platform (work surface height -150 mm) 600 mm 1,270 mm 510 mm 10 to 110 m/min Ball screw CNC measuring device, cutting width 5 to 510 mm Linear laser Spraying gun Chip conveyor (scrapers), height 1,200 mm Stainless steel collection tray with grating Electrical cabinet air conditioning Hydraulic oil heater Electrical cabinet pre-heating with thermostat Light column Lubricant flow control

Condition: used, functionality: fully functional, Year of construction: 1993, operating hours: 8,906 h, load capacity: 8,000 kg, lifting height: 5,510 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 3,500 mm, fork length: 1,600 mm, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Triplex Lrsdpfjz Sv Nbjx Ah Sou Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Rear tire type: Pneumatic Description: Side shifter, fork positioner, height-adjustable forks, fork extensions 2400 mm 3rd valve, 4th valve, rear work light, front work light, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cabin, full free lift, LED.

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Lrjdpfx Aez Rmg Uoh Ssu Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Lodjra Rbgepfx Ah Sjru Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: used, Year of construction: 2023, Circular saw Lrodpsz U Hh Tjfx Ah Ssu Manufacturer: Martin Type: T65 Year of manufacture: 2023 Operating hours: approx. 58 h Table: 860 x 1,370 mm Sliding table length: 3,300 mm Cutting width: 1,350 mm Power: 5.5 kW Speeds: 2,800 / 4,000 / 5,000 rpm Cutting height: max. 204 mm Saw blade diameter: max. 550 mm Cutting width adjustment: Manual, digital display Height and angle adjustment: Electric The machine table has some surface rust.

Condition: used, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, General information Year of manufacture: 2012 Drivetrain Drive: Wheel Weights Empty weight: 16.892 kg Functional Lifting capacity: 230 kg Working height: 2.810 cm Dimensions of cargo space: 980 x 249 x 318 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Lrodpewc Snfjfx Ah Sou Other information Delivery terms: EXW Max. horizontal reach: 2610 m Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 860SJ Year of build: 2012 Condition: Used Data: Max. working height: 28,10 m Platform height: 26,10 m Max. reach: 23,40 m Platform lifting capacity: 230kg Platform dimensions LxW: 2,44 x 0,91 m Swivel range: endless Max. climbing capacity: 45% Total dimensions LxWxH: 12,30x 2,49 x 3,04 m Transport dimensions LxWxH: 9,80 x 2,49 x 3,18 m Movable up to working height: 28,10 m Wheel pressure max.: 82kN Ground clearance: 0,30 m Drive type: Diesel Own weight: 16.892 kg Special features: Rotatable work basket basket arm/vertical rotation angle +70°/-60° four-wheel drive pendulum axle

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 0i-MF Plus, spindle speed (max.): 15,000 rpm, Machining center with RoboJob Mill Assist automation, year of manufacture 2025! TECHNICAL DETAILS Travel Range X-axis travel: 860 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Table Table size: 950 x 550 mm Maximum load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Spindle nose to table surface: 150 - 700 mm Linear Guides & Speeds Linear guides: Ball guideways X/Y, roller guideway Z Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 - 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine Magazine positions: 30 System: random-access Maximum tool diameter: 75 mm Maximum tool diameter with adjacent slots free: 150 mm (for 40 tools: 130 mm) Maximum tool length: 300 mm Maximum tool weight: 7 kg Spindle Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW Speed: 15,000 rpm MACHINE DETAILS Controller: Fanuc 0i-MF Plus Lsdpfx Aoxz A Udjh Soru Dimensions & Weight Machine dimensions (W x D x H): 2,260 x 2,900 x 2,775 mm Required floor space (W x D x H): 3,160 x 3,000 x 3,000 mm Machine weight: approx. 5,400 kg Coolant, Chip, and Compressed Air Management Coolant system: 300-liter tank and pumps Chip evacuation: chip spirals right and left in the machine bed Compressed air connection: at the spindle (M32/M33) Compressed air through the spindle: (M38/M39) Compressed air and coolant gun Electrical and Pneumatic Requirements Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar EQUIPMENT Prepared for fourth axis (FANUC control), incl. wiring and Harting connector (without axis driver) Bed flushing system Integrated coolant pump with 20 bar pressure Belt-type chip conveyor incl. chip trolley RENISHAW OMP-60 probe with infrared transmission RENISHAW NC4+ tool laser measurement system and tool breakage monitoring Auto-door (side door) Pneumatic interface for workpiece clamping RoboJob Mill Assist 25kg, year of manufacture 2025 Full enclosure with double gripper

Year of construction: 2009, condition: refurbished (used), This floor standing unit is designed to help you create fruit coulis and purées, vegetable mousses, sauce bases, bisques and fish soups by separating pips, stones, fibres and carcasses without crushing them. The continuous feed system makes it easy to use and a great time saver. Hopper : Continuous feeding of prepared ingredients for increased productivity. Perforated basket :Your products fall inside the basket where they are strained. End product ejection chute:The ready to use pulp is ejected here and is free of pips, stones, skin, fibres and bones. Waste ejection chute: skins, pips, stones, tails, bones, shells, fibres… Paddles: Paddle assembly rotating at 1500 rpm to extract maximum pulp and juice. Lrjdpfx Ajz R Id Ish Sju Production of Pulp: 120 kg per hour Electrics: Single Phase 900 W Rpm: 1500 Dimensions: 1 030 x 400 x 860 Weight: 45kg Available: 1 week for Preparation

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 7001203, turning diameter over cross slide: 438 mm, spindle bore: 152 mm, turning diameter over bed slide: 860 mm, center width: 2,300 mm, spindle speed (max.): 680 rpm, bed width: 510 mm, TECHNICAL DETAILS Centre distance: 2,300 mm Lsdpfx Ahsy Edw Rs Soru Swing diameter over bed: 860 mm Swing diameter over cross slide: 438 mm Bed width: 510 mm Spindle mounting: A2-11 Spindle bore: 152 mm Spindle speed range: 8 - 680 rpm Number of speeds: 12 Tailstock quill diameter: 120 mm Tailstock quill travel: 165 mm Quill taper: MT6 MACHINE DETAILS Motor power: 22 kW

Condition: good (used), mileage: 102,342 km, power: 85 kW (115.57 HP), first registration: 07/2009, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro4, suspension: steel, number of seats: 3, total length: 5,700 mm, total width: 2,100 mm, total height: 2,650 mm, loading space length: 3,070 mm, loading space width: 2,030 mm, loading space height: 400 mm, Equipment: ABS, central locking, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric = Notes = Configuration: 4x2, Payload: 860 kg, Unladen weight: 2440 kg, Gross vehicle weight: 3300 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 3300 kg, Tow hitch, Type of cabin: Single cab, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Color: Yellow, Heated mirrors, Type of lighting: Halogen lamp, Engine power: 85 kW (114 Hp), Number of cylinders: 4, Engine capacity: 2287 cc, Fuel: Diesel, Euro: 4, Drive technology: Timing belt, Type of transmission: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Number of sides: 3 sides, Roof rack: None, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, tipper 3-way, Spare wheel, Tire type: All-season tires = Additional Information = Lredo Ad Uqyspfx Ah Sou Axle configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Weights Unladen weight: 2,440 kg Payload: 860 kg GVW: 3,300 kg Functional Height of loading area: 95 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Identification License plate: 7-VDP-13 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: new, Year of construction: 2021, functionality: fully functional, In-stock machine "NEW" - available for immediate delivery! (Subject to prior sale) Control system: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Load capacity: 800 kg Width of T-slots: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel ranges: Travel distances X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y-axis Roller guides in Z-axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-type) / changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct spindle drive Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around the spindle Chip conveyors on the right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other: Swiveling control panel Electronic handwheel (wired) Centralized lubrication oil / air Full enclosure Work light Heat exchanger on the control cabinet Auto-Power OFF function Hand tool set Signal light Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic inlet pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (including chip conveyor, discharge to the left) Machine weight: approx. 5,400 kg (net) Existing special equipment: Spindle: - Direct drive spindle SK-40, 15,000 min-1 - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Lrodpfx Ahoifn N Ns Ssu Tool magazine / changer: - Tool drum magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis drive Coolant, chip, and compressed air management: - Bed flushing - IKZ coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip cart (chip removal to the front, left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 measuring probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measuring system and tool breakage monitoring in the machine, incl. holder - Auto-Door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown in the picture with RoboJob Mill Assist 25kg (year of manufacture 2025 - NEW) - Full enclosure - Dual gripper available immediately

Condition: good (used), Year of construction: 2002, functionality: fully functional, Hurco VMX 64, Year of manufacture: 2002, Control system: Ultimax 4, Travel range X/Y/Z: 1625/860/760 mm, Tool changer: 40-position, Spindle speed: up to 8,000 rpm, High-pressure coolant system, Chip conveyor system, Pocket with islands, DXF, Simultaneous threading, Ultinet, Workpiece positioning detection, Lodpfx Ahjy T Iuvj Ssru Ramping/helix plunging, Advanced Velocity Control, Z-axis cover defective.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 160 mm, total width: 910 mm, total height: 115 mm, total length: 2,515 mm, conveying length: 2,500 mm, construction width: 910 mm, construction height: 115 mm, overall weight: 80 kg, Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 2,515 x 910 x 115 Width including side rail in mm: 900 Side rail height in mm: 75 Conveyor length in mm: 2,500 Conveyor width in mm: 860 Conveyor height in mm: 130 Roller pitch in mm: 160 Substructure: none Support roller axle type: steel, screw-in rollers Support roller diameter in mm: 50 Support rollers per axle: 1 Support roller material: steel Drive: gravity Lsdpfx Aheyufako Seru Net weight in kg: 80 Special features: 3-section feed/discharge Condition: used / fully functional Functional test: OK

Condition: used, functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, cutting angle (min.): 30 °, cutting angle (max.): 140 °, sheet thickness (max.): 4 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 870 kg, Equipment: CE marking, angle stop, documentation/manual, emergency stop, foot remote control, For sale is a robust and precise hydraulic notching machine from the quality manufacturer EUROMAC, model 220/4 S. The machine is characterized by its solid construction and the flexibly adjustable cutting angle (30° to 140°). It is ideal for efficient notching operations in sheet metal processing and metalworking. The machine has CE certification and was manufactured in 1995. Lrodpfx Ao Adzahoh Sju Technical data: • Manufacturer: EUROMAC (Italy) • Model: 220/4 S • Serial number: 12441095 • Year of manufacture: 1995 • Drive power: 3 kW (4 HP) / Three-phase motor • Max. cutting length: 220 mm • Max. cutting capacity (tensile strength R = 42 Kg/mm²): 4 mm (at 30° angle) • Max. cutting capacity (tensile strength R = 60 Kg/mm²): 3 mm (at 30° angle) • Stroke rate: • 70 strokes/min at 220 mm cutting length • 130 strokes/min at 50 mm cutting length • Table dimensions: 1000 x 790 mm • Working height: 900 mm • Oil capacity (central hydraulic system): 60 liters • Overall dimensions (L x W x H): approx. 1000 x 860 x 1200 mm • Machine weight (net): approx. 870 kg Includes a new set of blades.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Heidelberg Stahl SBP 86, year of manufacture 2005 Machine type: Stacker / Pressing stacker Manufacturer: Heidelberg / Stahl Model: SBP 86 Technical data Maximum product width: 860 mm Minimum size: 120 × 100 mm Maximum product thickness: 4 mm Maximum stack length: 800 mm Pressing force: 8,000 N Infeed height: 360–960 mm Power connection: 400 V Control system: MCT (model-dependent) Equipment and functions - Automatic stacker for folding machines - Pressing and bundling of folded printed sheets - Uniform and clean stack formation - Adjustable stack sizes - Suitable for processing leaflets, brochures, and folded sheets - Can be used behind Heidelberg Stahl folding machines Machine description: Lrodpfoz Rkb Aex Ah Sju Heidelberg Stahl SBP 86 stacker for the automatic transfer, pressing, and stacking of folded printed sheets. Suitable for use behind folding machines. Robust and reliable design for industrial use.