Schreinerei und Küchenwerkstatt
Schreinerei und Küchenwerkstatt from Schweinfurt
Möbelwerkstätte Deeg
Mr Philipp Deeg
Alois-Türk-Str. 10
97424 Schweinfurt
Germany
Bayern
Current offers from similar dealers
Listing
Nattheim
1,192 km
Carcase press
GannerConcept 70 Eco
GannerConcept 70 Eco
Call
Condition: used, Year of construction: 2024, Exhibition machine Garbsen, new, complete in standard configuration with:
- Sturdy, torsion-free steel frame, welded and bolted construction
- Upper lamella press beam with 6 elements, side lamella press beam with 5 elements
- Lamella press beams featuring proven tolerance compensation system (System Ganner) for tightly pressed carcass joints
- Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support panels
- Continuous pressing surface height of 95 mm on the lower vertical press beam
- Electromotive adjustment of both press beams via precision trapezoidal spindle screws (with increased pitch and concentricity accuracy) and high-performance recirculating nuts with grease reservoir
- Pressing is carried out electromotively, by 2 separate helical geared motors (2 x 0.75 kW)
- The pressing force of the press beams is infinitely electronically adjustable using two potentiometers and regulated via frequency converters; the pressing force control is therefore absolutely wear-free
Lodpfx Ahjxy Tl Do Uohr
- Pressing force for the horizontal press beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg)
- Pressing force for the vertical press beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg)
- Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second
- Extremely simple operation via 6 separate push buttons, 8 movement processes can be selected via the control system
- Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours)
- Working height/loading height: 300 mm
- Working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm
- Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A)
- Weight: 2100 kg (net)
- Dimensions: 3500x1200x2300 mm (L x W x H)
Image includes special accessories: machine feet. Surcharge for rapid traverse speed per unit for fast positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing special components.
Set of machine feet for working height 500 mm per unit.
Location: Garbsen
Listing
Bitburg
902 km
Carcase press
Ganner GannomatConcept 70
Ganner GannomatConcept 70
Call
Condition: refurbished (used), Year of construction: 2016, LAMELLA - CARCASE PRESS
GANNOMAT « CONCEPT 70 ECO »
Complete in standard configuration with:
- Sturdy, torsion-resistant frame made of steel in welded and bolted construction
- Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements
- Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints
- Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels
- Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam
- Electromotorical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir
- Pressing is carried out electrically via 2 separate worm gear motors (2 x 0.75 kW)
- The pressing force of the beams is infinitely electronically adjustable via 2 potentiometers and regulated by a frequency inverter, resulting in absolutely wear-free pressing force control
- Pressing force for horizontal pressing beam: min. 500 daN (kg) up to steplessly max. 2200 daN (kg)
Pressing force for vertical pressing beam: min. 300 daN (kg) up to steplessly max. 2200 daN (kg)
Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second
Lhjdpexvitijfx Ah Uer
Very easy operation
- Working height/loading height: 300 mm
- Working dimensions: length min: 150 mm, max: 2500 mm
height min: 150 mm, max: 1400 mm
depth: 700 mm
Machine No. 563.624
400V, 3Ph, 50Hz (3.2 kVA, 16 A)
Set of machine feet for 500 mm working height
Operating manual in German language
Completely overhauled by Ganner, 6 months parts warranty
Location: Ex stock 54634 Bitburg
- immediately available -
Listing
Landshut
1,307 km
Carcase press
Ganner260
Ganner260
Call
Condition: used, Year of construction: 1989, Working dimensions 3000 x 1250 x 650 mm
Cylinder stroke 110 mm
Machine dimensions 3240 x 2120 x 770 mm
Ljdpfx Aoxu Egvjh Ujhr
Weight approx. 900 kg
Listing
Gerolzhofen
1,110 km
Carcase clamp
HESSExpress
HESSExpress
Call
Condition: used, Year of construction: 1993, used, in excellent condition
Brand: Hess
Model: Express
Year of manufacture: 1993
Machine no.: 100914/28
Cylinders per press element: 2 - 110 mm stroke
Number of press elements horizontal: 3
Number of press elements vertical: 3
Working width: 2500 mm
Working height: 1350 mm
Press depth: 600 mm
Pneumatic
Height adjustment: electric
Space requirement approx. 3600 x 800 x 2450 mm
Lhodpjxuv N Uofx Ah Usr
Weight approx. 1200 kg
Location: 97447 Gerolzhofen, loaded free on truck, unpacked
Delivery in current condition as inspected,
without warranty or guarantee
Auction
Auction ended
Saarland
1,001 km
Carcase press
HÖFERKoptronik
HÖFERKoptronik
Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 941, working height: 1,350 mm, working width: 600 mm, working length: 2,500 mm, TECHNICAL DETAILS
Pressing length: max. 2,500 mm
Lsdpoxnyg Rjfx Ah Uohr
Pressing height: max. 1,350 mm
Working depth: max. 600 mm
MACHINE DETAILS
Electrical data
Rated voltage: 3/N/PE/400 V
Rated current: 11 A
Rated power: 4.7 kW
Frequency: 50 Hz
EQUIPMENT
Vertical and horizontal press beams operated electromechanically
Pressure build-up via frequency-controlled geared motors
Vertical and horizontal press pressure adjustable separately
Pressing time adjustable
Listing
Willroth
908 km
Carcase press
GANNOMATConcept 70 Eco
GANNOMATConcept 70 Eco
Call
Condition: good (used), Year of construction: 2014, Used carcass press
- GANNOMAT Concept 70 Eco
Ljdjxhc T Tspfx Ah Ushr
- Year of manufacture: 2014
- Available December 2025
Listing
Bitburg
902 km
Carcase press
HessExport
HessExport
Call
Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic
Manufacturer: Hess
Type: Export
Ljdpfxsxgvwpe Ah Ujhr
Maximum workpiece size: 2,500 x 1,500 mm
Press force: 1,400 kp pressing capacity per pressure unit at 15 bar
Vertical cylinders: 2 + 2 pressure cylinders
Horizontal cylinders: 2 + 2 pressure cylinders
Dimensions: 3,900 mm x 2,500 mm x 600 mm
Weight: 1,060 kg
Hess Corpus Press Export, pneumatic
2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar
2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation
Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release
Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator
Anodized measuring scales, detachable feet
Location: Ex works customer site
- Immediately available -
Listing
Geretsried
1,321 km
Carcase press
LIGMATECHOPTIMAT MPH 10
LIGMATECHOPTIMAT MPH 10
Call
Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: LGMATECH KORPUSSPRESSE, Body press in immediately operational condition. The press can be inspected at any time by appointment.
Lhsdpfx Aexf Dvwoh Ujr
Listing
Nattheim
1,192 km
Frame press
MawegJumbo
MawegJumbo
Call
Condition: used, Year of construction: 1982, Press dimensions: 3500 x 2600 mm Electrohydraulic unit for 4 hinge cup drillings, complete, 4 hinge cup drilling units Left upper corner plate with 2 cross pressure cylinders 4x hydraulic wood holders Intermediate inserts for small pressing with drilling unit Central pressure beam 2600 mm Longitudinal pressure cylinder with counterholder 4x hinge cup drills Storage location: At customer site
Lhedpexftcajfx Ah Uor
Listing
Bitburg
902 km
Carcase press
Gannomat / GannerConcept 70 Eco sofort verfügbar
Gannomat / GannerConcept 70 Eco sofort verfügbar
Call
Condition: excellent (used), Year of construction: 2016, LAMELLA – CASE CLAMP PRESS
GANNOMAT “CONCEPT 70 ECO”
Complete in standard configuration including:
- Sturdy, torsion-resistant steel frame, constructed with welded and bolted assemblies
- UPPER lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements
- Lamella pressure beams feature the tried-and-tested tolerance compensation system (Ganner system) for tightly pressed carcass joints
- Counter-pressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates
- Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam
- Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir
- Clamping is electromotor-driven, with two separate worm gear motors (2 x 0.75 kW)
- The pressing force of the pressure beams is continuously adjustable electronically using two potentiometers and regulated via frequency inverters, providing a completely wear-free press force control
- Pressing force for horizontal beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg)
Pressing force for vertical beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg)
- Press and adjustment speeds of the pressure beams with fine positioning, switchable via 3-stage selector: 5 / 10 / 25 mm/sec
- Extremely user-friendly operation
- Working height/loading height: 300 mm
- Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm
- Machine No. 563.624
Lhodpfxjw Td A Ie Ah Usr
- 400V, 3Ph, 50Hz (3.2 kVA, 16 A)
Set of machine feet for 500 mm working height
Operating manual in German
Overhauled by Ganner, with 6-month parts warranty
Location: ex stock 54634 Bitburg
- Immediately available -
Listing
Bitburg
902 km
Carcase press
Gannomat / GannerConcept 70 Eco
Gannomat / GannerConcept 70 Eco
Call
Condition: excellent (used), Year of construction: 2013, LAMELLAR - CASE CLAMP
Lhodpfew Tdymjx Ah Uor
GANNOMAT "CONCEPT 70 ECO"
Complete in standard configuration with:
Case joints.
- Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates
- Electrically operated adjustment of both press beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir.
- Clamping is performed electrically using two separate worm gear motors (2 x 0.75 kW)
- Pressing force: 2000 daN (kg) per press beam.
- The pressing force of the press beam is electronically regulated and set via frequency converter, thus torque transmission is completely wear-free.
- Pressing and adjustment speed: 25 mm/sec.
- Very simple operation via 6 separate push buttons; 6 movement operations can be selected via the controller.
- Freely adjustable pressing time preselection with automatic opening: 0-30 min (switchable to seconds or hours).
- Working height/feeding height: 300 mm
- Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm.
Depth: 700 mm
1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg)
Machine No. 380.324
400V, 3Ph, 50Hz (2.5 kVA, 16 A)
Set of machine feet for working height 500 mm
Machine used:
Year of construction: 2013, fully overhauled by Ganner, 6-month parts warranty
Special price: ex-stock 54634 Bitburg
- immediately available -
Listing
Marano Vicentino
1,501 km
Carcase press
RAMARCHPN30
RAMARCHPN30
Call
Condition: excellent (used), Year of construction: 1995, Pneumatic clamp for furniture. Usable dimensions: 3000x1200 mm. Motorized lifting of the upper bar. Tested and working.
Ljdew S A Erepfx Ah Ushr
Listing
Bitburg
902 km
Carcase press
GannomatConcept 70 Easy
GannomatConcept 70 Easy
Call
Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP
Lhjdjw Sgnkjpfx Ah Usr
GANNOMAT "CONCEPT 70 EASY 170"
Fully equipped in standard configuration with:
- Sturdy, torsion-resistant steel frame made with welded and bolted construction
- Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate
- Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates
- Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir
- Pressing is performed by electromotor via worm gear motor (0.75 kW)
- The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control
- Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg)
- Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second
- Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc.
- Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller
- Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams
- Re-pressing function to increase or decrease the pressing force during the pressing process
- Working height/loading height: 200 mm
- Working dimensions:
Length min: 150 mm, max: 1300 mm
Height min: 150 mm, max: 1700 mm
Depth: 700 mm
Electrical connection: 400 Volt, 50 Hz, 16 A
Available: at short notice
Listing
Wijchen
725 km
Case Presses Ramarch PN-28 1999
RamarchPN-28
RamarchPN-28
Call
Condition: used, Year of construction: 1999, total height: 2,200 mm, total length: 5,200 mm, total width: 800 mm, Empty weight: 950 kg
- Year: 1999
- Documentation available: No
- CE certificate present: No
- Serial number: 13301
- Press drive: Pneumatic
- Max. workpiece width [mm]: 4500
- Max. workpiece height [mm]: 1550
- Max. workpiece depth [mm]: 600
- Vertical pressing rams [pcs]: 3
- Horizontal pressing rams [pcs]: 4
- Transport dimensions: 5200mm x 800mm x 2200mm (l x w x h)
- Transport weight [kg]: 950kg
- Transport packages [pcs.]: 1
Financial information
Lhsdpowyn Najfx Ah Ujr
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Delivery and trade-in always possible for everything in the industrial sectors
Yorick Diebels
Listing
Seehausen am Staffelsee
1,321 km
Carcase press
GannomatConcept 70 Easy 170
GannomatConcept 70 Easy 170
Call
Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Complete in standard design with:
- Sturdy, torsion-free steel frame, of welded and bolted construction
- PRESS BEAMS LATERALLY with continuous pressure surface and 25 mm thick, coated bearing plate
- Counter-pressure surfaces (lateral pressure wall, base) are 25 mm thick, coated, continuous bearing plates
- Electric adjustment of the press beam via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance lead nuts with grease reservoir
- Pressing is performed electromechanically using a worm gear motor (0.75 kW)
- The pressing force of the press beam is continuously adjustable electronically by potentiometer and regulated by a frequency inverter, offering absolutely wear-free pressure force control
- Pressing force for the vertical press beam min. 300 daN (kg) to infinitely variable max. 2200 daN (kg)
Ledpfx Aewx Nfgoh Ujhr
- Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch 5 / 10 / 25 mm/second
- Extremely simple operation via two separate push buttons; two movement cycles (open/close) selectable via control
- Freely adjustable pressing time pre-selection with automatic opening, 0–30 min. (switchable to seconds or hours)
- Working height/loading height 200 mm
- Working dimensions:
Length min: 150 mm, max: 1300 mm
Height min: 150 mm, max: 1700 mm
Depth: 700 mm
Electrical connection: 400V, 3Ph, 50Hz
(1.6 kVA, 16 A)
Listing
Barntrup
910 km
Thickness Planers
DornburgDD63
DornburgDD63
Call
Condition: excellent (used), functionality: fully functional, planing width: 630 mm, height adjustment type: mechanical, overall weight: 1,100 kg, planing height: 200 mm, working width: 630 mm, rotational speed (max.): 5,500 rpm, Thickness planer Dornburg, model DD 63. Robust thickness planer (cast iron), table length approx. 1050 mm. Planing width approx. 630 mm, maximum clearance height 200 mm. Cutterhead equipped with 4 strip knives. Motor 5.5 kW, speed 5500 rpm. Feed rate 18 m/min. Dimensions approx. 1100 x 1300 x 1600 mm (LxWxH). Weight approx. 1100 kg.
Lhodpfxewtqzre Ah Ujr
Listing
Juszczyn
1,680 km
Press for casings
ItalpresseProgram/30
ItalpresseProgram/30
Call
Condition: excellent (used), Hydraulic assembly press Italprasse Program/30 for door and window joinery
The Italpresse Program/30 machine is a hydraulic vertical press designed for precise assembly and gluing of wooden elements, such as window and door frames and furniture bodies. Thanks to its design, it allows for precise fitting and permanent connection of components, which is crucial in the production of door and furniture joinery.
Technical specifications
•Maximum working dimensions: 3000 × 1700 mm
•Stroke of vertical cylinders: 800 mm
•Stroke of horizontal cylinders: 1200 mm
•Adjustable lower beam: can be set in three positions
•Hydraulic cylinders:
•2 vertical (Ø 100/60 mm)
•2 horizontal for setting frames (Ø 50/35 mm)
•Power of hydraulic unit: 2.2 kW
•Overall dimensions: 3600 × 1000 × 2650 mm
•Weight: approx. 1200 kg
Lsdpfxswkf Sts Ah Uehr
Application
Italpresse Program/30 is ideal for:
•Gluing and assembling window and door frames
•Assembling furniture bodies
•Assembling wooden panels and other construction joinery elements
Listing
Teisendorf
1,394 km
Carcase press
GannomatConcept 70 Eco
GannomatConcept 70 Eco
Call
Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Concept 70 Eco body press
Year of manufacture 2025
including the following options:
- Rapid traverse speed adjustment speed up to 50 mm/sec
- Machine feet (working height 500mm)
The Concept Eco and Concept Primus are ideal assembly aids for dowel connections when pressing bodies together, as well as when making drawers.
Brief introduction:
• With tried and tested tolerance compensation (GANNOMAT system)
• 2 potentiometers for continuously adjustable pressing force
• Pressing force min. 300/500 daN (kg) for Concept Eco or
Pressing force min. 600/800 daN (kg) for Concept Primus
• Pressing force max. 2200 daN (kg) for Concept Eco or
Pressing force max. 3500 daN (kg) for Concept Primus
• 3 pressing and adjustment speeds
5/10/25 mm/sec. (with fine positioning / creep speed)
• Freely adjustable pressing time pre-selection with automatic opening
• Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences
• Concept Primus: Simple operation via LCD display
Universal application area:
• Bodies e.g. for furniture and cabinets
• Mitered bodies
• Bodies with protruding lids
• Drawers
• Pressing several bodies / drawers
Advantages:
• Tried and tested tolerance compensation (GANNOMAT system)
• Electromechanical body press with frequency-controlled gear motors
• Independent vertical and horizontal press beam
• Long service life thanks to tried and tested, high-quality components
• Solid and robust construction
• Space-saving design
• Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional
• Simple thanks to simple and practical control panel
• Fast thanks to press beam positioning speed of up to 50 mm/sec (option)
• Efficient thanks to precise pressing of a wide variety of body sizes
• Flexible thanks to adjustable parameters such as e.g. Pressing force, pressing time, travel speeds
Lhedpfevxgrrox Ah Usr
• Precise through precise angle pressing of furniture bodies and drawers
• Professional production of bodies and drawers using modern body presses
Listing
Cantù
1,390 km
Carcase press
ITALPRESSENUOVO/SP
ITALPRESSENUOVO/SP
Call
Condition: good (used), Code: 0024
Brand: ITALPRESSE
Model: NUOVO/SP
Quick setting semiautomatic case clamp
Technical data
Manual loading
Max useful dimensions mm 2500 x 600 x 1250
Min useful dimensions mm 250 x 600 x 280
Motorized horizontal cross-beam with display
Vertical beam setting
N° 6 vertical cylinders
N° 6 horizontal cylinders
Cylinders stroke mm 70
Cross-beam stroke mm 920
Installed power Kw 0,55
Lhjdpfx Aevv Ul Ush Uor
Overall dimensions mm 3600 x 800 x 2550 h
Weight kg 1400
Listing
Nattheim
1,192 km
Carcase press
MawegNA-15
MawegNA-15
Call
Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm
Storage location: Nattheim
Ledpfx Ahovvkl Dj Uohr
Listing
Borken
777 km
Carcass press Frame press Joining press
Hülsta WerkeNOW Easy
Hülsta WerkeNOW Easy
Call
Condition: good (used), ZIM Hülsta cabinet press NOW Easy
Make: ZIM Hülsta-Werke
Type: NOW Easy
Ser. no.: 380125028
Carcase max. 260 x 1100 mm
2 supports at the bottom, movable
2 press bars at top, movable
Beckoff control panel
Lhodovdbv Aepfx Ah Usr
Roller conveyor 4500 x 600 mm
Roller width: 500 mm
Overall dimensions: W x D x H 3300 x 1800 x 3600 mm
Further articles - new and used - can be found in our store!
International shipping costs on request!
Listing
Rodgau
1,021 km
Slat cabinet press
GannomatConcept 70-ECO
GannomatConcept 70-ECO
Call
Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A).
Lhedpfx Aouf Hx Heh Usr
Additional equipment:
Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm).
Storage location:
Listing
Tauberbischofsheim
1,091 km
Body press
Call
Condition: used, length: 2.300 mm
width: 800 mm
height: 2.700 mm
Workpiece size: 130 x 70 x 145 cm
Lsdpfx Ahet H Tuxe Uehr
Pneumatic carcass press or gluing press for pressing furniture carcasses or similar.
Listing
Raasdorf bei Wien
1,582 km
Carcase press
GannomatMod 260
GannomatMod 260
Call
Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Gannomat Mod. 260 carcass press
Clamping size 2500 x 1250 x 650 mm
Working pressure 0 - 10 bar
Cylinder stroke 110 mm
Space requirement 3240 x 2120 x770 mm
Weight 900 kg
Year of construction 2010
CE conform
The machine is still being refurbished and more pictures will follow shortly
Lhjdpfx Aerfbnbjh Uer
Listing
Malax
1,639 km
Carcass press throughput
OCMAC s.p.a. ItalyKOPR CC-EL
OCMAC s.p.a. ItalyKOPR CC-EL
Call
Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, total height: 2,600 mm, total length: 100,000 mm, total width: 1,000 mm, pressing force: 120 t, Ocmac automatic throughfeed carcass press KOPR CC-EL
Manufacturer OCMAC s.p.a. Italy ( acimall)
S/N 0243 / 25634
year of construction 1995
Hydraulic self-adjusting electronic carcase press
for the assembly of furniture.
Automatic feeding of the workpieces
Technical data:
Max. usable mass:
Length 2300mm
width 600mm
Height 1500mm
Min usable dimensions:
Length 500mm
Width 300mm
Height 200mm
Feed rate of the conveyor belt: 2,4-12M/min
Closing time of the press 20-40 seconds
Lhedpfx Aeqai H Toh Usr
Installed power 11.5 kW
Max pressure: 120 bar
Voltage: 380 V , 50 hz
Net weight 4500 kg

























































































































































































