Tworks Kft

Condition: used, Year of construction: 2004, x-travel 1300 mm y-travel 510 mm z-travel 570 mm max. workpiece weight 1200 kg spindle turning speed range 12000 U/min weight of the machine ca. 7,1 t Rbedpfxjyyc Svs Aaaow required space 5,00 x 3,20 x 3,00 m

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,645 mm, travel distance Y-axis: 1,760 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D s, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis MAKA DC 3 was manufactured in 2016. It features a spindle speed range of 18,000 rpm and impressive axis travels of 1645 mm in the X-axis, 1760 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a table size of 1200 x 1400 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the MAKA DC 3 vertical machining centre we have for sale. Contact us for further details. • Table size: 1200 × 1400 mm Technical Specification Taper Size SK 40 Rbsdpjyycdlofx Aaaew

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Rjdpfx Asyybpmeaajbw Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: excellent (used), Hurco VMX50i (2014) 3-Axis Vertical Machining Centre Rbodpfx Aoyx H Rtsaaew Control: Hurco WinMax Travels & Capacity X Axis Travel: 1270 mm Y Axis Travel: 660 mm Z Axis Travel: 610 mm Table Size: 1500 x 660 mm Max Table Load: 2000 kg

Condition: excellent (used), Year of construction: 2004, operating hours: 7,500 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 515 mm, controller model: HEIDENHAIN 530, table width: 600 mm, table length: 1,370 mm, table load: 900 kg, rotational speed (max.): 8,000 rpm, operating hours of spindle: 7,500 h, Equipment: documentation/manual, For sale: Hartford CNC machining center from 2004, machine condition rated as very good. The machine is rigid with a large working range and offers high precision. Available under power until 15.04; for sale due to logistical reasons. The machine operates on three axes (X, Y, Z) with maximum travels of 1270 mm (X-axis), 635 mm (Y-axis), and 515 mm (Z-axis). The milling center is controlled via a Heidenhain CNC controller. The worktable dimensions are 1370 x 600 mm (length x width), suitable for machining workpieces up to 950 kg. The machining center is equipped with a spindle speed of approximately 8,000 rpm and features an automatic tool changer with a 20-tool magazine. The total weight of the CNC milling machine is 7,000 kg. Rbodpoyx Dcgjfx Aaasw Technical data - HARTFORD VMC 1270 S machining center: - CNC control: Heidenhain 530 - Table working area (L x W): 1370 x 600 mm - Maximum table load: 950 kg - Maximum travel (X/Y/Z): 1270/635/515 mm - Rapid traverse (X/Y/Z): 20/20/20 m/min - Spindle speed: approx. 8,000 rpm - Automatic tool changer - Magazine capacity: 20 tools The machine is connected and available for inspection/testing. Only 7,500 operating hours.

Condition: used, AWEA BM-1400 is a 4-axis machining center designed for precision, high accuracy and reliability. Table 1500×800 mm; travels X1400 mm, Y800 mm, Z700 mm. Spindle nose ISO 40, 0–12000 t/min (stepless), supply 50Hz 3x400V, total power 40 kVA; weight ≈12000 kg; size L4800×W2850×H3100 mm. Accessories: set of toolholders, high pressure coolant 40 bar, chip conveyor, dividing attachment 4th axis, electronic handwheel, RS‑232 interface, status light. Achieves tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Rbsdpfx Aaoyxn E Ejasw

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,459 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 18i, number of axes: 4, This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details. • Quantity: 2 machines (offered together) • Price: 30,000 € for both machines • 4th axis: Yes, mounted • Tool magazine: 30 stations Additional equipment • Chip conveyor • Band filter Rjdpfx Aajyxnmveaobw • Automation: Lang Eco Compact 10 (fully functional) • Tool holder package SK40 • 10 vices • Custom-made wooden floor grating for ergonomic loading Technical Specification Taper Size SK 40

Condition: used, Table: 1200 x 540 mm X Axis: 1020 mm / Y Axis: 540 mm / Z Axis: 530 mm Z Clearance: 150 ~ 680 mm Table Load Capacity: 1000 kg Spindle: 8000 rpm Rjdpeyxnk Iefx Aaaebw Spindle: ISO 40 / 15/11 kW Automatic Tool Changer: BT40 Tool Holder / 30 Tools Machine Weight: 7,000 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 426 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 1,250 mm Travel Range Y-axis: 880 mm Travel Range Z-axis: 800 mm Main Spindle Max. Speed Range: 12,000 rpm Drive Power: 15 / 10 kW Max. Torque: 500 Nm Tool Holder: SK 40 Work Table Clamping Surface: 1,500 x 1,050 mm Max. Table Load: 2,500 kg Number of T-slots: 10 T-slot Width: 18 H7 mm T-slot Pitch: 100 mm Tool Changer Number of Tool Stations: 30 Max. Tool Diameter: 80 mm Max. Tool Diameter with Empty Adjacent Pocket: 160 mm Max. Tool Length: 315 mm Max. Tool Weight: 8 kg Max. Total Weight: 100 kg Feeds Rapid Traverse (X / Y / Z axis): 15 m/min Feed Rate: 10,000 mm/min MACHINE DETAILS Rbodpjyxmmnsfx Aaaow Control Model: TNC 430 Heidenhain Total Power Requirement: 29 kW Dimensions & Weight Space Requirement: approx. 7.0 x 5.0 x 3.3 m Machine Weight: approx. 16.0 t EQUIPMENT Documentation Chip Conveyor Coolant System High-Pressure Coolant Measuring Probe (Manufacturer: Heidenhain) Internal Coolant Supply Note: The transport rigging must be arranged by the buyer!

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 430 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm Main spindle Max. speed range: 12,000 rpm Drive power: 15 / 10 kW Max. torque: 500 Nm Tool holder: SK 40 Work table Clamping area: 1,500 x 1,050 mm Max. table load: 2,500 kg Number of T-slots: 10 T-slot width: 18 H7 mm T-slot spacing: 100 mm Tool changer Number of tool stations: 60 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Max. total weight: 100 kg Feeds Rapid traverse (X / Y / Z-axis): 15 m/min Feed rate: 10,000 mm/min MACHINE DETAILS Control model: TNC 430 Heidenhain Total power requirement: 29 kW Rodpfoyxmd Tsx Aaaobw Dimensions & Weight Space requirements: approx. 7.0 x 5.0 x 3.3 m Machine weight: approx. 16.0 t EQUIPMENT Documentation Chip conveyor Coolant system Tool changer Note: Transport tackle must be organized by the buyer!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,400 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,880 mm, total width: 3,680 mm, table load: 1,800 kg, overall weight: 9,100 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of axes: 3, This 3-axis Quaser MV-204 CP vertical machining centre was manufactured in 2007. It features a working area with X-axis travel of 1200 mm, Y-axis travel of 700 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1400 x 700 mm and a maximum table load capacity of 1800 kg. If you are looking to get high-quality milling capabilities, consider the Quaser MV-204 CP machine we have for sale. Contact us for further details. • Machine table: 1400 x 700 mm • T-slots: 6; width 18 mm; spacing 100 mm • Distance table to spindle nose: 150–760 mm • Spindle type: WEISS WB-40R • Spindle torque: 192 Nm • Tool changer: 30 positions • Utilities: compressed air 6 bar; voltage 400 V; mains fuse 63 A; connection cable cross-section 4 x 16 mm² • Usage/condition notes: Rbodjyw S Dispfx Aaajw • Spindle collision in 2018; spindle functions for plastics, but spindle condition should be assessed • Machine out of operation for approximately 6 months due to new purchase • Spindle hours: 8,400 Additional equipment • Coolant system with 600-liter tank • Chip conveyor • Heidenhain handwheel HR410 • Various milling chucks • Haimer shrink-fit chuck • Slimline base holder for DuoBlock • Various collet base holders (without collets) • Albrecht drill chuck • Haimer dial gauge • Complete machine documentation Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Rbodsyw Nbrspfx Aaasw Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 40, This 5-axis LGB KX45 SQUARE FIVE 2 vertical machining centre was manufactured in 2012. It features a moving table of 1480 x 1440 mm, a Heidenhain ITNC 530 control, and a high-speed capability of 18,000 rpm with HSK 63A. Additional highlights include a chip conveyor, a Renishaw tool filler, 40 tool places, and an IKZ 40 bar with a cooling unit. For more information about this vertical machining centre, please reach out to us. Additional equipment • Electronic handwheel HR 420 • Renishaw tool filler Rbjdpfx Asywvrwsaajw • Cooling unit • MFE 28 filter unit • Laser tool measuring system Extra Information Machine still under power

Condition: new, Sale exclusively within Switzerland. X-axis travel: approx. 1500 mm Rbjdpfx Ajywtpaoaajw Y-axis travel: 740 mm Z-axis travel: 610 mm Distance from spindle nose to table center: 125 ~ 735 mm Table size (X-direction): approx. 1600 mm Table size (Y-direction): approx. 700 mm Table load capacity: approx. 1450 kg Spindle taper: BT 40 / BT 50 (optional) Spindle speed: Belt drive 10,000 rpm.

Condition: new, Sale exclusively within Switzerland. X-axis travel: 1400 mm Y-axis travel: 650 mm Z-axis travel: 610 mm Distance from spindle nose to table center: 125 ~ 735 mm Rbedpoywtncofx Aaaow Table size (X direction): approx. 1500 mm Table size (Y direction): 650 mm Table load capacity: 1000 kg Spindle taper: BT40 (BT50 optional) Spindle speed: Belt drive 10,000 rpm.

Condition: excellent (used), Year of construction: 2010, Control: Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Rbsdpfx Ajywpfwjaajw Table size: 1450 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle coolant 3D probing system

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain TNC 426 PB, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! Increased pressure to sell – exceptionally attractive offer! TECHNICAL DETAILS Travel X-axis: 1,200 mm Travel Y-axis: 800 mm Travel Z-axis: 400 mm Machine table: 1,280 x 830 mm Rsdpfx Aaeywgvtsajbw Number of T-slots: 3x 18 H10 Spindle speed: 9,000 rpm Spindle taper: SK40 Spindle power: 9 kW Spindle torque: 84 Nm Max. linear axis speed: up to 30 m/min Tool changer: 24 stations MACHINE DETAILS Control system: Heidenhain TNC 426 PB Connection data: 400 V / 50 Hz Connected load: 32 kVA Fuse protection: 3x 63 A Transport dimensions Dimensions (L x W x H): 2525 x 2440 x 2700 mm Weight: 8,500 kg + 3 additional EU pallet spaces, each 1200 x 800 x 2200 mm

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total width: 3,000 mm, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, product length (max.): 4,000 mm, number of axes: 3, This 3-axis FAGIMA FAST 160 was manufactured in 1999. It features an X-axis travel of 1600 mm, Y-axis travel of 700 mm, and Z-axis travel of 700 mm. The machine includes a table size of 1800 × 700 mm with a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the FAGIMA FAST 160 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1800 × 700 mm • Spindle: • Torque: 75 Nm • Feed rates: • Rapid X/Y/Z: 20,000 mm/min • Cutting feed: 1 – 10,000 mm/min • Tooling: • Tool changer: 38 positions Rsdpfjyv Df Njx Aaaobw Additional information: • Machine overhauled in 2016

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Heidenhain TNC 426, rotational speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 800 mm Spindle speed: 30–8,000 rpm Spindle taper: ISO 40 Table size: 1,250 x 630 mm Workpiece weight: 1,000 kg Tool changer: 24 positions MACHINE DETAILS CNC control: Heidenhain TNC 426 Dimensions & Weight Space requirements: approx. 4.2 x 3.3 x 3.15 m Redpfsyv Ayfox Aaaebw Machine weight: approx. 7,500 kg

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 850 mm, overall weight: 27,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis Rambaudi RF103 was manufactured in 2008. It features a maximum spindle speed of 18,000 rpm and a robust table size of 1,900 x 1,200 mm. The machine includes a tool changer with 24 positions, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Rambaudi RF103 vertical machining centre we have for sale. Contact us for further details. • Spindle: • Type: Electrospindle • Tool interface: HSK-A63 • High-pressure coolant: 20 bar • Electrospindle delivered at 0 hours • Table: • Type: Fixed • Size: 1,900 x 1,200 mm • Tooling: • Tool changer: 24 positions Rbsdpfxoyvt Sfe Aaaew

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC Machining Center Hedelius C60S -1200 Control: Heidenhain iTNC 530 Year of manufacture: 2016 Internal machine no.: 9 Travel paths: X-axis: 1,200 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area: 1,550 x 600 mm Table load: approx. 1,500 kg Spindle taper: SK 40 Tool magazine: 30 positions Spindle speed: 30 - 6,000 rpm Equipment: - KM500 sieve filter system Redpfx Aajyvp U Nsasbw - High-pressure pump - Chip conveyor - Machine enclosure - LTA extraction system

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Rbedpfx Aeyu Trheaasw Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2008, Johnford SV-41 (2008) – Technical Specifications Rodpeyu R N Refx Aaasbw Type: Vertical CNC Machining Center Control Unit: Fanuc CNC Control Year: 2008 Travels (X / Y / Z): approx. 1,020 / 510 / 610 mm Table Size: approx. 1,100 x 500 mm Max Table Load: approx. 600–800 kg Spindle Taper: BT40 Spindle Speed: up to 8,000 rpm Spindle Motor: approx. 11–15 kW Tool Magazine: 24 ATC (Automatic Tool Changer) Rapid Traverse: approx. 24–30 m/min Coolant System: Yes Chip Conveyor Machine is equipped with Fanuc control and is in good working condition.

Condition: good (used), Year of construction: 2011, In good technical condition and fully functional. Year of manufacture: 06/2011. Fanuc control system. Axis travel – X-axis 2400 mm, Y-axis 960 mm, and Z-axis 800 mm. Rodpfx Aeyu Nb Ssaaebw

Condition: good (used), Year of construction: 2008, Used milling machine by Style Model: BT 1500 Max RPM: 6000 Year of manufacture: 2008 4th axis Rbedpoyu Ifpefx Aaaew Spindle coolant