Sparkasse Leasing S, družba za financiranje d.o.o.

Year of construction: 1994, condition: excellent (used), Longitudinal Flow Dryer in Cabinet Design Internal chamber length approx. 4300 mm Internal chamber width approx. 750 mm Internal chamber height approx. 630 mm Chamber volume 2.3 m³ Side loading – cabinet version with loading trolley Vertical lift door, spring-assisted Manual / fully automatic control Electronic control MP 902 Longitudinal ventilation Fans: 1 unit Fan motor power 0.55 kW, 400 V, 50 Hz Heating electric 4.2 kW Required space approx. 5500 mm x 1100 mm x 1300 mm Weight INCLUDES: Aluminium stacking battens Wood moisture measurement probes Various spare parts Operating manual, electrical schematic, etc. Bsdpfxsxug Dcj Aacslp Note on used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location – free loading! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Year of construction: 1996, condition: good (used), Serial no. 1157, wood, output 306 kW, water temperature 95 °C, water flow 20 m³/h, control system renewed in 2019 +++ Attention: this item is part of an online auction! +++ Bjdpfx Aasxt Na Djcelp

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Very well-maintained compact drying chamber MÜHLBÖCK type QLSF-2x1.2-3x1.2-13 / year of manufacture 2004. Complete system including control unit. Heat requirement: 330 kW. The unit is still in operation! Full transport by truck is possible. Only the counterweight needs to be dismantled. The matching heating system can also be supplied upon request. Dismantling/transport by the buyer is possible. Construction dimensions can be found in the attached drawing. Blsdpfxjxt Hwao Aacep

Year of construction: 2000, condition: used, machine/vehicle number: 99340, ISVE VACUUM DRYER: Model Junior 5, Capacity 0.7 m3, Weight 550 kg Blsdpfx Aajxtnknocop

Condition: ready for operation (used), Year of construction: 2000, INOX Vacuutronic year of manufacture 2008 10+3 heating plates 4850x820 mm Bsdpfx Ajxrglhsacjlp 2.5 m³ Transport dimensions approx. 5200 x 1400 mm (LxWxH) Weight approx. 2200 kg

Year of construction: 2017, operating hours: 1,800 h, condition: like new (used), functionality: fully functional, power: 9.5 kW (12.92 HP), product height (max.): 24,000 mm, machine/vehicle number: mk 20-2, Woodmizer WMDK. 3 phase conainer series of kiln drier , 9.5 kw kiln drier 8.25 cubic metre load of 50mm boards Blodpfx Ajxqn Izoacsp in very good condition and fully functional heat and vent kiln , fitted in a 6 metre insulated container , has external trolley frame . only 1800 hours run time . just plug it in and ready to go

Condition: new, Airplan — Modular Drying Kit for Lumber & Pallets Short Description Blsdpfoxnbctox Aacep Airplan is the simplest and most cost-effective solution for drying wood, especially softwoods. It is a ready-to-install kit designed to be mounted inside a structure you construct yourself (according to our supplied drawings), with a capacity of up to 25 cubic meters. With Airplan, you minimize your investment while achieving precise and professional drying results for lumber or pallets. What It Is Airplan is a comprehensive drying kit that includes everything required to convert a simple enclosure into a professional wood-drying chamber. We provide the structural drawing—you build the housing, install our kit, and you're ready to start drying. Main Components - 3 industrial axial fans for controlled air circulation - Electric heating element kit to ensure reliable heat supply - 2 automatic dampers for optimized air exchange and humidity regulation - Electrical control panel with drying software interface, including all necessary power and control connections - Water spray pipe with nozzles Key Benefits - Minimal capital investment—purchase only the essentials, not an entire prefabricated kiln - Reduced transport costs due to the compact kit format - Fast and straightforward installation with user-friendly operation - Professional-grade components and high-quality materials for long service life - Precise drying control suitable for both lumber and pallet production Applications - Small to medium-sized sawmills - Pallet manufacturers - On-site drying operations where a complete kiln is not economical - Pilot installations before scaling up to larger systems What We Provide - Complete Airplan kit (see components above) - Structural drawing and installation guidelines - Basic start-up support and commissioning instructions Next Steps / Contact For a quote, technical information (electrical requirements, power ratings), or the structural drawing, please contact us with your desired drying capacity and planned enclosure dimensions. We will tailor the configuration to your needs and provide a detailed offer.

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Blodoxgdrbspfx Aacop

Condition: excellent (used), I am selling wood drying kilns in very good condition. Bedpfx Aoxf Nybeacolp

Year of construction: 2025, condition: new, Drying container WISSMATEC Drying floor Hydraulic moving floor Year of manufacture 2025 Bljdpfx Ajxd Uznoacop Optional: - Discharge and dosing screw conveyor - Rotary valve - Hydraulic lid - Manual lid - Cyclone - Ventilation system

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 Bsdpfjxc Eitjx Aacelp • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Year of construction: 2022, operating hours: 6 h, condition: like new (used), functionality: fully functional, 3 pieces of nearly new PROLAIN dryers, each approx. 170 m³. Further technical data available on request. Sale on behalf of customer. Blodpexcifrefx Aacjp

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm We are offering our fully operational exhibition dryer with a diameter of 1090 mm. Bodpfexbz Hrsx Aacolp The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Wood moisture measurement at 3 measuring points Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning

Condition: good (used), Year of construction: 2008, functionality: fully functional, ALFA 4000 FGDMV/FGDL – Semi-Pneumatic Drum Dryer Type: Semi-pneumatic rotary drum dryer Application: Drying of wood residues and chips Condition: Used, industrial-scale equipment Location: — (Ukraine / EU border region – specify for listing) Technical Data Operation with Gas Burner (natural gas as fuel) Feed capacity: 17,500 kg/h Initial moisture content: 52% Final moisture content: 12% Water evaporated: 7,955 kg/h Thermal power required: 7,310,023 kcal/h (8.50 MW) Completely dried product: 9,545 kg/h Natural gas consumption: 860 m³/h Installed power: 210 kW Operation with Biomass Furnace (dry wood waste as fuel) Feed capacity: 17,500 kg/h Initial moisture content: 52% Final moisture content: 12% Water evaporated: 7,955 kg/h Thermal power required: 7,310,023 kcal/h (8.50 MW) Completely dried product: 9,545 kg/h Wood waste consumption (furnace): 2,284 kg/h Blsdpfxexa Du Ae Aacep Net dried product weight: 7,261 kg/h Main Components Special wood-fired furnace with refractory lining, secondary air fan, and 12 kW drive motor. Gas direct-fired furnace FGDMV 8000 (natural gas) with modulating burner, pressure stabilizers, flame control system, 8 kW motor, and central control box. Heavy-duty supporting frame made of carbon steel. Rotary drum (3 coaxial sections, internal lifters, flanged head with inspection hatches, support rings, 4 support rollers, geared group drive, 30 kW motor). High-efficiency fan with 166 kW drive motor. Cyclone filter group (4 × USA 1400 type) with distribution duct. Automatic lubrication line with electric pump, dosing nozzles, oil reservoir, and electronic drip system. Main electrical control cabinet equipped with Siemens S7-200 PLC, Siemens color touch panel, frequency converter Danfoss, Omron controllers, spark detectors, safety relays, and local operator devices. Highlights High-capacity industrial drum dryer designed for large-scale wood residue and chip drying. Flexible operation: natural gas burner or biomass furnace. Designed thermal capacity: 8.5 MW. Output of up to 9.5 t/h dried product. Complete with auxiliary equipment (fans, cyclones, control system).

Year of construction: 2025, condition: new, Equipment: CE marking, A single-chamber kiln, type EKOPOL 1/78, with air circulation, computer-controlled, designed for a net load of approximately 78 m³ of timber (at a 36% chamber fill rate). Bodpjw U Aynofx Aacelp ===== Product in stock Condition: NEW Year of manufacture: 2025 Control system with a lifetime license – available in the following languages: English, German, French, Polish, Russian, and Ukrainian. Remote access: android/ios/windows/macos 2-Year Warranty ===== Loading space dimensions: - Loading width: 13 m - Loading depth: 4 m - Loading height: 4.1 m - Gross loading capacity: 214 m³ - Net loading capacity: 78 m³ (with 36% fill rate) ===== Single-chamber kiln, type EKOPOL 1/78 + Heat distributor with fittings. Includes equipment, installation (self-sufficient team of four fitters, a service technician, an electrician team, and an electronics technician – all equipped with complete tools), commissioning, training, and start-up: €108,000 ===== Optional equipment: 1) Heat recovery system + €25,000 2) Control room + €7,500 3) Inverter + €7,000 Drying kilns manufactured by EKOPOL meet the requirements of the New Approach directives and bear the CE marking, confirming compliance with Polish and EU legislation. EKOPOL chamber dryers are certified with the EU EC declaration of conformity issued by an independent product certification body. The manufacturer provides an EC declaration of conformity. To ensure the highest quality of products and services, EKOPOL has implemented an ISO 9001:2015 quality management system certified by TUV Rheinland Polska. Currently, more than 1,455 wood drying kilns produced by our company are operating across Europe.

Condition: new, XPLAN is the result of nearly 50 years of Incoplan's experience in delivering highly efficient and energy-saving wood drying solutions worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires about one-third of the electrical energy. Blsdpew Ug Atjfx Aacep This is a gentle drying method, particularly suitable for both hardwoods and softwoods, preserving their qualities, but it can also be used for firewood drying. With the XPLAN PRO KIT, it is also suitable for drying resinous woods down to 8% moisture content. Suitable for both demanding hobbyists and professional woodworkers, these systems guarantee the best price/performance ratio for wood drying. Build or purchase your own structure, install and plug in XPLAN and start your drying process. For example, cargo containers can be adapted for this purpose.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Absolutely as-new belt dryer, make New Eco Tec Woody 500-100-1.0 SP, year of manufacture 2019. System only operated for one year! Very well maintained, as-new condition. Immediately available. Suitable for drying sawdust and wood chips up to 1.5 t/h. Inlet moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium: hot air 90°C to 110°C. Immediate takeover possible! Bljdpfxow Nrq Eo Aacop

Year of construction: 2023, condition: excellent (used), Capacity 850 m³/min. Overall size L x B x H 350 x 493 x 450 mm Weight 20 kg Bledpfx Asw I Hpajacjp Electric capacity 0,19 kw 850 m³/min Dimensions (HxWxD) L x B x H 350 x 493 x 450 mm

Condition: used, Kilns 6 pcs. Manufacturer: Balt Brand Bjdow I Dgiepfx Aacolp Year of production: 2014 Capacity: 60 m3 per chamber Total capacity: 360 m3

Condition: used, Kilns QUANTITY: 4 Manufacturer: HB KRAKOW Model: HB90SW Year of production: 2012 Length: 9.4m Width: 5.6m Blodpsw Ipcpefx Aacjp Height: 5.5m Drying room capacity, m3: 90 (drying wood) Heat capacity of heaters: 500 kW

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: - Electric - Hot water / steam - Gas Key advantages: - Compact, transportable design for genuine mobility - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment Bodpfxjw Hf Ade Aacslp - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations.

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for both softwood and hardwood drying, as well as for ISPM-15 compliant pallet and wood packaging heat treatment. It guarantees full phytosanitary compliance and consistently provides high-quality drying results across a wide variety of timber species. Installation is completed in less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automated: simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: - Electric - Gas - Hot water / steam Key benefits: - Capacities of 10 m³ or 20 m³ to match different production requirements - Suitable for both softwood and hardwood - ISPM-15 compliant pallet and wood packaging heat treatment - Fully automatic drying process - Fast installation in under 24 hours Bedjw Hfzaepfx Aacjlp - Flexible heating solutions to suit available energy sources Easyplan is the ideal solution for companies seeking a compact, fast-to-install timber drying and ISPM-15 pallet treatment system that does not compromise on performance or quality.

Condition: new, functionality: fully functional, Capacity: from approx. 200 up to over 2,000 EPAL pallets (1.2 × 0.8 × 0.15 m) Product description: The Superplan is a professional system for drying and heat‑treating pallets in full compliance with the ISPM‑15 standard, ensuring proper sanitization for export. Designed to handle any type of wood, it reliably achieves a core temperature of 56 °C for at least 30 minutes, guaranteeing the elimination of pests and pathogens in accordance with international regulations. Available heating options: - Gas - Electric - Hot water / steam Its modular design allows for front loading or tunnel configurations, optimizing hot‑air circulation and improving thermal efficiency through controlled internal ventilation and dedicated core‑temperature sensors. Key benefits: - Variable capacity: from 200 up to over 2,000 EPAL pallets per cycle. - Guaranteed compliance with ISPM‑15 export requirements. - Flexible heating options: gas, electric, or steam/hot water. Bjdpfxsw Hfv De Aacelp - Energy‑efficient with precise ventilation control and core‑temperature monitoring. - Robust and adaptable: ideal for high‑productivity industrial operations. Superplan is built for pallet manufacturers and wood processors exporting worldwide — combining efficiency, regulatory compliance, and flexible energy options in a single, high‑performance solution.

Condition: like new (used), Second-hand timber drying kilns, 2 units x 60 m³ + second-hand steaming chamber 30 m³ The drying kilns are equipped with included inverters: The inverters control the fan speed according to the wood moisture content. This optional feature optimizes the air speed inside the drying chamber based on the condition of the wood, thereby limiting energy consumption to the required level and preventing unnecessary use. The system is fitted for Danfoss® VLT inverters, sized according to the total fan load in each chamber. The steaming chamber includes: stainless steel vats on 3 sides and stainless steel radiators on 3 sides Bedpfxew Exkls Aacjlp Specifications for the drying chamber + steaming chamber: Net internal dimensions for the kiln (2 units): Width 8,500 mm / Net depth 5,700 mm / Net height 4,100 mm Net internal dimensions for the steaming chamber (1 unit): Width 4,600 mm / Net depth 4,200 mm / Net height 4,100 mm Loading method: Forklift Ventilation system: fans x 2 chambers, Danfoss FC102 inverter x ...

Year of construction: 2014, condition: excellent (used), Complete lumber drying and steaming line, year of manufacture 2014, second hand - 2 Baschild TDK drying chambers, each with a capacity of 100 m³/cycle, and 1 Baschild DVKI steaming chamber with a capacity of 30 m³/cycle - Thermal energy is supplied via superheated water at 130°C - Chambers are insulated with included mineral wool - Connections required: heating fluid/hot water at the external chamber flanges, cold water for humidification at threaded external pipes, cold water for wet bulb sensor at the technical room to be built next to the installation, 400V electricity for each electrical panel and 230V for the panel server, as well as LAN connection to the panel server Characteristics of the TDK drying chambers (2 units) - Net drying dimensions: width 9000 mm, net depth 8700 mm, net height 4100 mm - Loading is performed by forklift Bjdpjw Ewlbefx Aacelp - Ventilation system: 6 fans per chamber, each with Danfoss FC102 inverters - Control system: Baschild ZOOM Server configuration DVKI steaming chamber characteristics (1 unit) - Net capacity 30 m³/batch - Sliding door - Baschild ZOOM thermostat - Oxyvent overpressure system - Heavy-duty supporting structure Included accessories: stainless steel basins and radiators on 3 sides Thermal agent production options (optional) - Superheated water boiler, 1 Gkcal/h, automatically fed with wood waste, year of manufacture 2014, brand SCEAT Italy, with flue gas exhaust system consisting of fan, multi-cyclone, fittings, and chimney - Silo with 2 scrapers with hydraulic pistons and hydraulic control unit for boiler feeding, dimensions 6000×4000 mm, year of manufacture 2014