OptiCAMMS GmbH

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 Fjdeyiz T Njpfx Abuspc MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM P600 Year of manufacture: 2021 Powerful and precise die-sinking EDM machine specifically engineered for demanding applications in tool and mold making. Thanks to its state-of-the-art control system, excellent surface finish, and high efficiency, it presents an outstanding investment opportunity for companies valuing precision and cost-effectiveness. Key Features & Benefits: ✅ Large working area & high load capacity: Travel ranges (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1,220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Accurate positioning ensured by linear glass scales (no recalibration required) Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Surface finish up to Ra 0.08 μm ✅ Powerful control system & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM integration for seamless data transfer Job management with prioritization and real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 16-position electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-frame design for high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision tool and mold machining ✔ Series production with stringent quality demands ✔ Complex geometries and fine surface textures Fpodpfxeyizmio Abuec The machine will be cleaned, serviced, and thoroughly tested after your order to guarantee top quality and reliability. We are also happy to commission the machine at your facility after delivery.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 95428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 450 mm Table length: 750 mm Table width: 600 mm Maximum workpiece length: 1,200 mm Maximum workpiece width: 850 mm Maximum workpiece height: 400 mm Maximum workpiece weight on table: 1,600 kg Fedpeyhn Hgjfx Abuepc Tool changer (number of tools): 24 Maximum electrode weight: 100 kg MACHINE DETAILS Connection: 50 Hz 3x 400 V Dimensions & weight Dimensions (L x W x H): 3,150 x 2,750 x 2,960 mm Machine weight: approx. 4,500 kg EQUIPMENT C-axis Tool holder system EROWA Fire suppression system Lamp

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2575, workpiece weight (max.): 500 kg, total height: 2,620 mm, total width: 2,320 mm, total length: 1,600 mm, table width: 550 mm, type of input current: three-phase, table length: 350 mm, warranty duration: 1 months, feed length X-axis: 350 mm, feed length Y-axis: 270 mm, feed length Z-axis: 270 mm, feed rate Y-axis: 5 m/min, feed rate Z-axis: 10 m/min, input voltage: 400 V, overall weight: 1,700 kg, year of last overhaul: 2024, table load: 500 kg, input frequency: 50 Hz, tank capacity: 400 l, Equipment: documentation/manual, Machine Exeron EDM 310 s.n.2575 year 2008 (general reparation in 12/2024) Configuration of machine: Fsdpfxjyanube Abuspc EDM Generator EroForm – 60A with APF Rotation tool changer with 20 positions C-box for hardmetal Heat exchanger for external cooling water Pneumatic Chuck Erowa(installed) or Hirschmann

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM 300 Year of manufacture: 2014 Die-sinking EDM machine in C-frame design (fixed table) with automatic lowering tank Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Table dimensions: 750 x 600 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg Innovative ISPG Generator (Intelligent Speed Power Generator) for maximum efficiency Maximum working current: 80 amps Surface finish up to Ra 0.08 µm AC FORM HMI with intuitive user interface & touchscreen Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Fpsdpox Sv E Hjfx Abuec Pneumatic chuck of your choice (Erowa or 3R Systems) Includes 6-position electrode changer LTC Machine dimensions: 2265 x 2110 x 2780 mm Total weight: 4,500 kg The machine will be cleaned, overhauled and extensively tested prior to sale to ensure the highest quality and reliability. We are also happy to offer you additional services: - Transport - Commissioning - Training - Accessories such as clamping devices

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Ingersoll (OPS Ingersoll) Fpodpfx Asx Ryzcobusc Sinker EDM Machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld – multifunctional hand control device Manual eroding with Powertec Handheld High speed jump up to 18 m/min Generator output: 60 Amperes, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm 20-position pick-up disk electrode changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Condition: Refurbished Special equipment: Linear measuring system on all axes (standard on Z-axis in Z series)

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, year of last overhaul: 2025, GF FORM 30 Revised Die-Sinking EDM Machine Year of manufacture: 2015 AC FORM HMI control system Travel paths (X/Y/Z): 600 x 400 x 400 mm Max. workpiece dimensions: 1000 x 700 x 400 mm Max. workpiece weight: 1000 kg Integrated C-axis, rotation speed U = 0–100 rpm Fpjdpfx Aex Ifrhobuec Manual tank level adjustment: 150–450 mm ISPG generator with 80 A Best surface finish: Ra 0.1 µm 6-position electrode changer in magazine Operation via 15" flat screen monitor with mouse Jogbox for manual operation Machine dimensions: 1600 x 2700 x 2858 mm Total weight: 4400 kg The machine will be cleaned, serviced, and tested in our facility after receipt of your order. We are pleased to offer you the following optional services: - Transport - Commissioning and operator training - Clamping devices - Dielectric fluid

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Year of manufacture: 2017. Fodpfx Aex Htfyebujpc Inspection under power possible.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,858 mm, overall weight: 4,400 kg, number of axes: 4, This 4-axis AgieCharmilles Form E 600 die-sinking EDM machine was manufactured in 2019. It offers precision and efficiency for complex mold manufacturing. Consider the opportunity to buy this AgieCharmilles Form E 600 die-sinking EDM machine. Contact us for more information. Additional equipment • Linear tool changer (LTC): 6 positions Machine Benefits Technical Machine Benefits • Operating system: windows input devices: 17" lcd monitor, mouse or touchscreen, keyboard, and remote control • Axis speed (x, y): 4 m/min z-axis speed: 4 m/min • Position readout accuracy (x, y, z): 0. 1 µm • Max. Electrode weight: 50 kg • Max. Workpiece size: 1000 × 700 × 400 mm • Work tank dimensions (w × d × h): 1200 × 800 × 500 mm Fpjdpfx Abjx D Nimsusc • Table size: 800 × 600 mm • Distance from floor to table surface: 900 mm • Min. /max. Distance from table to chuck: 150 / 450 mm • Power supply: standard voltage 3 × 380 v / 400 v ±10%, 50/60 hz Extra Information C-axis (standard) Max. electrode weight: 25 kg Rotational speed: 0–100 rpm Dielectric Tank capacity: 750 liters Dimensions Machine Depth 2700 mm

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,858 mm, overall weight: 4,400 kg, This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, it's ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information. Fjdsx D D Dfepfx Abujpc Machine Benefits Technical Machine Benefits • Work tank size: 1200x800x500 mm • Work table size: 800x600 mm Extra Information Machine still under power Dimensions Machine Depth 1600 mm

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, GF AgieCharmilles FORM 3000 Year of manufacture: 2008 C-type design, fixed table with lowering tank Travels (X/Y/Z): 600 x 400 x 500 mm Distance table to ram: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (U=0-100 rpm) Fedpfoxx Uqfex Abujpc Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 operating interface 15” color LCD monitor, mouse or touchscreen, membrane keyboard, and manual control Including CAPA electrode changer: - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm The machine has already been cleaned, serviced, and thoroughly tested. We would be pleased to invite you for an inspection and test erosion. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: excellent (used), Year of construction: 2021, operating hours: 5,874 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,500 kg, total height: 2,520 mm, total width: 2,530 mm, total length: 2,470 mm, table width: 100 mm, distance table to quill: 660 mm, table length: 600 mm, For sale is a very well-maintained Exeron EDM313 Model EDM 313 Travel X x Y x Z 620 x 420 x 400 mm Machine table 1,000 x 600 mm Tank 1,070 x 670 mm Table/quill distance min./max. 160/560 mm (660 mm)* Maximum electrode weight 50/250 kg Maximum workpiece weight 1,500 kg Fpodpfx Aoxxy Rdobuoc Tank fill height 400 mm Overall dimensions W x D x H 2,530 x 2,470 x 2,520 mm Generator current 60 A/120 A Power supply 400 V, 3AC, 50 (60) Hz Power consumption without chiller 8 kVA/10 kVA

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, total height: 2,965 mm, total width: 2,135 mm, total length: 2,855 mm, quill stroke: 500 mm, workpiece length (max.): 880 mm, workpiece width (max.): 680 mm, workpiece height (max.): 350 mm, overall weight: 3,900 kg, Sinker EDM Machine AGIE Impact 3 Year of manufacture: 2003 Travel paths (X/Y/Z): 500 x 350 x 500 mm Max. workpiece dimensions: 1070 x 530 x 350 mm or 880 x 680 x 350 mm Max. workpiece weight: 800 kg Internal dimensions of work tank: 1090 x 730 x 490 mm Programmable fluid level: 0-390 mm Including C-axis with 0-60 RPM Max. electrode weight on C-axis: 50 kg Without electrode changer Average discharge current: 72 Amps Material removal rate copper-steel: 450 mm³/min Material removal rate graphite-steel: 530 mm³/min Fedpoxt H Irsfx Abuspc Machine dimensions: 2855 x 2135 x 2965 mm Machine weight: 3900 kg The machine is in stock, has been cleaned, overhauled and tested. We are happy to perform a custom test for you and advise you regarding your application. We also offer commissioning and warranty upon request.

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Fpodsxrpm Uopfx Abusc Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: used, Year of construction: 2000, Sinker EDM machine Manufacturer: Exeron Model: EDM 314 Year of manufacture: 2000 Retrofit in 2016 Travel X/Y/Z: 900 x 700 x 450 cm Work tank: 1,200 x 900 mm Tank fill height: 500 mm Automatic chuck on quill H8.11.18 8-position pick-up sliding tool changer Fpjdpfsxl Ah Eox Abuoc Remote control with electronic handwheel Integrated dielectric supply Full machine enclosure Contact protection Automatic back-flushable gap filter system Automatic electronically controlled cooling unit

Condition: excellent (used), Year of construction: 2011, OPS Ingersoll Gantry Eagle 800 Year of manufacture: 2011 Operating hours: 1703 Eagle Powertec control X, Y, Z travel: 550 x 850 x 450 mm Clamping plate: 760 x 1000 mm Max. workpiece weight: 2000 kg EROWA interface Submersible working tank C-axis Chiller Fire extinguishing system Remote control 20-station electrode changer 60 amp generator Incl. dielectric fluid (+/- 700 liters) Fedpfsxiwz Usx Abuspc Incl. probe Incl. probe on machine bed Incl. magnet 400 x 200 mm Incl. cabinet with accessories Incl. documentation Machine is powered up for inspection

Condition: used, Year of construction: 2011, table length 900 mm table width 900 mm Fedpfx Abjxf Nbfjuopc ampere 32 A Control MF 20 weight of the machine ca. 6 t dimensions of the machine ca. 2070x2850x2980 m

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 750 mm, table length: 650 mm, TECHNICAL DETAILS Version: Lifting Tank Internal dimensions (W x D x H): 770 x 670 x 440 mm Programmable/automatic dielectric fluid height: max. 395 mm Work Table Support surface (W x D): 750 x 650 mm Load capacity: 1,000 kg Travel Paths X / Y / Z (within working tank): 525 x 400 x 450 mm Y (for electrode change and loading position): 675 mm Control System PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. traverse speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min Min. distance between electrode clamping system and work table: 135 mm Max. distance between electrode clamping system and work table: 585 mm C-Axis Adjustable rotation speed: 1-20 rpm Measuring resolution: 0.001 degrees Load capacity for manual electrode change: 50 kg Load capacity for automatic electrode change: 15 kg Holding torque/clamping: Yes Fpjdpfxew T Tg Nj Abujc Max. electrode moment of inertia: 0.4 kgm² MACHINE DETAILS Dimensions (W x H x D) with generator: 2600 x 2680 x 2290 mm Space requirement with generator: 7.3 m² Machine weight: 4,360 kg Generator weight: 640 kg Connected load: 16 kVA Fuse protection: 32 A Supply voltage/frequency: 400 V / 50 Hz Operating hours: 2,001 h

Condition: used, Year of construction: 2008, Diesinking / EDM Travel distance X: 550 mm Travel distance Y :400 mm Travel distance Z: 350 mm table size X: 700 mm table size Y: 500 mm max. electrode weight: 80 kg max. workpiece weight: 1000 kg Fpedpfx Abow Ektfsuec tool changer: 5 -time cooler C-Axis

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, specially designed for demanding machining tasks in tool and mold making. Thanks to its modern control system, excellent surface quality, and high efficiency, it offers an excellent investment opportunity for companies that value precision and cost-effectiveness. Key Features & Benefits: ✅ Large work area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Positioning accuracy thanks to linear glass scales (no recalibration required) Innovative ISPG (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark discharge and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM linking for seamless data transfer Job management with prioritization and Real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 48-station electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-construction with high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision mold and tool machining ✔ Series production with the highest quality requirements ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and economical die-sinking EDM! 📌 Our used machine, built in 2015, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability. Fodpfxsw Ebtvo Abuopc

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface Fpedpfx Aewh Sigobuoc 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, MACHINE Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg WORK TABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance between table and quill without chuck (max/min): 595/180 mm WORKING HEAD Travel range X - Y: 565 x 400 mm Travel range Z: 415 mm Resolution X - Y - Z: 0.001 mm C-axis resolution: 0.001° Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Nominal current: 60 – 120 A Connected load: 15 – 23 kVA Fpsdpfewbalvox Abusc

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 667007, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller model: Windows Pentium, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Z-axis: 450 mm Resolution: 0.0001 mm Tank size: 1,220 x 870 x 470 mm Fsdpfx Absv Tnm Heuepc Working area Table dimensions: 750 × 600 mm T-slot dimensions (number): 12 mm (5 pieces) Distance between table and fixture: 150 - 600 mm Electrode and workpiece Max. electrode weight: 100 kg Max. workpiece weight: 1,600 kg Max. workpiece dimensions (W × D × H): 1,200 × 850 × 400 mm Dielectric Filter type: 8 integrated paper cartridges Tank capacity: 820 l Dielectric level: 145 - 440 mm (programmable) Container type: Lowerable tank Surface roughness: 0.20 µm Ra MACHINE DETAILS Weight: 4,400 kg Operating voltage: 400 V Installation dimensions: approx. 3,720 x 5,100 x 3,000 mm

Condition: used, Year of construction: 1994, table length 750 mm table width 550 mm ampere 60 A Control Makino MGE20 x-travel 600 mm y-travel 400 mm z-travel 250 mm workpiece weight 450 kg Fpsdpfx Aevxwygjbujc tool change unit 8 weight of the machine ca. 5,00 t dimensions of the machine ca. 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a die-sinking EDM machine of the brand OPS Ingersoll and the type Gentry Eagle 500 A matching Erowa automation for tool and workpiece change, as well as an identical 2nd system with tool changer are also for sale in the package Offer is only valid for one Ingersoll machine if you are interested in the complete machine please mention in your inquiry The machine is in very good condition and fully functional. Both machines are loaded via Erowa Automation, this machine does not have its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Fsdpfstdkk Asx Abuspc Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website