IMAVEG Industriemaschinenvermittlungs- und Vermietungsgesellschaft e.K

Condition: ready for operation (used), total height: 2,800 mm, total width: 1,800 mm, total length: 4,300 mm, empty load weight: 8,000 kg, Forming press for leather, textiles, hardboard etc... + roller system width 2500 mm Capacity: 50 Ton Max distance between table - ram: 175 mm Bwjdpfx Ahsyg Skme Heh Dimensions of the table: 2850 x 1250 mm dimensions stamp: 800 x 800 mm

Condition: used, Hydraulic Double Column Press Double Column Hydraulic Press SCHÖN Type TES 25 Machine No. 1847 Year of construction: 1977 - Retrofit in 2019 Completely overhauled by Schön (Hattingen) in 2019 - Excellent condition Press force: 25 tons Bsdoyg Rfpopfx Ah Howh Column width: 500 mm Lateral column passage: 120 mm Table size: 440 x 320 mm Table opening: Ø 50 mm Ram area: Ø 140 mm Clamping pin: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 330 mm Table height above floor: 910 mm Motor power: 4 kW Power supply: 400 Volt, 50 Hz - Complete hydraulic system renewed during 2019 overhaul - Complete electrical control replaced with a modern contactor-based system in 2019 to new machine standards - Stroke actuation via two-hand control, electric foot switch, or light barrier - Operating modes: setup, single stroke with two-hand control, single stroke via foot switch, control via light barrier - SICK light barrier type C 4000 with 1-stroke, 2-stroke, and safety function - Rapid stroke and working stroke - Stroke limitation pressure- or travel-dependent - Mechanically adjustable fixed stop - Press force regulation manual via knurled wheel - Adjustable dwell time 0.5-3 sec. (pressure holding time) - Stroke counter - Safety inspection per BGR 500 (for manual loading operations) performed 08/2019 - Complete documentation available (operating manual, hydraulic diagram, circuit diagram) Space requirements (L x W x H): 1100 mm x 1050 mm x 2100 mm Weight: 900 kg Very good condition

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Bjdpfx Aeyg Hacsh Howh Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Bwjdpeygyyiofx Ah Heh Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: ready for operation (used), total height: 2,200 mm, total width: 1,000 mm, total length: 2,500 mm, passage width: 1,570 mm, power: 11 kW (14.96 HP), empty load weight: 2,100 kg, load capacity: 200,000 kg, movable cilinder Max ram adjustment: 300 mm Bwjdpsygyxlefx Ah Hoh Drawningspeed: 9 mm/sec Workingspeed: 5 mm/sec Returningspeed: 10 mm/sec Max distance between table - ram: 760 mm Dimensions of the table: 1570 x 490 mm

Condition: ready for operation (used), power: 14 kW (19.03 HP), load capacity: 250,000 kg, Vapo 250 ton Max ram adjustment: 300 mm Max distance between table - ram: 700 mm Dimensions of the table: 600 x 600 mm Bjdpsygyxrjfx Ah Hjwh

Condition: ready for operation (used), load capacity: 200,000 kg, Type 2H5 blank holder pressure: 80 ton Bsdpfx Aheygyxxs Howh blank holder stroke: 300 mm Max ram adjustment: 720 mm Drawningspeed: 300 mm/sec Workingspeed: 15>39 mm/sec Returningspeed: 200 mm/sec Max distance between table - ram: 1200 mm Dimensions of the table: 1500 x 1200 mm Max counter-pression table: 80 ton Adjustable ram / counter-pression: 300 mm Electric motor (power): 50 hp

Condition: ready for operation (used), power: 36 kW (48.95 HP), empty load weight: 17,000 kg, load capacity: 160,000 kg, ZE 160/200-10 Max ram adjustment: 600 mm Max distance between table - ram: 900 mm Dimensions of the table: 1056 x 1000 mm Max counter-pression table: 100 ton Bedpfx Ahjygyx Eo Howh

Condition: ready for operation (used), total width: 1,900 mm, total length: 3,200 mm, empty load weight: 42,000 kg, Soenen dieptrekpers 400 ton Capacity: 400 Ton Max ram adjustment: 850 mm Bodpfx Ajygyypoh Hewh Drawningspeed: 300 mm/sec Workingspeed: 20 mm/sec Returningspeed: 300 mm/sec Max distance between table - ram: 1400 mm Dimensions of the table: 2200 x 1100 mm Max counter-pression table: 160 Ton Adjustable ram / counter-pression: 350 mm Electric motor (power): 125 CV Height: 5800 + 1800 mm

Condition: ready for operation (used), passage width: 1,100 mm, power: 55 kW (74.78 HP), empty load weight: 26,000 kg, CNC Hydraulic deepdraw- transfer press line !! 4 dies available: 2 in use 2 reserve !! Equipped with HMS doublehead decoiler and HMS straightener HMS Straightener RS 87-03/0 max bandwidth: 300 mm 7 straightening rolls at Ø 80 mm 2 (pneumatic) drawing rolls atØ 120 mm speed: 2-10m/min bandthicnkess: 0,8 - 3 mm HMS decoilerBA 3.3-03/040 max bandwidth: 300 mm max coilweight: 4 ton inner coildia:Ø508 mm outer coildia:Ø 1500 mm hydraulic system: 2,2kW - 100 bar - 11l/min Automatic CNC Feeder (HMS PSV-3-S0) Automatic toolchangingsystem Stroke in table: 150 mm Stroke in cushion: 100 mm Capacity: 200 Ton Max ram adjustment: 400 mm Command (feet/Double hand): CNC Max distance between table - ram: 1000 mm Dimensions of the table: 1000 x 1000 mm dimensions stamp: 1000 x 1000 mm Max counter-pression table: 35 Ton Max counter-pression ram: 2 x 1 Ton Bsdeygyy Aepfx Ah Hjwh

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 800 t, table width: 2,500 mm, table length: 4,900 mm, operating speed: 60 mm/s, overall weight: 225,000 kg, working height: 2,500 mm, LOIRE HYDRAULIC PRESS TECHNICAL SPECIFICATIONS Brand: Loire Safe (Gestamp) Model: EDIM-800-150 Year: 2018 Press force: 800 t Cushion upper pressure: 150 t Table surface: 4900 x 2500 mm Bwsdoygty Nopfx Ah Hsh Maximum opening: 2500 mm Stroke: 2000 mm Total working height: 2500 mm Minimum working height: 500 mm Weight without tooling: 225,000 kg Main motor: 2x 75 kW Working speed: Max 60 mm/s PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MILL, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Used By Malaysia Car Manufacturer Very well maintain & very less usages. KOJIMA PHD 1800 Bsdpfxsyf Swqo Ah Hjwh KOJIMA DBM 300 Both for sales

Condition: good (used), Year of construction: 1983, machine/vehicle number: 809.14, Offer 25461 Technical data: - Max. pressing force: 30 t - Press pressure regulation Bwodpfx Ahsyff H Se Hsh - Stroke infinitely adjustable up to 200 mm - Stroke speed adjustable - Max. installation height: 450 mm - Machine table with T-slots: W 800 x D 500 mm - Clearance between columns: 600 mm - Usable table area: W 800 x D 500 mm - Drive: 400 V / 11 kW - Required space approx.: W 1000 x H 2300 x D 1600 mm - Weight approx.: 2500 kg

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Bwjdpfxeydluto Ah Hsh Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Condition: good (used), pressing force: 1,250 t, Pressing force: max. 1250 t Width: 585 mm. Bodpoyc Ebdjfx Ah Hewh height max. 480 mm. Stroke: max. 355 mm. Weight: 7200 kg.

Condition: used, Year of construction: 1984, pressure 1000 t stroke 200 mm total power requirement 30 kW weight of the machine ca. 8 t multiple images available Bjdpfsyacpajx Ah Hjwh

Condition: good (used), Year of construction: 1981, pressure 300 t Bjdpjx Uru Nofx Ah Hswh passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: used, Year of construction: 1994, operating hours: 27,436 h, functionality: unexamined, machine/vehicle number: 6915, pressing force: 80 t, table width: 500 mm, table length: 700 mm, overall weight: 6,500 kg, ram plate width: 400 mm, ram plate length: 500 mm, distance table to ram: 500 mm, stroke length: 300 mm, oil tank capacity: 485 l, Equipment: documentation/manual, safety light barrier, We are offering this used HYDRAP PRESSEN HPSK80 hydraulic press, year of manufacture 1994. Manufacturer: HYDRAP PRESSEN Model: HPSK80 Bwodpox Ti Auefx Ah Hjh Year of manufacture: 1994 Condition: used Category ID: 1330 Type ID: 1231 Machine type: hydraulic press If you have any questions or require further information, please feel free to contact us by message or phone.

Condition: excellent (used), functionality: fully functional, RÖCHER conversion 1991 (formerly SCHÖN) Pressing force: 1,600 kN Ram stroke: 160 mm Table dimensions: 850 x 650 mm Light curtain control system Next mandatory inspection: February 26 Clamping pin lock in the ram Bsdpjx Sw Iiefx Ah Hswh Rapid approach speed: 274 mm/s Working speed: 20/10 mm/s Return speed: 273 mm/s Drive power: 30 kW Operating voltage: 380 Volt/50 Hz Max. fuse rating: 100 A

Condition: used, Bruderer Press BSTA30.  30 Ton Capacity, Digital Display. Variable Range 100-600 RPM Stroke Adjustment 8-40mm Ram adjustment 40mm Drive Motor 5.5KWMax material Width 120mmMax Material Thickness 3mm Bwedpfx Ahox Sr Nbs Hjh

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Bsdjx Sr Evopfx Ah Hswh if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), functionality: fully functional, Manufacturer: MURARO Model: ID500/250 Year: 2001 Bjdpfxex R U R Es Ah Hewh Condition: Used Stock number: Code 0114 Maximum upper slide pressure: 500 tons Slide stroke: 900 mm Maximum daylight: 1,500 mm Table size: 2,700 x 1,600 mm Slide dimensions: 2,700 x 1,600 mm Blank holder table size: 2,450 x 1,250 mm Approach speed of slide: 650 mm/sec Blank holder cushion – total force: 250 tons Lower blank holder stroke: 400 mm Overall press height from floor: 5,600 mm

Condition: used, Year of construction: 1965, Make: MÜLLER, Model: BZE1600-35.2.1, Year of manufacture: 1965, Serial no.: 902, Max. press force: 1,600 t (ram 1,000 t + blank holder 600 t; can be coupled), Sliding table, 3,500 x 2,750 mm, Ram clamping area 3,500 x 2,750 mm, Ram stroke 1,400 mm, Ram adjustment 350 mm, Cushion force (table) 36 - 360 t, Cushion stroke (table) 250 mm, Hydraulic tool clamping on ram, Press control, Manufacturer: Siemens, Type: Simatic S7, Operator panel: Simatic OP37 Bwjdox Rzkxepfx Ah Hsh +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann Bedpfxex Ry Tfe Ah Hjwh +++ Note: Machine is part of an online auction! +++

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance Bwsdpfx Ahex Ry Nys Heh • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction