Used Idx 23 for sale (4,697)

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 170mm 6 spindles: 1) horizontal lower 230mm 5.5kW 2) vertical right 170mm 3) vertical left 170mm (spindles 2 and 3) 11kW Iodpfx Aoy N Ahijggoba 4) horizontal upper 230mm 11kW 5) horizontal upper 230mm 7.5kW 6) horizontal lower 230mm 11kW - all spindles adjustable up/down, right/left - spindles 4 and 5 with electric up/down adjustment - spindle speed 8000 rpm - spindle diameter 40mm - all spindles equipped with an electric brake - 6 top feed rollers, pulling, toothed, including 1 double roller - top discharge roller, pulling, rubber, double - bottom discharge roller, pulling, rubber, double - side pressure - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment 6-24m/min - feed motor 4kW - electric adjustment of planing thickness - body lifting motor 0.55kW - central lubrication of the table - diameter of extraction nozzles 6x140mm - dimensions (L/W/H) 4900x2400x2000mm - weight approximately 4000kg ADVANTAGES – German production, WEINIG brand – with 6 heads – unpainted – used planer, very good condition Original photos Net price: 122900 PLN Net price: 2926 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: used, servo motor, electric motor, DC motor, stepper motor, stepping motor Isdpfx Agjp Icf Segoba -Manufacturer: MDrive 23, Stepping Motor Stepper Motor -Type MDM1PSD23C7 -Shaft: Ø 6 x 18 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 120/58/H75 mm -Weight: 1.2 kg/piece

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Ibsdpfx Agezpbufsgoa Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Ibjdpfxozn N Auo Aggsa Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 more pieces in stock production year: 2020-22 heat output: 23kw gas burner + exhaust fan pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Ibedpfx Aeq Hu Afeggsa Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Connection voltage: IP21 AC 230V 50Hz

Condition: like new (used), Year of construction: 2017, Manufacturer: Kraus Year of manufacture: 2017 board length: 1600 board width: 1400 Roller diameter: 100 mm, material: steel. Ijdpfxonr Hfye Aggjba Axle distance between rollers: 120 mm Load capacity: 2000 kg Lifting height: 1700mm Without hydraulic power supply unit! Chain drive, with gear electric motor. 1.1kW, 400V, 50Hz

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 2087, functionality: fully functional, overall weight: 4,000 kg, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 125 mm, TECHNICAL DETAILS Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed rate: 6 m/min Maximum feed rate: 28 m/min Number of spindles: 6 Spindle speed: 6,000 rpm Spindle diameter: 40 mm Spindle motors 1. Spindle, bottom: 5.5 kW 2. Spindle, right: 5.5 kW 3. Spindle, left: 7.5 kW 4. Spindle, top: 11 kW 5. Spindle, top: 7.5 kW 6. Spindle, bottom: 7.5 kW MACHINE DETAILS Main fuse: 105 A Ibedpfx Agezrmpajgea Dimensions & Weight Dimensions (L x W x H): 7,500 x 2,000 x 1,850 mm Weight: 4,000 kg

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 123-2001, functionality: fully functional, planing width: 260 mm, rotational speed (max.): 6,000 rpm, number of spindles: 5, planing height: 120 mm, roller diameter: 140 mm, TECHNICAL DETAILS Maximum planing width: 260 mm Maximum planing height: 120 mm Infeed table length: 2,470 mm Number of spindles: 5 Spindle 1 Spindle type: Horizontal spindle Motor power: 5.5 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 150 mm Spindle 2 Spindle type: Vertical spindle Motor power: 11 kW Spindle diameter: 140 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 3 Spindle type: Vertical spindle Motor power: 11 kW Ibodpfx Agezuwrkjgsa Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 5 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 140 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Feed and extraction Diameter of feed rollers: 140 mm Feed motor: 2.2 kW Diameter of extraction nozzle: 140 mm Feed drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Electrical data Voltage: 380 V Current draw: 84 A Fuses: 100 A Total power: 39 kW Dimensions & Weight Dimensions (L × W × H): 4,000 × 1,700 × 1,650 mm Dry weight: 2,500 kg Shipping packages: 1 EQUIPMENT Tools for all spindles included Documentation

Year of construction: 1999, condition: used, Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Isdpownhicofx Aggjba Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, Price: On request Four-axis planer Kuper SWT 23 XL-5R Year of construction 2008 min/max Working height 8/150 mm min/max Working width18/230 mm Spindle speed 6000 rpm Spindle diameter 40 mm Motors Spindle - horizontal down 7.5kW  Spindle - vertical right 7.5kW Spindle - vertical left 11kW Spindle - horizontal top 11 kW Dimensions 3100 x1850 x 1750 mm (L x W x H), weight 4000 kg Outfeed table  Weidner buffer table Iodpfewnit Ajx Aggoba Type DBT 4500B Dimensions 4500 x1750 x 97 mm (L x W x H) Available from November 2024 - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Ibedpfxozqvhvj Aggsa

Condition: used, Year of construction: 1998, Four-sided planing machine Manufacturer: Weinig Type: P 23 E Year of manufacture: 1998 Technical data - Working width: 230 mm - Working height: 8-120 mm - Number of spindles: 5 (top, right, left, bottom, top) - Spindle speed: 6000 rpm - Feed rate: 5-24 m/min Ibjdezuzfujpfx Aggoa - Total connected power: approx. 25 kW - Infeed table: approx. 2000 mm - Weight: approx. 2500 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, Used 4-sided planing machine Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Ibsdpfxozuzdqo Aggja Technical data: 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Nominal pressure 8 bar Operating pressure 6 bar Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm Ibedpfx Agjzuy A Segoa - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, laser power: 20 W, total width: 605 mm, total height: 1,080 mm, total length: 350 mm, overall weight: 40 kg, warranty duration: 12 months, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m Ibedpfjxuqxqex Aggja - Extraction optional

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LAS 23, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically counted up by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 30W (optional: 20W, 50W) - Laser class 1 - Wavelength 1064nm - Marking field size 70x70mm (optional larger) - marking software EZCAD in German / English - Pilot laser (simple preview, clear text preview) - Laptop incl. holder with Windows operating system - Structure made of aluminum profile - Connection 230V including cable reel - air cooled - Dimensions: approx. 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg Ibedpfx Agsu Smd Sjgsa - Extraction integrated

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system Ibodpou Smcbsfx Aggoa - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: used, Year of construction: 2019, - Brand: Socage / Iveco - Type : 23T - Year of construction: 2019 - Hours: 1511 hours - Odometer: 11198 km. - Weight: 3315 kg. - Drive: Diesel + 220 volts - Working height: 23 meters - Lateral reach: 13.5 meters - Lifting capacity: 300 kg. - Automatic stamping - Narrow + Wide stamping - Dutch license plate possible - Export license plate possible Iedpfx Aoztzuysggoba - Safety inspection valid until Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Socage / Iveco * Lifting capacity: 300 kg. * Drive: Diesel + 220 volts *Type: 21DJ * Construction year: 2020 * Hours: 86 uur * Km. position: 3244 km. * Weight: 3300 kg. * Working height: 21 meters * Lateral reach: 10 meters

Condition: used, Year of construction: 2002, - Brand: Aichi - Type : SP 21 AJ - Year of manufacture: 2002 Ijdpfsztrmyex Aggeba - Weight : 14700 - Hours: 8378 hours - Working height: 23 meters - Lateral reach: 18 meters - Lifting capacity: 227 kg. - Drive: Diesel - Isuzu - Safety inspection through Aerial work platform book + CE document available - Complete maintenance history available - 1st owner - More photos and video on our website - Trade-in and transport possible * Brand: Aichi * Working height: 23 meters *Type: SP 21 AJ * Construction year: 2002 * Lateral reach: 18 meters * Weight: 14700 * Hours: 8378 uur * Lifting capacity: 227 kg. * Drive: Diesel - Isuzu

Condition: used, axle configuration: 3 axles, first registration: 01/2016, color: other, Year of construction: 2016, Empty weight: 4.861 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! Ibedpfezrfgqex Aggsa

Condition: excellent (used), color: blue, Year of construction: 2017, operating hours: 5,023 h, General information Field of application: Construction Weights Empty weight: 3.475 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: 2025-03-14 Production country: DE Additional information Please contact Vink Machinery for more information Klaas K23/33 TSR HA Ibsdpsyvurmofx Aggoa * 2017 * Diesel drive * 5023 operating hours * 33 meter hook height * 23 meter horizontal reach * Remote Control * 1500 kg lifting capacity * Wheel drive * Prepared for passenger work platform * Includes documents

Condition: used, mileage: 13,475 km, power: 130 kW (176.75 HP), first registration: 07/2023, fuel type: diesel, overall weight: 7,490 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, short cab, sprung seat, double bench seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 6-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, frame fairing, differential lock, leaf spring suspension, trailer hitch ball head, trailer hitch with air and light connections, underbody protection, sunroof, green environmental badge. Ibodezuc Iwepfx Aggsa Wheelbase: 3020 mm, Body: HIAB MULTILIFT XR5S3250 city skip loader for containers up to 4,000 mm, front axle, 4.1 t, rear axle, ring gear 325, hypoid, 6.2 t, differential lock rear axle, electronic braking system with ABS and ASR, disc brakes on front and rear axles, condensate monitoring for compressed air system, stabilizer, under frame, rear axle, standard cockpit, pollen filter, ClassicSpace, rain and light sensor, daytime running lights, high-performance engine brake, engine MB 60-1c, pump, Meiller pump, 5-piston, type 254/1, tipping platform, floor 4 mm, lashing recesses in the tipping platform floor, stability control assistant (ESP), lane keeping assist, Active Brake Assist, permissible total weight 21,000 kg. Multiple units available with mileage between 10,000 km and 33,000 km! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Technical data: - Spindle mount: MK 2 - Rated power: 750 W // 400 V // 50 Hz Ibodozrytljpfx Aggsa

Condition: used, Weinig Unimat 23E automatic planing and moulding machine for four-sided planing and profiling of timber, featuring a grooved bed for short and curved workpieces and a long dressing table. Short-piece package Grooved bed Mobile spindle Technical data: - Spindles: 6 - Spindle 1: Bottom / 50 mm / 5.5 kW - Spindle 2: Right / 50 mm / 11 kW - Spindle 3: Left / 50 mm / Shared motor with spindle 2 - Spindle 4: Top / 50 mm / 5.5 kW - Spindle 5: Top / 50 mm / 5.5 kW - Spindle 6: Bottom / 50 mm / 5.5 kW - Working width: 230 mm - Working height: 160 mm - Planing table length: 2,500 mm - Feed: 5.5 kW - Axial stroke of vertical spindles: 80 mm - Axial stroke of horizontal spindles: 45 mm Ibodpfezrx Emox Aggja

Condition: used, Weinig Profimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, with a long dressing table. Technical data: - Spindle 1: Bottom / 4 kW / 40 mm Ibodszrx Dpepfx Aggja - Spindle 2: Right / 5.5 kW / 40 mm - Spindle 3: Left / shared motor with #2 / 40 mm - Spindle 4: Top / 5.5 kW / 40 mm - Spindle 5: Bottom / 5.5 kW / 40 mm - Spindles: 5 - Working width: 230 mm - Working height: 120 mm - Feed: 2.2 kW - Planing table length: 2,500 mm