Ingenieurbüro Hüyüktepe, Helios Laser-Service

Condition: new, functionality: fully functional, control type: CNC control, laser power: 3,000 W, table length: 3,050 mm, table width: 1,530 mm, working length: 3,050 mm, working width: 1,530 mm, cutting speed: 120 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.02 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, IMPACT 3015A Fiber laser cutting machine suitable for high-precision cutting of metal plates, with high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product, and one of the world’s leading technology products. It is suitable for cutting metal plates such as stainless steel, carbon steel, alloy steel, silicon steel, aluminum, copper, brass, titanium alloy, galvanized sheets, etc. Unmatched Accessibility - Because the machine is an "open type" (without a full protective enclosure), operators have 360° access to the cutting bed. This makes loading raw sheets and unloading finished parts significantly faster and easier, especially when using a forklift or overhead crane. Space Efficiency - The 3015 model is designed with a compact footprint. Without the bulk of a large safety cabin or a dual-shuttle table system, it fits comfortably into smaller workshops where floor space is at a premium, providing a high "power-to-square-foot" ratio. Cost-Effectiveness - Open-type machines generally have a lower initial investment compared to fully enclosed or exchange-table models. They are also easier to maintain, as all mechanical components (rails, racks, and motors) are readily accessible for routine cleaning and lubrication. Efficient and precise cutting of medium and thin plates: • Easy access for loading and unloading the material from all 4 sides; Bwodpfxeyhclwj Ah Hsh • Auto-focus laser head; • Automatic edge detection; • Nesting included for optimizing the drawings and optimize material usage; • Easy to operate; • CE standard. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display 18.5 inch Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system Voltage stabilizer & regulator unit CE mark

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 11,500 h, laser type: diode laser, laser source manufacturer: Trumpf, laser hours: 11,500 h, laser power: 1,000 W, laser wavelength: 515 nm, year of last overhaul: 2023, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, TruDisk 1020 - Laser Unit SN L5210M0058, Bjdoyg Ig Repfx Ah Hjwh Power: Output power of 1000 W Green wavelength: 515 nm Operating hours: approx. 11,500 h Further information: The system is supplied with the operating manual and the service report from the last maintenance in digital form. The most recent maintenance contract with the manufacturer was valid until May 2023.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 27,500 h, machine/vehicle number: Seriennummer: S0711C001, Equipment: CE marking, documentation/manual, TruPrint1000 - Base Machine WITHOUT Laser Technical Specification of the Base Machine: TRUMPF TruPrint1000: Serial No.: S0711C001, Year of Manufacture: 2019, Installed: December 2019 Build Volume: Build cylinder diameter 100 mm, effective build area 97 mm, build height 100 mm Software Version: H.M.I. Version 02.22.04 Operating Hours: approx. 27,500 h* (of which 2,290 h production time) *status as of September 2023 Additional Information: Inspection and deinstallation of the machine were carried out by TRUMPF Service in September 2023. Until this point, the machine produced components in our production facility with very high quality (material used: copper alloy). With the machine, you will receive the operating manual and the service report from the latest maintenance in digital format. The most recent maintenance contract with the manufacturer was valid until May 2023. Bwedpfxoyg Ifaj Ah Hjh If you are interested or have any questions, please contact us by phone or email.

Condition: used, functionality: unexamined, Year of construction: 2019, Sales Description – Salvagnini L5 Fiber Laser System (3 kW) Our company is offering for sale a Salvagnini L5 fiber laser system from our company inventory, to be dismantled by the buyer. See pictures for the overall system. Bodsyg H Rzepfx Ah Hjwh Technical Data (as per type/indications): Manufacturer: Salvagnini Model: L5 Fiber Laser Power: 3 kW Maximum sheet size: 1,500 × 3,000 mm Condition & Notes: Used machine The system was last out of operation Completeness cannot be guaranteed Functionality has not been tested – no assurance provided Sale as inspected This system is suitable for professional businesses with the appropriate infrastructure, for recommissioning, refurbishment, or for spare parts recovery. Company sale – sold without any warranty, guarantee or returns.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Bwodpoygu Tkefx Ah Heh Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Operating hours: approx. 68,000 hours Bwsdpfoygik Djx Ah Hjh

Condition: used, Year of construction: 2016, Mazak Optiplex Nexus 3015 fiber laser is being sold as part of insolvency proceedings. Bedpfx Ahsyf Nl Eo Hswh

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,454 h, • Pressing force: 1000 kN • Bending length: 3060 mm • Usable installation height with manual or hydraulic tooling (Option: increased installation height): 350 mm (500 mm) • Usable installation height with TRUMPF Quick Clamp (Option: increased installation height): 430 mm (580 mm) • Max. distance between lower edge of press beam and upper edge of machine table (Option: increased installation height): 470 mm (620 mm) • Press beam tilting: ± 6.5 mm • Free distance between uprights: 3384 mm • Table width: 100 mm • Working height¹: 1049–1069 mm Speeds • Y-axis rapid traverse²: 200 mm/s • Max. Y-axis working stroke³: max. 15 mm/s • Y-axis return: 200 mm/s • X-axis: 500 mm/s • R-axis: 200 mm/s • Z-axis: 1000 mm/s Positioning accuracy • Y-axis: 0.01 mm • X-axis: 0.05 mm • R-axis: 0.1 mm Travel paths, backgauge zone • Y-axis stroke (Option: "Increased installation height"): 200 mm (350 mm) Bwjdoyfxdwepfx Ah Hoh • X-axis travel: 600 mm • Max. backgauge zone in X-direction: 860 mm • R-axis travel: 150 mm Control • Standard scope: T3500T Multi-Touch control Connection data • Connected load (IEC) approx.: 20 kVA Dimensions and weights • Required floor space (length x width): 3607 x 1644 mm • Height (Option: increased installation height): 2370 mm (2700 mm) • Weight (Option: "Increased installation height"): 7700 kg (8300 kg) Paint / Color scheme • Structural body: White = NCS S 0505 R80B • Blue = approx. RAL Design 250 20 20 • Black = RAL 9005; Silver elements with RAL 9006 Equipment Extended machine equipment BendGuard: – Optoelectronic safety device enabling fast and safe bending – Maximum Y-axis rapid traverse speed is not limited in pure foot-operated mode – Tool height can be set easily and quickly with a rack solution and weight compensation – BendGuard can be easily slid back for lateral tooling processes without reinstallation – BendGuard is insensitive to shocks (disassembly), as the unit electronics are not connected Table supports (2 pieces): – Table supports are manually adjustable in Z- and R-directions and can be fixed with quick-clamp – Facilitate handling of large and heavy workpieces and can serve as storage surface for finished parts – Load capacity: 70 kg per support LED work area illumination front and rear: – Excellent illumination inside and in front of the machine’s working area – Modern LED technology: energy-efficient, cool-running, and very long-lasting DXF import: – Import DXF drawings into the 2D control system.

Condition: good (used), Year of construction: 2005, The switch cabinets of a Trumpf laser system are for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Trumpf • Laser system: L-3050 (6kW, built in 2005) Shipping available on request (also internationally) Bwedoyfm Evepfx Ah Heh You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Bwsdpsyfl U Nsfx Ah Hjh

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 15,907 h, Table length: 3000 mm Table width: 1500 mm Laser power in watts: 3000 Control unit: B&R APC 910 Connected load: 33 kVA Approx. machine weight: 7,800 kg Control unit ON counter: 2,472 h Operating hours: 15,907 h Laser ON counter: 32,927 h Laser ON: 7,790 h Special Edition Equipment - Integrated solid-state laser TruDisk 3001 with 1 LLK output - Fully automated pallet changer (with light barrier) Standard Machine Equipment - Enclosed machine frame with integrated components - Motion unit for ultra-precise machining - Drives with maintenance-free three-phase servo motors - Sheet support accessible from both sides - Enclosed beam guidance via laser light cable (LLK) - Fully integrated cooling unit for laser and machine - Integrated control cabinet - Accompanying extraction system - Slag drawers - 19" touch color display - Power supply TruDisk via machine - Work area lighting - Positioning laser diode - PierceLine - FocusLine - NitroLine - Transport and assembly device - Copper cutting kit (includes cutting data) - Brass cutting kit (includes cutting data) TRUMPF Laser - LLK as per standard layout (laser directly beside machine) - Excitation via pump diodes - Laser power control - Laser logbook function Cutting Head - Universal cutting unit - Single-head cutting strategy - Protective glass for lens protection - ControlLine: height regulation and detection of sheet metal edges Control System - Simple drawing module - Easy workshop programming - Fast repeat production - Control B&R APC 910 - Integrated TRUMPF technology data - Automatic shut-off - Programmable cutting gas/pressure selection - ContourLine - FastLine - Microweld - Teleservice via internet - Microjoint - operation via control panel Bwjdpfxoyffmxj Ah Heh - Adjustable dynamics Data Transfer - RJ45 network connection and USB interface Safety - CE marking - Compact dust extraction unit - Machine enclosure with certified viewing windows - Motorized front door and rear opening - Enclosed machine roof

Condition: like new (used), functionality: fully functional, Year of construction: 2017, Working hours laser on: 40,564.83 (05.01.2026) h Bodsydq Hnopfx Ah Hjwh Working hours beam on: 12,271.33 (05.01.2026) h Laser power: 6,000 Watt Work range: 3,000 x 1,500 x 70 mm Machine length: 11,000 mm Machine width: 6,050 mm Machine height: 2,565 mm Machine weight: 12,000 kg Year of construction: 2017

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 49,524 h, machine/vehicle number: 2415.191, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Fanuc, laser type: CO₂ laser, laser hours: 49,524 h, laser power: 2,000 W, table length: 3,000 mm, table width: 1,500 mm, travel distance Y-axis: 1,500 mm, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, Amada CO2 laser. It has been in the company since 2006. Since 2017, we have had a fiber laser, so this CO2 laser has been used much less frequently since then (for trimming, corrections, and cutting profiles in a fixture). The laser is regularly used 1–2 times a week for smaller cutting jobs and is operational. Some components will definitely require servicing, but overall everything is in working condition. Bedpfsydpgtox Ah Hewh

Condition: good (used), Year of construction: 2010, Trumpf TruLaser 3030, Year of manufacture 2010 / Commissioned 2011, Control unit: Sinumerik 840 D SL, Working area: 3000 x 1500 mm, Pallet changer, Trumpf CO2 Laser TruFlow 3200, Quick-change cutting head system, Height control, Sheet outer edge detection, Lens cutting head with 130 mm lens, Bodpjydc Nzsfx Ah Hswh Lens cutting head with 250 mm lens, HighSpeed cutting package for rapid cutting of sheet thickness up to 1.5 mm, Network connectivity via ExtensionCube, Machine has been regularly serviced, Hose replacement has been performed, Resonator quartz tube replaced, Laser power: 3200 W Operating hours: 72,871 Laser on: 26,337 hours

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, sheet thickness (max.): 20 mm, input voltage: 400 V, type of input current: AC, Input voltage: 400V AC Frequency: 50Hz Connected load: 88kVA Control voltage: 24V DC Required fuse protection: 3x160A Laser power: 4,000W Compressed air connection: 7-10bar Nitrogen connection N2: 30bar Oxygen connection O2: 20bar Max. component size: 4,000x2,000x20mm Additional equipment: Bwodpfxsycwwdj Ah Heh FEZER Maschinenfabrig GmbH – vacuum lifter V03004 (year: 03/99) STOPA Anlagenbau GmbH & CoKG – loading storage system – 084997 (load capacity: 3,000kg, year: 2008, sheet format: 2x4m, storage capacity: 30t, storage height: 5.36m, storage positions: 10) Overhead crane Loading and unloading stations

Condition: ready for operation (used), Year of construction: 2022, product length (max.): 6,040 mm, number of axes: 3, This 3-axis LVD Phoenix fiber laser cutting machine was manufactured in 2022. It features a cutting length of 6040 mm, width of 2040 mm, and can handle material thickness up to 20 mm. Consider the opportunity to buy this LVD Phoenix fiber laser cutting machine. Contact us for more information about this machine. Bwedpfx Asycvmkeh Hjh • Width: 2040 mm • Thickness: 20 mm

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm Bwsdpjycuypefx Ah Heh - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: not inspected (used), functionality: unexamined, Year of construction: 2009, operating hours: 69,572 h, machine/vehicle number: 28510308, sheet thickness (max.): 20 mm, table height: 940 mm, travel distance X-axis: 3,270 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Auction of an Amada laser cutting system + LKI storage tower! Placing a bid obliges the buyer to collect the equipment within the specified timeframe between 23.03.2026 and 27.03.2026! AMADA LC-3015 F1 NT TECHNICAL DETAILS Travel Range X-axis: 3,270 mm Travel Range Y-axis: 1,550 mm Travel Range Z-axis: 100 mm Travel Range B-axis: 21 mm Cutting Area X-axis: 3,070 mm Cutting Area Y-axis: 1,550 mm Cutting Area Z-axis: 100 mm Cutting Speed X/Y: 0 – 60 m/min Rapid Traverse X/Y/Z: up to 120 m/min Table height: 940 mm Workpiece weight: 920 kg Sheet thickness mild steel: up to 20 mm Sheet thickness stainless steel: up to 12 mm Sheet thickness aluminum: up to 10 mm MACHINE DETAILS Control: AMNC-F Control type: CNC path control Controlled axes: X, Y, Z, B Simultaneously controlled axes: X, Y, Z Laser model: FANUC AF4000i-B Laser type: CO₂ laser Laser class: 4 Laser radiation: invisible Laser principle: AC-HF excited, fast axial flow Rated power: 4,000 W Max. power: 4,000 W Peak power: 5,000 W Stability: ±2 % Frequency range: 5 – 2,000 Hz Pulse duty cycle: 0 – 100 % Wavelength: 10.6 µm Laser beam diameter (output): 27 mm Laser beam divergence: < 2 mrad Cooling & Supply Chiller throughput: > 160 l/h Power supply: 55 kVA Positioning laser Laser class: 3R Laser radiation: visible Rated power: < 5 mW Pulse duration: CW Wavelength: 0.6 – 0.7 µm Laser medium: Semiconductor or HeNe Drive type: Linear drives Cutting gas regulation: automatic Machine weight: approx. 11,000 kg LKI ASLUL 300 F1 Storage Tower (Year of manufacture: 2009) TECHNICAL DETAILS Cycle time: approx. 3 min Pallet changeover time: approx. 50 s Raw sheet / unload pallets: 2 + 4 or 3 + 3 Maximum pallet weight: 3,000 kg Sheet size: max. 3,000 × 1,500 mm Sheet size: min. 2,000 × 1,000 mm Material thicknesses Automatic mode: 0.8 – 20 mm Shuttle mode: 0.8 – 25 mm Load data Sheet weight: max. 920 kg Load on cutting pallet: max. 920 kg Stack heights Raw sheet pallet stack height: max. 150 mm Unload pallet stack height: max. 220 mm Finished part size Finished part size (X × Y), free cut: min. 225 × 180 mm MACHINE DETAILS PLC: Mitsubishi Q-Series Operator interface: Beijer E1060 Dimensions & Weight Dimensions (L x W x H): approx. 4,630 x 4,225 x 6,000 mm Total weight: approx. 11,000 kg Bwedpsycqfuofx Ah Hoh EQUIPMENT Double sheet detection Overall dimensions (Amada + storage tower) Overall dimensions (L x W x H): approx. 11,000 x 10,000 x 6,000 mm Total weight: approx. 22,000 kg SCOPE OF DELIVERY Available manuals Note: The power supply displays an error message. It may be defective.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber Skid table Customs tariff no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 Watt laser power AJ Fiber Laser Principle: flying optic 3 axes direct drive (X/Y/Z), oil shot function Including sensor cutting head Including lens quick change system Including nozzle quick change system Including cutting lenses: 150, 190, 190 AX mm Including NC-gas control Including NC-focus control Including clean cut, high pressure cutting Including aluminum cut function Including air purge system Including CE-compliant safety features Including Software 5A-BLANKSOLPACK Including Shuttle Table PCLCG3015 Bwjdpfx Aheycf N Ij Hoh Year of manufacture: 04/2014

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, feed rate X-axis: 50 m/min, positioning accuracy: 0.015 mm, power: 3 kW (4.08 HP), total length: 3,700 mm, total width: 2,800 mm, total height: 2,400 mm, The TruLaser Cell 3010 from Trumpf is a versatile 2D/3D laser processing cell distinguished by its high precision (positioning tolerance approx. 0.015 mm) and speed (up to 50 m/min), making it ideal for series production of thin materials (0.1–5 mm). It is equipped with a 3 kW disk laser or fiber laser. Key specifications include the working area (e.g., 1000x500 mm), Siemens Sinumerik 840D control system, and connectivity options for remote monitoring, with a footprint of approximately L3700 x W2800 x H2400 mm. Bwodpfx Aeycf I Dsh Hjh The entire system is in excellent technical and optical condition and can be inspected under power if interested.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MAX 12kW mit CE, laser power: 12,000 W, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, power: 12,000 kW (16,315.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 8,000 kg, total length: 8,500 mm, total width: 3,500 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber Laser Cutting Machine 1530, 12 kW – Overview Safety & Protection Fully enclosed metal safety cabin with radiation-protected doors and windows. Environmentally friendly and safe for operators. Bwsdpfx Aheycfuwe Hjh Work Platform Parallel platform design with upper and lower levels: Front section: Laser cutting. Rear section: Loading and unloading. No interference between operations → increased work efficiency. Machine Structure 10 kW bed design: Segmented, time-controlled dust extraction. Excellent heat dissipation, thermal resistance. Industrial auxiliary equipment: Air conditioner, special cooling system, constant temperature & humidity → stable performance & extended service life. Precision Guarantee: Bed processed with a large gantry milling machine. Industrial linear guides, gears, and screw drives. Full servo control, dual-sided double drive. High industrial quality and precision. German assembly techniques: Precision laser interferometer calibration Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software package: Industry-standard, safe, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core Components Laser cutting head: BOCI BLT442 Laser source: MAX 12 kW, CE certified Water chiller: HANLI 12 kW Linear guides: TAIWAN DTX 30+20+20 Frame: TAIWAN JT Reducer: Germany Techmach Cameras: 2 units Servo motor: BOCHU Proportional valve: Felton Electronic components: SCHNEIDER Triple air inlets: nitrogen, oxygen, air Lubrication system: Automatic oil supply system Accessories 30 protective lenses, 30 nozzles, toolbox. Optional: ARS-30HP-XF-1.6 MPA air compressor, 7.5 kW dust collector.

Condition: ready for operation (used), Year of construction: 2024, laser power: 6,000 W, This HGTECH TP 6535 PLUS was manufactured in 2024. It is a fiber CNC cutting laser designed for cutting pipes, tubes, and both closed and open profiles. It operates with power ranging from 1 to 6 kW and can handle pipes up to 8.5 meters long and 280 mm in diameter. Contact us for more information about this machine. Bwodpfeybccpox Ah Hoh • Capacity: Cuts pipes up to 8.5 m in length and up to 280 mm in diameter

Condition: used, functionality: fully functional, Year of construction: 2000, laser source manufacturer: Trumpf, laser source model: TLF 3000 turbo, laser power: 3,000 W, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 6 bar, Trumpf Maschinen Grüsch AG, laser cutting machine, TRUMATIC LC3030 Model: LC3030 Series: Trumatic Year of manufacture: 2000 General information: Input voltage: 400V AC Frequency: 50Hz Connected load: 73kVA Control voltage: 24V DC Required protection: 3x125A Bwedjyazrtopfx Ah Hoh Laser power: 3,000W Compressed air connection: 6 bar Nitrogen connection (N2): 30 bar Oxygen connection (O2): 20 bar Max. component size: 3,000 x 1,500 x 20 mm Accessories: Liftmaster Loading and unloading stations

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm MACHINE DETAILS Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control Bjdpjyanr Tsfx Ah Hewh - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: used, functionality: fully functional, Year of construction: 2019, laser hours: 5,780 h, laser power: 4,000 W, TRULASER TUBE 7000 FIBER 4kW Year of manufacture: 07/2019 Laser power: 4kW fiber Laser on: 5780 h (!) Technical information: - Max. outside diameter: 254 mm - Loading and unloading - Loading with LoadMaster Tube: 6,5m / Automatic unolading: 4,5m - RapidCut  Use of a dynamic additional axis  More than fourfold accelerations possible Bevel cut technology package  Bevel cutting up to 45°  Contains electrically movable feed-through chuck - PierceLine  Optimized piercing process Bwedoyalb Eopfx Ah Heh - Technology package for tapping • Additional machining processes such as flow drilling, tapping and twist drilling • NC controlled spindle with standard clamping system (standard interface HSK-A32) • The application and technology parameters of the tool adapter and tools should be requested from the respective supplier • 8-fold tool changer ...and many more options!