Used Kf 4000 for sale (3,044)

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Bodpewtpfpefx Am Tsdf Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: ready for operation (used), Mapal MN5364-08-KF collet chuck, DIN 69882-7, with axial length adjustment, Ø 16 mm, DIN 4000-89-HSK - hollow shank taper base, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bsdpoi Eb Abofx Am Todf

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Bedpfx Amjzma Tbs Tjdf Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Bedpfx Aozma Skem Tedf

Condition: ready for operation (used), Wingspan: 3950 mm Bdedpfxjzp Iqgo Am Tjf Overall height: 3650 mm Load capacity: 4000 kg without lifting device

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F Bdsdpfoyga Ugex Am Tof • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: used, Used automatic shot blasting machine from KF Strahltechnik for sale. The machine is designed for the automatic shot blasting of profiles, sheet metal, and steel structures. The four blast wheels/turbines make the machine suitable for efficient processing of the top and bottom surfaces of workpieces. The machine is in good condition and is currently in operation. An inspection and test run at our facility are possible by arrangement. Technical data: Manufacturer: KF Strahltechnik Machine type: Automatic shot blasting machine Number of turbines: 4 Maximum workpiece width: 800 mm Maximum workpiece height: 400 mm Suitable for: Profiles, sheet metal parts, steel structures, and similar workpieces Processing: Shot blasting of the top and bottom surfaces Roller conveyor at the front: approx. 6 m Roller conveyor at the rear: approx. 6 m Condition: Good, currently in operation Inspection: Possible at the facility Test run: Possible by arrangement Delivery and sales conditions The stated price is the ex-works price for direct collection. Bdodpfxokw Ukus Am Tjf Dismantling, loading, transport, and installation/commissioning at the new location are not included in the price and can be offered separately if required. The machine is sold used and in its current condition. An inspection and examination before purchase is expressly possible. ✅ Automatic shot blasting machine from KF Strahltechnik ✅ 4 turbines/blast wheels ✅ For profiles and sheet metal parts up to 800 x 400 mm ✅ Roller conveyors at the front and rear, each approx. 6 m ✅ Currently in operation and in good condition ✅ Inspection and test run possible at the facility ✅ Price ex-works, dismantling and installation optionally available at an extra charge

Condition: ready for operation (used), There are two pipe pasteurisers available, including storage tank, capacity: 7000l. Bjdpjgi Nxaefx Am Tsdf

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Bdsdpfxorfucqo Am Tjf Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 9,200 kg, chuck outer diameter: 920 mm, through hole: 254 mm, total height: 2,000 mm, total length: 6,000 mm, total width: 2,000 mm, HEAVY DUTY, FLAT BED CNC LATHE WITH HARDENED & GROUND BOX GUIDEWAYS & 254 MM SPINDLE BORE SUITABLE FOR OIL COUNTRY APPLICATIONS. REAR 254 MM DIAMETER 4-JAW INDEPENDENT CHUCK, DUPLOMATIC V8 ELECTRIC AUTO TOOLPOST, COOLANT AND LIGHTING, FULL LENGTH REAR CHIP GUARD & SLIDING FRONT DOOR, 250 to 450 MM DIAMETER 3 POINT ROLLER STEADY REST, PREPARATION FOR FITTING OF BORING ATTACHMENT, STANDARD ACCESSORIES. CE MARKED MACHINE Bdsdpfx Aezq Adkom Tjf

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg Bdodsyhdi Rspfx Am Tef

Condition: used, Year of construction: 2000, Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator. container content: 4000 l Flow rate max: approx. 360 l/min. Filter fineness:: greater than 0.003 mm Bsdpfx Ajv N Iuiom Todf Connected load approx.: 9.0 kW (400 V / 50 Hz) Dimensions W x D x H: 6000 x 1200 x 1650 mm Weight approx.: 2000 kg colour: light grey

Condition: used, Hankook Protec 9NC/4000 4m Between Centres, fitted with 630mm Diameter 3 Jaw chuck with 250mm bore, also 800mm 4 jaw with 250mm bore , and 770mm rear mounted 4 jaw with 250mmm bore. 720mm Swing Over Saddle, 1000mm Swing Over Bed, Year 2008.3, Full length Swarf Conveyor, Fanuc 21i Control. Fitted with Duplomatic BSV-N250-8/25-220-380/60L. Available now under power at site to view, available now for supply. Specifications: Swing: 37.4" Machining Length: 157" Power: 26 kW Max RPM: 630 RPM Bodpfx Amjx I R Emo Tjdf

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Bdodpfx Amszdfb Hs Tof Capacity: 4,000 L Type of stainless: Stainless Steel Internal Pressure: 6 bar Internal Temperature: 130°C Jacket Pressure: 9 bar Diameter: 1,800 mm Straight Side: 2,450 mm Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: 4 Lugs

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Bedpfxszp H R Es Am Tedf Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: good (used), Year of construction: 1994, Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 4.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 9 to 45 m/min Bdodpfx Amozq Abce Tof -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 4000 mm -Base: height adjustable -Dimensions: 4000/360/H1050 mm -Weight: 328 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 x EME Series 2000 inline wrap-around labelling machine with ICE Zodiac ES thermal transfer printer. Mounted on height-adjustable frame. Bdedpfx Amoy Hkqyo Tsf It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. Manufacturer - EME. Serial Number - 15066. Date of manufacture - 2015. Labelling heads - 2 x EME Series 4000. Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (can go higher).

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors Bsdpfx Amezpzblo Tsdf - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm Bdsdpfx Amjzndq Ho Tef distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Bsdpfswwkk Iex Am Todf Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid In good working order

Condition: excellent (used), Year of construction: 2022, Ref: 11080 . 2022 Horizon CABS 4000-VF EVA Line Excellent Condition! Only 985,000 books produced! 'Computer Aided Binding System' designed for bind-on-demand production. ‘V’ = Variable, book on demand capability ‘F’ = Flap cover feeding capability Comprising: (2020) Tecnograf ‘MettaLibro’ Book block feeder SB-09VF Variable binder with hand feed station and 9 clamps LCD screen operator console for various functions/set-ups ‘PX-Core’ Central control computer system SI-15 book block sensor unit for auto system set-ups & quick book size/thickness make-ready S-09S Automatic feed unit Auto cover score & register settings from data input Milling & roughing station with DB-15 milling blower unit PM-20II EVA hot-melt pre-melt unit MU-09 EVA hot-melt spine glue unit with side glue discs Pile rotary grip cover feeder with double sheet detection LD-09 lay-down delivery belt PP-101 pre-stacking unit with approx. 9m conveyor to; HT-110 Automatic three knife trimmer HC-110 manual feed conveyor to use trimmer as standalone LCD screen operator console for various functions/set-ups Quick book size/thickness make-ready unit Dust bag extraction unit Roller delivery unit Including tools, accessories & manuals. Specification: Binder - book size: Max: 400 x 330mm (manual) Portrait Max: 330 x 250mm (auto) Min: 148 x 105mm Max: 330 x 320mm Landscape Min: 135 x 185mm Bsdsy Awcbopfx Am Todf Book thickness: 1 - 45mm Open cover size: Max: 400 x 660mm Min: 135 x 220mm Trimmer, book sizes: Max: 330 x 330mm untrimmed Max: 300 x 300mm trimmed Mechanical speed: Max: 4,000 cycles/hr. auto

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t Bsdpfxezmy Tbe Am Tjdf required space 16000 x 5000 mm

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Year of manufacture: 1984 Bdedpfxjzrbuqo Am Tsf Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Drive: 3 kW Roughing spindle Finishing spindle Locking arm Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: used, plate width 4000 mm plate depth 2500 mm plate height 300 mm weight 6,2 kg Bdodpjzl Hcgsfx Am Tef STOLLE Clamping Plate / Clamping Bed 4000x2500x300 mm L x W x H: 4000 x 2500 x 300 mm Total area (for 2 plate sections): 20 m² T-slot dimensions: 28 x 48 mm (slot width x depth) Plate thickness: 110 mm Number of slots: 10 Edge distance: 124 mm T-slot spacing: 250 mm Note: I am offering one clamping plate for sale. A second, identical clamping plate with the same dimensions is also available. Both plates are exact matches and can be joined together if required to create a larger clamping surface. The second clamping plate is also available upon request. Please feel free to contact me if you are interested in both plates or have questions regarding their combined installation.

Condition: used, plate width 4000 mm plate depth 2500 mm plate height 300 mm weight 6,2 kg STOLLE Clamping Plate / Clamping Bed 4000x2500x300 mm L x W x H: 4000 x 2500 x 300 mm Total area (for 2 plate sections): 20 m² T-slot dimensions: 28 x 48 mm (slot width x depth) Plate thickness: 110 mm Number of slots: 10 Edge distance: 124 mm T-slot spacing: 250 mm Note: I am offering one clamping plate for sale. A second, identical clamping plate with the same dimensions is also available. Both plates are exact matches and can be joined together if required to create a larger clamping surface. Bjdpfxezl Hcas Am Tedf The second clamping plate is also available upon request. Please feel free to contact me if you are interested in both plates or have questions regarding their combined installation.