Maszpol

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U Hnodpfx Agsxn Ty Re Nju face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg

Condition: good (used), functionality: fully functional, spindle bore: 95 mm, center height: 450 mm, turning length: 3,000 mm, total length: 6,000 mm, total width: 2,000 mm, total height: 1,900 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, type of input current: three-phase, overall weight: 8,000 kg, three-jaw chuck diameter: 500 mm, With Ø500 mm. selfcentering chuck, 2 steady rests, follow rest, spindle stops, Ø600 mm. 4-jaw independent chuck and lots of equipment. The machine will be serviced before delivery. Hedpjxn Rk Tsfx Ag Njnu

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Hsdpfoxf E Rcsx Ag Nenu Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, turning length 4000 mm turning diameter 850 mm turning dia. in gap 1150 mm turning diameter over slide 520 mm turning speeds 5.0 - 630 U/min quill: 6 MK quill travel 250 mm spindle bore 100 mm workpiece weight max. 4000 kg bed width 600 mm travel -x axis 500 mm travel -z axis 3700 mm rapid traverse X 1800 mm/min rapid traverse Z 3640 mm/min feeds X : 0.04 - 4.8 mm/min feeds Z : 0.08 - 9.6 mm/min Hnsdpfx Agoxabh Ts Nou feeds Z1 : 0.02 - 2.4 mm/min engine output 20.0 kW weight of the machine ca. 6800 kg. dimensions 6150 x 1500 x 1500 mm good / well-maintained condition (!!) original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter: 800 mm, center height: 400 mm, center width: 4,000 mm, turning length: 3,800 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 800 mm Center height: 400 mm Turning length: 3,800 mm Distance between centers: 4,000 mm Max. swing diameter over cross slide: 570 mm Max. swing diameter in gap: 1,130 mm Work spindle Spindle head according to DIN: 55027, size 11, internal taper 20 Spindle diameter at front bearing: 165 mm Spindle bore: 120 mm Face plate diameter: 564 mm Max. chuck diameter: 380 mm Max. spindle speed: 750 rpm Tailstock Quill taper: Morse 6 Quill diameter: 110 mm Max. manual quill stroke: 310 mm Feed rate Longitudinal carriage: 0.092 - 1.590 mm/min Cross slide: 0.046 - 0.795 mm/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6600 x 1850 x 2250 mm Weight: 10,900 kg EQUIPMENT Hnedpjw Rqrwjfx Ag Nou Comprehensive accessory package included.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 520 mm, spindle bore: 71 mm, turning diameter: 800 mm, turning length: 3,000 mm, Swing diameter over bed 800 mm, over support 520 mm Distance between centers 3000 mm Spindle nose size 8, spindle bore 71 mm Speed range 11.2 – 1800 rpm Feed range 0.06 – 13 mm/rev Hnsdpsw Nvzzsfx Ag Neu Metric thread pitch 0.5 – 160 mm Tailstock quill travel 210 mm, mounting MK 6 Main drive 15 kW incl. rapid traverse, fixed steady rest with roller heads Quick-change tool holder Drehblitz with 2 cassettes, Taper turning attachment, HS reducing sleeve 3-axis digital readout Heidenhain ND 970 3-jaw chuck D 315 TOS, manual

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Hnodpfew Ew D Djx Ag Neu Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: used, Year of construction: 1976, turning diameter over cross slide: 470 mm, spindle bore: 130 mm, turning length: 1,500 mm, quill stroke: 300 mm, quill diameter: 130 mm, bed width: 600 mm, rotational speed (max.): 600 rpm, quill mount: MK 6, Manufacturer: EST Ticino Model: ET-BM 400 Turning length: 1,500 mm Swing over bed: Ø 800 mm Swing over slide: 470 mm Swing over gap: Ø 400 mm Gap length: 750 mm Spindle bore: 130 mm Spindle power: 15 kW Bed width: 600 mm Quill diameter: Ø 130 mm Hodpfxjw Ewaro Ag Nonu Quill stroke: 300 mm Spindle mount: 6 MK Spindle speed: 600 rpm Dimensions (approximate) Length: 4,500 mm Width: 1,800 mm Height: 1,800 mm Weight: 5,200 kg With accessories: - Safety equipment - Faceplate, four-jaw chuck, clamping jaws, tool holder, centers, drill chuck, tools Please submit inquiries by email only. All information has been provided to the best of our knowledge. Subject to change. This offer is directed exclusively to businesses within the meaning of § 14 BGB. The sale is made with exclusion of any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller or for injury to life, body, or health. For more information, please visit the Witzenmann GmbH website under the sections “Imprint”, “Terms and Conditions”, and “Data Protection”.

Condition: used, total length: 7,100 mm, total width: 1,500 mm, total height: 1,500 mm, Empty weight: 6.700 kg Price: On request - Drive system: Conventional - Power [kW]: 13.0 - Centre height [mm]: 400 - Swing over bed [mm]: 800 - Distance between centres [mm]: 5000 - Spindle bore [mm]: 103 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 1000 - Options: Removable bed - Swing over removable bed [mm]: 1050 - Documentation available: Yes Hsdow Eu Elopfx Ag Nonu - Serial number: 80097 - Transport dimensions: 7100mm x 1500mm x 1500mm (l x w x h) - Transport weight [kg]: 6700kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min Hsdewwl Izopfx Ag Nenu

Condition: ready for operation (used), Year of construction: 1971, turning diameter over bed 800 mm turning diameter over slide rest 480 mm turning length 3000 mm turning diameter in the slot 850 mm center height over bed 380 mm bed width 550 mm Hedpswwatrefx Ag Njnu spindle head DIN 55022/8 spindle bore 73 mm speeds 18 - 900 U/min feeds 224 / 0,018-10 mm/U thread - mm pitch ca. 84: 0,2 - 224 mm total power requirement 17,5 kW weight of the machine ca. 8,6 t dimensions of the machine ca. 5,5 x 1,8 x 1,72 m Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the motor speed), single-lever control for all support movements, pre-selected feed rates, hardened bed guides, double-tiebar bed for high rigidity, high- positioned front guideway and low-positioned rear guideway in the V-prism for high accuracy, and triple bearings for the lathe spindle, threads in mm, inches and diametrical pitch. The year of manufacture is estimated. Many accessories! Machine dealer with own stock of 1600 m².

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, Geminis lathe model GE 870 of 4000mm between points, turning on bed 870mm, turning on cross slide 580mm, turning on neckline 1100mm, length of neckline 340mm, speeds of 13-1000rpm, diameter of the hole of the shank 84mm, has mounted plate 3 claws diameter 315mm, has plate 4 independent claws of diameter 500mm, has fixed steady rests, lathe in general in good condition. Hnjdpfx Aswqz D Eog Nsu

Condition: excellent (used), Year of construction: 1984, - distance between center / turning length: 5000 mm - turning diameter over bed: 930 mm Hnsdjwnnuxopfx Ag Nju - turning diameter over support: 650 mm

Condition: used, total height: 1,850 mm, total length: 6,300 mm, total width: 1,500 mm, Empty weight: 7.500 kg Price: On request - Drive system: Conventional - Power [kW]: 24.0 - Centre height [mm]: 460 - Swing over bed [mm]: 920 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 76 - Documentation available: No - Serial number: 5328 - Transport dimensions: 6300mm x 1500mm x 1850mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hjdpfx Agewmll Se Njnu VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, Center high 400 mm Swing dia over bed 815 mm Swing dia over cross slide 480 mm Swing dia in bridge 1000 mm Lenght of bridge 300 mm Center distance 3000 mm Max tool crosssection 40 x 40 mm Bed width 490 mm Spindle bore D72 mm Spindle speed range 5,6 - 1120 rpm Metric thread 0,5 - 48 mm Modul thread 0,25 - 24 modul Whitworth thread /inch 48" - 7/16" Diametral thread 96" - 7/8" Circular Pitch thread 1/16" - 3" Tailstock sleeve MK5 Travel of tailstock sleeve 250 mm Weight 5800 kgs Dimensions LxWxH = 4860 x 1360 x 1600 mm Accessories, features - 2 axis DRO system - New D400 mm chuck Hnedewk Nivspfx Ag Neu - Steady rest - Following rest - Rapid speeds on longitudinal and cross slides - Coolant unit - Chuck protection - Working lamp - Manual The machine has been completely overhauled. New electronics, new bearings, new clutches, worn parts replaced and a new paint job. Ready to buy.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Hedpfx Agewk Iq Eo Nsnu Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Year of construction: 2000, . max. swing diameter 460 mm hollow 66 mm digital . multifix . centre distance 1000 mm feed: . weight of the machine ca. 1,8 t +++++ Hnsdpfxjwhqzue Ag Nou Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1951, serial number 13691 3-jaw-chuck diameter 400 mm centre height 450 mm centre distance 2000 mm tail stock ja rapid clamping device 4 seiten Hnsdpswg Ht Dofx Ag Nsu digital readout ja nachgerüstet steady ja

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 1102-139, turning diameter over bed slide: 930 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, torque: 8,500 Nm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: conventional Working area Turning diameter over bed: 930 mm Turning diameter over support: 630 mm Turning length: 2,000 mm Center height over bed: 465 mm Spindle Spindle bore: 95 mm Speeds: 7 - 710 rpm Torque: max. 8,500 Nm Adapters and accessories Faceplate diameter: 800 mm Chuck diameter: 400 mm Hnsdowfhbaspfx Ag Nou MACHINE DETAILS Machine weight: approx. 8,600 kg EQUIPMENT - 1 steady rest

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Hjdpjwd D Itjfx Ag Nsnu

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 Hodewc Dzwspfx Ag Nsnu --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev --> Cross feeds (128): 0.015 - 0.338 mm Rev 3 - jaw chuck Multifix steel holder size B, 1 x inserts 2 x travelling steady rest, Operating instructions

Condition: good (used), Lathe Brand Roewe Type RSN 71 B Hodswb Dr Hepfx Ag Nsnu Center distance 4000 mm Center height 360 mm over offset 470 mm 16 speeds 10-1000 rpm Length 6000 mm Width 1450 mm Height 1600 mm

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 660 mm, turning diameter over bed slide: 900 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, overall weight: 7,000 kg, Poreba TPK 90A1/2M Hnodpfx Agowbd Dvj Nsu Chuck 800 mm 2000mm between Centres Swing over bed 900 mm Swing over saddle 660 mm Spindle Speed 710 rpm Weight 7000 kg approx.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 95 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, quill diameter: 130 mm, total length: 4,500 mm, total width: 1,750 mm, total height: 1,435 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 5,600 kg, disc diameter: 800 mm, quill mount: MK 6, workpiece weight (max.): 9,000 kg, spindle mount: MK 6, TPK 90 x 2000mm lathe. Manufactured in PORĘBA (PL) - 1985. Renovation 2018. Readings in 3 axes XYZ. Turning diameter over bed 930 mm. Turning diameter over support 630 mm. Turning diameter in bridge 1200 mm. Spindle through hole 95 mm. Hnedpfx Agswa S Awj Nsu Spindle speed range 8-800 rpm. Support feed range 80: - longitudinal 0.1 - 12.8 mm/rev. - transverse 0.05 - 6.4 mm/rev. 2-speed motor 15/22 kW. Internal Morse taper 6. Weight of the workpiece: - in the chuck 800 kg, - in the centers 6000 kg, - with 1 steady rest 7500 kg, - with 2 steady rests 9000 kg, Max. turning length in the centers 2000 mm. Upper drawer travel 300 mm. Dimensions (length X width X height) 4500 x 1750 x 1435 mm. Weight 5600 kg. Equipment plan-shaft 800 mm, eyepiece 600 mm, half-eyepiece 250 mm.

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 900 mm, turning length: 4,000 mm, GURUTZPE lathe model Super A, 4,000 mm between centers, swing on bed 920 mm, on carriage 600 mm, in the neckline 1170 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 1 fixed and 1 mobile rest. Hjdpfx Agov Rm Rfs Nonu