Werner Windeler Vermietung und Verpachtung

Condition: excellent (used), Panhans tenoning carriage with clamping device for use on table milling machines. Manufacturer is Panhans, but it was mounted on a Martin Schenk spindle moulder. Base plate length approx. 1000mm Sliding travel approx. 710mm Eccentric clamp for securing workpieces Tilting fence Hodpsxb Sy Ajfx Aacow The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "more offers from this supplier."

Condition: like new (used), Tool cabinet with approx. 130 CNC tools, including tool holders (HSK/SK40), milling cutters, drills, taps, boring tools, as well as special tools and face mills. Hedpfx Aajxap H Djcow

Condition: used, Lot (approximately 30 pieces) of various cutters and cutter combinations, primarily from Leitz for MEC feed or without markings. Hsdpfx Asw U Ay Isacow mark: Without or MEC

Condition: used, spindle diameter: 40 mm clamping length: about 170 mm Hjdpfjw Uy Naex Aacjw

Condition: like new (used), STARK Profile Cutter Set 119 pieces, New, partially in original packaging Article number: JA_G250801 Description / Itemized list 82451 8 94011 6 600130 10 62061 9 37911 6 108611 3 108511 3 108581 6 98671 4 108601 6 53421 2 600604 1 600601 2 600607 16 600608 4 600706 7 602029 4 602062 2 602063 3 8602034 2 8602035 2 8602036 2 8602037 2 8602038 2 8602039 2 6002.06 5 Note – Used Equipment: • Prices are listed as ex works (unless stated otherwise!) from our location in Ottendorf-Okrilla, Germany – free loaded (unless otherwise specified). • Subject to prior sale! • You will receive an invoice showing VAT (MwSt.). • All items are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect items at our location. • Our general terms and conditions apply. • Special agreements are only valid if confirmed in writing. • Any items visible in the background of images are not included in the offer. • Saw blades are shown for display purposes only and are not included in the delivery scope. Shipping options: • We are happy to provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is free of charge by prior arrangement. (Assembly and product demonstration are available optionally upon request!) • Delivery may be partially disassembled. Hjdow Tlrkopfx Aacjw • Optionally, our qualified service staff can install the machine at your site and provide a brief introduction. Travel, transport, and service time charges apply.

Condition: like new (used), Martin Quick-Clamping Nut for 40mm Milling Arbor. Hedewnnauspfx Aacsw From stock, apparently has never been used. The quick-clamping nut is used for the T27. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: like new (used), 40mm Milling Arbor for Martin Tilting Spindle Moulder T27 Clamping length 160mm, arbor diameter 40mm. With quick-clamping nut. From stock, apparently has never been used. Hodpfxswnm U Re Aacew Milling arbor is only suitable for T27, not for T26. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: used, No. 3203 Milling tool Leitz, Oppold Used Consisting of: 2x Leitz milling cutters, 1 of them unused 4x milling disks green 6x Oppold profile cutters - 2 x Leitz milling cutters, 1 of them unused Inner Ø 60 mm, outer Ø 170 mm, height 40 mm - 4 x milling disks green Inner Ø 35 mm, outer Ø 90 - 120 mm, height approx. 25 mm Hodpfx Asv Dutnjacow - 6 x Oppold profile cutters inner Ø 30 mm, outer Ø 120 mm, height 25 mm Sale on behalf of the customer, from location near 73430 Aalen Shipping by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 3201 Milling tool Stehle, Wigo Used Consisting of: 1 x profile cutter head Stehle 525 1 x profile cutter head Wigo no. 2047 1 x profile cutter head Wigo no. 1243 1 x profile cutter head Stehle 525 122 x 60 x 40 mm With interchangeable knives Approx. 16 profile knives 1 x profile cutter head Wigo no. 2047 120 x 40 x 40 mm With interchangeable blade 1 x profile cutter head Wigo no. 1243 120 x 40 x 40 mm With interchangeable blade Sale on behalf of customer, from location near 73430 Aalen Shipping by us optionally possible Errors in the description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Hjdpfx Asv A U Nmoacow Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 3200 Milling tool Stehle, Leitz Used Consisting of: 1 x profile cutter head Stehle 525 1 x profile cutter Leitz A7 SLS, 180 x 50 x 250 1 x profile cutter head Leitz no. 232 1 x profile cutter head Leitz 1 x Leitz - Profile cutter head Stehle 525 122 x 60 x 40 mm With interchangeable knives Approx. 20 profile knives - Profile cutter Leitz A7 SLS 180 x 50 x 250 mm - Profile cutter head Leitz no. 232 80 x 80 x 30 mm With interchangeable cutter - Profile cutter head Leitz 100 x 80 x 35 mm - Leitz approx. 145 x 40 x 60 mm Composed of 2 disks Sale on behalf of customer, from location near 73430 Aalen Shipping by us optionally possible Subject to errors in description and price Hjdpev A U A Hjfx Aacsw To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Protective hood for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum milling diameter 160mm With brush and feed wedge Obviously has not been used much so far. Hedpfxsvz Dr Is Aacow The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this supplier".

Condition: used, hole spacing: 320 mm Hodpfxsvyq Tio Aacow stop length: 700 mm table size: 460 x 220 mm

Condition: new, Safety stop plate set 208 For attachment to existing milling stops. The set consists of: 2 cast stop plates 430 mm long 2 groove profile rails 2 wooden splinter tongues 2 rulers 260 x 6 mm 3 rulers 260 x 3 mm 1 wooden groove board 8 steel sliding blocks with screws 10 rotating brass sliding blocks with screws 1 Allen key 2 clamping eccentrics approx. 22.6 kg Hsdpfx Aevxr Tnsacew

Year of construction: 1996, condition: used, with multiplex fence plates wood newused, good conditionmake Schneideryear of manufacture 1996milling fence with fine adjustmentnew price approx. 2,500.00 EURsuction connection D 120 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as viewed,without guarantee and warranty Hsdpfsvxr Ncox Aacew

Condition: used, used, good conditionJaw length right 600 mmJaw length left 450 mmcast stop jawsStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Hodpfx Aevwf Ddeacsw

Condition: used, thickness of jaw 500 mm Hodpfsvwftfex Aacow Milling fence for table milling machineswith new wooden fence jaws for self-mountingfence jaws are supplied and only need to be adjustedjaw length 500 mmmilling fence with fine adjustmentstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee

Condition: used, Make TAPOAas new- for the accident-proof milling of curved workpieces on the table milling machine- for tools up to Ø 160 mm- with pressure and protective ring,- with fine adjustment of the milling depth- suction nozzle Ø 120 mm- the curved milling fence can be attached and adjusted on any bench-type milling machine- workpieces can be processed in both left-hand and right-hand rotation- the transparent protective cover allows an optimum view of the toolStorage location 97447 Gerolzhofen, free loading, unpackedHandover in as-is condition as inspected,without guarantee and warranty Hsdpfxovwfk Do Aacow

Condition: excellent (used), Protective cover for milling curved parts on the ring etc. Hjdpjt Ixikjfx Aacew This protective device is often recommended by the BG. Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. Year of manufacture unknown The machine can be demonstrated on site by appointment. We only offer only offer machines that are ready for demonstration in our warehouse, see "other offers from this offerer".

Year of construction: 2021, condition: like new (used), Protective cover for milling curved parts on the ring etc. Hedpfx Aet Ixhgsacsw This protective device is often recommended by the BG. Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. The machine can be demonstrated on site by appointment. We only offer only machines that are ready for demonstration in our warehouse, see "other offers from this supplier". offerer".

Condition: used, functionality: fully functional, SK 30 ISO 30 Collet chuck LEUCO with gear rim A=72mm with shank tool HM-WPL Router cutter D=20 mm x NL=55 mm, Z1+1 Unused, but sold as used. The collet chuck with gear rim for CNC applications for the renowned manufacturer SCM Morbidelli offers a tool holder according to ISO 30 standard. The base body is manufactured in a precision design, hardened, ground and finely balanced. The steep taper design complies with ISO standards. Too expensive ? Take a look at our webshop !!! Other dimensions ? Have a look in our webshop !!! Note: The rights to the images are owned by Gerhard Sondermann GmbH and will be prosecuted in case of misuse Hodpferckgxex Aacsw

Condition: used, drilling: 30 mm Outer diameter: 140 mm width: 50 mm v-ledge: 18 x 4 mm Labelling: BG test Hjdpfx Ajmt S Iisacsw feed: MAN n max: 9000 overall length: 390 mm

Condition: used, complete with tenon cutting slide. - Eccentric clamping device - adjustable telescopic fence with 1 positionable stop Hedpfeii Rpxjx Aacsw - tenon cutting guard with suction hood

Condition: used, End mills, end mills, milling cutters, groove milling cutters, wood milling cutters -Double cutter -Roughing and finishing cutter -4x: cutter Ø 4 x12 mm -7x: cutter Ø 5 x 12 mm -10x: cutter Ø 6 x 14 mm -1x: cutter Ø 8 x 20 mm -5x: milling cutter Ø 10 x 20 mm -4x: cutter Ø 11 x 22 mm -3x: cutter Ø 12 x 22 -Take: Ø 10 mm -Type: M623 -Number: 34 pieces Hjdpfxeb D I Axo Aacsw -Sale: only completely -Weight: 3.6 kg

Condition: used, Drill head, drill bit, milling cutter -1x recording drawing with the photos -Mill 5x: Ø 16 x 40 carbide tipped -Cutter 2x: Ø 15 x 40 carbide tipped -Cutter 2x: Ø 14 x 40 carbide tipped Hjdpjb D I A Nsfx Aacjw -Cutter 2x: Ø 12 x 40 carbide tipped -in wooden box -Dimensions: 250/175/H75 mm -Weight: 2.7 kg

Condition: used, Wood milling inserts, knife inserts, form milling inserts -Blade width: 40 mm -Blade thickness: 2 mm -Price: complete -Weight: 0.3kg Hsdpfx Aaeb A Sugocsw