Streicher Maschinenbau GmbH

Condition: good (used), Year of construction: 1989, functionality: fully functional, Turning diameter on the table: 300 mm Distance between centers: 1,000 mm Max. external grinding diameter with 355 mm wheel: 270 mm Max. external grinding diameter with 405 mm wheel: 220 mm Max. external grinding diameter with 510 mm wheel: 115 mm Max. workpiece weight between centers: 130 kg Csdpszi Dvxefx Aphsrd Grinding headstock Swivel angle left/right: +/- 30° Standard wheel dimensions: 355 x 152.4 mm Special wheel dimensions: 405 x 152.4 mm Standard wheel width: 25-50 mm Special wheel width: 100 mm Handwheel feed rate per division: 0.0025 mm Automatic infeed speed: 0.02-1.5 mm/min Automatic feed speed during surface grinding: 0.001-0.1 mm/min Workpiece headstock Swivel angle: 120° Spindle speed, 50 Hz: 24-302 rpm Spindle speed, 60 Hz: 29-363 rpm Taper of the center: MK 4

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Cedpfx Apjzilx Ushjrd Diamond system Voltage: 380 V Dimensions (L x W x H): 3500 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: used, Year of construction: 2003, functionality: fully functional, Control system: Siemens Sinumerik 840D Crsdpfjzh Ux Ijx Aphjd Includes: Grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine. Technical data: Center distance: 600 mm, Center height: 180 mm Maximum grinding diameter: 355 mm Maximum workpiece weight: 150 kg Maximum Z-axis speed: 11 m/min Minimum Z-axis speed: 0.01 m/min Maximum X-axis speed: 7.5 m/min Minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, Lubricating oil: 30 liters, Hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system includes: grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine Technical data: Crsdpozh Uwqefx Aphod Center distance: 600 mm, center height: 180 mm maximum grinding diameter: 355 mm maximum workpiece weight: 150 kg maximum Z-axis speed: 11 m/min minimum Z-axis speed: 0.01 m/min maximum X-axis speed: 7.5 m/min minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle stock: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 2001, functionality: fully functional, Control system: Siemens Sinumerik 840D Includes: Grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine. Technical data: Center distance: 600 mm, Center height: 180 mm Maximum grinding diameter: 355 mm Maximum workpiece weight: 150 kg Maximum Z-axis speed: 11 m/min Minimum Z-axis speed: 0.01 m/min Maximum X-axis speed: 7.5 m/min Crodpezh Uvtofx Aphod Minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, Lubricating oil: 30 liters, Hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system includes: grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine Technical data: Center distance: 600 mm, center height: 180 mm maximum grinding diameter: 355 mm maximum workpiece weight: 150 kg maximum Z-axis speed: 11 m/min minimum Z-axis speed: 0.01 m/min maximum X-axis speed: 7.5 m/min minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Cjdpfx Apezh Uvaohord Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle stock: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle Crodpfx Apezhma Dohsd - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840 Dsl Grinding length : 1000 mm In General: Year of manufacture:2017 Control system:Siemens 840 Dsl Centre height:180 mm Centre distance:1,000 mm Maximum workpiece weight:150 kg X-Axis: Technology:Electromechanical Transverse speed:0.001 – 8,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) Guideway:Hydrostatic Z-Axis: Technology:Electromechanical Table speed:0.01 – 12,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) B-Axis: Crjdpozhdybsfx Aphod Technology:Continuously swivelling axis Resolution:0.001° Clamping:Hydropneumatic Workpiece spindle: Power:2.0 kW Speed:0–600 rpm Chuck:MK 5 and KK 5 C-axis:0.001° Grinding spindle: Disc configuration:left/right Power:9 kW Speed:1,400 rpm Internal grinding spindle: Power:2.2 kW Speed:60,000 rpm Tail stock: Quill stroke:40 mm Mounting:MK 4 Quill retraction:Hydraulic Cylinder fine adjustment:Yes Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Grinding wheel dresser:Diamond dressing tile Technology option I:Cone grinding Technology option II:Out-of-round grinding Balancing system:Automatic Grinding detection:Via structure-borne sound Workpiece measurement:Linear encoder Accessories:Various flanges, discs and mandrels

Condition: good (used), Year of construction: 2021, operating hours: 5,500 h, grinding length: 600 mm, grinding diameter: 440 mm, feed length X-axis: 325 mm, feed length Z-axis: 750 mm, Control system, serial number and main data o Control system: SIEMENS, Type 840 D SL o Operating hours recorded: 5,475 Travel ranges o X-axis travel: 325 mm Crjdpfszgdtlex Aphod o Z-axis travel: 750 mm Axis speeds o X and Z axes max.: 15,000 mm/min o X and Z axes min.: 0.01 mm/min Working area o Max. grinding length: 600 mm o Max. grinding diameter: 440 mm o Min. grinding diameter: 10 mm Performance data o Grinding spindle: 1 tool for external cylindrical grinding o Tool dimensions: Ø 610 x 160 x 304.8 mm o Cutting speed: 60 m/s o Power: 15 kW Workpiece spindle o Speed range: 30 - 5,000 min⁻¹ o Taper: 5 Morse Tailstock o Design: pneumatic o Max. quill stroke: 80 mm o Taper: 5 Morse Connection values o 400 V / 50 Hz / 71 A / 43 kW Automation / Peripherals • Handling robot, YASKAWA, Type YR-1-06VXH12-A00, year of manufacture 2022, serial number 6V2272528290001 • Automation system / workpiece storage, EGS AUTOMATION DANOBAT, Type CG600-BL1, year of manufacture 2023, serial number 190605-6, 2-position • Filter, 3FS, Type M1600, No. 565209, year of manufacture 2021, weight 85 kg • Oil band filter, MICROFILTER, Type EASYBAND 150, serial number 0202, year of manufacture 2021 • Pump, REXROTH, Type HM-46

Condition: good (used), Year of construction: 2022, operating hours: 7,400 h, machine/vehicle number: 100644, grinding length: 600 mm, workpiece length between centers: 600 mm, feed length X-axis: 650 mm, feed length Z-axis: 1,000 mm, overall weight: 10,000 kg, j.stumpf [at] ivg.auction Control, monitoring, and operating data o NC control: SIEMENS, Type 840 D SL o Year of manufacture: 2022 Credpfx Ajzgbw Iophjd o Serial number: 100644 o Recorded operating hours: 7,315 o Monitoring system: MARPOSS, Type P7 Travel distances o X-axis: 650 mm o Z-axis: 1,000 mm Axis speeds o X and Z axes max.: 15,000 mm/min o X and Z axes min.: 0.01 mm/min Working area o Max. grinding length: 600 mm o Center distance: 225 mm Performance data o Grinding spindle: 1 tool for external cylindrical grinding o Tool dimensions: Ø 760 x 250 x Ø 304.8 mm o Cutting speed: 60 m/s o Power: 30 kW o Max. grinding wheel speed according to text: approx. 80 m/s Workpiece spindle o Axis speed: 5 - 1,000 min⁻¹ o Taper: 5 Morse o Motor torque: 16 N.m Tailstock & tool post o Taper: 5 Morse o Max. tailstock quill travel: 80 mm o Diamond grinding wheel profiling tool Saddle drives o Torque motor X-axis: 28 N.m o Torque motor Z-axis: 16 N.m Operating data o Year of manufacture: 2022 o Recorded operating hours: 7,315 o Operating pressure: approx. 6 bar General data o 3 x 400 VAC / 50 Hz / 72 kW / 119 A o Weight: 10,000 kg Peripherals • Automated workpiece removal station, JOVI, Type 1113B, year of manufacture 2022, weight approx. 300 kg • Air filter unit, IFS, Type M 1600, year of manufacture 2022, serial no. 567663, weight approx. 85 kg, connection power 380 - 460 V, 50 / 60 Hz, 0.7 kW, 1.5 - 2.1 A • Hydraulic unit, REXROTH, Type Deposito HE-16120 • Coolant filter unit, MICRONFILTER, Type EASY 250 / KMT350, year of manufacture 2022, serial no. 0201, tank volume approx. 2,300 l, connection power 400 V / 50 Hz, 2.44 kW • Immersion cooler, HASCH, Type MCS-120ST-05AOP6R7S7UZ1-3405C, year of manufacture 2022, serial no. 1003220300954, weight approx. 206 kg • Magnetic separator, MICRONFILTER, Type KMT350, serial no. 0211 • Tool loading unit, DANOBAT, Type rotary table lift, year of manufacture 2022, serial no. 3130490901, weight approx. 350 kg, max. load capacity approx. 360 kg

Condition: good (used), Year of construction: 2022, operating hours: 2,800 h, grinding length: 600 mm, grinding wheel diameter: 450 mm, total width: 3,300 mm, total length: 2,900 mm, total height: 1,900 mm, grinding diameter: 290 mm, quill stroke: 80 mm, distance between centers: 600 mm, grinding wheel width: 50 mm, feed length X-axis: 300 mm, feed length Z-axis: 800 mm, grinding spindle motor power: 25,000 W, grinding spindle speed: 4,500 rpm, j.stumpf [at] ivg.auction Technical Data Year of manufacture, serial number, and operating hours o Year of manufacture: 2022 o Operating hours recorded: 2,737 Control and monitoring o Control: SIEMENS, Type SINUMERIK o Monitoring system: MARPOSS, Type P7 Travel distances o X-axis: 300 mm o Z-axis: 800 mm Axis speeds o X and Z axes max.: 15,000 mm/min o X and Z axes min.: 0.010 mm/min Work area o Max. grinding length: 600 mm o Center height above the table: 150 mm o Max. diameter of oscillation above the table: 290 mm o Workpiece weight: approx. 50 kg Performance data o Grinding wheel speed: up to 120 m/s o Max. grinding wheel dimensions: Ø 450 x 50 mm o Workpiece spindle speed: 30 - 2,000 rpm o Grinding wheel drive: 25 kW / 70 Nm / max. 4,500 min⁻¹ o Workpiece spindle: 15 kW / 24 Nm / max. 5,000 min⁻¹ Hydraulic steady rest and dresser o Arbor taper: MK4 o Max. quill stroke: 80 mm o Diamond dressing disc, outer Ø 100 mm Workpiece spindle o Arbor taper: MK5 Operating data & connection values o Operating hours recorded: 2,737 Machine connection values o 3 x 400 VAC / 50 Hz / 58 kW / 97 A Dimensions / footprint o Required footprint (L x W x H): 2,810 x 3,300 x 1,900 mm Peripherals • Automated workpiece removal station, JOVI, Type 1113A, year of manufacture 2022, weight approx. 300 kg • Air filter unit, IFS, Type VARIO M 2000, serial no. 568113, year of manufacture 2022, weight approx. 120 kg, connection power 400/460 V, 50/60 Hz, 0.7 kW, 1.7/1.6 A • Water cooling unit, HASCH, Type MCW-50CT-17AUZ1-3407C, serial no. 1001220302582, year of manufacture 2022, weight approx. 150 kg, tank volume approx. 15 l • Coolant filter system, MICRONFILTER, Type EASY 250 / KMT350, serial no. 0201, year of manufacture 2022, tank volume approx. 2,300 l, connection power 400 V / 50 Hz, 5.34 kW • Immersion cooler, HASCH, Type MCS-120ST-05AOP6R7S6UZ1-3407C, serial no. 1003220400836, year of manufacture 2022, weight approx. 206 kg • Coolant tank, MICRONFILTER, Type VR200L / MIN-150L, serial no. 0201, year of manufacture 2022, tank volume approx. 150 l, connection power 400 V / 50 Hz, 1.1 kW • Separating magnet, MICRONFILTER, Type KMT350, serial no. 0212 Crsdpfx Apezgan Sshed • Loading unit, DANOBAT, Type rotary table lift, serial no. 3810490908, year of manufacture 2022, weight approx. 170 kg, max. load capacity approx. 230 kg • Rotary table trolley, year of manufacture 2022, serial number 110000503

Condition: used, TECHNICAL DETAILS - Distance between centers : 600 [mm] - center height : 125 [mm] - Table orientation : 11 [°] GRINDING WHEEL HOLDER HEADSTOCK Cjdpfxjzf Rcds Apherd - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK - Internal cone : MT4 - Quill stroke : 30 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2580 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2200 [kg] EQUIPMENT - Coolant tank * with paper filtering unit - 1 internal grinding spindle - Lubricating tank with pump - 1 three-key steady rest - 1 inner spindle alignment device

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: LEAN PRO, FANUC 16 T FULLY FUNCTIONAL Credpfozfx D Nsx Aphsd RANGE OF ACCESSORIES FILTRATION SYSTEM MIST EXTRACTOR MACHINE MANUALS

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - center height : 175 [mm] - Table orientation : 9 [°] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] - Boring for internal spindle : 90 [mm] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK - Internal cone : Morse 3 - Quill stroke : 30 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2860 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT Codpszfqzasfx Apherd - Automatic cycle work (rough part, finishing and reverse) - Kelco 5 display - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 5400 [rpm] - Chuck 4 jaws - 1 three-key steady rest - Set of wheels

Condition: good (used), Year of construction: 1996, functionality: fully functional, grinding length: 1,000 mm, External cylindrical grinding machine KARSTENS K29 Year of manufacture: 1996 The machine underwent a complete mechanical overhaul in 2022. Invoices are available. Cjdpfx Aezfgvaophjrd Grinding length: 1,000 mm Grinding diameter: Accessories: - Coolant system - Various grinding wheels - Measuring probe Further details to follow.

Condition: used, External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group Crodpfx Apozd Um Rshod External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Cedpfx Apozc D Dqjherd Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Csdpfx Aszc D Dkjphsrd Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Cjdpfx Apezcwfnshord Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 027.0149, CNC internal and external cylindrical grinding machine S33 CNC – undergoing refurbishment. Delivery time: approximately 14 weeks. Technical data and accessories as per the attached PDF. Photo = sample photo only. Crodpfezcuwbjx Aphjd

Condition: good (used), functionality: fully functional, Stanko 3A151 Cylindrical Grinding Machine For sale is a high-quality cylindrical grinding machine, type Stanko 3A151. The machine is suitable for the precise external cylindrical grinding of cylindrical workpieces as well as flat cones and is ideal for use in workshops, toolmaking, series production, and maintenance. Technical data: Max. workpiece diameter: 200 mm Max. workpiece length: 700 mm Max. grinding length: 630 mm Center height: 110 mm Max. workpiece weight: 30 kg Table travel: 650 mm Continuously adjustable table speed: 100–6000 mm/min Grinding wheel diameter: 450–600 mm Max. grinding wheel width: 63 mm Grinding spindle speed: 1112 / 1272 rpm Workpiece spindle speed: continuously adjustable 63–400 rpm Travel of grinding head: 200 mm Main drive grinding spindle: 7.5 kW Number of electric motors: 7 Machine dimensions (L × W × H): 3100 × 2100 × 1500 mm Machine weight: approx. 4,200 kg Equipment and features: Hydraulic table drive Automatic and manual transverse feed Rapid traverse of the grinding head Hydraulic tailstock quill Cooling system Crjdpfx Aszcg H Iephod Lubrication system Magnetic separator Suitable for longitudinal and plunge grinding High precision and robust industrial design Condition The machine is in technically perfect condition. It is ready for immediate use and impresses with its robust construction and high grinding accuracy. Inspection and test run possible by appointment. Available from week 30.

Condition: refurbished (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, center height: 180 mm, workpiece weight (max.): 200 kg, grinding length: 1,000 mm, center width: 1,000 mm, grinding wheel diameter: 500 mm, total width: 2,600 mm, total length: 4,700 mm, total height: 2,200 mm, grinding diameter: 300 mm, workpiece weight between centers: 200,000 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 1,000 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 10 rpm, feed length X-axis: 320 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,500 m/min, grinding spindle speed: 1,700 rpm, overall weight: 7,500 kg, pivoting range: 30 °, warranty duration: 12 months, year of last overhaul: 2023, input frequency: 50 Hz, rapid traverse X-axis: 1,000 m/min, rapid traverse Z-axis: 1,500 m/min, input voltage: 400 V, Schaudt PF43 U1000, manufactured in 1994, retrofitted (premium refurbished) by GSN in 2023. Siemens Sinumerik 840 D SL control system. Low operating hours, approximately 3000 hours since the retrofit. MK4 workpiece spindle, MK4 tailstock. Grinding travel: 300mm Workpiece length, including clamping devices, at maximum grinding travel: 450mm Grinding wheel dimensions: 500x100mm Bore diameter: 203.2mm Controlled workpiece circumferential speed (WUG) SUG external cylindrical grinding spindle: 45m/s Freely positionable, automatic B-axis Machine with new, fully enclosed splash guard GSN measuring head Diatronic 22 including C2 and W axes/turret Touch probe sensor with hydrophone (water jet) including collision monitoring Tailstock retrofitted with automatic cylinder error compensation Crodpfxszcfnqj Aphod Clamping/unclamping adjustable via hydraulic clamping device Upgrade to a 15" screen on the control panel NEW PRICE GROSS 2023: €407,432.20 plus additional tools, etc.

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal cylindrical grinding machine – Year of manufacture: 2020 A used EMAG WEISS W11 CNC SL650 is available for sale – a high-performance universal cylindrical grinding machine with CNC control. The machine is ideally suited for demanding grinding tasks on individual parts, prototypes, and small to medium production runs. Machine specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of manufacture: 2020 Operating hours: approx. 6,850 spindle hours / approx. 20,422 operating hours Condition: Used, well-maintained, ready for immediate use Cedpfjzcfgmjx Aphord Technical data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. grinding length: 650 mm (between centers) Center height: approx. 200 mm External grinding diameter: up to approx. 390 mm Max. workpiece weight (overhang): approx. 100 kg (MK4) Max. workpiece weight between centers: approx. 250 kg X-axis travel: approx. 380 mm Z-axis travel: approx. 1,150 mm Grinding wheel diameter: 400 – 500 mm, depending on configuration Rated power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral speed: 20 – 50 m/s Features and performance characteristics CNC touchscreen operation with a Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: the machine can be operated both conventionally and with CNC control High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic grinding wheel truing with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on configuration) Preparation for automation / robot interface is possible The machine can be inspected in operation by appointment. Subject to changes, errors and prior sale!

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 011.257.90.043, center height: 175 mm, center width: 1,000 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Maximum turning height: 175 mm Credpfx Apozb Hxnohod Maximum turning diameter: 1,000 mm Longitudinal slide Maximum longitudinal slide travel: 1,050 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm Table tilt: max. 8.5° Cross slide Maximum cross slide travel: 275 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm MACHINE DETAILS Control system manufacturer: Fanuc EQUIPMENT - Internal grinding attachment

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 019.3790, Machine undergoing repair/overhaul = estimated delivery time approximately 8-10 weeks. Technical data + accessories, see separate PDF. Crjdpezbqzasfx Aphjd