Used Newton 25 for sale (15,204)

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: iTNC640, table width: 800 mm, table length: 2,700 mm, rotary table diameter: 700 mm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DEMONSTRATION MACHINE This 5-axis machining center enables the complete machining of long components without the need for re-clamping. It is designed to ensure a high degree of dynamics and speed, despite its high stability and rigidity. The cross slide, traveling column, and bed are made of a steel/welded construction. The large tool magazine, connected to the column, ensures short tool change times. The machining center, "made in Italy," is equipped exclusively with European quality components. Special equipment for the demonstration machine: Kessler milling spindle SK40, 60-position tool magazine, air through the spindle, flushing gun for cleaning the work area (including its own pump), Heidenhain TS460 wireless measuring probe (workpiece measurement), BLUM laser tool measurement, Heidenhain automatic kinematic control, rotating control panel, 25 bar internal coolant system, interface for KNOLL filter system, oil mist extraction Bwsdpfx Aioz D Eruewjw Available for immediate delivery. While supplies last.

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Bodsz Rqmrepfx Aiwjww Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion system connected by a torsion bar to grant a planar movement of the movable press platen. Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork. Bjdpfx Aio Ad Hatjwjww

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 10 M Long x 2.5 M Diameter 50mm Round Holes, 8mm Thick Bodpfxjzzrwbe Aiweww All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of tool changer positions: 16 Bwodpozvwnbefx Aiwsw

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical insulating glass production line for max. glass sizes : 3500 x 2500 mm working size : from right to left min. glas size : 380 x 150 mm glass thikness : 2,3 - 17 mm IG element thikness : 12-60 mm - vertical glasswashing machine with 6 brushes - frame setting station Bwodpfx Ao Ahyaajiwsw - gasfilling press - tilting station - vertical sealing robot - butylextruder LBH 25 V - frame bending machine BSV 30 K , max. frame : 4400 x 2200 mm , min. 240 x 170 mm alu-steel , chromatec ultra , workign direction from left to right - desiccant filling machine A1RL max. frame : 2500 x 1200 mm , min. 150 x 150 mm , for alu spacer 6-24 mm

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 250 mm, stroke length: 250 mm, throat depth: 365 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 450 mm Z-axis travel: 250 mm Stroke: max. 250 mm Overhang: max. 365 mm Table diameter: 500 mm Table length: 500 mm Table width: 500 mm Table depth: 500 mm Bwedpfj Af Hdbsx Aiwsw MACHINE DETAILS Control system: Conventional Model: Vertical Number of axes: 3 Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,600 x 2,350 mm Net weight: 3,000 kg Number of transport packages: 1

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle mount: MK 3, Meyer Geared Head Pillar Drill Model:SR25 Spindle Taper: No 3 Morse Spindle Speeds:125-2825 RPM Table Area:350 x 400mm (Hand rise and fall / Swivel) Throat:240mm Motor: 0.75 KW With: Chuck Guard Safety Brake Low-Voltage Light Dimensions: 700 x 450 x 1900mm High Bjdpfx Aiozrnndjwoww Weight: 400 KGS

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11.878, Year of construction: 2008, operating hours: 24,200 h, load capacity: 2,000 kg, lifting height: 4,720 mm, free lift: 1,590 mm, mast type: triplex, fork length: 1,090 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,720 mm Free lift: 1,590 mm Bwjdpe Af Hg Njfx Aiwew Load capacity: 2,000 kg Fork length: 1,090 mm Fork width: max. 970 mm Fork width: min. 250 mm MACHINE DETAILS Mast type: Triplex Fuel type: Liquefied petroleum gas (LPG) Engine manufacturer: Toyota Dimensions & Weight Dimensions (L x W x H): 3,640 x 1,150 x 2,130 mm Unladen weight: 3,864 kg Operating hours: 24,200 h EQUIPMENT Side shift Work lights CE marking Documentation

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. Bjdpe Ahkkhsfx Aiwsww ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: used, functionality: fully functional, turning diameter over bed slide: 2,500 mm, total length: 3,750 mm, total width: 850 mm, total height: 1,350 mm, spindle speed (max.): 1,000 rpm, Global Nordic 25 lathe. Equipped with a three-jaw chuck, a four-jaw chuck, an eccentric four-jaw chuck, and various drills. 18 speeds. Bedpfx Ae Aa Iygsiweww Hollow spindle, 78 mm. Speed n=rpm 12.5. 400V.

Condition: good (used), Dean Smith & Grace Type 25 x 120 Lathe Bsdpfx Aoz S Adlsiwsww Excellent condition. 120" between centres 25" swing DRO 3 Steadies included 4 Jaw Chuck

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, pressing force: 80 t, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bwedeyzy D Ejpfx Aiwew Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: used, functionality: fully functional, Year of construction: 2007, Used 3-meter guillotine shears from HM Type: MPS 30 25 Capacity: 3100 x 2.5 mm (steel) Mechanically driven (40 strokes/min) Bwedpfx Aio Ahgtxewjw Adjustable back gauge Year of manufacture: 2007

Year of construction: 2012, condition: used, An egg breaking machine is offered. Processing capacity: 900-9000 eggs/hour. Controls: control panel with start/stop buttons, speed controller and display. Equipped with a two-row egg breaking system, roller feeder and mobile base frame. Inspection possible by arrangement. Bwodpfo Ahq Nnsx Aiwow

Condition: excellent (used), Eccentric press Inv. No. 3945 Manufacturer: Ter Hart Type: EP 25 * Pressing force: 25 tons * Stroke adjustment: 6 - 60 mm * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 275 mm Bwjdpfe Af Uuxex Aiwow * Overhang: 180 mm * Foot pedal operation * Weight: 750 kg

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Bsdez Ih A Depfx Aiweww Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: ready for operation (used), Year of construction: 2008, Available immediately ex-works: CNC press brake AMADA Type HFT 80 - 25 Year of manufacture 2008 Touchscreen control Pressing force 80 tons Working length 2570 mm Distance between uprights 2125 mm Overhang 420 mm Approach speed 100 mm/s Working speed 10 mm/s Retraction speed 100 mm/s Stroke 200 mm Overhang 420 mm Bwodpfj Afcmxex Aiwow Drive power 9 kW Weight 5750 kg Complete set of tooling Price: EUR 19,500.00 plus VAT, ex-works.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Bodpfx Aio Adzr Rewoww Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Machine type: Press brake Performance Data Press force: 800 kN Press force: 80 t Working length: 2,550 mm Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Rated current: 29 A MACHINE DETAILS Dimensions Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Infratirea Oradea Type: FUS 25 Year of manufacture: 1986 Machine number: 2,628 WORKING AREA Travel X-axis: approx. 400 mm Travel Y-axis: 300 mm Travel Z-axis: 300 mm TABLE Table dimensions: 860 × 400 mm Number of slots: 6 SPINDLE Tool holder: SK 40 MACHINE DETAILS ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,200 mm Height: 1,800 mm Weight: 1,000 kg EQUIPMENT Bjdpfx Aie Ad Avwswsww 3-axis digital display Mounted machine vise Vise jaw width: 160 mm

Condition: used, Year of construction: 2010, operating hours: 11,658 h, travel distance X-axis: 150 mm, travel distance Z-axis: 470 mm, CNC Lathe Manufacturer: CMZ Model: TC 25 BTY Year of manufacture: 2010 Control system: FANUC Series 31i-Model A Technical details: X-axis: 150 mm Z-axis: 470 mm Number of tool stations: 16 positions Operating hours: approx. 11,658 h Condition: Used Technical features & accessories: - 360° C-axis - Chip conveyor - Filtration system Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Bwedpfsz St S Tox Aiwow Subject to modifications, errors in technical data and specifications, and prior sale!

Condition: used, functionality: fully functional, Sine table with electromagnetic clamping plate Bjdpfx Aioz Rwbveweww 600x250x150 mm including control unit for 230 V (alternating current)

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 PRESS DATA Bjdpfx Ae Ad H Tteiwoww Press force: 25 t Table dimensions: 600 × 360 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW MACHINE DETAILS MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Bwjdpfx Ajymayvoiwew

Condition: used, Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector, Used machine Manufacturer: Nederman (Helsingborg, Sweden) Fan type: FQ 561 N4A RD 160L/2P B3 RDO (NCF 160/25) Year of manufacture: 2013 Overall dimensions: Filter unit dimensions: 1650 x 1530 x 4920 mm (1200 x 1510 x 4180 mm) Fan unit dimensions: 1200 x 1100 x 1120 mm Motor and fan parameters: Motor power: 18.5 kW (2P, frame size 160, 50 Hz) Max speed: 3000 rpm Features: High-capacity multi-module filter housing with cassette filter elements Built-in control box mounted on the filter unit High-capacity standalone 18.5 kW Nederman NCF 160/25 centrifugal fan Bwodpe Ahqhnefx Aiwow Includes ductwork sections and adapters for installation Lower hopper and dust collection bin Suitable application areas: Extraction and filtration of dry dust generated during grinding, sanding, and material handling. High-capacity extraction of welding fumes, plasma, and laser cutting smoke. Centralized dust extraction system for complete workshops or multiple machining stations