trimess GmbH

Condition: like new (used), Year of construction: 2000, Coordinate measuring machine Wenzel LH 54 The device was purchased for a specific project at the time and was only used once. It is in like-new condition. Travel range X/Y/Z: 500mm/600mm/400mm Max. length measurement error: 2.9 + L/350 Max. single-point error: 2.9 Includes Renishaw probe head PH10T Probe set (see picture) 2 PCs, without software dongle #VFLO1 Bwedpfxszyui Dj Ab Djt

Condition: used, Year of construction: 2021, X-axis: 300mm, Y-axis: 200mm, Z-axis: 200mm, max. table load: 20kg, temperature gradient: 2K/h, relative humidity: 40-70%, length: 750mm, width: 737mm, height: 1664mm, weight: 260kg, operating hours: approx. 100h, with documentation, regularly serviced and inspected by the manufacturer. An on-site inspection is possible. Bodpfx Aozyq Szsb Dswt

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Year of manufacture: 2004 (date of manufacture 12/2004) Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Bjdpfx Aezxgmxjb Djwt Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Description: For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: please request a quote.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, type plate available, Very good condition, original software including hardware key. Renishaw measuring probe. Bwsdpfxozw Rpno Ab Dot Direct sale to end-user only.

Condition: excellent (used), machine/vehicle number: 94681, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. Bwsdpfozwvk Rjx Ab Dot ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 Bedpfezwu Alsx Ab Dowt * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. An inspection is possible by prior arrangement. Subject to errors, changes, and prior sale. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, type of input current: AC, input voltage: 220 V, Zeiss CONTURA CMM ( As good as NEW ) !!! Quick sale price Bjdpezwuk Asfx Ab Djwt

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Faro Gage Plus measuring arm with 6 axes Bsdpjzwkphsfx Ab Dewt Measuring arm length: 4 ft (approx. 1.2 m) Accuracy: 5 + 8L/1000µm Includes measuring table, accessories, and matching transport case Includes operating instructions and manuals.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 400 mm, overall weight: 500 kg, input voltage: 230 V, year of last overhaul: 2026, maximum load weight: 350 kg, Equipment: documentation/manual, type plate available, MITUTOYO CRYSTA-PLUS M574 – AVAILABLE IMMEDIATELY – ATTRACTIVE PRICE Are you looking for a reliable Mitutoyo CMM at an attractive price? We are offering this Mitutoyo CRYSTA-PLUS M574, manufactured in 2012, for quick sale. This is an excellent opportunity for companies looking to expand their measurement capabilities without immediately investing in a new measuring machine. Mitutoyo quality, available immediately. The CRYSTA-PLUS series is known for its robust construction, ease of use, and reliable measurement performance. With a measuring range of approximately 500 × 700 × 400 mm (X/Y/Z), this machine is suitable for a wide range of dimensional control and inspection tasks. Bsdpfxezvyvhs Ab Djwt Machine Specifications Brand: Mitutoyo Model: CRYSTA-PLUS M574 Year of Manufacture: 2012 Measuring Range: approx. 500 × 700 × 400 mm Type: Manual coordinate measuring machine Availability: Immediate Sale Condition: AS IS / WHERE IS Competitively priced for quick sale This machine has become available, and we want to sell it in the short term. As a result, we can offer it at a very attractive price. The CMM is sold in its current condition (AS IS), without refurbishment or additional warranty. Inspection prior to purchase is of course possible and recommended, so you can assess the machine and its existing configuration yourself. Interested? Make us a good offer. If you submit a serious and reasonable offer, we can close the deal quickly. Contact us for more information, photos, to arrange an inspection, or to submit an offer directly.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 500 kg, total height: 2,750 mm, total width: 1,200 mm, total length: 1,400 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, overall weight: 1,800 kg, input voltage: 230 V, table width: 700 mm, table height: 600 mm, table length: 1,000 mm, year of last overhaul: 2026, maximum load weight: 500 kg, Equipment: documentation/manual, Nikon LKV 10.7.6 – complete 3D measuring system with scanner and probe For sale: Nikon LKV 10.7.6 in very good condition, complete with a Nikon LC15Dx 3D laser scanner and a Renishaw TP200 probe system. The combination of scanning and probing makes this measuring machine very versatile. The LC15Dx scanner is ideal for quickly and digitally capturing complex shapes and surfaces. This allows large amounts of measurement points to be collected in a short time, enabling efficient mapping of shape, contours, and deviations. The TP200 probe is suitable for highly accurate contact measurements, for example, of holes, surfaces, edges, and other geometric features. This allows both freeform shapes and critical dimensions to be accurately checked. With PolyWorks software, this machine is very easy and quick to program, so that measurements from both the probe and the scanner can be performed together in one program and included in the same report. The machine is offered complete, including: New PolyWorks|Inspector license High-end workstation computer Complete installation and configuration with calibration according to ISO-10360 Bwsdpjzvyrcsfx Ab Dst Training and explanation Delivered ready for use A complete solution for 3D inspection, dimensional control, and quality control, allowing you to both scan quickly and probe with high precision. The machine is in very good condition and can be viewed and demonstrated by appointment. You are welcome to come and see the machine and discuss its capabilities. Please feel free to contact us for more information or to schedule an appointment.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, workpiece weight (max.): 180 kg, total height: 2,185 mm, total width: 1,082 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 550 kg, input voltage: 230 V, table length: 1,122 mm, travel speed (max.): 520 mm/min, table load: 180 kg, compressed air connection: 5 bar, Mitutoyo Crysta Apex-C544 CNC 3D coordinate measuring machine. Within the Netherlands, transport and installation will be provided free of charge (calibration and certificate are not included, but can be offered). Well-maintained Mitutoyo 3D coordinate measuring machine Crysta Apex-C544 In very good condition. Fully meets its specifications. Year of manufacture 2004. Three-dimensional measurement within two micrometers! Measuring range: X-axis 505 mm. Y-axis 405 mm. Z-axis 405 mm. Specification ISO 10360-2 MPEE = [1.9 + 3.0L/1000] µm (at a temperature of 16 ... 26 °C). Temperature compensated. Resolution 0.0001 mm. CNC speed 520mm/sec. Maximum acceleration 0.23 g. Load capacity with work piece up to 180 kg. Height 220 cm. Width 110 cm. Length 115 cm. Air-bearing shafts (feed 5 Bar). Operates on 230 Volts to controller (the CMM itself is low voltage). Crysta Apex-C544 (PH1 + TP200). Standard joystick. Desktop PC with Windows 11 Pro NL. 22-inch monitor. Mouse & keyboard. MCOSMOS v3.3 + Scanpak. Upgrades are possible to: PH10T/M + PHC10-2. SCR200 + 6 STD module. MCOSMOS as desired, subject to availability. Dual joystick. On-site training. Sales prices exclude service (takeaway price): Transport, Installation, Calibration, and Measurement Certificate. Demo/working viewing is available in the Netherlands by appointment. Bedpfxezvfdde Ab Dswt Within the Netherlands, transport and installation will be provided free of charge (calibration and certificate are not included, but are possible).

Condition: used, Year of construction: 2016, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 16 kg, total height: 1,700 mm, type of input current: AC, total width: 900 mm, total length: 1,050 mm, overall weight: 321 kg, input voltage: 230 V, table load: 16 kg, maximum load weight: 16 kg, Equipment: type plate available, We are offering this used Hexagon OPTIV CLASSIC 322 coordinate measuring machine, manufactured in 2016, for sale. Manufacturer: Hexagon Model: OPTIV CLASSIC 322 Year of manufacture: 2016 Condition: used Type: Coordinate measuring machine A computer can be purchased with the machine if required. The price does not include a computer. The PC DMIS version is unknown and must be checked by the buyer to determine if and how the software can continue to be used. With prior arrangement, the machine can be started up and a sample part measured. Bwedpfx Aszvdlyeb Dot If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200008301032, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, table width: 680 mm, table length: 855 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Measuring range, X-axis: 400 mm Measuring range, Y-axis: 500 mm Bjdpozu Ixujfx Ab Dewt Measuring range, Z-axis: 350 mm Maximum workpiece weight: 280 kg Table width: 680 mm Table length: 855 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,100 x 1,100 mm Total weight: 500 kg

Condition: used, Year of construction: 2006, X-axis: 1600mm, y-axis: 1800mm, z-axis: 1000mm, max. workpiece weight: 3.5t, noise level: less than 70dBA, compressed air connection: 6-8bar, connected load: 2500VA, control: CALYPSO 7.6.08 software, length: 2940mm, width: 2450mm, height: 3800mm, weight: 8.5t, operating hours: 38,996h, with documentation. An on-site inspection is possible. Bedpfx Abezuz Aao Dewt

Condition: excellent (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 800 mm, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020. Type: CMM CONTURA 9/18/8 Year of manufacture: 2020 Operating voltage: 100–240 V Frequency: 50–60 Hz We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one. The data, taken directly from Zeiss's service log (as of June 2025): - 10,284 operating hours - 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km) - Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it - Zero significant component replacements - Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it. Probe head: VAST XT Gold Software: Calypso CNC 7.2 + QS-Stat-out Included accessories: PC, monitors, sensor rack Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories. Bwodpezuzf Iofx Ab Djt Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary) It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use. If you have any questions or need further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Mitutoyo coordinate measuring machine, type Crysta Apex C544 Temperature compensation for all axes Measuring range, X-axis = 500mm Measuring range, Y-axis = 400mm Measuring range, Z-axis = 400mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Mitutoyo controller UC200 Mitutoyo joystick box, type M Renishaw probe head PH6M Renishaw probe head PH10M (optional) Renishaw sensor TP200 Renishaw TP200 measuring modules (6x) Renishaw SCR200 probe rack Measuring software MCosmos-1 v.4.x PC system WIN10 and 27" monitor (new) Reference sphere / calibration sphere (new) Delivery: On request Installation: On request Calibration: On request Training: On request Software upgrade: On request Software options: On request Measuring room design: On request On-site consultation: On request Rental: Possible Leasing / hire purchase: Possible Bwedszt Tg Uspfx Ab Djt

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Bodpfx Absztzm Ne Dowt Fast inspection processes Automatic measurement reports Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Scope of delivery: Keyence XM-C1000 measurement system Existing accessories as shown in the picture Documentation

Condition: not inspected (used), Mitutoyo Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks. For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including the existing PC system, two monitors, control unit, measuring software, and extensive documentation. The existing PC system and the installed QVPAK software start. However, the complete machine and measuring function could not be fully tested. The Quick Vision series is used for non-contact dimensional measurement of workpieces using an optical system, image acquisition, and image processing. Bwedpfxeztyabe Ab Det Suitable for precise measuring and testing tasks, including those involving components from the electronics, precision mechanics, and industrial manufacturing sectors. Technical data: Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of manufacture: Japan Machine type: CNC image processing measuring machine Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010 Equipment: Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carrier GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the picture Connecting cables and accessories as shown in the picture Application areas: Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision measurement technology Component and contour inspection Manufacturing and process control Scope of delivery: Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures. Condition: Used Optical condition according to the pictures PC system and existing QVPAK software start. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures. Important note: The machine has not been tested because it is in a protection mode after being moved. This is also intended by the manufacturer during machine transport. The machine must be put back into operation by qualified Mitutoyo personnel. Shipping by freight forwarder is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2013, A 3D CNC coordinate measuring machine in need of repair is offered for sale. Max. measuring range X/Y/Z: 400mm/400mm/300mm, measuring principle: hybrid (optical/tactile), optical system: CCD camera with motorized zoom optics, focusing method: contrast autofocus, max. accuracy: 1.5µm (MPE), guideways: mechanical precision guideways, base structure: granite construction, control: CNC in all 3 axes, software: WinWerth®. The Z-axis no longer moves. An on-site inspection is possible. Bwodpfx Abeztrbde Djt

Condition: ready for operation (used), Year of construction: 2010, A manual 3D coordinate measuring machine from Mitutoyo is offered. Measuring range X/Y/Z: 500mm/700mm/400mm, measuring table: granite, clamping area X/Y: 764mm/1175mm, max. workpiece height: 590mm, max. workpiece weight: 180kg, length measuring system: high-precision glass scales, resolution: 0.0005mm, length measuring system resolution: 0.0001mm, single stylus form deviation PForm,MPE: 6µm, measured single stylus form deviation: 5.15µm, repeatability range R0: 9.70µm, guide system: air bearings on all axes, axis clamping: pneumatic, probe system: Renishaw MH20i. Machine dimensions X/Y/Z: approx. 1122mm/1434mm/2267mm, weight: approx. 646kg. The machine was calibrated by Mitutoyo on 10.03.2026. Documentation is available. An on-site inspection is possible. Bwjdpfoztdt Sex Ab Det

Condition: good (used), Year of construction: 2013, Coordinate measuring machine HEXAGON Optiv Classic 321 GL, serial number 6K012-3, with computer DELL Precision T3500, Intel Xeon processor, TESA Bugnon 38 remote control, purchased in 2013, last calibration 09/2017. Bedpfeztc A Sex Ab Djwt

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and visually like-new condition The machine was located in an air-conditioned precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Bjdjzr I R Ejpfx Ab Dowt Probe changer turret, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm Bjdpfx Ajzrd R Ueb Dewt EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover - New pressure cylinder installed - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo 9/15/7 VAST GOLD Year of manufacture: 2000 Retrofit 2024, last DAkkS calibration 12/2021 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition Device features, equipment: Bedpfx Aszq U Rceb Dewt C99 control system with BP26 operating panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine MSR, 10-position VAST Probe changer plate, 8x VAST Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software Options: Curve and QS-Stat Calypso upgrade and other options possible Further accessories and options available Available for immediate delivery

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, warranty duration: 3 months, Equipment: documentation/manual, Complete Package Including: 1 Zoom 90 R 5'' Robotic Total Station with WinCE AiM360, TRack360, and Scout360, 5", accXXess10 EDM 1000M, 1 Long-range Bluetooth handle 500m, 1 Manual in French or English, 2 Li-Ion 4.4Ah batteries, 1 Li-Ion battery charger, 1 Lead-free optical plummet, 1 Industrial-grade SD card, 1GB, 1 Notebook holder, 1 360° prism, 1 Touchscreen tablet, 1 X-Pad topographic software included. Calibration certificate. Suitable for Civil Engineering, Surveyors, Topographers, and Construction. Bwedpezq Hu Hofx Ab Dot The Zoom90 robotic total station is an ultimate single-operator system, offering up to 20% more automated performance, extended non-prism measurement capabilities up to 1000m, STReAM360, accXess technologies, and open Windows CE connectivity. OPEN CONNECTIVITY Connect your preferred software and data logger to perform remote control tasks without reducing productivity. The Zoom90 uses the Windows CE operating system, which allows the execution of many powerful field software programs. Full VGA color touchscreen, guaranteeing optimal performance and graphic capabilities. TOPOGRAPHY ADVICE Alternative solutions in terms of measurement and software. #Topography #TotalStation #Leica #LeicaGeosystems #TopographicEquipment #UsedTopography #Surveyor #Geomatics #3DScanner #GPS #Theodolite #Monitoring #CivilWorks #ConstructionSite #LaserScanner #Mapping