Intesa GmbH

Condition: used, Year of construction: 2018, functionality: fully functional, Description: Gsdpfx Ade Aih Twj Rsui * Due to changes in our business area and a production realignment, we are selling a waterjet cutting system STM 3020 on short notice. * Waterjet cutting system STM 3020 Year of manufacture: 2018 * Working area: X = 3002 mm, Y = 2002 mm, Z = 300 mm, table area: 3100 mm x 2100 mm *

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Gedpfx As Ahgrtsd Rjui Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, input voltage: 480 V, input frequency: 60 Hz, FLOW Mach 4 Waterjet Cutting Machine (6000 bar) Main specifications: Manufacturer: FLOW Model: FLOW Mach 4 Working area: 4 x 2 m Year of manufacture: 2014 Gjdpfxj Agug Ne Ad Roui Pump: WMC 87k High-Pressure Intensifier, 6000 bar (dual intensifier) Pump power: 100 HP Cutting head: 3-axis with taper compensation During cutting, the water jet naturally forms a slight cone, which can cause the edge of the part to be slightly angled. The taper compensation automatically tilts the head, ensuring that the edges remain straight and perpendicular. This results in higher accuracy and cutting quality, especially on thick materials, without the need for any secondary machining. Key advantage: spare intensifier included The machine comes with an additional spare intensifier. This is a significant advantage, as the intensifier is one of the key components and the most heavily loaded part of the pump. Having a spare on hand allows for a quick return to work if the main intensifier requires servicing, minimizing downtime. Included with the machine and pump: - Water filtration station - Abrasive feeder - Several spare parts - Spare intensifier - Abrasive removal system Condition: The machine has been operating continuously, 24/7, so we cannot provide the exact number of operating hours. However, it has been maintained according to FLOW’s service schedules throughout this period. The machine is still in operation.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, CNC waterjet cutting machines PB-C 4020 COMBI X working area max.: 4000 mm Y working area max.: 2000 mm Control system: TCI CNC 4.0 Operating hours: 13,859 hours Laser beam on: 2938 hours Sheet metal thickness max.: 60 mm Workpiece weight max.: 3000 kg The waterjet cutting machines from TCI Cutting combine state-of-the-art European technology with individual further developments, based on many years of experience in the industry, both nationally and internationally. The PB-C COMBI combines the advantages of waterjet cutting technology with those of HD plasma cutting in a single machine. This offers our customers cutting precision, versatility, and speed, as well as the quality typical of HD plasma. In short: a complete solution that guarantees the highest surface quality for cuts of varying complexity, material thickness, and material type. The machine enables the cutting of workpieces with pure water or with water and abrasive, even with very hard and thick materials. As a result, it covers a broad spectrum of cutting processes, which can be adapted to the needs of the customer and the respective industry. In waterjet cutting, the workpieces are cut cold, which avoids changes in the chemical composition and deformations – especially in metals. - Plasma source Hypertherm XPR300 - Various nozzles for the cutting head - High-pressure pump KMT SLVI 50 STD Gusdpe Afm Hisfx Ad Rsi Maximum pressure: 3800 bar Power: 37.5 kW - Water treatment system - Silo and dosing system for abrasive sand - Slurry flushing and filter system

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 20110006, Finecut WMC precision cutting machine. The machine is in working order and can be tested. Working area: 500 x 500 mm Maximum material thickness: 50 mm Gjdpe Afdh Dsfx Ad Reui The machine is supplied without a high-pressure pump.

Condition: reconditioned (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, warranty duration: 6 months, CARETTA MODULA 4020 – 3-AXIS WATERJET – 4,000 × 2,000 MM – REFURBISHED WITH WARRANTY Available without pump or complete with a KMT Streamline SL-V 50 Classic 50 HP pump. The first year of CAD-CAM IGEMS subscription is included in both configurations. B&B Waterjet Abrasive offers a Caretta Technology Modula 4020 3-axis waterjet cutting machine, with a working area of 4,000 × 2,000 mm, self-aligning gantry, and ECS CNC 1802 numerical control. The machine is supplied with refurbished or new components, a new Dialine cutting head with integrated diamond, and a new abrasive metering unit. CONFIGURATIONS AND PRICES • €40,000 + VAT: machine without high-pressure pump, with the first year of IGEMS subscription included. • €65,000 + VAT: machine complete with a KMT Streamline SL-V 50 Classic pump, with the first year of IGEMS subscription included. From the second year onwards, the IGEMS subscription costs €1,500 + VAT per year. For both configurations, transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately. TECHNICAL SPECIFICATIONS • Manufacturer: Caretta Technology • Model: Modula 4020 • Technology: abrasive waterjet cutting • Configuration: 3 axes with self-aligning gantry • Working area: 4,000 × 2,000 mm • Controlled Z-axis, 200 mm stroke • Numerical control: ECS CNC 1802 • Cutting head: new Dialine with integrated diamond • Abrasive metering unit: new • Abrasive tank: 200 liters • Motors and drives: Yaskawa • Guides and slides: INA • Rack: Güdel with helical teeth • CAD-CAM software: IGEMS, first year of subscription included SLUDGE SYSTEM INCLUDED IN BOTH CONFIGURATIONS Provision for a sludge disposal system, with a tank, semi-automatic electrical panel, and diaphragm pump included in the supply. PUMP FOR THE €65,000 + VAT CONFIGURATION • Brand: KMT • Model: Streamline SL-V 50 Classic Gujdpfx Ado Ad I U Ej Roi • Power: 50 HP / 37 kW • Maximum pressure: 3,800 bar • Flow rate at 3,800 bar: 3.7 l/min • Topwork refurbished to new condition • Oil and filters replaced The indicated power refers to the pump, not to the total power consumption of the system. WARRANTY, DELIVERY, AND LOCATION Both configurations include: • 6-month / 1,000-hour warranty, according to the offer conditions. • Delivery expected within 8 weeks from receipt of order. Machine can be viewed by appointment at: Via Campolongo, 81E – 35019 Onara di Tombolo (PD), Italy. B&B WATERJET ABRASIVE – OVER 17 YEARS OF EXPERIENCE We support you from the selection of the machine to after-sales service: installation, commissioning, operator training, maintenance, spare parts, and abrasive supply. Services are quoted based on the requirements and the machine's destination. Contact us specifying the desired configuration, the materials to be processed, and the installation location: we will prepare a customized offer.

Condition: excellent (used), Year of construction: 2014, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 1000001927, travel distance X-axis: 3,210 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, pressure: 3,800 bar, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, INTERMAC PRIMUS 322 METAL – 5-AXIS WATERJET – YEAR 2014 Approximately 2,200 operating hours | Working area 3,210 × 2,000 mm | BFT Ecotron 38.22 pump | 3,800 bar B&B Waterjet Abrasive offers for sale a used Intermac Primus 322 Metal 5-axis waterjet cutting system, year 2014, complete with a 22 kW BFT Ecotron 38.22 high-pressure pump. The machine is in excellent condition and was disassembled while in working order. It is currently disassembled at our Onara di Tombolo (PD) location, where it can be viewed by appointment. A functional test is not available in its current state. The 5-axis configuration allows for machining with an inclined head, offering greater versatility compared to vertical cutting alone. TECHNICAL DATA • Manufacturer: Intermac / Biesse • Model: Primus 322 Metal – Waterjet • Year of manufacture: 2014 • Configuration: 5 axes, X / Y / Z / A / C • Machine operating hours: approximately 2,200 • Working area X/Y: 3,210 × 2,000 mm • Z-axis travel: 200 mm • A-axis tilt: ±60° • C-axis: continuous rotation • Maximum axis speeds X/Y/Z: 45 / 45 / 15 m/min (not cutting speed) • Allowable load on the table: 1,000 kg/m² HIGH-PRESSURE PUMP • BFT Ecotron 38.22 • Pump motor power: 22 kW • Maximum pressure: 3,800 bar • Maximum flow rate: 2.3 l/min • Pump power supply: three-phase, 400 V, 50 Hz APPLICATIONS Abrasive waterjet cutting of metals, including steel, stainless steel, aluminum, copper, brass, and titanium, as well as stone, ceramics, and non-tempered glass. Thicknesses, speeds, and achievable quality depend on the material and processing parameters. REQUESTED PRICE: €50,000 + VAT The price includes the machine and the BFT Ecotron 38.22 pump. Transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately depending on the destination and the customer's requirements. B&B WATERJET ABRASIVE: YOUR WATERJET PARTNER Gusdpfo Aduy Iox Ad Rei With over 17 years of experience in the industry, we support the customer from the selection of the system to its daily management. We can assist with installation and commissioning, operator training, technical assistance, and maintenance, as well as the supply of spare parts and abrasives. A single point of contact to guide you through the purchase and support you over time. To receive more information, arrange a visit, or request a quote including the necessary services, please contact us, indicating the installation location and your production requirements. B&B Waterjet Abrasive

Condition: used, Year of construction: 2016, controller model: , _____ Description: Year of manuf. : 2016 Base axis (X) : mm Outrigger (Y) : mm Technical Specifications Working area X/Y:4,000 × 2,000 mm Material support area X/Y:approx. 4,100 × 2,100 mm Z-axis travel:approx. 150 mm Max. traverse speed:12,700 mm/min Max. contour cutting speed:7,620 mm/min X/Y positioning accuracy:± 0.04 mm/m X/Y repeatability:± 0.05 mm High-Pressure Pump Manufacturer / Model:Flow HyPlex Prime 30 Motor power:22 kW (30 HP) Max. design pressure:4,150 bar Continuous operating pressure:3,800 bar Max. flow rate:3.1 l/min Power supply:400 V / 50 Hz / 3-phase Standard Equipment :-Dynamic Waterjet XD 3D cutting technology, up to 60° head movement :-PASER 4 abrasive cutting system :-Abrasive storage hopper, capacity approx. 285 kg :-Premium stainless steel catcher tank with water level control :-CleanCut material support system :-Flow Shields splash protection :-Safety light curtain Godpfxoz S S Efo Ad Rjui :-FlowMaster PC control system Additional Equipment :-Flow UltraPierce piercing assistance system :-DynaBeam laser height sensor :-LaserPointer :-Pure water conversion kit

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 2,020 mm, travel distance Y-axis: 4,020 mm, travel distance Z-axis: 150 mm, table length: 4,346 mm, table width: 2,286 mm, Waterjet Corporation Suprema 4020 – 4,000 × 2,000 mm cutting area – available with KMT pump B&B Waterjet Abrasive offers a used Waterjet Corporation Suprema 4020 waterjet cutting machine, featuring a Mitsubishi CNC controller and ball screw drive system. The machine has recently been dismantled and is offered in its current condition, as-is, without refurbishment. Main specifications - Cutting area: 4,000 × 2,000 mm. - Z-axis travel: 150 mm. - Mitsubishi CNC controller. - Ball screw drive system. - KMT IDE cutting head with diamond orifice. - Single-stage abrasive pressure hopper included. - Prepared for a sludge removal system. - Manuals and CE documentation available. Gjdpfx Adoz Hynvj Reui Available configurations - Machine without high-pressure pump: €45,000. - Machine with KMT 50 Classic high-pressure pump: €65,000. Optional equipment and services — not included, quoted separately - Sludge removal system. - Custom-built big bag hopper. - Air-to-oil cooling system. - IGEMS CAD/CAM software. - Installation and operator training in Italy and across Europe, quoted according to the customer’s location and requirements. Contact us for further information and to discuss the configuration best suited to your cutting requirements. B&B Waterjet Abrasive has been operating in the waterjet industry since 2009, supplying machines, spare parts and technical support.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M440104, input voltage: 400 V, input current: 2 A, input frequency: 50 Hz, Plasma cutting system CMS3 Plasma Wasp 300x150 cm including Viaduct software with Nitec Fiblo 4000 extraction system Gedpfoz A Uqqsx Ad Roui Inspection only by appointment! Collection only.

Condition: used, Year of construction: 2010, We offer this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original replacement controllers for this model year are often no longer available, this upgrade provides long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b Godpfx Aezwpfhjd Roui • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 hp / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & Equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables up to 50% faster cuts compared to standard systems. Scope of delivery: • Waterjet cutting system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal incl. software • Technical acceptance report / service report from 01/2026 Location & Inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from September 15, 2026. Sales & Legal notes: The sale is exclusively in the B2B sector (commercial sale) with the exclusion of any liability for defects, guarantee and warranty ("sold as is"). Returns, exchanges and renegotiations are excluded. All information, data and descriptions are provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy and topicality. The buyer is required to check the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are the sole responsibility of the buyer and at his expense. If you have any questions or require further information, please feel free to send us a message or call us. Waterjet cutter, Waterjet cutting machine, Découpe jet d'eau, Taglio a getto d'acqua, Wycinarka wodna, Rezanie vodným lúčom, 5-axis waterjet, Dynamic XD, Flow HyperJet, 4000x2000, Large format cutting system.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Gjdpszu R T Iefx Ad Roui Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: used, angle steel/side length / mm Guedpszu A Uqjfx Ad Rei double T-iron on the x-axis / mm U-iron on the x-axis / mm

Condition: used, Year of construction: 2005, Working area 4000 × 2000 mm Vertical movement 250 mm Gedpfxozgaq Te Ad Roui Max. Thickness 80 mm Control: Osai 10/510 ANL Pump: Streamline SL- V 50

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. Gsdpfx Adsy Urzie Rjui The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Condition: refurbished (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, warranty duration: 24 months, pump pressure: 4,000 bar, power: 30 kW (40.79 HP), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX pump, and TiltaJET for absolutely vertical cuts. Completely overhauled with manufacturer certification and a two-year warranty! The waterjet cutting system from the latest OMAX high-end OptiMAX series, featuring a bridge construction, represents the pinnacle of technological feasibility combined with reliability, durability, and maximum load capacity. Low-noise and low-emission operation combined with simple PC-assisted operation for precision at the touch of a button makes this series ideal for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7 operation. Features: • Closed measuring system • Digital drives • Brushless servo motors • Precision linear guides, surface-hardened • Portal (bridge) driven on both sides • Maintenance-free IntelliTRAX drive • Energy-efficient ultra-high-pressure EnduroMAX pump • Practical water level regulation as standard • Ergonomic control panel on wheels • IntelliMAX Premium control software • Highly accurate 5-axis TiltaJET kinematics • Accuracy up to ± 0.02 mm • Software and machine components based on the latest OMAX technology With the TiltaJET swivel head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swivel head automatically compensates for the cutting angle error on the cutting edge, regardless of the selected quality and cutting speed. The configuration of the waterjet cutting system can be freely selected. The system can be expanded with extensive accessories according to your cutting requirements. Please contact us and let us know your configuration requirements. Upon request, financing via leasing is possible at very attractive conditions, e.g., up to 86 months. The machine has been completely overhauled; therefore, the images may differ from the offer. A timely delivery can be arranged with INNOMAX AG. Guodpfx Aey Umhked Rji

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 400873, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, pump power: 2,200 W, sheet thickness steel (max.): 120 mm, The machine was overhauled in 2026 and is serviced every 500 operating hours! TECHNICAL DETAILS Working area, X-axis: 1,500 mm Working area, Y-axis: 1,500 mm Cutting capacity, steel: 120 mm (recommended: 60 - 80 mm) Cutting capacity, aluminum: 120 - 200 mm Cutting capacity, plastic, stone, etc.: unknown MACHINE DETAILS Pump power: 22 kW (30 HP) Gujdpfx Adey Nmtvo Rsi Last pump overhaul: 3 operating hours ago Machine dimensions (L x W x H): 2,500 x 1,900 x 1,500 mm EQUIPMENT Spare parts Computer Water softening system

Condition: like new (used), Year of construction: 2023, operating hours: 1,400 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, For sale: MicroStep WaterCut 2001.30W waterjet cutting machine in perfect condition, manufactured in 2023. The machine is equipped with a BFT Ecotron 40.37 high-pressure pump – 4000 bar and 37kW – one of the top-performing and most reliable pumps on the market. Key specifications: - Working area: 2000 x 3000 mm - Cutting head: 3-axis with anti-collision sensor - Total working hours: approx. 1400 h The machine is sold as a complete, ready-to-run package, including: - 1-ton abrasive feeder (Allfi) - Automatic sludge removal system (tank cleaning system) This configuration allows you to begin production immediately without additional investment. The machine is available for immediate delivery. Gujdpfx Aey Ecr Hsd Rsi

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Gedpsyq Rdyofx Ad Reui Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: used, Year of construction: 2001, functionality: fully functional, load capacity: 15 kg, Fully functional waterjet system (manufactured circa 2001) with KUKA KR15 six-axis robot. The system operates with pure waterjet cutting (without abrasive additives) and is currently still in use for processing plastic components. Offline programming, demonstration possible. Includes KMT Streamline pump (15 HP). Complete system with automatic door opening and closing. Contact us if interested! Gjdpfxeyl Niqo Ad Rsui

Condition: excellent (used), Waterjet Trumpf water cutting machine for sale: It has Trumpf mechanics and new electronics: new control panel with new ac servo motors; Mach 3 water jet control software; Working table dimensions: 2.5 m x 1.25 m. There is a possibility of adding the plasma cutting technique, so the machine could be used for both plasma cutting and water cutting. The machine can be tested in our company. We also have the option of selling waterjet pumps. Guodpoyghfajfx Ad Rsi

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, repeat accuracy: 0.05 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.05 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,150 mm, table width: 2,080 mm, pressure: 4,150 bar, positioning speed: 15,000 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, For sale is a CMS Smartline 2040 waterjet cutting machine, manufactured in 2023, in excellent condition with only 200 working hours. The machine has been very lightly used and is technically and visually in top condition. Technical specifications: Manufacturer: CMS Model: Smartline 2040 Year of manufacture: 2023 Working hours: 200 h Working area (X × Y): 4000 × 2000 mm Z-axis stroke: 250 mm Cutting head: 3-axis Pump: Easypump 30 HP (22.5 kW) Maximum pressure: 4150 bar Abrasive feeding system: 270 kg hopper CNC control: OSA Open Machine condition: Very good / like new Gujdoydpmgepfx Ad Rji This machine is an excellent choice for companies looking to enter waterjet cutting or expand capacity without investing in a brand-new system. The machine is supplied complete with an air compressor included in the scope of delivery.

Condition: new, Year of construction: 2025, operating hours: 500 h, functionality: fully functional, Technical Specification Model: OptiMAX 80X Working area (X × Y): 4,267 × 2,032 mm Z-axis (height): 305 mm, motorized Machine footprint: approx. 7,925 × 3,937 mm Gedpfx Aexm Riged Roui Height: approx. 3,050 mm Weight (empty): approx. 4,150 kg Maximum material load: 1,950 kg/m² Power supply: 3-phase, 380–480 V, 50–60 Hz Noise level: < 80 dBA (during submerged cutting) Speed (X-Y): up to 8,890 mm/min Accuracy: ± 0.025 mm Repeatability: ± 0.025 mm Roundness: ± 0.076 mm Pump Type: EnduroMAX 50 HP Pressure: up to 60,000 psi (≈ 4,100 bar) Flow rate: approx. 4.5 l/min (depending on nozzle) Reliable operation, energy efficient and built for long service life Equipment & Options TiltaJet cutting head for angle compensation – delivers straight cuts without secondary finishing SRS (Solids Removal System) for automatic extraction of abrasive and particles Offered exclusively within Sweden

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each Guedoxgumcopfx Ad Rsi – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm Gsdsxgua Aepfx Ad Rsui - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional