V.k. Engineering

Condition: used, overall weight: 4,700 kg, Freely movable electro-hydraulic forging manipulator, Dango & Dienenthal A 5.1, from company stock. The manufacturer’s plate is dated November 20, 1985, and bears the order number 10085001. Technical specifications: • Load capacity according to purchase documents: 600 kg nominal, 800 kg maximum • Permissible load depends on application and load moment • Motor: 15 kW according to manual, 380 V / 50 Hz • Weight: approximately 4,700 kg • Travel speed: 0–90 m/min, clamp rotation speed: 3–34 rpm Wireless remote control and Stemmann cable reel (year of manufacture 2010) are included. Operating documents and hydraulic diagram are available. Condition and inspection: The machine is functional and can be demonstrated under power by arrangement. To the seller’s knowledge, no defects are known. Availability and collection: Gksdpfx Ao Aia Uiskhed Available immediately. The buyer is responsible for dismantling, loading, and transport. The exact scope of delivery and collection date will be agreed upon.

Condition: used, functionality: fully functional, machine/vehicle number: 11267, year of last overhaul: 2010, Pneumatic free-form forging hammer Bêché L10, from company stock. The existing machine data sheet indicates a year of manufacture of 1951 and a factory number of 11267. The current motor nameplate indicates 90 kW. Technical specifications: • Hammer weight: 1,000 kg • Impact energy: 3,000 mkg, approx. 29.4 kJ Gksdpfo Aia Ufex Akhed • Impact rate: up to 90/min, overhang: 800 mm • Motor: 90 kW, 220/380 V Δ/Y, 50 Hz • Total weight according to data sheet and KTI: approx. 40 t, historical machine data sheet: 42 t Overhaul work carried out in 2010 is documented with photographs. Machine data sheet, drawings and operating documents are available. For transport planning, the disassembly configuration and assembly group weights must be coordinated. Condition and inspection: The machine is in working order and can be demonstrated under power by arrangement. To the seller's knowledge, no defects are known. Availability and collection: Available immediately. Disassembly, loading and transport are the responsibility of the buyer. The exact scope of delivery and the collection date will be agreed upon.

Condition: used, Year of construction: 1959, functionality: fully functional, overall weight: 43,000 kg, LASCO KH200 forging hammer from company stock. The conversion to Siemens S7 is documented for 2010/2011. Control panel, foot pedal, installed dies, and tension wedges are included. Technical specifications: • Year of manufacture 1959, according to available documents • Impact energy 20 kJ, ram weight 1,800 kg • Impact rate up to 100/min • Total weight approximately 43 t Impact data and total weight are documented in the KTI documents. Drawings, hammer path documentation, and electrical diagrams are available. Condition and inspection The machine is functional and can be demonstrated under power by arrangement. To the seller's knowledge, no defects are known. Availability and collection Available immediately. Disassembly, loading, and transport are the responsibility of the buyer. The exact scope of delivery and the collection date will be agreed upon. Gkjdpfx Ake Aia Ubohod

Condition: used, Year of construction: 1959, functionality: fully functional, machine/vehicle number: 6402/2, overall weight: 31,500 kg, For sale is a LASCO KH125 from company stock. This forging hammer features a Siemens PLC control system. The operating panel and associated control cabinets are included. Technical specifications: • Year of construction 1959 according to the electrical diagram, machine number 6402/2 • Order number 1465 (5328) • Impact energy 12.5 kJ, ram weight 1,250 kg Gsdpfe Aia T Tox Akhjkd • Impact rate up to 110/min, main motor 22 kW • Total weight approximately 31.5 tons Technical documentation and electrical diagram are available. Condition and inspection The machine is functional and can be demonstrated under power by arrangement. To the seller’s knowledge, no defects are known. Availability and collection Available immediately. The buyer is responsible for disassembly, loading, and transport. The exact scope of supply and the collection date will be agreed upon.

Condition: excellent (used), functionality: fully functional, overall weight: 65,000 kg, total height: 4,915 mm, space requirement height: 3,530 mm, TECHNICAL SPECIFICATIONS Striking force: 6300 kg per meter Stroke: 560 mm Distance between slides: 650 mm Striking rate: 115 strokes per minute Used equipment, technical documentation included. Godpfx Ake Ah Idlehokd Attached you will find photos of the hammer and a technical data sheet. Price available upon request.

Condition: excellent (used), functionality: fully functional, overall weight: 16,000 kg, total height: 3,570 mm, space requirement height: 2,900 mm, BANNING GOA 1250 pneumatic drop forging hammer in perfect condition. Striking force: 1600 kg per meter Stroke: 440 mm Distance between slides: 450 mm Minimum die height: 220 mm Maximum weight of the upper die: 250 kg Striking rate: 140 strokes per minute Used equipment, technical documentation included. Attached you will find photos of the hammer and a technical data sheet. Gksdpfx Ao Ah Ibxjkhod Price upon request.

Condition: excellent (used), overall weight: 75 kg, Anvil 75 kg Length 600 mm Width of hammer face 120 mm Length of hammer face 400 mm Height 260 mm Width 250 mm Gkedpe Agw Tvsfx Akhed Square hole diameter 24 mm

Condition: used, Year of construction: 1951, Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible. Gkedez R A Iuspfx Akhjd

Condition: excellent (used), functionality: fully functional, overall weight: 100,000 kg, workpiece weight (max.): 18 kg, Hot forging hammer HUTA ZIGMUNT type MPM 3000 Energy of blow: 10 000 kgm Ram weight: 3 580 kg. Max. ram stroke: 1 000 mm Gedpozzrtvefx Akhskd Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. The machine is complete with separate anvil/base and electric motor. Technical data: Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Anvil/base weight: approx. 1,000 kg Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Gksdpozxd E Sjfx Akhjd Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Serial/identification marking on the machine: “87 №149” Location: Estonia Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Inspection is possible by appointment. More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: good (used), Offer 80216 Gedpfszrvmnsx Akhekd Technical data: - Various pass-through openings, round and square - Length approx. 450 mm - Width approx. 450 mm - Plate thickness approx. 120 mm - Table height with base frame 720 mm - Space requirement: W 500 x D 500 x H 720 mm - Weight approx. 120 kg

Condition: ready for operation (used), Year of construction: 1991, A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible. Gkodpfx Aszrhhwskhed

Condition: excellent (used), Year of construction: 1978, Description to follow! Gedpezl E R Asfx Akhjkd

Condition: used, Anvil with round and pointed horn Anvil, North German design Track width: 140 mm Track length: 440 mm (with pointed horn) Horn length, round horn: approx. 200 mm Horn length, pointed horn: approx. 200 mm Overall length: 630 mm Height: 285 mm Foot: 290 x 210 mm Gkjdpfszinw Hjx Akhjd - Steel casting, hardened - Square hole approx. 28 mm for anvil tools - Round hole, approx. 28 mm diameter Dimensions (L x W x H): 630 x 290 x 285 mm Anvil weight: 95 kg Good condition, very bright tone, good quality.

Condition: used, Year of construction: 1967, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 315 t, air pressure: 6 bar, distance between side stands: 1,300 mm, stroke length: 180 mm, table length: 1,280 mm, table width: 800 mm, Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1250 x 800 mm Gjdpfozh Ilbex Akhokd Distance between columns 1300 mm Sizes L x B x H: 3600 x 1750 x 4600 mm Electric output 25 kW Total weight 17 000 kg

Condition: used, Year of construction: 1980, pressure . t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight); Dango and Dienenthal HSM 12 manipulators; Merz bogie-hearth furnace, hood-type furnace, etc.; wedge- Gksdpfxozfwt Ae Akhsd ram spare parts, etc.; mechanical workshop; oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Anvil & Stand Gkedpfxozcqpyj Akhsd Length x Width x Height 1000x350x360 mm (dimensions of the anvil) Weight approx. 300 kg Errors and omissions excepted.

Condition: ready for operation (used), Romanian CFL 5000 Gkedpfx Asy Ud N Sokhsd Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Video showing the machine in operation available!

Condition: used, Anvil with round horn and rectangular horn Northern German style anvil Face width: 130 mm Gkjdoy Ehycepfx Akhed Face length: 630 mm (with pointed horn) Round horn length: approx. 200 mm Pointed horn length: approx. 220 mm Overall length: 830 mm Height: 340 mm Foot with front anvil: 430 x 320 mm - Cast steel, hardened - Square hole approx. 28 mm for anvil tools - Round hole Ø approx. 23 mm Dimensions L x W x H: 830 x 320 x 340 mm Very bright ring, good quality

Condition: used, stroke . mm weight max. 300 kg speed . m/min total power requirement . kW weight of the machine ca. 2,5 t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Gksdpfxjyuzaao Akhed More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1971, weight max. 1000 kg Gkjdpfx Akoyuqdbehsd workpiece length . mm work piece width . mm Drive elektr. dimensions of the machine ca. 4,2x2,1x2,2 m

Condition: used, Year of construction: 2012, temperature max. 1350 ° internal length of the oven 2800 mm internal width of the oven 2800 mm internal height of the oven 1200 mm Loading 20000 kg dimensions 3,3x3,3x2 m Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available Gkjdpfeytx Rmex Akhed

Condition: used, Year of construction: 1969, ram hammer weight 480 kg stroke 710 mm throat 550 mm impact capacity 1250 kpm no. of strokes 210 Hub/min ram hammer stroke 710 mm work height max. 720 mm Gkjdpfx Akoyqur Ishod total power requirement . kW weight of the machine ca. 7,4 t pressure 400 kg Steam drive No. 3065 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, weight max. 1600 kg Drive Diesel motor Deutz weight 13,6 t Optionally, spare parts can be purchased. No.: Zch5FZ Machine number 16087001 Gkjdpfxsyqt Nxj Akhod The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, weight max. 800 kg Gkodpfsyqtd Aex Akhod workpiece length . mm work piece width . mm stroke 500 mm total power requirement . kW weight of the machine ca. 5 t dimensions of the machine ca. 3x1,6x2 m Electric drive Transport 800 kg Forging 500 kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team