Christner-Holzdesign GmbH i.L.

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,320 mm, travel distance Z-axis: 150 mm, number of axes: 5, This 5-axis BIESSE Rover A4.30 was manufactured in 2010. It features a working field of 3,060 mm in the X-axis and 1,320 mm in the Y-axis, along with a powerful 12 kW air-cooled electrospindle. The machine includes advanced programming with BIESSEWORKS and a revolving tool changer with 10 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A4.30 machine we have for sale. Contact us for further details. • Worktables and positioning: • 6 ATS panel supports, L 1,280 mm • 18 sliding bases • 6 stops with 115 mm stroke • 6 stops with 115 mm stroke positioned at 1,050 mm • 4 side stops with 115 mm stroke (2 LH + 2 RH) • 4 bar supports • 12 clamping units for narrow workpieces • 12 vacuum modules (132 × 146 × H48 mm) • 6 vacuum modules (132 × 75 × H48 mm) • Vacuum system divided into 2 work areas in X • Pneumatic system for bar supports with 2 independent work areas in X • Spindle and aggregates: • 12 kW (16.1 HP) air‑cooled electrospindle, ISO 30 tool holder • Flange for assembly of aggregates • Preparation for 360° operating unit (C‑axis) • ISO 30 aggregate with 1 spindle, manual rotation, adjustable inclination (extra equipment installed) • Tooling and drilling: • Revolving tool changer with 10 positions on X‑carriage side • Boring head BH 21 L: • 7 + 7 vertical spindles • 4 horizontal spindles in X Kledpozndf Dofx Acfew • 2 horizontal spindles in Y • 1 saw blade in X (Ø120 mm) • BH 21 L boring head with quick‑change connections (extra equipment installed) • Drill bit holders for quick‑connection boring head spindles (extra equipment installed) • Automation and preparation: • Automatic lubrication system • Preparation for belt conveyor for chip and off‑cut removal • Preparation for multifunctional unit or horizontal routing unit • C‑axis operating device with 360° rotation and gear transmission (extra equipment installed; for machines with preparation) • Vacuum, pneumatics, electrics: • 90 m³/h vacuum pump • Auxiliary vacuum system • Blower • Inverter • Air conditioner for electrical cabinet • Control and software: • PC‑based numerical control • 19" LCD monitor • Advanced remote keyboard • BIESSEWORKS advanced programming system • RVA SLOT 1 (extra equipment) • Safety: • Safety devices with 2 front safety mats and rear/side protection • Safety devices in conformity with Regulation 2006/42/CE (Rover A 4.30) (extra equipment) Additional equipment • Manual laser barcode reader (not suitable for 2D/QR codes)

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, Working area X: 3715 mm Ksdpfxezncbdo Acfelw Working area Y: 1600 mm Z-axis workpiece passage: 300 mm 5-axis electrospindle, power 13.5 kW Number of vertical drilling spindles: 14 Number of horizontal drilling spindles X: 8 Number of horizontal drilling spindles Y: 4 1 saw blade for grooving in X and Y directions Linear tool changer with 11 positions Rapid circular tool changer with 16 positions FAST linear tool changer with 16 positions FAST pick-up tool changer with 1 position for saw blade VELOCE “on-board” circular tool changer with 16 positions VELOCE 16 pick-up blade system with 1 position Working table with 8 supports 1 vacuum pump with a capacity of 250 m3/h Console with PC Eye-M Pro Software: Maestro Active Remote control TecPAD Chip conveyor PRO-SPACE safety system Approximate weight: 6695 Kg.

Condition: like new (used), DizArt CNC Router 1325 with Vacuum Table and 3.3 kW Spindle For sale is a DizArt CNC Router, model 1325, manufactured in December 2020. The machine is available immediately and can be inspected and tested at its current location in Antunovac, Croatia. The CNC router has a working area of 1,300 × 2,500 mm and is equipped with a vacuum table and vacuum pump. Technical specifications: Manufacturer: DizArt d.o.o. Machine type: CNC router Model: 1325 Serial number: 220 Year of manufacture: December 2020 Working area: 1,300 × 2,500 mm Machine rated power: 6 kW Power supply: 380 V Frequency: 50–60 Hz Vacuum table Vacuum pump Steel machine construction Spindle specifications: Spindle manufacturer: Teknomotor Kledpfxjznbr Io Acfjw Spindle type/part number: COM31600453 Spindle serial number: 190007 Spindle power: 3.3 kW Rated voltage: 380 V (star connection) / 220 V (delta connection) Rated current: 7.9 A at 380 V / 13.7 A at 220 V Base frequency: 300 Hz Maximum frequency: 400 Hz Base speed: 18,000 rpm Maximum speed: 24,000 rpm Duty type: S1 Protection rating: IP54 Condition and availability: Year of manufacture: 2020 Condition: as new Availability: immediately Inspection and test run possible by prior arrangement Price: €16,000 plus VAT

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 165 mm, number of axes: 4, This 4-axis BIESSE Rover K1232 was manufactured in 2017. It features an extensive X-axis working range of 3,260 mm and a Y-axis working range of 1,260 mm. The machine is equipped with a tool magazine capacity of 16 positions and an electrospindle power of 19 kW. If you are looking to get high-quality CNC machining capabilities, consider the BIESSE Rover K1232 CNC processing center we have for sale. Contact us for further details. Kedjzm Uqhepfx Acfolw • Machine design: Gantry • Tool magazine capacity: 16 positions • Electrospindle power: 19 kW • Total power: 20 kW

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Machining process: Drilling, Milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Grooving unit Number of grooving units: 1 Installation position: Top Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Ksdszmvqvepfx Acfslw EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487

Condition: used, Year of construction: 2015, operating hours: 19,402 h, total height: 2,250 mm, total length: 2,500 mm, total width: 1,900 mm, Colour: White Empty weight: 1.600 kg Price: On request - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AB/224221 - Operating hours: 19402 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: Kodpfjzmvftex Acfjlw - - Number of controlled axes [pcs.]: 1 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 5.6 - Type milling table: Flat table - Tool clamping system: ISO30 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 11 - Saw unit present: Yes - Tool changer positions [pcs.]: 0 - System/software: SCM Maestro - Safety feature: Door interlock switches, Safety light curtain - Tools included: Yes - CNC options: Barcode reader, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 3960 - Table width [mm]: 840 - Working range X [mm]: 3050 - Working range Y [mm]: 900 - Z-axis working range [mm]: 60 - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 10.0 - Installed length [mm]: 4500 - Installed width [mm]: 1900 - Installed height [mm]: 2250 - Transport dimensions: 2500mm x 1900mm x 2250mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2001, Model SCM RECORD-130 TV Year of manufacture: 2001 Work table: 2930 x 1245 Spindle: HSK63F, 11 kW Vector axis Laser for positioning the suction cups 4x lifting devices Conveyor belt for chips 12x tool changer Kljdpfxjzmmmbo Acfow Milling spindle for lock case or saw F18 drilling head Clamping devices

Condition: ready for operation (used), Year of construction: 2022, number of axes: 4, This 4-axis BIESSE Brema EKO 2.2 was manufactured in 2022. It is a vertical CNC processing center designed for precision and efficiency. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Brema EKO 2.2 machine we have for sale. Contact us for further details. Kedpfx Acozmhidjfelw

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, operating hours: 65 h, travel distance X-axis: 3,720 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 225 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 85 mm, number of axes: 3, number of slots in tool magazine: 15, actuation type: electric, total height: 2,288 mm, total length: 9,766 mm, total width: 4,789 mm, table length: 3,720 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, We are offering this Felder profi H80 nesting machining center, model year 2022, which was previously used as a demonstration unit. Manufacturer: Felder Model: profi H80 Year of manufacture: 2022 Condition: ex-display machine Type: nesting machining center Kodozl Tyrjpfx Acfslw If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, NEXT 3121 VECTOR 7 AI – CNC machining center for nesting with integrated artificial intelligence (NEXT.AI). Designed and manufactured in Poland. Robust, welded steel construction, heat-treated at 600°C, provides high vibration resistance and minimal deformation, ensuring exceptional cutting accuracy. WORKING AREA AND DRIVE - Working area: 2130 x 3130 mm (sheet format up to 2100 x 3100 mm) - Z-axis stroke: 250 mm - Max. X/Y travel: 80 m/min; working X/Y travel: 25 m/min; working Z travel: 12 m/min - NEXT ST 1 kW servo drives with absolute encoders and battery backup – no need for reference jogging - SHIMPO planetary gearboxes, precision rack and pinion, and linear guides SPINDLE AND TOOLS - NEXT 9 kW spindle, 24,000 rpm, HSK63 - HEMPOINT frequency inverter, NextS controller - Hybrid tool magazine: 12-position rotary + 12-position linear - Automatic tool length sensor with air blow - EA-32 tool holders, HSK63 collets TABLE AND VACUUM - 2-chamber, 9-section vacuum table with intelligent zone control - NEXT_V450 vacuum system with a capacity of 450 m3/h (7.5 kW), automatic vacuum regulation via frequency inverter - Material positioning using pins and alignment strips - Automatic central lubrication system for linear motion AUTOMATION AND AI - NEXT.AI assistant integrated with the operator panel – process optimization and G-code generation Kjdpfx Acezlz Rlefslw - CleanFlow – automatic cleaning of moving parts - AirJet Sync system – 4 nozzles to assist chip removal - NEXT LED LIGHT – status and machining progress indicator - VisionEdge 3.0 – 24-inch screen, 3 cameras, voice prompts - LIDAR safety sensors in the basic version CONTROL AND CONNECTIVITY - Touchscreen control panel, ABB electrical components - Built-in 5G modem – remote diagnostics and service - Wireless QUICK START remote and NEXT WATCH remote (smartwatch) - Handwheel with project simulation function - NextMonitor app (iOS) – remote monitoring 24/7, lifetime access SOFTWARE - CUT2DPRO nesting software (straight-line and curved optimization) INSTALLATION DATA - Power supply: 3x400 V + N + PE - Compressed air: 6-8 bar, 300 l/min - Dust extraction: 3000-8000 m3/h - Machine weight: approx. 4800 kg - Industrial cabling WARRANTY AND DELIVERY - Warranty: 36 months - Lead time: 8-12 weeks - Training at the customer's site, CE declaration of conformity - Fully modular machine – upgrade options available (infeed/outfeed table, drilling unit, labeling machine, unloading robot) even up to 4 years after installation ADDITIONAL OPTIONS (surcharge) - 5+4W 1.5 kW drilling unit and Hiteco TF.C.12V (12+4+2) drilling unit - Infeed/outfeed table, label printer/labeling machine - NEXT ROBO XT (Yaskawa GP180) robotic manipulator for automated unloading Manufacturer: NEXTCNC Sp. z o.o., Poznań, Poland.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3110 mm Working area Y: 1620 mm Working area Z: 180 mm 3-axis electrospindle, 9.5 kW Vertical drilling spindles: 13 Horizontal drilling spindles X: 6 Kljdpfx Aszltgrecfjw Horizontal drilling spindles Y: 4 Blade for grooving in the X direction 14-position tool changer on the machine side Approx. 14-position tool changer on the machine side Work table with 6 supports Laser positioning device for suction cups with Maestro CNC and Xilog Plus Panel Mac Touchscreen operator console SCM eye-M PRO-SPACE safety system 1 vacuum pump at 90 m3/h Weight approx. 3800 kg Includes door routing unit

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 0-250-17-2346, functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 300 mm, number of axes: 4, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 4,300 mm Travel range, Y-axis: 2,250 mm Travel range, Z-axis: approx. 300 mm Main spindle Power: 10 kW Tool interface: HSK-F63 Spindle speed, max.: 24,000 rpm Axis configuration Controlled CNC axes: 4 Interpolating C-axis Servo-controlled Z-axis Tool changer Number of positions: 14 Tool holder: HSK-F63 Drilling unit Number of drilling spindles: 12, vertical Integrated groove saw Vacuum system Vacuum pumps: 3 x Becker MM1322 AV Total air flow: approx. 300 m³/h MACHINE DETAILS CNC control Version: WoodWOP 6 Beckhoff Industrial PC Beckhoff TwinCAT CNC Bosch Rexroth IndraDrive Digital Servo Drives SERCOS Motion Control Supply voltage: 415 V Frequency: 50 Hz Phases: 3 Full-load current: 61 A Main fuse: 80 A Control voltage: 24 VDC EQUIPMENT Ksdpfezld Iyox Acfjlw Matrix vacuum table 10 vacuum zones Heavy-duty gantry construction Automatic central lubrication system Twin extraction hoods with automatic positioning

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,550 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 750 mm, number of axes: 5, spindle motor power: 7,500 W, spindle speed (max.): 18,000 rpm, This 5-axis PADE VELUX CNC Wood Machining Centre was manufactured in 2011. It features an impressive X-axis travel of 3,550 mm, Y-axis travel of 1,800 mm, and Z-axis travel of 750 mm. The machine includes two tandem worktables with six pneumatic clamps, along with two electrospindles for enhanced performance. If you are looking to get high-quality wood machining capabilities, consider the PADE VELUX machine we have for sale. Contact us for further details. • Worktables: 2 tandem worktables with 6 pneumatic clamps Kledpfx Acszldlfefow • A-axis: continuous rotation • C-axis: ±370° rotation • Rapid speeds: X 100 m/min; Y/Z 60 m/min • Tool positions: 2 + 2 with collet tool holders • Tool holder standard: EN430E / DIN 6499 • Tool interface: cylindrical • Collet size: ER32 (tool diameter 1–20 mm) • Spindles: 2 electrospindles, 7.5 kW each • Operating air pressure: 6 bar • Compressed air consumption: 300 Nl/min

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Features and technical specifications: - For conventional nesting machining with wear plate - Machine frame in welded construction with ground and hardened prismatic guides for the travelling column, machining head and consoles Kljdpfx Acozlbrpjfsw - Travelling column in gantry design - Rack and pinion drive, helical, in the X and Y directions, Ball screws in the Z-axis for precise positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. travel distances: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height of DYNESTIC table Z = 100 mm from the top edge of the table (excluding wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid markings - Continuous grooving in the X and Y directions - Groove spacing: 50 mm - Includes 25 metres of sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - individually selectable - U-shaped layout - 5+4 in the X-direction and 4 in the Y-direction - 32 mm grid - Max. drill bit diameter: 35 mm - Total drill bit length: 70 mm from the bolt-on end (depending on panel thickness) - Spindle extension stroke: 70 mm - Direction of rotation: alternating clockwise and anti-clockwise - n(max): 1000 – 4400 rpm, continuously adjustable - Mounting: M 10 thread - 11 mm interference fit - No tools required, no mounting bracket - 6 horizontal spindles: - 2 double drilling spindles in the X-direction - 1 double drilling spindle in the Y-direction - Mounting: M 10 thread, 11 mm interference fit - Maximum total drill length: 63 mm from the threaded end - No tools required, no mounting bracket - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1,000 – 24,000 rpm, infinitely variable - Maximum output at 12,000 rpm to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for clockwise-rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Maximum tool weight: 6 kg (including holder) - Tools: milling and grinding tools, max. Ø 160 mm - Safety guarding in accordance with the CE standard - Safety fencing on the sides and at the rear - Vacuum pump: 500 m³/h, dry-running - Operator safety ensured by photoelectric sensors in the front section of the machine - Hand-held control unit for remote control of the machine with the following operating functions: - Start/stop of the machining programme - Speed control of the machining cycles - Reset button - Manual feed / rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software (1 machine licence), comprising: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating Part variants using macro technology - CAMPUS MT Manager - CAMPUS Workcentre - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined lubrication intervals - Additional dust sealing via positive pressure in each guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y and Z directions - for all ball ...

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Kodpszk Npgefx Acfjlw Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: used, Bray BRAL FC4015 High CNC 5 X. Under power at site available now., Mainly used for 5 axes machining of models and moulds including; plastics, composites, aluminium, alloys. Heidenhain i TNC 530 HSCI control, 12 station ATC, HSK A63 Spindle, working range 3990mm x 1670mm x 981mm. max dimension of work piece 3190mmx 870mm x 573mm. machine dimensions 7050mm x 3690mm x 3880mm, weight 10800 kgs. Kjdpozk Ibnsfx Acfolw

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 300 mm, workpiece height (max.): 300 mm, table length: 2,500 mm, table width: 1,300 mm, We are offering this well-maintained CNC-STEP T-REX N-1325 CNC portal milling machine, manufactured in 2022. Manufacturer: CNC-STEP Model: T-REX N-1325 Year of manufacture: 2022 Condition: good Travel range: 1300x2500mm Kljdpfxozkp A Hs Acfsw Z-axis clearance: 300mm Milling motor: HQD spindle, Model GDF46-18Z/3.5 3.5KW, max. speed 18000 rpm Vacuum pump with 5.5KW power The milling machine operates smoothly and without any errors. A complete set of ER25 collets (3-16mm) is included. Mobile tool length sensor This year, the control PC was replaced because the old one could not be upgraded from Windows 10 to Windows 11. Dust extraction shoe, 3D printed. The original dust extraction shoe unfortunately broke several times, but it can be purchased from CNC-Step. Available from July 27, 2026. Inspection is welcome at any time. Shipping from warehouse, free loading.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Work in X, Y, Z axes Working area 3100 x 1340, Z axis = 180 mm Horizontal drills on X axis – 6 pcs Horizontal drills on Y axis – 4 pcs Vertical drills on X axis – 8 pcs Klsdpfjzi Tytsx Acfew Vertical drills on Y axis – 6 pcs Two tool magazines: side – 11 positions and transfer – 14 positions Grooving saw on X axis Spindle 8 kW, air-cooled, 600–24,000 RPM, HSKF63 Becker Vacuum Pump 2.2 kW Option for dual-field operation X axis speed – 25 m/min (programmable) – 56 m/min (vector) Y axis speed – 50 m/min (programmable) – 56 m/min (vector) Z axis speed – 15 m/min

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, number of slots in tool magazine: 5, total height: 3,100 mm, overall weight: 7,500 kg, table length: 4,000 mm, table width: 1,200 mm, spindle motor power: 7,500 W, spindle speed (max.): 18,000 rpm, This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details. • CNC Control: NUM CNC Control • Drive System: Siemens SIMODRIVE 611 • Maximum Workpiece Length: 4000 mm • Minimum Workpiece Length: 150 mm Kodpfxszi Avdo Acfelw • Maximum Workpiece Width: 1650 mm • Minimum Workpiece Thickness: 10 mm • Maximum Workpiece Thickness: 65 mm • Drilling Spindles (X): 5 • Drilling Spindles (Y): 11 • Maximum Drilling Diameter: 45 mm • Main Spindle Power: 7.5 kW • Main Spindle Motor: Water-cooled • Tool Holder: HSK F63 DIN 69893 • Feed Drive Motor Power: 4 kW • Feed Speed: 1,500–18,000 mm/min • Maximum Tool Weight: 5 kg • Maximum Tool Clamping Force: 10,000 N • Operating Voltage: 400 V ±5% • Supply Voltage: 3/N/PE, 400 V, 50 Hz • Frequency: 50 Hz • Total Connected Load: 33 kVA • Rated Power: 41 kW • Rated Current: 62 A • Connection Cross Section: 16 mm² • Control Voltage: 24 V • Control Current: 52 A • Compressed Air Pressure: 6–10 bar • Air Connection: 1/2" • Required Air Consumption: 28 m³/h • Dust Extraction Connection: Ø100–300 mm • Air Flow Ø100: 14 m³/min • Air Flow Ø140: 28 m³/min • Air Flow Ø160: 36 m³/min • Air Flow Ø180: 46 m³/min • Air Flow Ø200: 56 m³/min • Air Flow Ø280: 105 m³/min • Air Flow Ø300: 127 m³/min • Number of Dust Extraction Ports: 1 • Machine Condition: Disassembled but fully functional Optional Equipment, not included: • Vacuum block suction cups (aluminum) and sliding console • Two milling spindles for synchronous milling with integrated tool changers • Safety fence with associated safety mats • Control cabinet and operating unit • Waste conveyor belt for milled sections

Condition: ready for operation (used), Year of construction: 2009, number of axes: 3, This 3-axis BIESSE Skipper 100 was manufactured in 2009. It features a versatile working range with a maximum length of 3,000 mm and a width of 1,000 mm. The machine is equipped with 78 independent drilling spindles, allowing for efficient vertical and horizontal drilling, as well as routing and grooving capabilities. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Skipper 100 machine we have for sale. Contact us for further details. • Workpiece capacity • Length: 90 – 3,000 mm • Width: 70 – 1,000 mm • Thickness: 8 – 60 mm • Working ranges • X-axis • Vertical drilling: 0 – 3,000 mm • Horizontal drilling (X and Y): 0 – 3,000 mm • Continuous routing: 0 – 2,500 mm • Partial routing: 0 – 3,000 mm • Continuous grooving with saw (X direction): 0 – 2,500 mm • Partial grooving with saw (X direction): 0 – 3,000 mm • Y-axis • Vertical drilling: 0 – 1,000 mm • Vertical drilling with 32 mm system: 32 – 1,000 mm • Horizontal drilling in X: 0 – 1,000 mm • Horizontal drilling in Y: 90 – 1,000 mm • Routing: 0 – 950 mm • Grooving with saw (X direction): 112 – 1,000 mm • Z-axis • Material thickness: 0 – 60 mm • Machine configuration and features • 78 independent drilling spindles in two mirrored machining units: • 39 spindles in the upper unit • 39 spindles in the lower unit • Per machining unit: • 29 vertical drilling spindles (19 along X, 10 along Y, 32 mm spacing) • 8 horizontal drilling spindles along X (4 with dual output) • 2 independent horizontal drilling spindles in X • 2 independent horizontal drilling spindles in Y • 3.5 kW HSK electrospindle, 6,000 – 18,000 rpm • Upper and lower work (pressure) tables • Upper and lower machining units • Electronic thickness control • Central automatic lubrication • PC-based CNC control (Windows XP 600 with Soft CN) • Safety system Additional equipment Kjdpfx Aozh H Iujcfelw • Roller loading table • Right-side belt unloading conveyor

Condition: used, Year of construction: 1997, total height: 1,400 mm, total length: 2,100 mm, total width: 1,100 mm, Colour: White Empty weight: 250 kg Ksdpfxjzh E U Ho Acfslw Price: On request - Year: 1997 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 2/97 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Voltage [V]: 230 - Transport dimensions: 2100mm x 1100mm x 1400mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2010, functionality: fully functional, Designation: SCM machining center Type: Accord 40 CNC-controlled drilling and milling center Year of manufacture: 2010 Technical basic data: Working area approx. 3650 x 1560 mm Max. workpiece height 330 mm Speed X-axis 75 m/min Speed Y-axis 75 m/min Speed Z-axis 30 m/min Equipment (see data sheet) Space requirement approx. 8700 x 6600 mm Software: CNC control, see description Ksdpfx Acszhv H Hofolw Price ex works: Detailed equipment details can be found in the photos and upon request. Information without guarantee.

Condition: used, Year of construction: 2008, total length: 26,000 mm, Colour: White Empty weight: 9.000 kg Price: On request - Details: - └ Description: Includes the input/output system - Year: 2008 - Documentation available: Yes - └ Type Documentation: Technical data, Operating system, Electrical diagrams, Maintenance history, Assembly manual, Parts book, User manual - └ Language: NL - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: No - Serial number: - Number of milling spindles [pcs.]: 2 Kodpfx Acozhr Rzsfjlw - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 36 - System/software: WoodWOP - Safety feature: Enclosed fence, Door interlock switches, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Elmo Rietschle - └ Type: 2BL2141 - └ Connection diameter [mm]: 50 - Tools included: Yes - CNC options: Loading system, Label machine, Manual control, Unloading system, Offcut conveyor - CNC documentation available: USB stick - Table length [mm]: 2500 - Table width [mm]: 1500 - Working range X [mm]: 5800 - Working range Y [mm]: 1600 - Z-axis working range [mm]: 535 - Voltage [V]: 400 - Current consumption [A]: 91 - Installed length [mm]: 12200 - Installed width [mm]: 9000 - Installed height [mm]: 3500 - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 390.829, functionality: fully functional, operating hours: 6,700 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 5,600 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 75 kg, number of axes: 1, number of slots in tool magazine: 1, actuation type: electric, total height: 1,409 mm, total length: 1,484 mm, total width: 2,325 mm, table width: 1,000 mm, Equipment: CE marking, For sale due to acquisition of a new machine: our Gannomat Protec 571 CNC machining center, purchased new in 2018. The Gannomat Protec CNC machining center is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for producing furniture components and panels. Its advanced automation and robust construction ensure repeatable results and significant time savings in production. This machining center is especially suitable for workshops aiming to optimize productivity and achieve seamless machining processes. Technical specifications: - Workpiece width X: 60 - 1000 mm - Workpiece length Y: 250 - 5600 mm - Workpiece height Z: 6 - 60 mm - Workpiece weight: 75 kg - Rapid machining: 21 drilling spindles - Stable grooving unit: 8.3 mm saw blade width - Powerful milling unit: 5.5 kW (S1), with reversible rotation - Compact footprint: Less than 3.3 m² Including with the machine: - Drilling tools and 1 pc. HSK63 chuck and tool for modern joinery applications. Kledpfxszhrdzs Acfow Optional software: - Gannomat Editor office software: €1,000 (installation and activation by Gannomat for an additional fee) - DXF postprocessor for efficient operation: €1,000 (installation and activation by Gannomat for an additional fee) ATTENTION: Low operating hours. The price of the machine does not include VAT.

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, Hello, Kodpfozhl Iaex Acfjlw For sale: Rover 22 CNC milling machine. Needs repair. It does not properly load and unload tools from the tool magazine. It has been operating with only one tool for the past period. The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Contact by phone between 7:00 AM and 3:00 PM.