Turenwerke Sp. Z O.o.

Year of construction: 1999, condition: used, Cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg Ncsdpoywx D Nofx Abvsp

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm Ncsdpfx Aoywxywebvop With side stops Weight: about 350 kg

Condition: used, Year of manufacture: 2011 Automatic cleaning machine for PVC profile corners, equipped with lateral support arms. automatic cycle upper/lower units for corner cleaning Nodpfeywu A Iex Abvocp Machine in working condition, regularly maintained, complete with manual.

Year of construction: 2012, operating hours: 3,496 h, condition: excellent (used), functionality: fully functional, Quadra L1 in excellent condition with extremely low operating hours for sale. Optionally available with superstructure upon request! Machine demonstration possible with profiles. Quadra L1 through-feed center with comprehensive equipment: - 6 spindles, 360° rotatable around the profile for machining at any angle - 7.5-meter bar loading magazine - 600 mm saw and notching unit - Profile alignment device - MG Pilot handheld control unit - 2 front steel conveyor belts for scrap removal - Slice software - CamPlus / Job software CNC 12-axis machining center designed for milling, drilling, and cutting operations on aluminum and light alloys. The QUADRA L1 features an automatic tool magazine and a push-feed system for profiles up to 7500 mm, equipped with a profile clamping gripper drive. The collet movement returns the feeder to its initial position, allowing the loader to prepare the next profile simultaneously. In the central area are the milling and cutting modules. The 4-axis CNC milling module is equipped with 4 up to 6 electrospindles and allows complete contour machining regardless of profile orientation. The 3-axis CNC cutting module includes a Ø 600 mm blade with downward stroke movement. The QUADRA L1 also includes an automatic outfeed unit from the cutting unit to the unloading magazine. The unit is equipped with a magazine with cross conveyors for unloading finished pieces up to 4000 mm (optionally 7500 mm). The machining unit can be optionally fitted with a cabin that soundproofs the central working area, thereby protecting the operator and reducing noise emissions. Machine demonstration available! Nsdpfxsywpcvj Abvocp

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: 122000029, We are offering this very well-maintained elumatec SBZ 122/75 profile machining centre, year of manufacture 2022. Type: 122/75 Serial number: 122000029 Year of manufacture: 2022 Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current: 20 A Short-circuit withstand strength (Ik/SCCR): 5 kA Nedpeywku Tofx Abvjcp Compressed air pressure: 7 bar Weight: 3,800 kg Maximum profile diameter: 180 mm Spindle speed: 6,000 rpm Maximum speed: 20,000 rpm If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2005, condition: used, CNC Machining Center 4 Axes – FOM (Aluminium/Steel Profiles) Configuration: 4-axis CNC Working length (X): 7,030 mm Condition: Working, maintained - Main Features Nodjywhf Nopfx Abvocp CNC machining center designed for drilling and milling operations on aluminium and steel profiles, ideal for window and industrial profile production. 4-axis spindle (0° / 90° / 180°) for multi-side machining Electrospindle 4 kW – up to 12,000 rpm Tool holder: ISO 30 DIN 69871 6-position automatic tool magazine 6 pneumatic clamps (manual positioning) THK linear guides for high precision - Control & Software Software: FomCam + Prof2 (Windows XP) Easy programming with automatic CNC generation Movable control console (PC + display + keyboard) Barcode reader connection Remote control capability 📏 Technical Data X-axis: 7,030 mm Y-axis: 1,100 mm Z-axis: 425 mm Machine dimensions: 8,307 x 1,875 x 2,460 mm Weight: 3,200 kg - Equipment Forced air spindle cooling Inverter-controlled spindle Automatic lubrication Protected tool magazine with rotary system - Machine ready to work, ideal for aluminium profile machining and window production.

Condition: new, Year of construction: 2025, functionality: fully functional, Phantomatic T 3 Star with extraction system and very good equipment The machine is equipped with the following: - Full enclosure with lighting - Extraction system with oil separator - MG Pilot handheld control unit - 8 tool positions - Camplus Ncjdpfx Absyvu A Sevop - Shape - Additional right-side reference stop - Overlength machining capability - Sound-proof enclosure - Automatic multistep machining control - Teleservice - Voiláp connect

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Swiveling support table from 0° to 180°, enabling 3-side machining in one setup. 2 selectable spindle speeds, 6,000 or 12,000 revolutions per minute, allowing both steel and aluminum profiles to be processed. 4 pneumatically controlled copying pins. Nodpfxsyuy S Io Abvscp Pneumatic material clamping. Minimum quantity lubrication system. Profile width: 30-120 mm. Profile height: 50-100 mm. Bar length: 490 - 3,000 mm. Weight: approx. 350 kg.

Year of construction: 2014, condition: good (used), 5-axis machining center Ncodpfjyt Nmljx Abvjp usefull lenght 10500 mm automatic positioning of clamps automatic toolchange

Year of construction: 2014, condition: excellent (used), Elumatec SBZ 130 is a 3-axis profile machining centre designed for efficient processing of aluminium, steel, and stainless steel profiles. All operations, such as milling, drilling, and tapping, are performed on a stationary profile, which protects its surface. Axes: 3-axis control, with tool spindle as an additional axis. Machining length (X-axis): 7200 mm Travel (Y-axis): Typically 485 mm (max. 60 m/min). Travel (Z-axis): Typically 340 mm (max. 60 m/min). Spindle speed: Standard 6000 rpm or optionally high-speed spindle (18,000 rpm). Nsdpsyt H Uyefx Abvocp Spindle power: 5.5 kW. Tool magazine: Integrated 8-position turret or 4 angle heads, ensuring short tool changeover times. Control: Windows operating system with eluCam software. 18.5” PC panel with USB ports and network connection. Clamping system: Automatic positioning of pneumatic clamps. Compressed air supply: 7 bar. MACHINE: Prepared tooling dedicated for PVC+STEEL machining: - tool holders, - reducer for steel machining, - special tools with chip breaker, - dedicated programs for machining door profiles,

Year of construction: 2007, condition: ready for operation (used), Sale of CNC Machining Centre – Elumatec SBZ 130 Manufacturer: Elumatec Model: SBZ 130 Year of Manufacture: 08/2007 Price: EUR 29,000 excl. VAT Condition: Very good, regularly serviced by authorized Elumatec service in the Czech Republic Availability: Immediately available Documentation: Photos and videos of the machine available Machine Description Three-axis CNC machining centre designed for processing aluminium and steel profiles. The machine enables efficient serial production thanks to pendulum (swing) machining mode (right/left working zone). Particularly suitable for the manufacturing of window, door, and façade systems. Sales Advantages Ncodjyt E D Topfx Abvsp - The machine has been regularly maintained by the authorized Elumatec service in the Czech Republic. - Robust and reliable construction with an approximate machine weight of 5.5 t ensures stable and precise machining. - Pendulum machining mode significantly increases production productivity. - The machining centre is fully functional and ready for immediate deployment. Technical Specifications - Number of axes: 3 - Tool turret head: 8 tools - Maximum machining length: 6,500 mm - Pendulum machining mode: yes (right/left side) - Automatically positioned clamps: 8 pcs - Power consumption: 8.5 kW - Spindle power: 5.5 kW - Maximum spindle speed: 6,000 rpm - Clamping pressure: 7 bar - Travel speed: - X axis: 34 m/min - Y + Z axes: 18 m/min - Machine weight: approx. 5.5 t Additional Information - Additional photos and video of the machine available on request - Personal inspection possible by prior arrangement

Year of construction: 2018, condition: good (used), 4-axis machining center 4 pneumatic clamps with automatic positioning automatic tool change Ncjdpfx Abjyr R Ibsvsp 2 pneumatic endstops software 3D camplus

Year of construction: 2010, condition: used, functionality: fully functional, Elumatec SBZ 130 CNC-controlled milling machine, 7,000 mm version 8 clamps Tool changer with 8 positions on the milling head Nodpfxjyr Rubo Abvocp

Year of construction: 2018, condition: used, functionality: fully functional, Used Machine For the economical and efficient machining of aluminium, plastic, and steel profiles. All operations such as milling, drilling, and thread cutting are performed with the profile bar stationary to protect the profile surface. Continuously adjustable A-axis positioning from -120° to +120° Linear guides for clamp displacement, high spindle performance Machining results are improved by intelligent control technology. Rapid positioning of the machining unit at up to 120 m/min via dynamic servo drives. Thread cutting without compensating chuck Automatic clamp detection and positioning Automatic tool changer with twelve tool stations (without tools) Modern 4-axis control No reference run required for the main axes due to use of absolute encoder systems Collision avoidance through automatic clamp detection and positioning Power-torque milling motor with closed-loop speed control for short spindle acceleration and braking times Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Energy recovery via intermediate circuit coupling of axis drives with feedback and buffering of braking energy Green-Line cooling unit for the control cabinet with reduced energy consumption Windows operating system 15" flat-screen display, USB ports, and network connection Simple and convenient program entry via eluCam at the operator terminal, even during machining Remote maintenance via TCP/IP with Internet access Machine equipment: Cabin for operator protection Four horizontal pneumatic material clamps One material stop, left HSK-F63 tool holder Chip disposal via chip trays Minimum quantity lubrication High-performance cutting fluid Handheld control device Depth gauge Technical data: Max. machining length without end face machining: 4,050 mm X-axis travel: 4,176 mm, Vmax. 120 m/min Y-axis travel: 1,040 mm, Vmax. 60 m/min Z-axis travel: 540 mm, Vmax. 30 m/min Machining directions: 3+2 (top, rear, front) Ncedpfx Aboyr H Abevsp Positioning accuracy: ±0.1 mm Milling spindle speed: max. 20,000 rpm Milling spindle output: 7 kW, SI (water-cooled) Tool holder: HSK-F63 Automatic tool change Twelve tool stations in automatic magazine Disc milling cutter diameter: 120 mm Tool length (from taper): max. 150 mm Automatic clamp displacement Basic clamp (with round guide) Software: eluCam Compressed air connection: >7 bar Electrical connection: 400 V, 50 Hz, 22 A Air consumption per minute: approx. 185 l with spray Machine accessories: 1x 122200809 Full enclosure SBZ122/7x (rear wall + roof) 1x 136350823 Complete HSK-F63 d16 L=155 holder for disc milling cutter 1x 150379500 Disc milling cutter D=92x6.0 mm Z=14 d=16, carbide teeth 1x 122203105 Right-hand stop SBZ 122170171173 with 2nd clamping circuit, for overlength processing 1x Various used tool holders and cutters 1x ESTA Oilmac 3000 extraction unit, used Machine software: 1x 398206100 eluCad 1x 122206150 License for connection to eluCad 1x 398206201 eluCad option, data import package for ECW, NCW, and V6 files

Condition: good (used), Year of construction: 2004, machine/vehicle number: 1400040151, functionality: fully functional, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, CNC machining centre Elumatec SBZ140 Year of manufacture: 2004 Manufacturer: ELUMATEC Nodpjyr Axxofx Abvocp The machine is in working condition. For sale due to purchase of a new machine.

Condition: excellent (used), Year of construction: 1995, As-new notching milling machine from a training workshop Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Ncsdpfeyrh Rgjx Abvop

Year of construction: 2000, condition: excellent (used), As-new lock copy milling machine for PVC and aluminium profiles from a training workshop Key features: - 3-sided machining of sash and frame profile bars in a single clamping, e.g. for profile cylinders, handle holes, and lock cases - Equipped with 4 tracing pins for flexible and simple use of the template system - Convenient insertion of the profile bar without interfering milling units - Manual profile bar rotation device for 3-sided machining - Optimum machining quality due to the design-based use of short tools Nodpfx Aboyrh Ncevocp Max. workpiece cross-section (W x H): 200 x 100 mm Milling area (L x W): 315 x 130 mm Plunge depth: 200 mm Speed: 12,000 rpm Drive power: 1.5 kW at 400 V Machine dimensions (L x W x H): 1260 x 820 x 1650 mm Machine weight: 340 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2015, condition: excellent (used), 4-axis machining center Ncodpoyrg Nnjfx Abvop automatic positioning of clamps 4 pneumatic clamps automatic toolchage 2 pneumatic end-stops 3d software Camplus

Condition: excellent (used), 4-axis CNC machine Ncjdpjyrguqsfx Abvep usefull lenght 7500 mm Dynamic pendular over 2 zones 8 pneumatic clamps with CNC positioning automatic tool change Software 3D Camplus

Year of construction: 2009, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Nedeyqyaqopfx Abvecp Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with USB connections Speed continuously adjustable up to 22,000 RPM handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 light barrier ranges and 2 material stops, enabling pendulum operation A total of 8 material clamps Spindle in good condition, spindle-insertion force: 12 kN Weight: approx. 2,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Type RLK: Roller conveyor length stop with retractable stop carriage to the rear. Ncsdpfxoypwkwe Abvsp Length – 3 m

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rotational speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 480 mm Z-axis travel: 325 mm Max. spindle speed: 15,000 rpm Spindle power: 5.5 kW Tool holder: BT 30 MACHINE DETAILS Nsdpfx Ajypbmijbvjcp Tool changer: 8 positions EQUIPMENT Tools

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 1,909 h, Phantomatic X 6 HP with only 1,909 operating hours! Machining center with 4 CNC-controlled axes for processing profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 7.7 m in length. Special equipment: - Barcode scanner Ncsdpfx Aeyn Sgqebvsp - H+P axes with end stops and clamp displacement - Profile length measuring device - CamPlus - Four-sided machining - MG Pilot hand control unit Operating Mode 1: Utilization of the entire available machining length of up to 7.7 m. Operating Mode 2: Pendulum operation, which splits the machine into two machining zones. This allows for alternate loading and unloading on one side while processing continues on the other. On the X6 HP model, the positioning of the clamps is achieved using two additional axes, independent of the main processing time. The machine is equipped with an automatic tool changer with 8 positions moving along the X-axis gantry, accommodating 1 angle head and a disc cutter for five-sided machining of the workpiece. The 4th CNC axis enables rotation of the milling spindle from 0° to 180°, with positioning at any intermediate angle. This allows the machine to perform machining operations on the top and sides of the profile at any angle within its range. In addition, a movable work table facilitates loading and unloading of the piece and significantly increases the workable cross-section. Machining center suitable for dynamic pendulum operation 4-axis X-milling spindle head The milling spindle with 7 kW S1 high-torque drive enables heavy-duty machining. The movement of the spindle along the A-axis allows rotation from 0° to 180°, so the profile can be machined on 3 sides without repositioning. Can be used for certain types of steel press profiles as well as aluminum profiles, thanks to a lubrication system that can be adjusted via software and whose dual tank allows the use of both minimum quantity diffusion oil and micro-mist with oil emulsion. Very little used and in excellent condition!

Year of construction: 2009, condition: used, Technical Data Processing Length max. [mm] : 7,200 Nksbq Eeynir Dory Alsu Dimensions [mm] : 9,000 x 2,000 x 2,700 Weigh PBX AL [kg] : 3,500 Pneumatic Operation Pressure [bar] : 6 Positioning Accuracy [mm/1000mm] : ± 0.1 mm Rotation Angle A axis max. [°] : 180 Capacity Work Spindle [KW] : 7.5 at 12.000 min-1 Speed Work Spindle max. [min-1] : 24,000 Tools: Tool Length max. [mm] : 160 Tool Ø up to max. Length max. [mm] : 50 at max. Length max. [mm] : 120 Tool Holding Fixture : SK 30 Electrical Connection : Nominal Voltage/Frequency [V/Hz] : 400/50 Number of Phases/Zero Conductors/Earth Conductors : 3/N/PE Njdoynkkujpfx Abvocp Nominal Current Consumption [A] : 35

Condition: used, Year of construction: 2007, Technical data • Milling spindle speed: From 2800 to 12000 rpm • Interpolated working movements for the X and Y axis, CNC Ncodpsyni Niofx Abvsp • Motorised lowering of the Z axis via buttons with speed control via a rotary potentiometer • Electrical equipment with graphic display for simple and intuitive use of the program with graphical indication of the shapes to be carried out and the possibility to program a work sequence at the 3 machining levels • Traversing of the X and Y axis with brushless motors and high-precision drives; both are mounted on racks with helical teeth without play • Work surface with pneumatically controlled rotation from -90° to +90° • Height of the work surface: 850 mm • Tool lubrication via manually adjustable mist oiler • Maximum operational safety provided by deadman switch and buttons • Pneumatic horizontal clamps, can be moved along the work surface • Double operating pressure with safety valves • Automatic correction of the tool diameter via software • Milling capacity: X = 2600 mm Y = 315 mm Z = 230 mm • Three-phase milling spindle: 4 KW - 2800 rpm. - 230/400 V 50 Hz