Used Roboform for sale (12)

Condition: used, Year of construction: 2001, operating hours: 17,511 h, functionality: fully functional, machine/vehicle number: 1-5341/641134, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,690 mm, total length: 1,900 mm, table width: 600 mm, quill stroke: 400 mm, quill diameter: 100 mm, quill travel distance: 400 mm, type of input current: three-phase, distance table to quill: 400 mm, table length: 800 mm, table height: 340 mm, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 320 mm, input voltage: 380 V, overall weight: 2,500 kg, table load: 500 kg, input frequency: 50 Hz, working range: 500 mm, tank capacity: 500 l, input current: 5 A, stroke length: 400 mm, Equipment: documentation/manual, Charmilles Roboform 35P Wire EDM Machine – Year of Manufacture 2001 For sale is a Charmilles Roboform 35P wire EDM machine, manufactured in 2001. Gujdpfx Alsz Hb Dfe Deh The machine is in used condition, commensurate with its age, and is ideally suited for use in tool and mold making, as well as for general EDM applications. Machine Data - Manufacturer: Charmilles - Type: Roboform 35P - Year of Manufacture: 2001 - Machine Type: Wire EDM - Condition: Used - Operation: CNC control with handheld operating device - Work table: 500 x 400 mm - Dimensions (H x L x W): 2400 x 1900 x 1690 mm - Tool changer - Extinguishing system TECHNICAL DETAILS Travel (X, Y, Z): 350, 250, 300 mm Max. manual feed rate: 900 mm/min Electrode weight: max. 20 kg Workpiece weight: max. 40 kg Magazine configuration: 54/8 Electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Workpiece dimensions: (4x) 320 x 320 x 270 mm, (4x) 320 x 320 x 170 mm The machine can be seen in its entirety in the photos. Please refer to the pictures for the optical condition and equipment.

Condition: excellent (used), Year of construction: 2001, operating hours: 27,265 h, functionality: fully functional, Charmilles Roboform 35 with QCRI robot Year of manufacture: 2001 Gujdeyh E A Nopfx Al Deh Operating hours: 27,265 X, Y, Z travel: 355 x 255 x 305 mm C-axis with Erowa chuck Erowa chuck on the table Erowa probe Magnet 3 x aluminium Erowa pallets 320 x 320 mm 35 x electrode holders 50 x 50 mm QCRI robot 4 x pallet positions on the table 54 x electrode holder locations Documentation and diskettes Machine powered up for inspection

Condition: used, Year of construction: 1994, functionality: fully functional, Equipment: documentation/manual, Charmilles Technology Erosion Machines Erowa System Gusdpfx Ajz Haz Ajl Doh Type: Roboform 200 Year: 1994

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 350 mm, number of axes: 3, This 3-axis CHARMILLES Roboform 35 was manufactured in 2004. It features an X travel of 350 mm, Y travel of 250 mm, and Z travel of 300 mm. The machine has a table size of 500 × 400 mm and can accommodate workpieces weighing up to 500 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 35 machine we have for sale. Contact us for further details. Gujdpfozzxq Usx Al Deh • X travel 350 mm • Y travel 250 mm • Z travel 300 mm • Table size 500 × 400 mm • Work tank approx. 800 × 550 × 370 mm • Max. workpiece approx. 780–940 × 530–590 × 300 mm* • Max. workpiece weight 500 kg • Maximum machining current 64 A on standard 35/35P listings • Machine footprint approx. 1,900 × 1,690 mm • Overall height approx. 2,400 mm • Machine weight approx. 2,500 kg

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, Charmilles Roboform 350 Year of manufacture: 2007 C-frame sinker EDM machine Fixed table with lowering tank Travel (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (choice of one) Maximum electrode weight: 50 kg Without electrode changer Charmilles DPControl operating interface Operation via 12" LCD color touchscreen Keyboard and hand pendant also available Machine dimensions: 1900 x 1690 x 2522 mm Total weight: 2800 kg The machine will be cleaned and serviced by us upon receipt of order. Afterwards, an EDM test will be performed. We are happy to commission the machine at your site and provide operator training. Optional: - Transport - Cooling unit - Dielectric fluid Godpoyu N Sksfx Al Djuh - Clamping devices

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, workpiece weight (max.): 550 kg, total height: 2,790 mm, total width: 2,540 mm, total length: 1,910 mm, table width: 880 mm, type of input current: three-phase, table length: 560 mm, table height: 225 mm, workpiece length (max.): 880 mm, workpiece width (max.): 550 mm, workpiece height (max.): 225 mm, year of last overhaul: 2025, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance according to dealer prescrition performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Optionally floppy drives can be exchanged for USB drives. Tested and fully functional. Can be viewed and tested in working order. Immediately available! Gedpfx Alow Ad Ido Djuh

Condition: ready for operation (used), Year of construction: 1995, operating hours: 1,497 h, travel distance X-axis: 320 mm, overall weight: 3,450 kg, number of axes: 3, This 3-axis CHARMILLES Roboform 2000 was manufactured in 1995. It features a maximum workpiece dimension of 880 × 550 × 225 mm and operates with a maximum machining current of 64 A. With only 1,497 operating hours, this machine has been used primarily for training purposes. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 2000 CNC Die-Sinking EDM machine we have for sale. Contact us for further details. • Operating Hours: Only 1,497 h (used as a training machine) • Measuring Resolution: 0.5 µm • Machine Weight: 3,450 kg • Max. Workpiece Dimensions (L × W × H): 880 × 550 × 225 mm • Max. Machining Current: 64 A • Phases: 3 • Frequency: 50 Hz • Voltage: 380/400 V Gjdpfxszvplfo Al Deuh • Current: 16 A • Power: 5 kVA • CE Marking: Yes • With accesories as shown in the pictures

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, Charmilles Roboform 35 Year of manufacture: 2000 C-frame design Fixed table with lowering tank Travel distances: X=350 mm, Y=250 mm, Z=300 mm Gujdpfxsyyxbto Al Deh Max. workpiece size: X=780 mm, Y=400 mm, Z=300 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Distance table to chuck: 150 - 450 mm Working current 64 Ampere Isopulse generator Linear glass scales with 0.5 µm measuring resolution Includes pneumatic chuck Erowa ITS 50/3R Systems Machine weight (net): 2800 kg Machine dimensions (L x W x H): 1900 x 1690 x 2400 mm The machine was in operation with our customer until recently and is fully functional.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, table width: 320 mm, table length: 560 mm, TECHNICAL DETAILS X-axis travel: 320 mm Y-axis travel: 220 mm Z-axis travel: 320 mm Maximum workpiece dimensions: 880 mm x 550 mm x 225 mm Table dimensions: 560 mm x 320 mm MACHINE DETAILS Gjdpfxjya Efws Al Djuh Control: Charmilles Weight: 3,500 kg

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Gujdpfxepy Errs Al Deh

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 95428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 450 mm Table length: 750 mm Table width: 600 mm Maximum workpiece length: 1,200 mm Maximum workpiece width: 850 mm Maximum workpiece height: 400 mm Maximum workpiece weight on table: 1,600 kg Tool changer (number of tools): 24 Maximum electrode weight: 100 kg MACHINE DETAILS Connection: 50 Hz 3x 400 V Dimensions & weight Gedpfxeyhn Hgj Al Deuh Dimensions (L x W x H): 3,150 x 2,750 x 2,960 mm Machine weight: approx. 4,500 kg EQUIPMENT C-axis Tool holder system EROWA Fire suppression system Lamp

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine extensively overhauled worth EUR 18,000 Optional configuration QCRI 54/8: available, see pictures placement automation: available, see video Pressure flushing: 1 x through workpiece 1 x through electrode, 2 x lateral Suction flushing: 1 x through workpiece Central lubrication system automatically via NC in all axes TECHNICAL DETAILS Gedpfx Aljn Arnxj Douh Travel (X, Y, Z): 350, 250 300 mm Max man. Feeding speed: 900 mm/min Weight of electrodes: max. 20 kg Weight of workpieces: max. 40 kg Magazine configuration: 54/8 electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Plates: 8 pieces workpiece dimensions: (4x) 320 x320 x 270 mm, (4x) 320 x 320 x 170 mm work table: 500 x 400 mm T-slots: 3 x 12 mm distance of grooves: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm