Чайка АД

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2015101, Size 60 x 76 cm, die-cutting machine with automatic registration and camera system. Hedpjzxf Hdjfx Ahajt

Condition: used, Der Boxmaker Göpfert SRE Maxi macht alle Verarbeitungsschritte in einem: Rillen und Schneiden - längs und quer, Schlitzen und Stanzen. Wellpappenverarbeitung. The Göpfert SRE Maxi boxmaker performs all processing steps in a single operation: creasing and cutting—lengthwise and crosswise—slotting, and die-cutting. Corrugated Converting. Boxmaker Göpfert SRE-2 Maxi Mod. 250 - 2 (120) Compact Baujahr / Year 1995 - Serial-No. 1536.95.03 Arbeitsbreite / Working width min. 360mm - max. 2.500mm Hsdozulpdspfx Ahajt Arbeitslänge / Working Length min. 800mm - max. 10.000mm Dicke des bearbeiteten Materials / Thickness Of Processed Material min. 2mm - max. 16mm Schlitztiefe / Slot Depth 0–1.000mm Produktionskapazität / Production Capacity 250–380 pieces/hour Geeignet für alle Arten von Wellpappe (ein-, zwei- und drei-wellig), Suitable For All Kinds Of Corrugated Board (Single, Double, Triple Wall) Stromanschluss / Power supply 25KW, 50A Druckluftanschluss / Compressed air Connection min. 8bar - max. 10bar  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Hsdpjzt Iduefx Ahajt Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Foundation exchange table (third-party product) Machine raised by 300 mm Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Condition very good! Bobst platen conditioning performed (die service) 5/26 Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Videos available upon request via WhatsApp! Direct sale to a production company preferred! No dealer options will be offered! A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Condition: used, Letter Press Tiegel in good condition - DIE Cutter Heidelberg OHT in einem guten Zustand. Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1953 - Serial-No. 43717 Hedpfeztzp Rox Ahaet Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), functionality: fully functional, Bobst SP1420ER, ref. 3022 Year of manufacture: 1976 Maximum cutting force: 600 tons Hodpfxszrp Tns Ahajt Maximum sheet size: 1020 x 1420 mm Minimum sheet size: 500 x 700 mm Materials: from 250 g cardboard to 5-ply EB corrugated board Modernized sheet tracking system – PLC controller. Inspection camera above the cleaning section. Blanking unit – not in use. Maximum speed: 4,000 sheets/hour.

Year of construction: 2003, operating hours: 50,000 h, condition: excellent (used), functionality: fully functional, Item for sale: Bobst Sprintera 106-PER. Fully documented! Copies of invoices for service and overhauls are all available! Completely overhauled power register! Linear drives new Inverters new Complete pallet transport/machine logistics system new Bobst Sprintera 106-PER Year of manufacture: 2003 Max. format: 760 x 1060 mm Min. format: 400 x 350 mm Max. speed: 12,000 sheets/hour Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop delivery Quick-locking system Pricing according to customer requirements. Please do not hesitate to contact us if you have any further questions. Hodpfxozp Hcuj Ahaet

Year of construction: 1975, condition: ready for operation (used), An automatic Wupa flatbed die-cutting and creasing machine (auto platen) is available. Material weight range: 100-1000g/m², min. sheet size X/Y: 420mm/600mm, max. sheet size X/Y: 800mm/1120mm, max. die-cutting size X/Y: 780mm/1100mm, max. die-cutting force: 240t, max. production speed: approx. 3000sheets/h. An on-site inspection is possible. Hjdpfxsznx I Ho Ahaot

Year of construction: 2000, condition: good (used), BOBST SP 142-CER MATIC combines die-cutting, waste stripping, and automatic blank separation in a single production process. The machine includes useful tooling and preparation equipment and underwent various technical upgrades in 2014. Machine Summary Manufacturer: BOBST Hjdpjzmhgcefx Ahaet Model: SP 142-CER MATIC Machine type: Automatic flatbed die cutter with stripping and blanking Year of manufacture: 2000 Modernization: Various technical upgrades carried out in 2014 Delivery terms: FCA/Germany FGT visual condition rating: 7/10 The rating is based on the currently available photographs. Final technical evaluation remains subject to inspection and production testing. Why This Machine Is Interesting The BOBST SP 142-CER MATIC is a robust industrial die-cutting solution for large-format folding carton and packaging production. Its main advantage is the integration of three production processes within one machine: · Flatbed die-cutting · Automatic waste stripping · Automatic blank separation This configuration reduces manual handling and additional production steps. Finished blanks can be separated directly during the die-cutting process, resulting in higher productivity and more efficient downstream processing. The elevated machine design provides good accessibility to the individual production sections. The included preparation table and tooling racks support organized tool storage and faster job preparation. Technical Data Maximum sheet size: 1,020 × 1,420 mm Minimum sheet size: 500 × 700 mm Maximum production speed: 6,500 sheets/cycles per hour Machine Configuration · Automatic sheet feeder · Large-format flatbed die-cutting section · Automatic waste stripping station · Upper quick-lock stripping frame · Lower quick-lock stripping frame · Upper blanking and separation station · Automatic delivery section · Pneumatic delivery rake · Elevated machine configuration · Operator platforms and access stairs · Central machine control panel · Operator monitor · Individual operating panels at the production sections · Safety guards and safety systems · CE-marked machine · Various technical upgrades carried out in 2014 Included Accessories The following equipment is included: · Preparation table for lower tools · Two storage racks for die-cutting tools · Pneumatic delivery rake · Upper and lower quick-lock frames for the stripping station · Upper blanking and separation equipment · Additional equipment according to the available retrofit documentation Existing job-specific cutting, stripping, and blanking tools are included only where expressly confirmed in the final scope.

Condition: good (used), Year of construction: 1993, Bobst Domino 90 linear folding and gluing machine. Hjdpfezlapgsx Ahaot Output conveyor belt completely overhauled in 2024, with 3 independent pressing zones. Optional extras, at additional cost: Anti-skewing system + €5,000.00 Zator cold glue system, 3 nozzles + €3,000.00 Robatec hot glue system, 3 nozzles + €8,000.00 Handypack Vega system + €3,000.00

Condition: used, Stanztiegel in einem guten Zustand / Letter Press DIE Cutter in good Condition Stanztiegel / Letter Press DIE Cutter Heidelberg GTS Baujahr / Year 1965 - Serial-No. 62990 Hodpezh Nwrofx Ahaot Size min. 85 x 102mm - max. 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Stanzleistung / Punching Pressure 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation - 6 x frames for blanking dies Hjdpfx Aozg D I Nohaot - 6 x closing frames for die-cutting tools - 6 x tool carts

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate Hedpfx Ajy Rumyehajt - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: Hjdpjy Rummefx Ahast – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening Hjdpfx Aoy Rumajhaot – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel Hodpfx Ahey Rulveaet – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons Hodpjy Rulcsfx Ahajt

Year of construction: 2006, condition: used, We offer this used Unigraphica Unicut 740 and S-74-3 Unigraphica Unicut 740 cutting machine, manufactured in 2006. Type: S-74-3 Version: S-74-3 Number: 006 Year of manufacture: 2007 Fuse: 16 A Rated current: 5.0 A Power consumption: 3.0 kW Power supply: 3 x 400/230 V 50/60 Hz Formats: 7"-27" Hedpey N Rcbsfx Ahaot Format divisions: 1/6" and 1/8" Paper weight: 60-250 g/m2 Maximum paper width: 740 mm. GUK K72/4 KTL-F4 folding machine Year of manufacture: 1996. Equipment: 4 standard cassettes (pockets), 1 blanking cassette, 1 electric cassette for performing special folds, cassette stand. The machine is operational but incomplete. Missing the controller and optical sensor for triggering the electric cassette, missing the reciprocating knife section. Modified sheet feed control. The machine can be switched on and tested. If you have any questions or require additional information, please send us a message.

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Hjdpfx Aey Nnakjhajt

Year of construction: 1981, condition: excellent (used), We offer this machine in very good condition: Bobst SP 102E Autoplaten, manufactured in 1981. Manufacturer: Bobst/Switzerland Model: SP 102E Autoplaten Year of Manufacture: 1981 Hsdpey H Dl Djfx Ahaot Condition: Very good equipped with a stripping section, still in production, available from August 2026 The machine is still in production. Test runs are available. It is the main die-cutting machine in our print shop and is equipped with a stripping section. Available from August 2026. No intermediaries – directly from a Polish printing house!!! Price: 50,000 EUR EXW Negotiable.

Year of construction: 1990, operating hours: 21,834 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 059700605, Bobst SP 142-CER from 1990 for sale – Reason for sale: replacement investment made. The machine can be inspected in production. Dismantling and transport at buyer's expense. Hedpfsy Htxgex Ahaet

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Upwards: 47.8 mm/s Downwards: 93.7 mm/s Hjdpsy Ampdjfx Ahast Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

Condition: used, Year of construction: 1985, used die-cutting press, year of manufacture 1985, size 82x112, equipped with pneumatic clutch Hsdpfx Ajyx Hpvehaot

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Hjdpfjyxq Ucjx Ahajt

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld Hjdpfx Asyuw S Eshaot

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame Hjdpfx Ahoyuuzdjajt • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm