Punching machine

KAMA ProCut 76

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gkedjxzvamopfx Akhed Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms Gkedpfx Ajzlqzgjkhed - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Gjdpfx Aeziaqfokhekd

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Godpfxjy Nnako Akhjkd

Condition: used, Year of construction: 1998, Offset 2 color Godoywv Ewjpfx Akhekd Shinohara 66-2 Year: 1998 Number of impressions (mio): 79 Machine control - Shinohara console Printing units - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change - Cooling system - Dampening system: Shinohara Delivery - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Gkodpfxot H Nhhj Akhjd Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, STC-Ref: G-022-7647 Heidelberg OHT A4, Hot Foil Stamping, Year: 1974 format: 260x380 mm, 1 colors Gsdoz Ay Udopfx Akhokd equipped: - foil stamping and embossing - hot foil stamping device (embossing) - grey model - heating plate --> available: 11/2026

Condition: excellent (used), Year of construction: 2014, Counter: 71 Mil. clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Godpfszavhcjx Akhokd Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight* Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm

Condition: used, Year of construction: 2015, functionality: fully functional, Heidelberg SBD | 64x90cm ・Fully Refurbished 2015 ・Very Good Used CMI Cylinder ・2 Foil Rewind ・4 Zone Heated Aluminium Drop-In Plate ・Automatic Impression ・Touchpad Operation System ・Excellent Used Machine *Very clean, well maintained and serviced* Godeyzgl Ajpfx Akhokd LOCATED IN THE UK | AVAILABLE IMMEDIATELY

Condition: like new (used), Year of construction: 2008, Suprasetter A75, 4up Manufactured: 11/2008 2 laser heads, GEN II 2400 dpi, up to 22 plates/hour Bacher Punch Min plate size: 240 x 240 mm Max plate size: 676 x 760 mm Gkodeyw N Tbopfx Akhed With Prinect 7.51 Installed on DELL PC With Stacker Advant 36 Also available with SCL