Slavisa Duric

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Nedpfsy U Nqbox Ap Dewg

Condition: ready for operation (used), Punching capacity steel: 25x16mm, material strength: 45/60/80kg/mm² depending on hole diameter, angle steel 90°: 110x10mm, angle steel 45°: 90x9mm, T-steel 90°: 110x10mm, T-steel 45°: 90x9mm, U and I profiles: up to NP/IPE 18, round steel diameter: 42mm, square steel: 38x38mm, max. sheet thickness for notching: 12mm, notching width: 50mm. An on-site inspection is possible. Nwodpfxsy Uyc Ie Ap Deg

Condition: ready for operation (used), Year of construction: 1992, Immediately available due to business closure: CNC press brake Lotze Model 327 x 1500 kN Year of manufacture: 1992 Cybelec DNC 70 control Press force: 150 t Nwsdpfey Ugy Tex Ap Djg Working length: 3500 mm CNC-controlled backgauge Throat depth: 300 mm Stroke: 300 mm Drive: 15 kW Complete set of top and bottom tools (prisms) Weight: 12 t Price: EUR 6,500 plus VAT ex location

Year of construction: 2013, condition: ready for operation (used), total width: 6,000 mm, total height: 8,500 mm, product length (max.): 5,300 mm, table load: 3,000 kg, DimaSimma EMS-30 TWIN was manufactured in 2013. It features a maximum lifting weight of 3,350 kg and a vertical movement speed ranging from 3 to 10 m/min. The system includes two towers with racks for 80 containers, each with a maximum load capacity of 3,000 kg. If you are looking to get high-quality material handling capabilities, consider the DimaSimma EMS-30 TWIN machine we have for sale. Contact us for further details. • Performance • Max. lifting weight: 3 350 kg • Vertical movement speed: 3–10 m/min • Horizontal movement speed: 3–10 m/min • Electrical supply: 220–400 V / 3F / 50 Hz Nwsdpfey T N Eijx Ap Dsg • Max. power consumption: 30 kW • Containers • Quantity: 80 pieces (on 2 towers) • Usable dimensions: 4 250 × 720 × 250 mm • Design: closed sides, open bottom • Construction • 2 towers with racks (total of 80 containers) • A lifting unit (elevating unit) moves along the vertical axis in each tower • Lifting gearbox located at the bottom • Material movement • Vertical movement: up and down • Horizontal movement: container extraction/insertion • Work stations • 1 loading and 1 unloading station, opposite each other Additional equipment • WMS software: Elephant Manager (product identification, inventory and minimum stock management, order-based issue control, material entry date tracking) • PC control: 2 computers for operation

Year of construction: 2026, operating hours: 22 h, condition: used, machine/vehicle number: 6500040884, Laser cutting head with autofocus, BODOR Genius, laser power (kW): 12, control system BODOR Thinker 3.0, ergonomic remote control BODOR Mango, extraction system, water cooler, dimensions (W x H x L): approx. 324 x 240 x 1100, weight (kg): approx. 8100, max. sheet thickness carbon steel/stainless steel (mm): 35, max. sheet thickness aluminum (mm): 25, max. sheet thickness brass (mm): 16, assembly in 2024. Nwsdpfsy T Nzqsx Ap Dsg

Year of construction: 2016, operating hours: 17,607 h, condition: used, machine/vehicle number: 7975, Control system: HEIDENHAIN TNC640, travel range X/Y/Z: 10,000 x 1,300 x 2,200 mm, swiveling head: 2.5°, tool holder: SK50, 60 tool positions, chip conveyor: AXA FSB 300/TLG.63, serial number: 173492-2, year of manufacture: 2016, filter system: JUMA+GAIN, serial number: 8276, capacity: 100 l/min, year of manufacture: 2016, including 2 90° stands. Nwedpfx Apjy T Nyas Djg

Year of construction: 2024, operating hours: 305 h, condition: used, machine/vehicle number: 2805.24, Manual Plus 620 control system, turning diameter: 200 mm, distance between centers: 900 mm. Nodsy T Nymepfx Ap Dewg

Year of construction: 2010, condition: used, machine/vehicle number: B0605A0061, Control system: TRUMPF CNC, X-axis: approx. 500 cm, pressing force: 400 t, working length: 5,050 mm, weight: 34,000 kg. Nedoy T Nytjpfx Ap Djwg

Condition: used, Year of construction: 2008, machine/vehicle number: B0505A0232, operating hours: 22,320 h, (Hydraulic system activated), manufacturing number: F1028-F, pressing force: max. 170 t, stroke: max. 445 mm, operating pressure: max. 300 bar, weight: 12,200 kg, control system: TRUMPF CNC, X-axis: 3,000 mm, angle sensor. Nsdpjy T Nyyjfx Ap Dowg

Year of construction: 2009, operating hours: 14,793 h, condition: used, machine/vehicle number: 93.437.292, WEBER control system, X-axis: 1,350 mm, max. workpiece thickness: 90 mm, grinding dust extraction system PIONIER dust collector ZF-1 Eco, year of manufacture: 2008, serial no.: 081220, 7,000 m³/h, weight: 800 kg. Njdpoy T Ny Hofx Ap Dswg

Year of construction: 2013, operating hours: 19,392 h, condition: used, machine/vehicle number: 1683, (Beam in), TRUMPF CNC control, X-axis: 3,000 mm, Y-axis: 1,500 mm, laser power: 5 kW, loading and unloading table, chip/part conveyor. Nsdpfjy T Ny Tjx Ap Dewg

Year of construction: 2010, condition: ready for operation (used), A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible. Nedpfx Aey Tn N Hop Dswg

Year of construction: 2022, condition: ready for operation (used), sheet thickness (max.): 6 mm, working length: 2,000 mm, Plate rolling machine manufactured in 2022. This FACCIN 4HEL-2017 features a bending length of 2000 mm and a maximum bending capacity of 6 mm for mild steel. It is capable of handling plate thicknesses up to 6 mm without prebending at specific conditions. If you are looking to get high-quality bending capabilities, consider the FACCIN 4HEL-2017 machine we have for sale. Contact us for further details. Njdpfxoy Tlw Ie Ap Dowg • Bending length: 2000 mm • Max. bending capacity (mild steel): 6 mm • Max. plate thickness without prebending at D = 5× upper roll diameter (mild steel): 6 mm • Max. plate thickness without prebending at D = 1.3× upper roll diameter (mild steel): 4 mm • Max. plate thickness with prebending at D = 5× upper roll diameter (mild steel): 5 mm • Max. plate thickness with prebending at D = 1.3× upper roll diameter (mild steel): 4.5 mm

Year of construction: 2018, condition: ready for operation (used), cutting length (max.): 3,050 mm, sheet thickness (max.): 6 mm, Hydraulic shearing machine manufactured in 2018. This HACO TSX3006 MOT features a maximum cutting length of 3050 mm and a cutting thickness capacity of 6 mm for mild steel. It includes automatic blade gap and rake angle adjustments, along with a backgauge adjustment range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the HACO TSX3006 MOT machine we have for sale. Contact us for further details. - Control System: SC 100 T Touchscreen control- Voltage: 380V / 50 Hz- Capacity: 3000 / 6- Backgauge Adjustment Range: 1000 mm- Sheet Support Arms: 1x 1000 mm length- Blade Gap Adjustment: Automatic- Rake Angle Adjustment: Automatic- Cutting Line Illumination: Included- Safety Equipment: Type II Finger Guard with Moulden, CE Certified- Machine Paint Finish: Light Gray and Dark Gray (No Cyan Blue)- Current Status: Delivered WITHOUT OIL FILLING Nodjy Ti A Iopfx Ap Dswg

Year of construction: 1990, condition: ready for operation (used), A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement. Nedpfx Apjy Tat De Dewg

Condition: good (used), functionality: fully functional, Roll Mill 30 HP for Silver, Copper Nwsdpfx Apoy Sz Tvo Djg

Year of construction: 1971, condition: excellent (used), functionality: fully functional, Roll mill CARL WEZEL BW350 61 HP Under power Njdpfey Sz S Esx Ap Dowg

Year of construction: 2002, condition: ready for operation (used), Press force: 1800kN, stroke: 300mm, strip width: 80-400mm, max. coil weight: 3t, system operating pressure: 250bar, pump drive power: 15kW. An inspection on site is possible. Nwedpfjy Sncwsx Ap Deg

Year of construction: 1994, condition: ready for operation (used), A Durmazlar guillotine shear distributed through Knuth is available. Working width: 3020mm, max. sheet thickness: 8mm, motor power: 18.5kW, stroke: 140mm, stroke rate: 14/min, max. pressure capacity: 210bar, oil tank capacity: 250l. Machine dimensions X/Y/Z: approx. 2650mm/3400mm/2300mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Nodpfxsy R Drfe Ap Dewg

Condition: used, Year of construction: 2001, OMERA DIAMETER: 1200 mm Nedpfx Apoy Rx Eys Dswg

Year of construction: 2001, condition: used, OMERA MAXIMUM DIAMETER: 1000 mm Nsdpfx Apey Rx D As Djwg

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,500 kg, total width: 750 mm, total height: 1,320 mm, pressing force: 2 t, product length (max.): 5,400 mm, number of axes: 3, This 3-axis WAFIOS BER-35 tube bending machine was manufactured in 2008. It is CE marked and has completed safety-technical approval, ensuring compliance with safety standards. If you are looking to get high-quality tube bending capabilities, consider the WAFIOS BER-35 machine we have for sale. Contact us for further details. • tube bending machine • Control System: Schleicher XCN 540 CNC • Bending Capacity (Steel/Stainless/Non-ferrous): Diameter 3 to 35 x 3 mm (at R=2xD) • Max Bending Capacity (Tested): 38 x 2.5 mm (at R=2.5xD) • Solid Material Capacity: St.35 up to D=20 mm • Tube Feed Length: 3000 mm • Bending Angle: 1° to 190° • Bending Radius (Max): 260 mm to tube center • Bending Radius (Min): 3 mm to tube center • Bending Speed: 1° to 90°/s (programmable) • Return Speed: 90°/s (constant) • Feed Speed: 1500 mm/s • Slide Stroke: Max 100 mm • Clamping Stroke: Max 100 mm • Mandrel Retraction Force: 30 kN • Counter-holder Force: 25 kN • Clamping Force: 45 kN (adjustable) Nwodpey Nk A Iefx Ap Deg • Operating Voltage: 400 V • Nominal Current: 35 A • Air Requirement: 36 l/min at 6 bar • Additional Equipment: Mandrel unit (servo-driven), Laser scanner safety system (CE), Slide rail (axis controlled), Adapter set for Pulzer tools • Compliance: CE marked • Safety inspection: Safety-technical approval completed

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption Nodpfey Nd Hyjx Ap Djwg • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Year of construction: 2021, condition: ready for operation (used), overall weight: 4,920 kg, total width: 1,460 mm, total height: 1,520 mm, product length (max.): 2,925 mm, Roll bending machine manufactured in 2021. This MG MG4R1520C features a working width of 1,550 mm and a bending capacity of 20.0 mm. It includes a CNC TouchCommand EVO control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MG MG4R1520C machine we have for sale. Contact us for further details. • working width: 1,550 mm Nwjdpfx Aoy Ifrzjp Deg • Bending / pre-bending capacity: 20.0 / 16.0 mm • Top roll diameter: 270 mm • Bottom roll diameter: 260 mm • Side roll diameter: 220 mm • Drive power (central hydraulics): 7.5 kW (15 A) • Control: CNC TouchCommand EVO • Electrical supply: 400 V, 50 Hz, 3Ph + PE Additional equipment • Crowning of rolls • Inductive hardened rolls • Calibration device • Cone bending device • Hydraulic brake for top roll • Additional roll (1,550 x 230 mm)

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 1,000 mm, total length: 3,400 mm, total width: 1,850 mm, overall weight: 1,000 kg, table length: 2,500 mm, table width: 1,000 mm, cutting speed: 10,000 mm/min, Reliable and fully operational universal cutting system. Year of manufacture: 2009, including the latest software generation and a comprehensive unrolling package. Immediately available from stock. Manufacturer: Schwartmanns Maschinenbau GmbH Model: EFM 26.1 Year of manufacture: 2009 Software: Latest software version (as of 2026) included Program scope: All available unrolling programs Nedsy Idmdopfx Ap Dewg Condition: Used, workshop-tested and fully functional The machine is located at our warehouse in 50389 Wesseling and can be viewed and demonstrated under power.