Used machine
Year of manufacture 1992
Condition: maintained
Drilling and press-in machine for all
Variants of furniture fittings
Hole line drilling machine in System 32
hole line drilling head with 7 spindles with patented
integral pin
4-spindle drilling head for Hettich hinge system
Quick change system
pneumatic drill stroke
availability: short term
Location: Hochheim
Ikvayxmic
Type: Prebomat II Year of construction: 1990 - Condition: function tested, very good, used - 3 fitting drills - pneumatic clamping and dipping - press-in die
Bvqhycgegt
Hardware drilling machine
Manufacturer: Ganner
S7c3lx
Type: 191
Year of construction: 1986
Power: 0,75 kw
used, good condition
manufactured by Ayen
type SAE 1
built in 1984
mach.-No. 842218
number of spindles 1 piece / sprocket chuck
workpiece clamping device 1 downholder
drilling feed pneumatic
underframe
foot-operated
drill chuck sprocket chuck
required space ca. l x w x h mm
2000 x 800 x 1800
weight ca. 110 kg
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
Cim9oioo
Bushing drilling machine, row drilling machine
-Support table: 2200 mm
-mobile
-Stops: adjustable
Bzsjwxz
-Dimensions: 2300/600/H1350 mm
-Weight: 240 kg
Number of drilling agregates 3 Stk.
Automatic Fitting-press in nein ja/nein
Itqkvodaw
Pot volume drill ja ja/nein
In-line and fitting drilling machineSecond hand machineBuilt: 1984Condition: Function testedTechnical data:Fully automatic pneumatic control with foot valveDrilling unit 1,1 kWSpeed 2800 rpmDrilling stroke 0 -55 mmDrilling ruler crosswise adjustable from 0 - 140 mmWorking height 850 mmPlace required without extension rail 1000 x 750 mmCompressed air connection 6 barWeight approx. 70 kgIncl. various stops, drill heads and drillsLocation: RöllbachAvailability: Immediately
Blxjhcfmln
Fitting drilling machine MSP
Minipress
year of manufacture 1988
0,75 kw
380 volt
Bv8729p73c
Drilling pattern Euro
Pneumatic clamping cylinder
stop linear
Number of boring motors 2 St.
Cfbwylxw
boring of corner bearing 1=yes, 0=no 1 ja
boring of olive 1=yes, 0=no 1 ja
cleaned, function checked, test run
Drill stop cleaned and lubricated
partly new Pneutmatics hoses laid
used
manufactured by Grass
type BBM/G
built in 1992
Masch.-No. 9203538
Ld0ntu28
Horizontal drilling head
1. 3 spindles
2. 6 spindles / special drill head
Vertikalbohrkopf 1 piece - 19 spindles
drill head tiltable
grid 32 mm
with press matrix 1 piece
drilling feed pneumatic
drilling unit
underframe
foot-operated
required space ca. l x w x h mm
1000 x 1300 x 1600
weight ca. 240 kg
located in 97...
Multi-spindle head, multi-spindle drill head, dowel drill head, fitting drill head
Qlaywhztj
-Dimensions: 190/85/75 mm
-Bore distance: 26 mm
-Middle drill: 5 mm offset
-Number: 2x drill heads available
-Price: per piece
-Weight: 2 kg/piece
Number of drilling agregates 4 Stk.
Automatic Fitting-press in nein ja/nein
Pot volume drill nein ja/nein
Fb7i29dj
function tested
incl. drill head for line drilling, 11 drills
Bwwi9ndrw8
Fitting drilling machine BBM/ST
13 spindle b
Year of manufacture 1987
Stop
Bvvx2mprzq
Extendable up to 3 m.
With base cabinet and many accessories
380 Volt
Number of boring motors 1 St.
boring of corner bearing 1=yes, 0=no 1
boring of olive 1=yes, 0=no 0
Btts9jt3so
cleaned, function tested, test run
Iwgsx9n
used, good condition
manufactured by Grass
type BBM-R
built in 1991
Masch.-No. 9106063
Vertical drill head
1. fitting
2. fitting
3. fitting
Turret for selecting the drill head
hole line drill head with locking pins
mechanical
number of spindles in a row 5 piece
with press matrix 1 piece
desk model
guide fences 4 piece 1000 mm
pendulum fence 10 piece
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen
Lautenschläger type Meplamat 4000
Drilling and press-in machine
Machine
Maschn.-No. 562, Y.O.M.
SKUW_G190614
Description
Hole row 8 spindles
Pitch 32 mm
Hinge pot 48 / 9 mm
Connection fitting 32 mm
Power 400 / 50 Hz 1.5 kW
Speed 2800 rpm
Holder 2
Compressed air 6 bar
Extraction 50 mm
Qhoviexa
Weight approx. 85 kg
Installation dimension (BTH) 3.00 x 1.07 x 0.74 m
State / work performed
• Machine cleaned
• Machine functionally tested
• Age-appropriate and usage-related signs of use
• Availab...
Motor output 0,75 kW
Overall size 850x420 mm
Weight 75 kg
Number of boring spindles 3+7 St.
Bmaugqipcu
boring and inserting machine for hinge type QUADRIO RQ6
second hand machine
volt. 380/50
Su3zoo
DRILLING MACHINES - INSERTSAutomatic boring machine
Ddnop8f
Ganner drilling machine RED Baron as good as new for sale
complete in standard version
Drilling unit with pneumatic feed and pneumatic brake,
Engine 1,1 kW
4-spindle drilling head Blum pitch 45/9.5/32 mm
Fk3xyx7
Press-in bracket with press-in die
Extension ruler 1,25 m
Extension ruler from 1.25 to 2.5 m
Swivel stops with clamping lever
sales order sale
used, cleaned, test run,
manufactured by Scheer
type DB 37
built in 1984
mach.-No. 83175
horizontal drilling head 1 piece
number of spindles 4 piece
drilling feed pneumatic
underframe
foot-operated
Ok7ex
total connected power 2.2 kW
located in 97447 Gerolzhofen
sale in current condition
- free on truck -
The machine is designed for drilling blind holes in two planes (bottom and front of the workpiece). It has three axes, one of which is controlled by the CNC (X axis), the Y and Z axes are set using manual drives. There are three units. The horizontal drilling unit has two spindles with a center distance of 32 mm and separate
Pvnsrq
Sell as good as new fitting drilling machine with horizontal drilling gear (5 spindles), incl. full equipment.
3 drilling gears - 1x hole line with 9 spindles, 1x cup band drilling gear and 1x fitting drilling gear,
additional hold-downs, various stops,
drill bits in different sizes, quick-change chuck,
stop support, raster bar, cam bar
H8sq0zwzg
machine has been used exclusively in a 1-man-operation, is like new - can be demonstrated at any time
CNC drilling - milling machine type BF2 / BD
for the insertion of hardware millings and dowel holes on window and front door components.
Space requirement: approx. 8500x1800mm (3800mm in the area of the cross table for coping wood)
X-axis: 5250mm
Y-axis: infinitely variable via screen
Z-axis 180mm
X axis: 25 m/min
Machining mass max:
Hz039u9ko
-longitudinal wood: 4550x180mm (LXB)
-head wood: 200x180mm (WxH)
Longitudinal wood processing: 6 pcs. clamping cylinder
Head wood processing: 6 pcs. clamp...
DRILLERS - INSERTS Automatic drilling machine
Bwq2yfvorw
Base plate gear- 3 spindle
table dimension W-730mm D-450mm
Adjustment travel in depth 170mm
Material thickness 15-40mm at 13mm drilling depth
Max. Drill length 20mm
Shank diameter of the drills 10mm
Compressed air 6 bar
Press-in force at 6 bar pressure approx. 280 kg
Si8rcaze9
Motor power 1,1kW
weight 125 kg
Complete with base cabinet and stops
2 different fitting heads Grass and Hettich
Good condition
Location: Ex stock 54634 Bitburg
drilling for pot hinge drilling
Ttzfxxlmd
with side holes
Set of 2 machines. Specifications: - Dimensions (L x W x H): 5000x2000x1950 mm; - number of axles: 3; - number of spindles: 29 pcs. Productivity (in three parts of the chest of drawers): top drilling with three units (a total of 29 spindles): cover 4 stroke 180 pcs / hour; - bottom shelf double-sided drilling 8 cycles 60 pcs / hour; - side wall 13 steps 70 children / hour.
Ewcpwpx
Hinge band boring machine Hettich
type: Hettich Profi
Nm7yd
year of manufacture: 198
drilling head 3 drills
and 5 drills
drilling and inserting
machine in good working condition
NUMBER OF SPINDLES 21
CENTRE TO CENTRE DISTANCE BETWEEN SPINDLES MM. 32
MAX BORING AXLES SPACING MM. 640
BORING DEPTH MM. 65
NUMBER OF DOWELLING GROUPS 6
DOWELS LENGHT MM. 25-50
HORIZONTAL INJECTORS 6
SPINDLE ROTATION SPEED RPM 4000
WORKING AIR PRESSURE BAR 7
Ioqhazav
FOOTPRINT MM. 1500 X 1140 X 2200H
WEIGHT KG. 700
PRODUCTION LINESBoring and Insertion Line
B0iaqko8
UniPress grass for pot hinge drilling and injection is in good condition
Weight 95 kg
Year of manufacture approx. 1993
Attacks left and right
88gx07b2c
Mobile base operating instructions the machine is in good condition, ready to use.
Location: 54634 Bitburg's stock changes, errors, prior sale reserved.
S + S fitting drilling machine BS for efficient drilling of corner bearings in very good condition
Motor: 0.75 kW 380V
Pdgop
Very fine adjustment of the drilling speed
Max. Frame thickness: 100 mm
Dimensions: 2950 x 650 x 1100 mm
With pneumatic scanning
If necessary, a video of the running machine can be sent.
4-spindle drilling head with press-in clamp
motor 0,75 KW
1 stop ruler 900mm
2 swivel stops
1 cup band drill 35mm
2 dowel drill 8mm
Bpvlldzf9w
Beschlagbohrmaschine RUCHSER RU-BES
Bj. 1995
2 Spindeln mit Werkzeug bestueckt
Wkazj7kd0
Bohrkopf fuer Beschlagsystem GU Jet
3 Fusspedale: Unten-Rueckstellung-Bohren
pneumatische Spann- und Anschlag Vorrichtung
Maschine fahrbar auf Rollen
Gebrauchte Maschinen und Anlagen ohne weitere Gewaehrleistung.
Drilling units vertical 5
Number of aggregates 1
Fitting drilling unit
Main motor kW 0.75
Press in fittings
Drill feed pneumatic
Workpiece clamping pneumatic
With table, with additional drilling unit Drilling unit
Brlopvzcqo
380 V
PRODUCTION LINES - Drilling and Insertion Line
Jb3hb2vx0
Machine fitting drill manufacturer Ganner / Würth
Type BASICA / Prebomat 193V
Share ID no. 1037085
Built in 2000
Iq2gvwepc
Beschlagbohrkopf 1 piece connection 400/50 Volt / Hz location: 54634 Bitburg's stock
-free load-
Hardware drill Blum
Cglmipwc
Grass cutter head
incl. length stop
Pneumatic drilling
Bpurokdiez
Motor 0,80 kW-400 V
1 extension ruler left 400-2400mm
1 extension ruler right 400-2400mm
6 adjustable stop cams
Operating instructions
1.05 Kw, 230 V, 50 Hz,
Bh92ldvw
2760 rpm,
6-fold drill chuck,
Drilling depth 13 mm,
Suction connection 50 mm,
Accessories: 1 drill 35 mm, 2 drills 10 mm, various tools,
CNC FULL Flexible LINE for Drilling and Inserting, for the Front doors (of furniture) process
With BECKHOFF Numerical Control (BLUESYS programming software + MDE).
Composed by:
Bdfd7dw8rc
A) WORKPIECES LOADING SYSTEM
B) FLEXIBLE DRILLING-INSERTING MACHINE Mod. BAT-RTW-CNC
With 4 working stations:
- Station No. 1: Workpieces (panels) in-feed and positioning
- Station No. 2: Drilling and routering
- Station No. 3: Inserting
- Station No. 4: Workpieces (panels) release and out-feed
C) WORKPI...
Furniture doors and drawer fronts CNC machining center.
Throughfeed machine for drilling, drilling & insertion of hardware, grooving and routing.
Hgo0si7h0
Short introduction:
• CNC controlled front processing center
• Complete processing of furniture doors and drawer fronts
• Workpiece length and width control system
Fitting drill Blum Minipress M51.1000
year of manufacture 1985
Manufacturer Julius Blum Austria
Motor 0,75 Kw
pneumatic drill feed
Npz0v
for drilling and pressing in of cup hinges.
Press in fittings
Fitting drill unit
incl. stop rulers
400 V / 50 Hz
Weight 37 Kg
CNC FLEXIBLE DRILLING LINE with automatic handling equipment.
Composed of the following machines:
Bbq0gylpbc
V03035) LOADER "TOMASSINI" Mod. Rapid with motorized rollers table.
V03036) TRANSFER at 90° "TOMASSINI" (Connecting Rollers Table with 90° conveyoring belts)
V03037) Gantry CNC-FLEXIBLE through-feed DRILLING MACHINE "MORBIDELLI" Author 660
It can simultaneously process 2 panels together (Max workpieces lenght-depth: mm 600 each)
V03038) BRUSHING Machine "SIRIO" for the panels cle...
CNC bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic CNC controlled drilling and insertion machines.
0xsaq2tz
Short introduction:
• CNC controlled hinge boring and inserter for high capacity
• Flexibility through the CNC control
• Massive and robust drilling units
• Inserting die made of steel for a long life time use
• Solid wood drilling with standard 1...
Bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic drilling and insertion machines.
Short introduction:
• Single an