Anngel Stoilov 96 Jsc

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 381-30-09/21, Dedicated cutting line for aluminum profiles. 4-axis line for 90° cutting of short aluminum profiles. Profile dimensions: 130 x 40 mm. Cutting length: 30-400 mm. Cutting tolerance: +/- 0.2 mm. Maximum length of input material: 6500 mm. Rcedpfx Ajy U Ncqedijb

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm Redpfx Aoy Ruvbodiocb capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm 110 mm 95 mm 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 381-30-09/21, Dedicated line for cutting aluminum profiles and drilling threaded holes. 3-axis line for 90° cutting of short aluminum profiles. Profile dimensions: 30 x 15 mm. Cutting length: 14 mm. Cutting tolerance: +/- 0.2 mm. Maximum length of input material: 6500 mm. Rjdpfxjy Nxh So Adiecb

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation Rcjdpfx Asy E Uk Isdisb • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Rcsdpfx Asy Dcmbjdijb Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Year of construction: 1990, functionality: unexamined, total length: 1,050 mm, total height: 2,000 mm, total width: 1,800 mm, overall weight: 550 kg, space requirement height: 2,000 mm, space requirement length: 1,050 mm, space requirement width: 1,800 mm, -KOM 3178- Here, we offer a fully automatic metal saw from the manufacturer MEP. The saw is in good optical condition. In addition to the automated operation, the saw can also be operated manually. The maximum clamping width of the workpiece is approximately 150 mm. The recommended saw blade diameter varies, depending on the profile, between 315 and 350 mm. Manufacturer: MEP Type: Tiger 350 AX Total weight: approx. 550 kg Space requirements: Width: approx. 1800 mm Rodpfx Aoyykivodijcb Height: approx. 2000 mm Depth: approx. 1050 mm

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable, 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting capacity at 90 degrees with blade size 360 mm: Rcodpfxjyu Hy Sj Adiob round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades --> --> Special price: EUR 4,150 net, loaded free of charge!

Condition: new, Year of construction: 2026, saw blade diameter: 285 mm, cutting height (max.): 80 mm, cutting range round steel at 90°: 80 mm, saw blade speed: 200 rpm, cutting range square steel at 90°: 50 mm, cutting diameter: 80 mm, rotational speed (min.): 200 rpm, rotational speed (max.): 200 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-80 Circular sawing machines are industrial cutting devices used for high-precision and rapid cutting of pipes, profiles, and solid metal materials. They are particularly favored in mass production lines to achieve fast, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency through their robust mechanical structure and advanced automation system. Thanks to the PLC-controlled automation system and touch operator panel, cutting parameters can be easily configured, enabling high-precision batch cutting operations. Featuring a spheroidal cast iron machine body, a powerful transmission system, and servo feed technology, the machine operates vibration-free and prolongs tool life. CHK Series machines are engineered for the rapid and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular saw cutting technology • Servo-driven feed system • PLC-controlled automation system • Superior cutting precision and stability • Heavy-duty industrial machine construction Rcjdpfx Aeyq N Hmjdisb Typical Applications • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and sub-industry sectors Standard Features • Precision cutting and smooth surface quality • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vice pressure system • Servo-driven feed system • Automatic loading system • Pallet conveyor system • Electromagnetic braking system • Scrap separation system • Diameter control system • Hydraulic motor-driven chip removal brush • Air pressure control system • Easy operation with PLC control unit • Torque control system that extends blade life • Easy adjustment of vice pressure based on material type Technical Specifications – CHK-80 Cutting Capacity (Round): Ø10 – 80 mm Cutting Capacity (Square): Max 50 × 50 mm Cutting Capacity (Rectangular): Max 70 × 50 mm Main Motor Power: 7.5 kW Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Circular Saw Blade Size: Ø285 × 1.7 × 2 mm Blade Speed Range: 20 – 200 rpm Single Feed Length: 750 mm Bundle Feed Length: 3,000 mm Remnant Length: 60 – 70 mm Machine Weight: 3,050 kg

Condition: new, capacity Ø 10 - 75 mm sawing motor 11 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Material Feeding Motor 1,5 KW Siemens Saw speed 70-160 rpm /min saw-blade dia. Ø285 x 2,0 x 1,7 x 32 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 2950x6800 m weight of the machine ca. 3500 kg GERD WOLFF GLS-75 High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Rsdpeymf Ifjfx Adijcb Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Rcodpfx Aoyilm Rjdieb Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: used, Saw BEHRINGER HBE321 A Dynamic Rcedpjx Tvkxofx Adiob

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0811759, • Cutting diameter (round tubes): 8 to 90 mm • Square tube profile capacity: 10 × 10 mm to 80 × 80 mm • Cut speed / feed speed: 50 to 300 m/min • Saw blade diameter: approx. 350 mm • Motor power (saw drive): approx. 5.5 kW • Clamping system: BEWO Prisma jaw system (four-point clamping, allows simultaneous clamping of multiple tubes) • Controller / automation: Siemens CNC / centralized Siemens controller; fully automatic setting adjustments based on entered tube parameters. Bebrtapexcwc Sszmowh Rcodpoxcwc Sjfx Adieb • Deburring: Often integrated (the machine is used together with a deburring unit/system) • Throughput: up to 8,000 pieces per hour in some configurations.

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard Rsdpfx Adexabzyeiocb - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 315 mm, IMET SIRIO 315 circular saw with 3 m roller conveyor on the loading side and 3 m electronic stop on the unloading side Rcedswzhnlopfx Adiob

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm Rodpfxjwvbk Ae Adijcb *

Condition: new, Year of construction: 2025, Schnittbereich rund: 20 - 100 mm Cutting area, square (W x H): 20 x 70 mm Shortest length of cut piece : 5 mm Shortest remaining piece length in automatic mode*: 65 mm Rcodpfx Adowaa Dvsijb Shortest remaining piece length in single cut: 30 mm Length: 2300 mm Width including chip conveyor: 2260 mm Height: 22100 mm Height of material support: 925 mm Weight of machine approx.: 3950 kg Electrical connected load: 26 kW Saw motor power: 18,5 kW Hydraulic motor power: 2,2 kW Cutting speed continuously adjustable: 30-160 rpm Feed speed of the saw: 0,3-30 mm / sec Automatic material feed length, single stroke: 800 mm Length of automatic material feed, multiple strokes: 9999 mm Saw blade diameter: 360 mm Saw blade bore: 40 mm Saw blade thickness: 2,25 mm

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm Rodpfx Adsv Nq Rtsijcb cutting diameter 10 - 140 mm cutting speed 25 - 160 m/min total power requirement 35 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm Rcsdpfx Adjv Nq Rmeiob cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor

Condition: new, Year of construction: 2025, saw blade diameter 370 x 3,0 x 40 mm Rjdpfsvuz Rnox Adiecb cutting diameter 120 mm stroke -- mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round li. 120 / re. 105 mm capacity 45 degrees: square li. 100 / re. 100 mm capacity 45 degrees: flat li. 130x100 / re . 130x10 mm capacity 60 degrees: round 110 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 90 x 100 mm total power requirement 1,8 / 2,2 kW weight of the machine ca. 392 kg dimensions of the machine ca. 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Rcodpjrz Rw Refx Adiob Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 volt 380 V Rcsdpfx Ajpxri Uodiob frequency 50 Hz weight of the machine ca. 500 t

Condition: new, Year of construction: 2026, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). Rodpfema Dfaex Adiecb • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. Rodpfx Ajma Dd Ijdiscb • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Rcodjma Ddvjpfx Adisb Model: S200 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). Rjdpfjma Ddrex Adiocb • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 4.5 m Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.