Used Finishing Line Flooring for sale (25,095)

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via Gusdpfxsv I Akvj Ag Njh handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. This Turbo-Line machine includes a Gsdpfovvu Snsx Ag Neuh 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen.

Condition: like new (used), Year of construction: 2002, functionality: fully functional, UV finishing line ESC Progress 350 Gjdpfxjw H Rrds Ag Nsuh As-new cylinder screen printing machine for small formats 38x53 cm, equipped with Mirus single sheet feeder, pneumatic squeegee system and screen frame mounting, UV dryer with two lamps of 120 W/cm each, and Mirus stacker. Inspection and demonstration available at short notice by appointment.

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) Gujdpfxohbyr Ss Ag Nsh i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Used (only used for testing purposes) PERS vibratory finishing machine (image similar) Gentle deburring of small parts, laser-cut and stamped parts, formed, turned, and milled parts. Suitable for all materials! Fully manually operated stand-alone unit. Low investment! Guodpfx Aehr Rkiog Neh Technical specifications: Year of manufacture: 12/2020 Capacity: 120 l Ball diameter: 640 mm Dimensions (LxWxH): 1,740 x 900 x 1,470 Power: 4 kW Voltage: 400 V AC / 3 phases Frequency: 50 Hz Weight: approx. 500 kg Speed: 50-160 RPM PU coating: 26 mm

Year of construction: 1998, condition: excellent (used), functionality: fully functional, We sell a complete finishing line. The line consists of: 1. intermediate grinding machine (Tecnolegno, year of construction 1998) 2. Painting chamber (GreenSprayer, 4X Wagner GA250Al sprayer, Cooling with Mitsubishi air conditioner, 2X High pressure paint pump Böllhoff 000.185-DO) 3. Drying chamber (with central heating system) Wood-aluminum window sashes were processed with this line. The line used water-based paints. Device is in good condition. The price of the device is to be offered by the buyer. Buyer is responsible for transportation and dismantling. If you have any further questions, please contact us about the production equipmen Guedpfxeu Hgave Ag Neh

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241202, total height: 860 mm, overall weight: 320 kg, total length: 1,170 mm, total width: 1,170 mm, type of input current: three-phase, tank capacity: 150 l, usable tank capacity: 100 l, input voltage: 400 V, workpiece width (max.): 170 mm, workpiece height (max.): 170 mm, outer diameter: 170 mm, workpiece length (max.): 170 mm, inner dimension width: 260 mm, power: 2.2 kW (2.99 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 60 kg, Equipment: rotational speed infinitely variable, The round vibrator Vibra-Line DK impresses with an open, curved container, which has a capacity of 150 liters. This model is equipped with an air-controlled automatic emptying system and a a sound-insulated lid, which ensures convenient and quiet operation. The U-shaped inner container has a 22 mm thick polyurethane (PU) coating, which ensures exceptional resistance to process wear. The capacity of 150 liters allows for approximately 50 to 100 liters of metal parts per load, depending on their shape and size. Gusdpfsviu Ehex Ag Neh The wide drum and low discharge height make it much easier to unload the processed parts. The machine is controlled by a frequency converter with infinitely variable speed control, which is operated via a 5.5-inch touchscreen. Process times, languages and speeds can be adjusted quickly and easily. and speeds can be adjusted quickly and easily. The control system also controls two external connections, which can be used for process water and compound dosing. The Vibra-Line 150DK circular vibrator is supplied as a plug-and-play solution and only requires a 16 amp CEE plug, 4 bar compressed air and a water connection for commissioning. a water connection for commissioning. Our devices comply with the EC machine/device directives and are supplied with manufacturer's declaration of conformity and CE mark.

Condition: excellent (used), Roller PAINTING and FINISHING LINE (UV), max. working width mm 1300. Composed by: 01) cod. J05012) Sanding Machine "COSTA LEVIGATRICI" Mod. SN TR LFT 3 TT 1350 02) code Y11034) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 03) cod. Y11036) UV oven (1 lamp) "CEFLA" Mod. UV 2000 M1 - TT 2000 04) code Y11037) Roller Coater"SORBINI by CEFLA" Mod. SMARTCOATER M-1 AN 05) cod. Y11041) UV oven (2 lamps) "CEFLA" Mod. UV-R M20 06) code Y11061) Sanding Machine "COSTA LEVIGATRICI" Mod. SH3 TR TTTTR 1350 07) code Y11042) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 08) code Y11039) UV oven (2 lamps) "CEFLA" Mod. UV-R M2 09) code Y11035) Roller Coater "BURKLE" Mod. RCL-M 1300 (e.a.s.y. Coater) Gsdpohyty Aofx Ag Nsuh 10) code Y11043) UV oven (3 lamps) "CEFLA" Mod. UV-R M3

Condition: like new (used), functionality: fully functional, Very nice booklet maker for sale. Horizon Stitchliner type 5500 with 2 x Vac 60 towers. Three-knife trimmer HTS 30. Saddle stitcher SPF-30. Accumulator folder ACF-30. Gedpfx Agowtyf To Njuh Stacker ST-40. Year 2009. This machine is 100% functional. All 16 stations are working (see video). Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location: the Netherlands). Regards, Henk Hoos.

Condition: like new (used), used (as new) mass finishing machine from PERS semi-automatic mass finishing machine with container for separating abrasives and workpieces. No additional equipment required for separating. Technical data: Capacity: 140/65 l Ball diameter: 660 mm Dimensions (LxWxH): 1,700 x 1,300 x 1,140 mm Power: 4 kW Speed: 0-160 RPM PU coating: 26 mm Gujdpfxohr Rgfo Ag Njh

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox full bleed trimming’ finishing system. Item for sale: 1 x Xerox complete finishing system for brochure production with the following equipment: Includes A-FN13 booklet finisher Includes CZ module A-FN08 Includes 2-page trimming A-GW07 Includes Plockmatic Pro35 You will receive a complete finishing system for complete brochure production. Plug and play connection to various Xerox machines. Xerox Versant 3100 Xerox Verdant 4100 Xerox Versant 180 Xerox Versant 280 and more... Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally. Gsdoxnxy Nopfx Ag Nouh

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. Guedpfx Ashnc E Asg Neh The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. Gjdpfx Aexbta Dsg Njuh With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Condition: ready for operation (used), total height: 1,900 mm, total length: 1,250 mm, total width: 2,200 mm, empty load weight: 1,000 kg, nominal power: 3 kW (4.08 HP), Semi-automatische lintzaag Hydraulisch klemmen Normaal koelsysteem + verstuiveroptie Gujdpexcqixjfx Ag Nsh Digitale uitlezing voor snijhoek Rollenbanen inbegrepen Depth of throat: 500 Max height of workpiece: 335 mm Sawspeed: 15 - 150 m/min Length of band saw: 4400 x 34 x 1,1 mm

Year of construction: 2020, condition: used, Safe line metal detection belt Guodpfx Agsxc Iybe Noh Metal detector opening 450mm x 100mm See our other listings VMA Wekerom

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g Gedsd Ecncjpfx Ag Neuh

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 430/16, Powder Coating Line (Pass-through Polymerization Oven for Powder Paint, complete with Conveyor System and Dual Paint Booth) Basic technical data of the oven: - Max. external dimensions (L x W x H): 9.6 m x 6.6 m x 2.5 m Godpfx Aou Hib Nsg Nouh - Weight: approx. 9,000 kg - Max. operating temperature: 220°C - Max. burner power / GZ50/: 2 x 160 kW - Fan motor power: 24 kW - Power supply: 3 x 400 V +N +PE, 50Hz Maximum workpiece dimensions: - L = 2.0 m - H = 1.0 m - W = 0.6 m Included with the machine: Complete technical documentation + parts lists. The oven is integrated with an overhead conveyor system by JOKŚ. The conveyor system includes 42 m of tracks, along with a drive system and lubrication system; control system with speed regulation in the range of 0.5–1.5 m/min. APAR AR200 speed recorder, LG iG5A series inverter, EATON MFD-AC-CP4 manual power/communication module, MFD-CP4, MFD-80. Manual powder coating booth; pass-through, two-station. Paint access windows on opposite sides, offset. Max. dimension of painted workpiece: - L = 2.0 m - H = 1.0 m - W = 0.6 m A linear overhead transport system runs through the center of the booth. The booth includes 3 tanks adapted for powder recovery/color change, filtration system based on cartridge filters. End tanks equipped with screens.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. Guedpfel Dw D Esx Ag Nsh The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. The machine list is available in the documents along with information about the company. The machines have seen little use since 2019 and remain in good condition. Guodpfx Asxm Rmxeg Nsh

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, total width: 2,350 mm, throat depth: 500 mm, empty load weight: 1,800 kg, Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm herhaalde materiaaltoevoerlengte: 0-9999 mm maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Gedpfx Asxbui Teg Neuh Sawspeed: 18 > 115 m/min Length of band saw: 4200 x 34 x 1.1 mm

Condition: new, Catalog number M0297 – For the production of customized furniture – Drilling horizontally, vertically, and at an angle in wood-based panels and solid wood – 1500 mm measuring frame – Set of spacers included – Brand new machine TECHNICAL SPECIFICATIONS - Number of spindles: 23 - Distance between spindles: 32 mm - Total interaxial distance: 704 mm - Maximum tool diameter: 40 mm Guedexbzkwepfx Ag Noh - Maximum drilling depth: 65 mm - Max. size of workpiece: 740x3000x200 mm - Working table height: 860 mm - Table dimensions: 949x350 mm - Drilling head inclination: 0–90° - 2 independent pneumatic cylinders - Spindle speed: 2,800 rpm - Motor: 1.5 kW - Working pressure: 6/8 bar - Dust extraction port diameter: 80 mm - Machine packaging dimensions: 1115 x 950 x 1050 mm - Frame packaging dimensions: 1500x120x60 mm - Net/Gross weight: 271 kg / 301 kg Net price: 29,900 PLN Net price: 7,050 EUR, depending on the exchange rate 4.25 EUR (Prices may be subject to change with significant fluctuations) PRODUCT FEATURES The Maggi MS 704 is a multi-spindle drilling machine designed for fast production of customized furniture. The MS 704 is a compact machine capable of handling the complete production process, from drilling cabinet bodies to assembling flip-down fronts and system drawers of any brand. This drill enables comprehensive execution of all required holes in any technology: cam fittings, dowels, connectors, pilot holes for runners, shelf supports, hinge cups, and mounting holes for slides and actuators. The working table width without removing the side stops is 740 mm, so you can drill oversized cabinet components with ease. The machine features a patented 1500 mm measuring frame, allowing work independently of the 32 mm system. This gives you the flexibility to process workpieces up to 3000 mm in length. A new concept in furniture component drilling allows for quick material processing without the need for retooling. The measuring frame is a fixed part of the machine. Contrary to conventional drilling machines, the main operational axis is perpendicular to the spindle head, not parallel. The MS 704 is additionally equipped with height adjustment for the pressure beam, allowing you to process material up to 200 mm thick. The clamps are powered by independent circuits and are equipped with valves enabling safe operation—one clamp can be switched off when working with smaller elements. The MS 704 comes standard with a drill bit magazine and a set of spacers for positioning elements along the axis parallel to the spindle head.

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line Gusdpfx Asp T Tghsg Nsh

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. Guodpfx Ajttlfksg Nsh LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: new, New rotary lobe pump, rotary pump with electric gear motor Hy-Line Rotary Lobe Pump, industrial pump Hygienic rotary lobe pumps with stainless steel multi-lobe rotor Manufacturer JABSCO-by-Packo HP Hy-Line Type: LH76R B012& (serial no. 44927) Year of construction 2018 Delivery rate: approx. 73 m³/h Delivery rate per revolution: 3 liters/rev Delivery rate at 407 rpm gearbox speed: 1221 liters/min. Delivery pressure: max. 5 bar Rotor speed: max. 600 rpm. Pump inlet connection diameter: 152 mm Pump outlet connection diameter: 127 mm Weight of the pump unit: 165 kg Godpfx Agjitv Rle Nouh SIEMENS electric motor with gearbox Type: RX 97 DRN180M4/TF Mains connection: 400 Volt, 50/60 Hz Drive power: 18.5 kW Motor speed: 1781 rpm. (specified at 60 Hz) Gearbox speed: 489 rpm. (specification at 60Hz) Motor speed: 1480 rpm. (at 50Hz) Gearbox speed: 407 rpm. (at 50Hz) Gear ratio: 3.64 Output torque: 360 Nm very good condition - as good as new - unused from stock Application: Conveying of: Polymers paper coatings Soaps and surfactants Paints and dyes Pharmaceutical applications Food applications 2 pieces available Price per piece

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Gjdpfxjxmr Rre Ag Njuh Main layout attached