Capek Sp z o.o.
Capek Sp z o.o. from Skrzyszów:
This dealer has not yet provided a company description.
Mr Mateusz Mielańczyk
Powstańców Śląskich, 236
44-348 Skrzyszów
Poland
Slaskie
GAG Press MAE S 40 RH
Press capacity: 40 ton Daylight: 550 mm Uppuvyi8Ej Stroke: 150 mm Ram speed down: 50 mm / sec Ram speed up: 85 mm / sec Throat depth: 250 mm Table surface area: 1.400 - 4.900 x 280... ...
Hydraulic C-Frame press PROFI PRESS PPCT - 100
Press capacity: 100 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 800 x 500 mm Slide area: 800 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Work... ...
Hydraulic C-Frame press PROFI PRESS PPCT - 60
Press capacity: 60 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Worki... ...
Hydraulic C-Frame press PROFI PRESS PPCT - 30
Press capacity: 30 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Worki... ...
Hydraulic C-Frame press PROFI PRESS PPCM - 50
Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach spee... ...
Hydraulic press DUNKES HZ 63
forming force 63 tons Hu3Quyk... ...
Single Column Press - Hydraulic BECKER & VAN HUELLEN OK 10/224
pressure 10 t throat 235 mm stroke ca. 400 mm stroke speed - idle stroke downwards 4,5 m/min Umcpjh3Iad stroke speed - idle stroke upwards 10 m/min dayligth ca. 500/600 mm table-si... ...
Hydraulic press Hydraulische Pressen und Maschinenbau 70-9251/3, HES-16MP
Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Type: HES16MP General: Display: 0-400kp/cm2 / 0-25Mp E2Pnv2A... ...
Single Column Press - Hydraulic PME PHY 160C
pressure: 160 t distance between columns: mm stroke: mm ram stroke speed: Arbeitsgang: 69 mm/sec daylight dimension : table/slide up: 800 mm throat: mm ram stroke: 600 mm ram spee... ...
Hydraulic single column press WMW Zeulenroda PYE 160 S
Available immediately from location : Cpkdlkcsew Hydraulic single column press WMW Zeulenroda Type PYE 160 S Year of construction 1965 General overhaul in 2006 Pressure capaci... ...
Hydraulic press WMW Zeulenroda PYTE3.15
Manufacturer: VEB Wema Zeulenroda Dpobol Type: PYTE 3.15 Maximum pressing force: 3.15 tons Lower table: 280 x 280 mm Cylinder stroke: 280 mm Downward speed: 100 mm/sec Upward speed... ...
Single Column Press - Hydraulic DUNKES HZS 25
pressure 25 t throat 250 mm stroke 100 mm total power requirement 7,5 kW Dpflav weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m... ...
Four Column Press - Hydraulic EXNER H 4 SP-200
pressure 200 t passage width NA mm stroke 180 mm table length 690 mm Btsinvc9Hs table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machi... ...
Single Column Press - Hydraulic DUNKES HZS 75
pressure 75 t throat 280 mm stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg Dpfkwv dimensions of the machine ca. m... ...
Single Column Press - Hydraulic SAHINLER GHP 100
pressure:100 t throat:280 mm piston stroke:300 mm Dpfcqz table-size:1000 X 600 mm dimension of ram:600 X 400 mm total height over floor:300 mm length in width:1200 mm voltage:380 V... ...
Hydraulic press DUNKES HZS 75
High-speed runner - Force: 75 kN - Stroke: 150 mm - Installation height: 500 mm - Projection: 330 mm - Rapid lowering speed: 400 mm/s - Working speed from partial load: 40 mm/s - W... ...
Single Column Press - Hydraulic DUNKES HZ 6,3
pressure:6,3 t throat:170/180 mm stroke:310 mm power capacity:3 kW dayligth:775 mm weight of the machine ca.:1,5 t clamping table:470 x 330 mm table height over floor:800 mm D7Va70... ...
HYDRAULIC H TYPE ECONOMIC PRESS DURENDUS DHB
Capacity: 2500 kN (250 tons - at 245 Bar) Control Type: Two-hand operation -- Main Motor: 11 kW (IE-3) Main Pump: 45 cc = 65 L REXROTH - Axial piston pump Speed: Forward: 100 mm/... ...
HYDRAULIC C TYPE SINGLE ACTION PRESS DURENDUS DCS
Capacity: 1000 kN (100 tons - at 245 Bar) Main Motor: 11 kW - / 1500 rpm Main Pump: 18 cc = 27 L/min Speed: Forward: 110 mm/s – Pressure: 12 – 5 mm – Return: 140 mm/s Installation... ...
Hydraulic Press DUNKES HZS 125
Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be ... ...
Single Column Press - Hydraulic DUNKES ESPZ 63/28
pressure 63 t stroke 650 mm throat 380 mm table surface area 650 x 1000 mm ram surface 650 x 1000 mm dayligth 850 mm die cushion stroke 220 mm die cushion area 500 x 520 mm die cus... ...
Hydraulic press Dunkes HZT10
Machine was still running at the Audi plant in Neckarsulm until 15.03.2024 C90Ktpa... ...
Hydraulic press Dunkes HZS63
The press on offer is currently being retrofitted. Bru7Nit7 Special customer requirements can be taken into account during the retrofit.... ...
Hydraulic Single-Column Press VEB Zeulenroda PYE/25/1
Connected load: 4kW, weight: 2t, an inspection is possible. P82Avrbn... ...
Single Column Press - Hydraulic DUNKES HZT 2,5
pressure:2,5 t Dnpbnh... ...