Kopp Werkzeugmaschinen

Condition: good (used), functionality: fully functional, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm  Control Siemens 840 DsL  NC rotary table for 4-sided machining 1250 mm x 1250 mm  Horizontal spindle HSK100  Spindle 2500 rpm HSK 100, 2200 Nm spindle torque  Approx. 9500 spindle hours  Tool changing system HSK 100 / 40 places  Chip conveyor Bledpfx Aoxt Emmeacop  Coolant supply  Blow-off device inside / outside air  IKZ 60 bar for deep hole machining  Full enclosure  Large interference circle 2300 mm  2-way pallet changer  Short delivery time, subject to prior sale  Year of manufacture 2010

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 42 kVA, total length: 5,680 mm, total width: 3,170 mm, table load: 400 kg, rotary table diameter: 570 mm, overall weight: 15,300 kg, spindle speed (max.): 21,000 rpm, spindle nose: HSK-A63, tool length: 365 mm, tool diameter: 170 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, CNC Machining center GROB G350 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2018 CNC control: SIEMENS 840D sl Number of simultaneous axes: 5 Stroke X axis: 600 [mm] Stroke Y axis: 855 [mm] Stroke Z axis: 750 [mm] Rapid traverse rate X axis: 70000 [mm/min] Rapid traverse rate Y axis: 45000 [mm/min] Rapid traverse rate Z axis: 90000 [mm/min] Max. load on table: 400 [Kg] Stroke A axis : swiveling area of rotary table: -185 / +45 [°] B axis swivelling stroke: 360 [°] Table surface Ø: 570 [mm] Spindle type: HSK-A63 Max. spindle speed: 21000 [rpm] Spindle power: 39 [kW] Tool changer magazin number of stations: 60 Max. tool length: 365 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 170 [mm] Rated current: 61 [A] Total power required: 42 [kVA] Supply voltage: 400 [V] Bedpfx Aajxt El Necjlp Machine dimensions: 5680 x 3170 [mm] Weight: 15300 [Kg] EQUIPMENT INCLUDED: x1 Renishaw OMP60 part probe x1 High pressure coolant pump IKZ: 10–80 [bar] x1 Coolant chiller with air-cooled refrigeration unit: 13 [kW] x1 GROB spindle diagnostics (GSD) software option x1 Tool cleaning device x1 Decentralized work area mist collecting system x1 Automatic door setup x1 Chip conveyor x1 Interface for pallet changer x1 Oil skimmer for waste oil collection Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, Axa, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, but also CNC milling, drilling and tapping machines, as well as CNC grinding machines.

Condition: excellent (used), Year of construction: 2017, High-Performance 5-Axis Machining Center POSMILL H800 U Year of manufacture: 2017 Operated in single-shift mode Large spindle cooler Full Heidenhain measuring systems installed on all axes Heidenhain 530 control unit Kessler spindle, 18,000 rpm Kessler rotary swiveling arm, swing diameter 800 mm, fully usable with zero-point clamping system New maintenance scheduled for April 2025, rotary union replaced (€8,600) ————— Technical Data: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm (A-/C-axis) Swivel range approx. -100 to +120° and -120 to +120°, C-axis endlessly rotating 360° Bodpfx Aaoxtnikjcjlp Table diameter: 800 mm Tool holder: HSK 63 Tool positions: 96

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3,796 h, functionality: fully functional, machine/vehicle number: S2909835010226, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 21,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerful HSK-A 63 Motorizied spindle with 21.000 rpm - pallet change system for 2 pallets - High-pressure cutting fluid system (40 bar) _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³ Machine control SIEMENS SINUMERIK ONE Swivel axis calibration GSC Advanced Energy efficiency package EEP1 Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis, PW) Motorized spindle HSK-A 63, 21,000 rpm, 35/47 Nm, 29/39 kW, oil-air lubrication GROB spindle diagnostics GSD Double disk-type tool magazine HSK-A 63 with 105 (45+60) tool pockets Tool cleaning device Tool coding, system BIS-M (BALLUFF) Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Pallet change system for 2 400 x 400 mm pallets Setup station door, automatic, for manual and automatic loading and unloading 2x Pallet 400 x 400 mm, T-slots, with pallet changer hook Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Bjdpfx Aoxtknpeacelp Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Flushing unit (Z-axis) Part clamping system in the work area KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1)  Cooling unit for hydraulic proportional valves Part clamping system in the setup station of the pallet changer KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP6: Compressed air, seating check system with SOPA air gap sensor make FESTO (P6.1) Work area camera for machine control panel GROB⁴Pilot (ROTOCLEAR) Radio touch probe RMP400 (RENISHAW) 12-month warranty

Condition: used, Year of construction: 2014, functionality: fully functional, For sale is a 5-axis machining center with Lang automation in well-maintained condition. The machine is a WT VZU625 (manufacturer: Litz), identical in construction to models from Axon, Wemas, and others. Machine: WT VZU625 Year of manufacture: 2014 Travel paths: X620/Y520/Z460 mm Tool magazine: 48 slots, SK40 Internal coolant supply: 30 bar Control: Heidenhain iTN530 Additional equipment: measuring probe, tool measurement, handwheel, Lang zero-point clamping system, documentation Bsdpfx Aasxrzczjcslp Automation: Lang Eco20 Year of manufacture: 2018 Additional equipment: clamping unit for the machine (without vices), documentation An invoice with VAT shown separately will be issued.

Condition: good (used), Year of construction: 2007, Universal Machining Center Machine type: Hermle U 740 Control: Heidenhain iTNC 530 Year of manufacture: 2007 Spindle running hours: 8,790 h Operating hours: 10,455 h TECHNICAL DATA: Travel distances: X-axis: 915 mm Y-axis: 500 mm Z-axis: 500 mm B-axis: -5 / +95° C-axis: 360° Rapid traverse (X/Y/Z): 30 / 30 / 20 m/min Number of controlled axes: 5 Bodpfexrcvcjx Aacolp Distance table surface – spindle nose: mm Speed range: 12,000 rpm Drive power: 17.5 / 32 kW Torque: 108 Nm Tool holder: SK 40 Tool changer Tool positions: 28 NC rotary table Table size: Ø 630 mm Features: Internal coolant supply (IKZ): 60 bar Coolant tank: 640 l Chip conveyor 3D probe: Renishaw Through-spindle air

Condition: used, Year of construction: 2023, operating hours: 1,280 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: CELOS mit Siemens 840D sl Operate, rotational speed (max.): 15,000 rpm, overall weight: 7,730 kg, operating hours of spindle: 716 h, number of slots in tool magazine: 60, load hours: 1,280 h, milling spindle speed (min.): 20 rpm, DMU 50 3rd Generation Simultaneous - Motor spindle speedMASTER HSK-A63 - 3D quickSET - Mode of operation 4 - MPC - Machine Protection Control for machine protection via rapid shutdown - Electronic handwheel - 42 m/min rapid traverse - Clamping surface D630 x 500 mm Swivel range -35° to +110°, rotary axis 360° Bsdpsxrcr Rjfx Aacslp Including direct measuring systems for B and C axes - Infrared probe Renishaw PP 60 optical - LC50-DIGILOG laser measuring system - Rotating viewing window - Scraper belt chip conveyor Internal coolant supply (IKZ) Paper band filter 40 bar/23 l/min/tank 600 l incl. Double changeover filter 50 μm for IKZ - Cabin roof - External coolant/air blast switching via M-function Rinsing gun for chip flushing Oil and emulsion mist separator system with mechanical filter 1100 m³/h - Financing can be redeemed or transferred

Condition: used, Year of construction: 2010, x-travel 600 mm y-travel 770 mm Bedexq Hk Iepfx Aacjlp z-travel 675 mm Control Heidenhain iTNC 530 table surface area 400 x 400 mm spindle tunring speed 16.000 U/min tool taper HSK 63 number of tool places 40 Pos. spindle hours ca. 18.075 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - put into operation in 2012 - Internal cooling system - Renishaw 3D probe - Dual pallet changer - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 600 mm z-travel 500 mm table surface area 1000 x 560 mm Bsdpexq Hf Sefx Aacslp spindle taper HSK 63 A spindle turning speed - stepless 20 - 16.000 U/min spindle power 15 kW max. torque on the spindle 9 Nm feeds x/y/z -stepless 1 - 30.000 mm/min rapid traverse 35 m/min feed power 8000 N ATC 30 Stationen control HEIDENHAIN, TNC 430 total power requirement 32 kVA weight of the machine ca. 7,2 t dimensions of machine L x W x H 2,75 x 2,30 x 2,95 m Accessories: HEIDENHAIN probe TS 632, various tool fixtures, chip conveyor, coolant

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Siemens, controller model: 840D SL, table load: 500 kg, rotary table diameter: 650 mm, spindle speed (max.): 12,000 rpm, coolant supply: 22 bar, 5-Axis Machining Center Manufacturer: Spinner Model: U5-620 Year of manufacture: 2014 Control: Siemens 840DE SL + ShopMill Operating hours: n/a Spindle hours: n/a S/N: XXXXX Technical specifications: ----- • Travel X-Y-Z: 620 x 520 x 460 mm • C-axis: 360° • B-axis: -90°/+110° • Swiveling rotary table Ø650(500) mm • Rotary table load capacity: max. 500 kg • Spindle speed: 12,000 rpm • Magazine: 32x SK-40 • Coolant system 22 bar incl. through-spindle coolant, bed flushing, paper band filter with 350L additional tank capacity • Direct optical measurement systems on rotary axes • Electronic thermal sensors for length expansion compensation of milling spindle • Option: Increased rapid traverse (48 m/min) • Option: Glass scales on X-Y-Z • Option: Fully enclosed machine (top) • Option: Sinumerik MDynamics • LED work area lighting • 3D wireless probe • Chip tray • Machine weight: approx. 7.5 t • Dimensions: 3,500 x 3,500 x 2,800 mm Bodpfx Aajxqyugjcolp Accessories: ----- • Documentation • Rinse gun • Electronic handwheel • Work area extraction system Availability: December 2025

Condition: new, Year of construction: 2025, machine/vehicle number: N2761135210252, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, controller manufacturer: Siemens, controller model: ONE, rotational speed (max.): 16,000 rpm, coolant supply: 40 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW - 117 tools in the system - latest machine generation _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Work area door, automatic, for manual and automtic loading/ unloading Machine control Siemens ONE with GROB4Pilot GROB- NET4Industry starter package Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-A 63, 16.000 min-1, 159/206 Nm, 25/32 kW, oil- air lubrication Bjdoxqlp Nopfx Aacjlp Double disk-type tool magazine HSK-A 63 with a total of 117 tool pockets Tool cleaning device Electromechanical tool breakage detection device Palette 400 x 400 mm, grid holes, without pallet changer hook Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (11 kW) Compressed air feed through spindle center Flushing unit for the base of the work area Air gun at the work area Flush gun at the work area Flushing unit (Z- Axis) Preparations for use of a machine accuracy package Remote machine diagnostics with access control switch 12-month warranty

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 18000 kg Main Drive Bljdpfx Aaoxqibpscop Spindle speed range 17500 Number of axis 5 Movement X-Axis Movement 600 mm X-Axis Rapid Traverse 45 m/min Y-Axis Movement 600 (975) mm Y-Axis Rapid Traverse 45 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 45 m/min Tools Type of tool holder HSK A63 Media Chip conveyor Yes Additional Equipment Double Tool Change Table 2 Swivel Units for Clamping Bridge 2 NC-Controlled Swivel Units 4 NC-Controlled Rotary Tables KNOLL Coolant System 70 Bar High-Pressure Pump Chip Conveyor This 5-axis EMAG BAW 06-22 double-spindle machining center in 5-axis design (on both sides) was manufactured in 2006. It features double spindle machining, a 600 mm spindle distance, and X/Y/Z travels of 600/975/500 mm. The machine includes a high-speed milling spindle at 17,500 rpm, dual 72-unit tool magazines, and a robust HSK A63 tool holder. Additional features include a KNOLL coolant system, 70 bar high-pressure pump, and a chip conveyor. If you are looking to get high-quality milling capabilities consider the EMAG BAW 06-22 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, DECKEL MAHO Blodpfx Ajxp Htasacep DMU60mB - Full 5 axis Simultaneous Year 2011 X730 Y560 Z560mm Heidenhain iTNC 530 Spindle 18,000rpm Taper BT-40 ATC 24 magazine NC Rotary Table (C axis) Integrated on Rigid Table (0.001mm x 360 degree) NC Swivel B axis incl. Hydraulic Clamping (-120 degree / +30 degree) Spray Pistol 2bar Electronic Handwheel - iTNC530 Application tuning cycle 3D quick set system Chip Conveyor

Condition: used, Year of construction: 2020, operating hours: 20,700 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC640, rotary table diameter: 500 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: HSK63, number of slots in tool magazine: 80, Equipment: chip conveyor, rotational speed infinitely variable, POS H500 U 5-axis X 650 Y850 Z500 80-position tool magazine HSK63 15,000 rpm spindle (new spindle) Chip conveyor Bedpfx Asxpvq Ijacolp Coolant tank 1000 liters Internal coolant supply 40 bar Air blast through spindle Heidenhain TNC640 Rotary table, tabletop D500 Rotary table, 360 degrees continuous rotation Torque drive A and C axis 3D touch probe Heidenhain

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 670 Y-Axis Movement 600 Z-Axis Movement 820 Media Internal cooling Yes Additional Equipment Heidenhain rotary measuring system Bedpoxpkryefx Aacslp Heidenhain linear measuring system X,Y,Z This POS H800U Universal Machining Centre was manufactured in 2018 in Germany. It has 5 axis (X = 670, Y = 600 mm, Z = 820 mm / Swivel range -100 to +120 degrees, Rotary table 360 degrees endless) and comes with a HSK-A63 spindle with 18,000 rpm. The machine is operated by a iTNC530 HEIDENHAIN control and is equipped with a Heidenhain rotary and linear measuring system X,Y,Z. As extras it features air through spindle, internal coolant supply 20 bar with belt filter unit, a KESSLER table with diameter 800 mm, tool measurement with BLUM laser and operation mode 4. See tech specs overview as PDF (DE) attached. Application Types Milling

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, 5-Axis Machining Center Manufacturer: Hermle Model: C20U Year of Manufacture: 2008 Control: Heidenhain iTNC-530 Power-on hours: approx. 35,000 h Program run time: approx. 14,500 h S/N: XXXXX Technical Specifications: ----- • Travel range X-Y-Z: 600 x 450 x 450 mm • C-axis: 360° • A-axis: +/-115° • Swivel rotary table Ø280 mm • Spindle: 18,000 rpm • Magazine: 30x HSK-A63 • Standard coolant system • Blowing air through spindle + blow-off device • 3D probe Renishaw • Blum laser for tool breakage detection and measurement Bjdpfxsxphuro Aacolp • Electrical thermal compensation • Increased accuracy in X-Y-Z-A-C axes • Option: KinematicOpt • Chip tray Accessories: ----- • Documentation • Rinsing gun • Handwheel

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: S/N 1193, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, rotary table diameter: 600 mm, spindle speed (max.): 16,000 rpm, spindle motor power: 35,000 W, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Full working, perfect condition machine for sale! * 5-axis simultaneous * HEIDENHAIN iTNC 530 controller * Spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW - Spindle -> 4,200 operating hours (almost new!) - Axes -> 16,800 operating hours * HSK-A 63 tool magazine with 34 tool stations * Additional TM99 side tool magazine with 99 tool stations * HEIDENHAIN remote controller * KinematicOpt * DCM Collision (HEIDENHAIN) * Job InfraRed touch probe with HEIDENHAIN software Bjdpfoxpf Hfjx Aacolp * High-pressure through-spindle coolant system (38 bar) * Air blast through spindle * Chamber mist extractor * Tool cleaning system * Chip conveyor * Oil skimmer for coolant tank * Coolant gun * Coolant washdown for chamber * Remote machine diagnostics (via network) * Voltage 400 V, 50 Hz, TN-S Machine is located in production facility in Mielec 39-300, Poland, connected and available for trials. Buyers - Welcome!

Condition: used, Year of construction: 2002, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm weight of the machine ca.: 6,5 t Number of axles: 5 St. spindle turning speed range: 18.000 U/min numbers of tools in magazin: 24 tool taper: SK 40 Round Table B-Axis * Bedpfoxn Swnjx Aacslp

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, For sale: 3-axis CNC milling machine, Mikron VCE 600 Pro The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis travel: 600 mm Blodpfx Aaoxnprvecsp Y-axis travel: 500 mm Z-axis travel: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Included in the offer: Chip conveyor, interior extraction, through-spindle coolant system, handwheel control, coolant gun, 3D probe, Renishaw tool measurement system Not included: Clamping devices, tool holders Transport and loading can be organised across Europe at additional cost upon request. Prices are quoted net plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque Bedpfx Aaoxmr T Tscjlp • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole drilling • Fully enclosed machine • Large interference circle 2800 mm • Includes washing gun • Short delivery time, subject to prior sale

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, Maho DMU 50 3rd Gen / 5 axes Year of manufacture: 2018, Control: Siemens 840 D SL Operate Total spindle hours: 1870, Travel X/Y/Z: 650/520/475 mm, 2-axis tilting rotary table Ø 630 x 500 mm, Tilting axis: -30° / +110°, Rotary axis: 360°, Direct measuring systems for B + C axis, Tool changer: 30 positions, Bljdpfexmrwxjx Aacep SK 40, Spindle speed up to 15,000 rpm, Active spindle cooler, Direct measuring systems, Internal coolant supply (IKZ) 40 bar, Paper band filter, Chip conveyor, 3D measuring probe, Machine Protection Control, Coolant and compressed air switching via M function.

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm Blsdpfsxmagzex Aacjp z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 8,5 x 5,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 UP Dynamic - FASTEMS - incl. FASTEMS FPC-400 Pallet-System / 15-pos. - palletchanger - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar Bjdexluf Aepfx Aacslp handwheel HEIDENHAIN HR-410 total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: excellent (used), Year of construction: 2013, Spinner U5-620 vertical 5-axis machining center Year: 2013 Control Siemens 840D SL ShopMill Travels X 620 mm Y 520 mm Z 460 mm Bljdpfxsxlr Ubj Aacep Min. distance between spindle and table 150 mm Max. distance between spindle and table 610 mm Feed/rapid traverse 32 m/min Table dimensions Ø 650 / 545 mm Max. Table load 500 kg Spindle max. speed 9000 U/min Tool holder SK40 Tool changer 24-positions Tool magazine Max. Tool length 290 mm Max. Tool weight 7 kg Dimensions and weight Dimensions 3.133 mm x 2.415 mm x 2.920 mm Weight ca. 7.500 kg Accessories/options: - complete documentation - swarf conveyor - SK40 tool holder 20 pieces, pull studs - coolant tank Low spindle hours. Very nice condition. Under power in our warehouse, possible to test it anytime!

Condition: ready for operation (used), Year of construction: 2010, Make: MAZAK Type of machine: Variaxis 630-5X Year of manufacture: 2010 Control system: Mazatrol Matrix Machine's weight: 17.000 kg Tool holder: HSK 63A x-travel: 630 mm Bedpfsxk Uvxox Aacjlp y-travel: 765 mm z-travel: 600 mm Speed range: 12.000 U/min max. Table load: 500 kg Overall dimensions: 3.239 × 2.495 × 4.350 mm Table dimensions: Ø ca. 630 mm Number of tools in the magazine: 80 Plätze Internal coolant supply: 40 bar