Palali Trading

Condition: like new (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: GG108F5658, The machine has been used very little and is in very good condition; the conveyor belts are like new, with no remarks regarding the machine’s operation. Hsdoxtaz Espfx Aacsw

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: GG810S-22736, total length: 8,200 mm, overall weight: 4,200 kg, input frequency: 50 Hz, Technical Specifications of the Machine Entry Conveyor: Length: 2.6 m Height: 80 cm Exit Conveyor: Length: 2.4 m Height: 80 cm General Dimensions: Total machine length: 8.2 m Table height: 2.4 m Load capacity: 350 kg / m² of working area (3,500 kg / 10 m) Opening: 55 mm Technical Features Independent (disengageable) locking of entry and exit conveyors. Stainless steel tank 200 / 850 / 300 with integrated pump compartment and filtration grid. Round stainless steel cerium oxide tank 800 / 300 with agitator, pump, and filtration grid. Automatic lubrication cycle programmable via the computer (short cycle / long cycle). Chain system mounted on bearings with reinforced shafts. Grinding Wheels (10 total): Diamond – fixed Diamond – fixed Diamond / Resin – fixed Polish 40 – 9RS40 – Pneumatic Polish 60 – 9RS60 – Pneumatic Cerium / Felt – X5000 – Pneumatic Diamond – Bevels – fixed Polish 80 – 9RS80 – Bevels – Pneumatic Diamond – Bevels – fixed Polish 80 – 9RS80 – Bevels – Pneumatic Hjdpfx Aexr Dngsacjw Additional Technical Information Inclination: up to 45°, allowing edge polishing from 0° to 45°. Power consumption: approximately 27 kW. Polish 1, Polish 2 and Cerium wheels can be operated at two motor speeds. Integrated computer allows for almost full parameter adjustment on the machine. Optional pads enable polishing of smaller plates up to 80 mm in height

Condition: good (used), Year of construction: 2022, operating hours: 7,000 h, functionality: fully functional, total length: 7,800 mm, total width: 1,600 mm, total height: 2,300 mm, 11 cup wheels vertical glass grinding machine total running meters 600.000 working hours 7000 min. glass height : 35 mm glass thikness : 3 - 40 mm speed : 0,5 - 5 m/min. total power : 27 Kw Hodjxrbqljpfx Aacsw weight : 3530 kg glass weight 350 Kg/m Working videos and technical details on demand

Condition: used, Year of construction: 2004, BAVELLONI GEMY V10 – Year 2004 Straight line edger Hsdpfxexqyxfo Aacsw 10 spindles Thickness: 3 – 51 mm Variable angle: 0 – 45° Minimum sheet height: 70 mm Working speed: 0.5 – 5 m/min Pneumatic supply: 8 bar Power: 27 kW

Condition: not inspected (used), Zafferani Glas Company Flat 4FPE/25 Length 4.30m Hodpexp A H Aofx Aacow Height 2.36m The machine was purchased from a bankrupt company. The previous owner claims it worked fine the last time he turned it on.

Condition: good (used), Year of construction: 2007, operating hours: 1,500,000 h, functionality: fully functional, machine/vehicle number: 07016512 07, For sale: Bovone ELB 10 edge polishing machine, cer, year 2007. The machine is 100% operational – ready for immediate use. Dismantled at the customer’s site in August this year – replaced with a new one. We have a video recorded during the machine’s operation just before dismantling. The machine is prepared for transport. Hsdpfx Ajxpwc Esacew

Condition: like new (used), Year of construction: 2016, operating hours: 4,600 h, functionality: fully functional, year of last overhaul: 2022, Vertical CNC left to right 2600x5000. With or without washer. For milling, drilling, and edging glass on all 4 sides. Thickness 3-25 mm. Hjdpfsxlt H Sjx Aacsw

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Automatic glass edge arrising (seaming) machine LISEC KSR-25 + WRA-1000 Year of construction: 2015 Working height: 2500 mm Hsdpfx Aaoxln Nujcjw Working direction: from right to left Perfect arrising by diamond belts and wet grinding process Wet treatment for smooth and accurate trimming of the glass edges in very short cycle times Water cleaning WRA-1000 (year: 2015) included Excellent condition Good working order Very little used As is Available immediately

Condition: used, Year of construction: 2007, Adelio Lattuada Delta M4 Round corner grinding machine with 4 grinding motor Hedpfx Aoxfi Dyeacew

Condition: good (used), Horizontal belt sander. Working height: 950 mm Hedpfxsxdb D Ao Aacow Height: 1300 mm Width: 700 mm Depth: 1000 mm Weight approx. 80 kg (net)

Condition: good (used), Year of construction: 1994, Grinding belt dimensions: 100 x 1830 mm Height: 1700 mm Width: 2830 mm Hsdpfexdbtqex Aacsw Depth: 1000 mm Weight approx. 250 kg

Condition: used, Year of construction: 2008, functionality: fully functional, CMS Tecnometal B7 4.31 Horizontal 5-Axis cnc working center for Glas Axis Movement: X-Axis: 3.765 mm Y-Axis: 4.330 mm Z-Axis: 330 mm C-Axis: 720° B-Axis: 0-90° - Aluminium Table 3.210 x 4.320 mm - Elektrospindle 10,0 kW 0-10.000 rpm - Toolmagazin - CAD/CAM Hodpfx Aexck D Asacjw

Condition: used, functionality: not functional, Bovone 371 glass beveling machine, disconnected and ready for loading. Working daily until recently, but limited to around 1m length of glass, due to needing some belt renewals. Now breaking for parts, all available for sale. Prices subject to part required. Hsdjxbq Dyopfx Aacow

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a flat glass processing machine from BOTTERO Manufacturer: BOTTERO S.p.A. Model: PRATICA PLUS Serial Number: 30100100003521-05638_011 Year of manufacture: 2020 Drawing number: E-K3XX-014-1a Hedpfxsxbf Erj Aacjw Voltage: 400 V, 3~ Frequency: 50 Hz Rated current: 36 A Circuit breaker (Isc): 10 kA Intended use: Machine for flat glass processing The machine was manufactured in 2020, is in good condition, and is designed for precise processing of flat glass. It is immediately ready for operation and ideally suited for professional use. If interested or if you have further questions, please get in touch – viewing is possible by appointment at any time.

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale is a flat glass processing machine from BOTTERO. Hjdpfx Aasxbf Dzecjw Manufacturer: BOTTERO S.p.A. Model: Victralux 108FX Serial number: 30600100001751-05636_011 Year of manufacture: 2020 Drawing number: 108FX-023 Voltage: 400 V, 3~ Frequency: 50 Hz Rated current: 23.5 A Circuit breaker (Isc): 10 kA Application: Flat glass processing machinery The machine is from 2020 and was designed for precise flat glass processing. It is in good, well-maintained condition and is ready for immediate use. If you are interested or require further information, please contact us – viewing by appointment possible.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Hsdpfxow U Nzrs Aacjw

Condition: used, Year of construction: 1993, functionality: fully functional, total length: 6,000 mm, total width: 1,500 mm, total height: 2,500 mm, Glass grinding machine Hodjw Ucn Eopfx Aacew

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 6,600 mm, total width: 1,000 mm, total height: 2,500 mm, input voltage: 380 V, I. SINGIP PERIPHERAL GLASS GRINDER MODEL SZM 8 Peripheral glass grinder manufactured by SINGIP (China), model SZM 8 (featuring 6 peripheral wheels), production date November 2021 – designed for grinding the edges of flat glass of various sizes and thicknesses. The first three diamond wheels are used for coarse and fine grinding, while the remaining three wheels are for glass polishing. Depending on the selected wheel set suitable for the glass thickness, the desired edge profile can be achieved (C-edge or Pencil edge). The grinder is in very good condition, ideal for rapid processing of glass with consistent thickness, currently dismantled. Model: SZM 8 Minimum workpiece size: 100 x 100 mm Glass thickness: 3–12 mm Processing speed: 0.5–2.5 m/min Dimensions (length*width*height): 6600 x 1000 x 2500 mm Installed power: 16 kW Power supply: 380V, 50Hz Hedpfx Asw T Rphoacjw

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bavelloni glass washing machine Hodpfjw Tripsx Aacew 2 pairs of brushes two water circuits operational

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 79125504, power: 22 kW (29.91 HP), workpiece height (max.): 25 mm, number of spindles: 11, product length (min.): 35 mm, product width (min.): 35 mm, TECHNICAL DETAILS Bevel angle: 3-45° Thickness: 3-25 mm Min. machinable size: 35 mm x 35 mm Max. bevel width: 60 mm Speed: 0.4-5.4 m/min MACHINE DETAILS Weight: 4,400 kg Power: 22 kW EQUIPMENT 11 spindles Water tank with pump 6 diamond grinding wheels 1 front arris grinding wheel 25 1 pencil edge grinding wheel 3 polishing discs Hjdjw Sll Uopfx Aacsw

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working height: 800 mm, feed rate X-axis: 6 m/min, workpiece height (max.): 30 mm, product length (min.): 40 mm, product width (min.): 40 mm, TECHNICAL DETAILS Glass thickness: 3 - 30 mm Minimum size: 40 x 40 mm Feed speed: 0.6 - 6 m/min Working height: 800 mm Hedpjw Sli Tjfx Aacsw MACHINE DETAILS Electric power: 22.5 kVA (18 kW) Dimensions & Weight Dimensions: 8,100 x 1,400 x 2,700 mm Weight: 2,700 kg EQUIPMENT 2 diamond wheels for straight edge 1 diamond wheel for rear edge 1 polishing wheel for rear edge 1 diamond wheel for front edge 1 polishing wheel for front edge 2 flat edge polishing wheels Grinding water tank with pump

Condition: excellent (used), Year of construction: 2016, Schraml Topdrill M-RX 130 Vertical cnc glas milling and drilling centre Processing: Max. Glas-Length: 3.200 mm Max. Glas-height: 1.300 mm Min. Glas-length: 600 mm Min. Glas-height: 130 mm Thickness: 4-20 mm Options: Hsdsw Skzhspfx Aacew - 2x Elektrospindle 5,5 kW 0-12.000 U/Min - Tool Magazin with 2x 8 slots - CAD/CAM - central lubrification

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 200665, total length: 8,932 mm, total width: 8,075 mm, input current: 220 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 380 V, Bavelloni double edging machine VX8, year 2006, 88 KW, max glass dimension 2600/1600mm, with 90° transfer. Hedew I Dz Topfx Aacew

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: GG907B-19894, total length: 7,650 mm, total width: 1,800 mm, total height: 2,700 mm, overall weight: 3,600 kg, input current: 37 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 380 V, pressure: 8 bar, The 907 B is able to produce a bevel up to 50mm in height. In a single pass, the machine produces the bevel and an arris on the front edge of the glass. Less than 28,000 working meters! Hedsw I Dxropfx Aacsw Min size: 40x40mm; glass thickness: 3-30mm; speed: 0.4-6m/min; processing angle: 3-45°; max corner edge dimension: 40mm.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, Available from stock: Bavelloni SB/10 edge grinding/polishing machine for glass shapes. Hedsw H Rpcspfx Aacsw In very good condition, always very well maintained. General technical description of the machine: The SB10 is a horizontal bevelling and edging machine, which can be operated both manually and semi-automatically for processing shaped pieces of small, medium, and large glass. The machine is designed to withstand heavy workloads and to minimize maintenance requirements. The machine is equipped with a vacuum system for clamping the glass on the faceplate. This arrangement includes a vacuum pump, a device to separate water collected from the suction cups, a water and dust filter at the pump inlet, a control pedal for the suction cups, and a vacuum gauge.