Used complete sawmills (stationary) for sale (110)

Condition: excellent (used), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB 1. PRIMULTINI Band Saw SIC 1600 -Roll diameter 1600 mm -Roll width 245 mm -Motor 75 kW 2. PRIMULTINI Band Saw Carriage Type CFE -3 Clamping Blocks -Max. Log Diameter 1000 mm 3. PRIMULTINI Operator's Cabin Complete with Control System 4. Complete Conveyor System -Cross Feed Conveyor, 4-strand, Length approx. 12 m -Hydraulic Log Feeder -Movable Unloading Roller Conveyor with Pressure Rollers -Cross Reloading Conveyor -Conveyor Belt Under the Roller Conveyor for Slabs -Vibrating Table for Slabs -Roller Conveyor with Cross Unloading -Roller Conveyor with Cross Unloading Gjdpfx Anjv R Edqeljiu The complete system was built in 1999

Condition: used, Horizontal Nienkemper BS0 block band saw Roller diameter 1100mm with mechanical manual clamping carriage Gsdsci Df Aopfx Anloiu

Condition: used, Horizontal Nienkemper Block Bandsaw Type HBS 1 1600mm roller diameter Main engine 75kW Giedpocn Dkljfx Anlou with fully hydraulic clamping carriage log clamp,log turner,

Year of construction: 2021, condition: new, Wravor WRC 1050 max.cutting length 6,5m We are also happy to configure a new log band saw according to your wishes. Gedogyw R Sepfx Anloiu

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Giodpfx Anoyr I Dmolou

Condition: excellent (used), Log band saw system Band saw stand - Brenta 1500mm roll diameter Band saw carriage Artiglio Eagle 1100 Giodpfjfhl Snox Anleu 3 trestles With complete mechanization

Condition: excellent (used), functionality: fully functional, cutting height (max.): 1,250 mm, Vertical bandsaw SCHULTE Type VB12 The machine is fully operational and functional – with new electrical installation and control system. Gijdpfx Ajyivhnsnleu The set includes feeders, conveyors, and operator cabin – all visible in the photos. Max. cutting height: 1250 mm Max. diameter of processed log: 1450 mm Length of hydraulic carriage: 5700 mm Main motor power: 55 kW Exact dimensions are shown in the drawing attached in the photos.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. Gedpfx Anjx T Azwoleiu 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: used, Schulte HB 12 horizontal log band saw -Roll diameter 1200 mm -Roll width 145 mm -Fully hydraulic tensioning carriage Godpfx Answkpp Ajleiu -Carriage drive with cable winch

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Godpfxjxtwwkj Anleiu Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: used, A complete sawmill machinery package is being sold as follows. Sale as a complete package is preferred, but individual items or reservations are possible! 1. Log infeed system, 2-strand Conveyor length: 5.5m Width: 2.8m 2. Rail car/cross conveyor, driven 3-strand Length: 4.0m Width: 2.55m Track gauge: 1.85m 3. Tensioning car, Mayrhofer with auxiliary car Track gauge: 90cm 4. Circular sawmill, Möhringer Model: OSS75 Year of manufacture: 1991 Stroke: 500mm Frame length: 750mm with drive motor with saw guide with saw blades with hydraulic saw tensioner with splitting wedge, Möhringer 5. Driven circular log transfer system Length: 9m Width: 1.4m Roller width: 1.2m 6. Spiral log transfer system Length: approx. 6m Width: 1.2m with lift for boards 7. Log transfer system Length: 14m Width: 1.1m Roller width: 0.85m with spiral log transfer system Length: approx. 7m Width: 1.1m Roller width: 0.85m 8. Cross conveyor, 4-strand Conveyor length: 2.3m Width: 4.2m 9. Double edger, Paul KME2 with cut-off saw Gsdpfxezb A R Hs Anljiu with templates with saw blades with drive motor with sawdust extractor with length sorting 10. Cut-off saw, Stihl with rail car 11. Circular saw sharpening machine, Vollmer CABG 12. Circular saw tensioning machine, RIVO GSA 13. Circular saw sharpening machine, Vollmer CNE (2 units available) 14. Forklift, Manitou MSI 50, year of manufacture 2002 with accessories 15. Wheel loader, Manitou / Ahlmann AL85t, year of manufacture 2001 with accessories

Condition: excellent (used), passing width 1.000mm, stroke 800 mm, saw motor 22 kW or 30 kW, high adjustment by gear motor with brake, automatic lubrication pump, clamping carriage 6 m with 7 m rack, 6 mechanical clamping stations Gjdpfxotzlrfe Anlsiu

Condition: used, No. 3130-02 Block bandsaw Primultini 1300 SG Used, year of construction approx. 1980 Right-hand version Roller diameter 1300 mm Blade support width 140 mm Saw blade 150 x 1.1 mm Clearance height with block carriage CFA according to drawing 1075 mm Cutting height with block carriage CFA according to drawing 700 mm Cutting width with block carriage CFA according to drawing 530 mm Electric blade guide and blade tensioning Main motor 380 V, 50 HP Block carriage PRIMULTINI CFA, length 8000 mm 5 automatic clamping blocks Electric closing and opening of the hooks Electric clamping and adjustment Hydraulic feed by means of cable pull Electro-hydraulic block turner with 2 arms Gijdpeurmvasfx Anleu System already dismantled Electrics and controls must be partially replaced Total weight approx. 10 tons Sale on behalf of customer, ex location near 92660 Neustadt, without transport and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Aligning roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute Gsdpfx Anjy Uzhfslsiu - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE SAWING LINE - VTZ 1400 PLUS log band saw with BM 900 chipper canter, including all necessary conveyors - FRC chipping edger with 3D scanning and optimisation, including all necessary conveyors - Automated stacking machine Gjdpfx Aoxlym Esnlsiu - Waste conveyors

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed Godpfxswp E E De Anlsiu 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 Gjdpfx Aewp E Tnonljiu AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: excellent (used), functionality: fully functional, Linck High-Performance Frame Saw Type DS 71 Frame opening 710 x 710 mm. Stroke 500 mm. Speed 320 rpm. Hydraulic roller lift with adjustable roller pressure. Hydraulic feed continuously adjustable from 0 to 13 m/min. Automatic overhang adjustment of the saw frame. Electromagnetic remote control. Jansen hydraulic saw blade tensioner with blade mount. 55 kW motor with gearbox. Hydraulic clamping carriage with hydraulic auxiliary carriage. Electrical switch cabinet with control and operator's panel. Dismantled and loaded free on truck. Gsdpfx Anjuqmu Hsloiu A video showing the saw in operation can be provided on request.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Gijdpfeyub Ahjx Anleu

Condition: refurbished (used), Year of construction: 2002, Sawmill ARTIGLIO Year - 2002 - ( Refurbished in 2023 ) Technical Details : Gedpev Ny Nxofx Anlsiu - Flywheel - 1300 mm - Flywheel band - 168 mm - Max. blade length - 8860 mm - Three - Phase 400V 50hz Motors - Primary motor power - 55,8 kW - Blade tension motor - 0,55 kW - Pushing blade guidemotor - 1,5 kW - Flywheel inclination motor - 0,12 kW - Hydraulick brake unit motor - 1,5 kW - Central Crowing Equioment Consists : - 3 Log clamping pressure - Fixed hooks - Mobile knockers with 3 fixed positions - Hydraulicl log turner - El . divider with 50 works programs - Transversal vice movement with two speed motor 1,8 - 8 mt./min. - Hydrostaic advancement with steel cable towing - Comand pult - Automatic centralized rubrication - Pantograph for cable

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Logs Wagon - Trolley - BONGIOANNI Technical Details : Gjdpfxorx Rq Es Anleiu Year - 1997 Wagon length - 7 m Number of staples - 4 Eqipment Consisits : 1- Wagon - trolley 2. El. Cabinet 3. Comand pult 4. Hydraulic drive

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Gijdjui Ifcepfx Anlou

Condition: excellent (used), Year of construction: 2022, Horizontal 6-Head Resaw Year of manufacture: 2022 Giodpfeylw Sasx Anlsu Technical data: Motor: Electric 11 kW Cutting dimensions: Max. cutting width (cant timber): 30 cm Max. cutting height: 20 cm (18 cm with electric feed) Min. cutting height: 0.6 cm Min. material length: 120 cm Feed system: Steel belt conveyor Feed speed: 0 – 20 m/s Saw band: Length: 4010 mm Width: 32 mm / 35 mm Band wheels: Diameter: 600 mm Multisetwork – Allows cutting height of each individual unit to be set via the control panel. Technical condition: very good. Technical documentation and further photos are available.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 10,100 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 19,500 kg, cutting height (max.): 800 mm, input current: 250 A, input voltage: 400 V, saw blade width: 500 mm, main saw diameter: 500 mm, Equipment: cabin, centralized greasing system, scorer, - Log circular saw, fully functional - max. log diameter 800 mm, max. length 6 m, individual pieces up to 8 m - max. timber size 180/180 mm, in wide board mode 310/180 mm - automatic timber sorting Giodpfeyc Ncrsx Anleu - price includes log feeder, 2x outfeed conveyors, and 1x sorting conveyor

Year of construction: 1984, condition: excellent (used), Frame saw with 600 stroke Gijdpfxsfym Eds Anlou width 950 mm height 915 mm power 132 KW