Schürfeld Umformtechnik GmbH

Year of construction: 1999, condition: ready for operation (used), Machine tool manufactured in 1999. This STAHLI FLP 700 features a copper plate with a diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the STAHLI FLP 700 machine we have for sale. Contact us for further details. • Copper plate Gsdpsy R Tx Uofx Abmoit • Diameter: 700 mm

Year of construction: 1990, condition: ready for operation (used), Lapping machine manufactured in 1990. This MYLAP 700 features a power of 7.5 kW and operates at a voltage of 380 V. If you are looking to get high-quality lapping capabilities, consider the MYLAP 700 machine we have for sale. Contact us for further details. Gedpfsy R Txnex Abmoit • Voltage: 380 V • Power: 7.5 kW

Year of construction: 1983, condition: ready for operation (used), Lapping machine manufactured in 1983. This MYLÄP 400 features a lapping plate diameter of 400 mm, suitable for precision lapping applications. If you are looking to get high-quality lapping capabilities, consider the MYLÄP 400 machine we have for sale. Contact us for further details. • Lapping plate diameter: 400 mm Giedpfoy R Trnox Abmot

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Gjdpfx Aey R Tk Rsbmeit Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: ready for operation (used), Year of construction: 1985, Immediately available ex location: Three-roll plate bending machine MD Durst Model RWASV 2505 Year of manufacture: 1985 Bending length: 2,550 mm Material thickness: up to 5 mm Automatic pre-bending Gedpoy R N Hnjfx Abmeit Drive: 7.5 kW Weight: 4,600 kg Price: EUR 4,750 plus VAT, ex location

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Giedpsy R N Hhefx Abmot Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: used, Industrial Tempering / Heat Treatment Oven – Lister Machine Tools Heavy duty industrial tempering and heat treatment oven by Lister Machine Tools Ltd. Ideal for engineering workshops, toolmaking, heat treatment, metal hardening, tempering and industrial heating applications. Fitted with digital temperature controller and insulated chamber with front loading access door. Suitable for precision heating and workshop production use. Features: Industrial electric tempering oven Digital temperature control Gedey R D Tijpfx Abmoit Insulated heat chamber Front loading design Heavy duty industrial construction Mounted on steel stand Suitable for tooling and heat treatment work Condition: Used workshop condition with cosmetic wear from industrial use. Complete and operational. Ideal for engineering shops, fabrication workshops, blacksmithing and toolroom environments. Loading available on site. Viewing welcome. Transport can be arranged. Open to sensible offers.

Condition: used, functionality: fully functional, Year of construction: 2005, machine/vehicle number: 0505/526/446705, working width: 4,050 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, overall weight: 13,200 kg, For Sale: Colgar Guillotine Shear CM 4005 We offer you the opportunity to acquire a high-quality Colgar guillotine shear CM 4005. This powerful machine is ideal for anyone working in sheet metal processing who demands the highest levels of precision and efficiency. Product Details: - Model: CM 4005 - Year of manufacture: 2005 - Condition: used - Technical Specifications: Weight: 13,200 kg Cutting length: 4,050 mm Blade length: 4,200 mm Working span: 4,200 mm Gap between frames: 250-500 mm - Capacity: Steel 5.0 mm Aluminium 6.0 mm Stainless steel 3.0 mm Advantages: - High precision and reliability - User-friendly control interface - Low maintenance and long service life Location: Eder Blechbau Frankenweg 2 Giodpfxoy Rzvue Abmet 9100 Völkermarkt If you are interested or require further information, please do not hesitate to contact us. "The machine is sold in accordance with Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. From the time the machine is made available at the named location, the buyer assumes all costs and risks including loading, transport, and customs formalities."

Year of construction: 1990, condition: used, Punching machine Trumpf Trumatic 240 Gedpfsy Ru Idsx Abmeit

Condition: good (used), Bar feeder, automatic bar loader for CNC lathe, brand Iemca, model Kid 80, year 2016. Godpsy N R Ttofx Abmoit

Condition: used, Chip Conveyor, Elevating Conveyor, Used Machine Manufacturer: KabelSchlepp KS Convogliatore Type: 50 Year of Manufacture: 2005 Weight: 600 kg Technical Specifications: Overall Dimensions (W x D x H): 3750 x 1060 x 1510 mm Belt Dimensions: 4400 x 420 mm Slat (Flight) Dimensions: 355 x 45 mm Slat Pitch (Distance): 300 mm Gsdjy Nnmdspfx Abmoit Discharge Outlet Size: 450 x 335 mm Heavy-duty construction, ideal for metal chips and industrial scrap

Year of construction: 2023, condition: used, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or * Gisdsy Ndg Hspfx Abmot

Condition: excellent (used), functionality: fully functional, Stozza Cams 250 Model 250 Sac Tool stroke: 250 mm Distance between column and toolholder: 425 mm Distance between table and end of upright: 520 mm Ram travel: 430 mm Table size: 340 x 560 mm Table travel: 350 mm Gisdpey Nc N Hsfx Abmst Number of strokes: 16–60

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 4,021 mm, travel distance Y-axis: 1,971 mm, travel distance Z-axis: 961 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 810D / 840D (HMI Advanced), overall weight: 11,100 kg, number of axes: 5, This 5-axis Stiefelmayer Laserhärtenalage was manufactured in 2009. It features a Siemens SINUMERIK 810D / 840D control system, ensuring advanced operation. With a weight of 11,100 kg, this machine is built for durability. If you are looking to get high-quality laser hardening capabilities, consider the Stiefelmayer Laserhärtenalage machine we have for sale. Contact us for further details. System as a mechanical gantry system without the laser source and without the process optics • Electrical: 400 V, 150 A, 50/60 Hz • 3 linear axes X/Y/Z and 2 rotary axes B/C on the machining head • Dimensions: The measured dimensions of the gantry system are approximately 7.7m x 5.5m x 2.5m This does not include the control cabinet and operator panel • Travel distances: The effective travel distances are 4021mm x 1971mm x 961mm • Handling weight: Estimated between 20kg – 30kg • Suitable for laser hardening welding cladding and cutting with appropriate laser retrofit • Siemens SINUMERIK 840D control included NC software and PLC logic for full machine operation Gisdpfx Aoy I U Tnjbmjt • Complete steel gantry frame included with drives cabling control cabinet and operator panel • Electrical schematics fully revised by Haas

Condition: used, Manual guillotine shear Type: Weingarten TH Condition: Used Technical data Cutting width: approx. 1070 mm Giodey I U Acspfx Abmet Sheet thickness: 1.25 mm

Year of construction: 2008, operating hours: 1,850 h, condition: ready for operation (used), table load: 750 kg, Machine tool manufactured in 2008. This BVL RC 1950 RW 2T features a useful length of 1545 mm, a maximum useful width of 1545 mm, and a maximum useful height of 1000 mm. It includes a 2-tank system for washing and rinsing, with a wash tank capacity of 825 liters and a rinse tank capacity of 825 liters. If you are looking to get high-quality washing capabilities, consider the BVL RC 1950 RW 2T machine we have for sale. Contact us for further details. • Useful length: 1545 mm • Max. useful width: 1545 mm • Max. useful height: 1000 mm • Basket diagonal: 2319 mm • Operating voltage: 3 x 400 V, N+PE, 50 Hz • Tank configuration: 2-tank system (wash & rinse) • Wash tank capacity: 825 liters • Wash tank heating: 24 kW (electric) • Wash spray pressure: 4.5 bar • Wash pump: FHE 40-200/75 (7.5 kW) Gjdpfxjy Izx De Abmsit • Rinse tank capacity: 825 liters • Rinse tank heating: 18 kW (electric) • Rinse spray pressure: 3.0 bar • Rinse pump: FHE 32-200/30 • Level control: LIQUIFANT FTL 260 • Filter mesh (wash): 2 mm • Filter mesh (rinse): 1 mm • Detergent dosing: Diaphragm dosing pump Alpha 1001 • Fan motor: 2.6 kW • Drive motor: 0.37 kW with brake Additional equipment • Mobile pull-out table with rollers for basket handling

Year of construction: 2013, condition: used, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Giodpfxjy Ihblj Abmet subject to prior sale!

Year of construction: 2023, condition: ready for operation (used), This Other FSW head was manufactured in 2023. Designed to integrate seamlessly with milling machines, it features friction welding technology. Ideal for enhancing your milling setup with advanced welding capabilities. Contact us for more information. • Item: FSW head (Friction Stir Welding head) • Quantity: 1 Gjdpfx Aey Iamysbmoit • Description: Friction welding equipment to install directly in a milling machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, overall weight: 1,310 kg, input voltage: 400 V, total length: 1,500 mm, total width: 1,000 mm, total height: 2,250 mm, NR.01 EGITAL Slotting Machine Mod. S 315 TG Used "CE" Year: 2008 CE. Excellent condition. Tool stroke: 0–315 mm Strokes per minute: 17–60 Ram height adjustment: 235 mm Head rotation: ±45° Distance tool to column: 460 mm Gjdpfx Absy H Imxomeit Distance head to table: 510 mm Rotary table diameter: 450 mm Fixed positions on rotary table: 24x15° Dimensions: 1000x1500x2250 mm Weight: 1310 kg Automatic tool release Chuck included

Condition: good (used), 1 used electric wire rope hoist Manufacturer: Habegger (Switzerland) Model: Hit Trac 64 Technical Specifications HIT-TRAC 64 E Rated force (pulling, lifting, lowering) 6,400 kg Overload protection via thermoelement Rope speed max. 2.5 m/min Rope length unlimited Weight incl. motor 240 kg Gedpfx Aoy Hftcsbmjit Rope diameter 20 mm Effective rope breaking load 300 kN 3-phase AC drive motor 50 Hz / 400 V, 6.8A Power output 3 kW Duty cycle 30%

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 Gedpfx Absy E N Hdjmoit 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Year of construction: 2018, condition: excellent (used), functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 2,000 mm, load hours: 9,635 h, sheet thickness steel (max.): 20 mm, type of input current: three-phase, machine/vehicle number: 541, Equipment: documentation/manual, For sale: Stigal Dynamic plasma cutting machine, year 2018, table size 2 x 6 m. The machine is in very good condition and fully operational, equipped with: - CNC control system - HS Plasma Torch Carrier (Z-axis speed: 165 mm/s) - Voltage-controlled torch height regulator - Dynamic material detection system - Vertical anti-collision system - Automatic UV screen - CAD/CAM software - Segmented extraction table with zone control - Roller guide for thin sheet metal - CEBORA PROF 166 HQC plasma source Technical specifications: Manufacturer: STIGAL Marcin Stępień Model/Name: Dynamic Machine Serial number: 541 Year of manufacture: 2018 Country of manufacture: Poland The Stigal Dynamic plasma machine is an industrial CNC plasma cutting system. It requires 400V three-phase power for proper operation and has a power consumption of 5.5 kW. This is an ideal machine for industrial applications in metal and sheet processing plants. The Plasma-Gas Cutter is designed for fast and precise cutting of steel sheets of various thicknesses. Transport within the EU is possible. VAT invoice available. Gijdpfx Absy Exfcjmot

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Technical Data: Machine type: Profile Bending Machine Gjdpoy Exdfofx Abmjit Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Condition: As-new, fully refurbished and upgraded Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Condition: used, functionality: fully functional, Due to relocation, we are selling our punching machines. The machines can be collected on site at our plant in Königsbach-Stein. Gedpfx Abey Etahsmsit

Condition: excellent (used), operating hours: 14,000 h, functionality: fully functional, For sale: VOLLMER CX100 CNC (Germany) sharpening machine for circular saw blades. It operates automatically and features oil cooling, ensuring high-quality sharpening. Sharpening occurs on both the front and back edges of the teeth. Many basic programs are available, but you can also create your own custom program for your saw. Easy setup and maintenance. A factory-installed ventilation hood is included. Gsdpfx Asy Ectkjbmeit A video showing how it works is available.