Ims

Condition: used, Year of construction: 1996,

Condition: new, functionality: fully functional, empty load weight: 545 kg, maximum load weight: 2,155 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,880 mm, loading space width: 1,530 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, Martz Bau-3 300/2 S 2.7T NEW VEHICLE Internal dimensions: 288cm x 154cm Sideboard height: 30cm Loading platform height: 40cm Total weight: 2700Kg Payload: 2155Kg Braked tandem axle trailer Overrun brake and parking brake from AL-KO 2x 1350Kg axles Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30cm steel sideboards 15mm thick, non-slip, and robust screen-printed wood floor Automatic jockey wheel with 400Kg support load 12 lashing eyes with 600Kg tensile force, also on the front Reinforced 13" C-tyre with steel valve M+S tires Net/rope hooks on the frame 13-pin connector Outline lights at the front Rear lights with reversing light and triangular reflectors Vertical ramp including lifting aid (gas spring) Shovel holder Walkable steel fenders OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Anti-theft device -Net, fine or coarse mesh -Aluminum floor -Aluminum floor panels Further accessories available on request! Plus freight to Gera and vehicle registration document 250 € net Pictures are for illustrative purposes only and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pick-up. Crsdpjztc Nxjfx Akqjf The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories, including for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come by directly!

Condition: good (used), Year of construction: 2019, Tool pre-setting device ZOLLER Hyperion 500, serial number H500UF3-00133, year of manufacture 2019. Cedpfx Asztc Nrokqsrf

Condition: good (used), Year of construction: 2022, Tool grinding machine, GEMINI Clottu AB-175, serial number 1949, manufactured in 2022. Cedpjztc Nlsfx Akqjrf

Condition: used, Year of construction: 2013, operating hours: 8,812 h, lifting height: 7,910 mm, free lift: 2,700 mm, fuel type: electric, mast type: triplex, fork length: 1,000 mm, fork width: 900 mm, total height: 3,200 mm, total length: 2,090 mm, total width: 1,130 mm, color: silver, Empty weight: 2.885 kg Csdpfxoztc I Uj Akqsrf Lifting capacity: 2.000 kg - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516215D01272 - Operating hours: 8812 - Lifting capacity: 2000kg - Lifting height: 7908mm - Overhead clearance: 3200mm - Free lift: 2700mm - Fork length: 1000mm - Maximum fork width: 900mm - Minimum fork width: 200mm - Number of wheels: 3 Wheels - Attachment: Side-shift - Options: Non-marking tires, Free-lift - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: 05 EPZS 0625SC - └ Battery year of construction: 2020 - └ Capacity: 625Ah - └ Battery voltage: 48V - └ Tray length [mm]: 1030 - └ Tray width [mm]: 525 - └ Tray height [mm]: 630 - Transport dimensions: 2092mm x 1138mm x 3200mm (l x w x h) - Transport weight [kg]: 2885kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), Tool grinding machine FRIEDRICH DECKEL S1, German patent DBP 3258. Cedsztc I Iopfx Akqsrf

Condition: ready for operation (used), Year of construction: 2007, punching force: 31 t, sheet thickness (max.): 5 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 2,100 kg, table load: 160 kg, number of axes: 2, CNC punching machine manufactured in 2007. This AMADA EMZ 3610 NT features a press force of 300 kN and a travel distance of 2500 mm in the X-axis and 1525 mm in the Y-axis. It has a maximum material thickness capacity of 4.5 mm and a stroke rate of 1000 strokes per minute. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for further details. Cjdpoztc Izjfx Akqorf

Condition: good (used), MITUTOYO PJ300H profile projector Crsdpfxsztc Ius Akqsf

Condition: good (used), Year of construction: 1979, Chip conveyor STEIMEL S5, serial number 17935109, year of manufacture 1979, drum diameter 500 mm, capacity 60 liters, maximum loading capacity 100 kg. Cjdpfoztc Injx Akqsrf

Condition: used, Year of construction: 2017, total length: 4,200 mm, total width: 2,350 mm, total height: 2,350 mm, Colour: Blue Weight: 11.800 kg - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 6088177254 - Drive system: CNC - Control system brand: Durma - Control system type: DT-7 - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 30.0 - Max. sheet thickness [mm]: 13 Crodpfxjztc Iho Akqjf - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 13 - Throat depth [mm]: 50 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed with lift-up guard - Angle adjustment: Manual - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4200mm x 2350mm x 2350mm (l x w x h) - Transport weight [kg]: 11800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Lathe, VOEST-ALPINE, spindle speeds 21 - 1,500 rpm. Crodjztc H Rjpfx Akqef

Condition: excellent (used), mileage: 524,161 km, power: 310 kW (421.48 HP), first registration: 04/2021, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 1,300 l, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,520 mm, total height: 3,930 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2021, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, navigation system, onboard computer, parking heater, power assisted steering, power mirror, second fuel tank, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = Crodpfx Ajztc H Dskqof - Alarm system - Aluminum fuel tank - Outside temperature gauge - Heated mirrors - Passenger seat - Leaf spring suspension - Car kit - DAB radio - Sunroof - Roof spoiler - Differential lock - Digital tachograph - Speed limiter - Air conditioning - Air suspension - Particle filter - Radio/CD player - Sleeper cab - Side door - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system = Further Information = General Information Number of doors: 2 License plate: 18-BRL-6 Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Axle Configuration Tire size: 315/70 R 22.5 Brakes: Disc brakes Front axle: Max. axle load: 7500 kg; Steered; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Rear axle: Dual tires; Differential lock; Max. axle load: 11,500 kg; Tire tread depth left (inner): 90%; Tire tread depth left (outer): 90%; Tire tread depth right (inner): 70%; Tire tread depth right (outer): 70%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 8,154 kg Payload: 10,846 kg GVW: 19,000 kg Interior Number of seats: 2 Maintenance, History, and Condition APK (Technical Inspection): valid until 01.2027 Technical condition: very good Optical condition: very good

Condition: new, functionality: fully functional, empty load weight: 379 kg, maximum load weight: 1,451 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 3,530 mm, loading space width: 1,840 mm, Year of construction: 2026, MARTZ Low-bed Trailer 350, 1.8T NEW VEHICLE Internal dimensions: 353cm x 184cm Total weight: 1800 kg Payload: 1421 kg Braked, single-axle low-bed trailer 1800 kg AL-KO axle with overrun brake, automatic reversing function and parking brake Bolted and galvanized steel frame Drawbar, foldable With hydraulic support 15mm thick, robust and non-slip screen-printed plywood floor 13-pole electrical system Plastic mudguards Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light, NSL (no-stopping light) and triangular reflectors 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Motorcycle support rail - Crank attachment to create a continuously adjustable tilting angle - Coarse or fine mesh net - Spare wheel with bracket Further accessories available on request! Images are for illustrative purposes only and may show optional accessories that incur an extra charge. Credpfxoztc Hwe Akqsf Plus vehicle registration document and freight to Gera: €175 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to our location.

Condition: good (used), Year of construction: 2006, Turning center SPINNER TC32-MC, control system SIEMENS Sinumerik, hydraulic bar feeder LNS Super Hydrobar, purchased in 2006. Csdpeztc Hqjfx Akqsrf

Condition: good (used), Mortising machine NAGEL HHM 100/2.2-70, machine no. 1710. Cedpfxsztc Hko Akqsrf

Condition: used, mileage: 41,463 km, power: 100 kW (135.96 HP), first registration: 08/2023, fuel type: diesel, empty load weight: 2,080 kg, maximum load weight: 720 kg, overall weight: 2,800 kg, tire size: 195/65R16C, axle configuration: 4x2, wheelbase: 3,200 mm, next inspection (TÜV): 09/2027, fuel: diesel, brakes: other, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 1,930 mm, total width: 1,920 mm, loading space length: 2,741 mm, loading space width: 1,650 mm, loading space height: 1,350 mm, Year of construction: 2023, front tire size: 195/65R16C, rear tire size: 195/65R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, trailer coupling, * German vehicle * 1st owner * Original 41,463 km * TÜV (technical inspection) valid until 09/2027 * Condition, see photos * Body type: Long wheelbase van * Cargo area dimensions: Length 2,741 mm x Width 1,650 mm x Height 1,350 mm * SORTIMO shelving system with workbench, 100 kg load capacity & vice * SORTIMO roof system with ladder rear lift & transport tube * Sliding door, load/passenger compartment, right side * Rear door without glazing (opening angle 180 degrees) Crsdpfx Akoztc Hdjqsf * Solid cargo area partition * Load securing/tie-down points * Cargo area light, LED * Trailer hitch: fixed ball hitch * Trailer load 2,500 kg * Equipment line: Base * Seats in the cab: Driver's seat, comfort version * Seats in the cab: Passenger seat as a double seat * Comfort automatic climate control, Thermotronik * Steering wheel with multifunction controls including trip computer * Upholstery: artificial leather * Speed limiter: 120 km/h * Airbag * Cruise control with distance regulation / Distronic Plus * Transmission: Automatic GTronic - (9-speed) * Driver assistance system: active brake assist * Intelligent Light System, LED * Parktronic system (PTS) * Hill-start assist * Driver assistance system: Attention-Assist (fatigue detection sensor) * Brake assist * Driver assistance system: breakdown management * Driver assistance system: crosswind assist * Driver assistance system: lane keeping assist * Lane keeping package * BlueEFFICIENCY package * Parking package * Power steering * Audio system Audio 30 (DAB, Bluetooth) * Electric windows, 2-way * Windshield wipers with rain sensor * Comfort central locking with remote control * Immobilizer * Anti-lock braking system (ABS) * Electronic stability program (ESP) * Steering wheel (leather) * Start/stop system * Exterior mirrors, electrically adjustable and heated, both sides * Exterior mirrors with blind spot monitoring * Rear lights, LED * Fuel tank: enlarged * Metallic paint * LED daytime running lights * Adaptive brake light * Communication module (LTE) for digital services * Mercedes-Benz emergency call system * Engine: 2.0 Ltr - 100 kW CDI CAT * Low emissions according to exhaust standard Euro 6d * Wheelbase 3200 mm * Permissible total weight 2,800 kg * Unladen weight 2,080 kg * Payload 720 kg If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV inspection, a new SP inspection, or a new UVV inspection. You can find more trucks on our homepage under: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that no false impressions arise regarding the condition and suitability for the buyer. Inspection and examinations are possible and expressly desired at any time after making an appointment. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, operating hours: 6,637 h, mileage: 52,834 km, power: 73 kW (99.25 HP), first registration: 07/2015, overall weight: 4,900 kg, fuel type: diesel, color: red, axle configuration: 4x2, maximum load weight: 2,450 kg, empty load weight: 2,450 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: none, suspension: steel, number of seats: 2, Equipment: air conditioning, cabin, differential lock, onboard computer, power assisted steering, soot filter, * German vehicle * Original 52,834 km * Only 6,637 operating hours * Condition, see photos * All-wheel steering can be engaged * EasyDrive (Hydrostatic drive) (SN) * Hako Citymaster 2000 * 2 rotating brushes at the front, 800 mm wide * Sweeping width: 3,000 mm * Extension device * Sweeping width: 1,033 mm * Ideal for sidewalks, footpaths and bike paths, narrow alleys, etc. * Sweeping material container: 1.99 m³ * Fresh water tank: 330 liters * Hydraulic high-dumping up to 45° tilt * VW 4-cylinder diesel engine * Power: 73 kW * 50 km/h approval * 2-person full comfort cabin * Air conditioning * Heated, tinted panoramic windshield * Comfortable suspension seats * Rear view camera * Ergonomic arrangement of all controls * Central lubrication system Crjdpfx Asztc E Tokqef * All-round warning lights * Wheelbase: 1,900 mm * GVWR: 4,900 kg * Unladen weight: 2,450 kg * Payload: 2,450 kg * Self-propelled working machine, street sweeper * If sold to commercial businesses and for export (non-EU and EU), the German commercial regulations apply. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV certificate, a new SP certificate, or a new UVV certificate. You can find more trucks on our homepage at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise about their condition and suitability. Inspection and examinations are possible at any time by prior arrangement and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicles. Changes, prior sale and errors excepted.

Condition: new, The deep girders are suitable for a support depth of 1,100 mm and a crossbar width of 50 mm. Current delivery time: approx. 10-15 working days (from external warehouse). The scope of supply includes: 1x deep girder, new Material color: Sendzimir galvanized Overall length: approx. 1,108 mm Csdpfoztc E Hsx Akqerf Clear span: approx. 998 mm U-profile dimensions: approx. 40x100x40 mm Material thickness: approx. 3.00 mm Crossbar support: approx. 50 mm Weight/piece: approx. 6.00 kg

Condition: good (used), Milling machine STEINEL SH4, machine no. 5807, approximate overall dimensions: approx. 1,060 x 1,150 x 1,540 mm (W x D x H), X-axis travel: approx. 300 mm, Y-axis travel: approx. 150 mm, Z-axis travel: approx. 250 mm, clamping area: approx. 620 x 130 mm, spindle speeds: 32-630 rpm, power. Crodpfx Akoztc Eteqjf

Condition: excellent (used), mileage: 446,804 km, power: 302 kW (410.61 HP), first registration: 07/2005, fuel type: diesel, tire condition: 70 %, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel-air, total length: 10,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2005, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, power mirror, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Airbag - Armrest - Disc brakes - Front suspension: Leaf - Open roof - Radio/Cassette player - Rear suspension: Air - Refridgerator - Sleeper cabin - Sper = More information = Tyre profile: 70% Brakes: disc brakes Cjdpoztc Emsfx Akqsrf Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Differential lock; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: good (used), Year of construction: 2005, Turning machine SCHERER FEINBAU PM1-CNC, machine no. 65101, year of manufacture 2005, power requirement 4 kVA, weight 420 kg, with oil filtration system CLEANMIST CM500. Csdoztc Easpfx Akqorf

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER Manufactured in 2019 The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Cedpfx Aksztc D Njqsrf Weight (kg): 33 Cable length (m): 12 INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: good (used), Lathe SCHAUBLIN 102N80, serial number 277444. Crodpfx Ajztc Dvokqjf

Condition: good (used), SCHAUBLIN 102 lathe, serial number 215617. Credpsztc Dpefx Akqsf

Condition: ready for operation (used), Year of construction: 2024, CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details. • Automatic cycles: Universal millimeter back gauge with sensor for automatic cutting • Throat: 610 mm Extended Throat • Pressing force: 500 kN • Height adjustment: Hydraulically adjustable tables at the input and output • Number of cutting heads: 5 workstations included: Punching, Angle shearing, Flat bars shearing, Bars cutting, Notching • Punching Power: 165 Ton • Maximum capacity: Ø 40 x 30 mm or Ø 34 × 34 mm • Shearing of Angles at 90º: 205 x 205 x 18 mm • Shearing of Flat Bars: 750 x 20 mm or 400 x 30 mm Cedjztc Diepfx Akqerf • Shearing of Round Bars: 60 mm • Shearing of Square Bars: 60 mm • Rectangular Notching: 90 x 58 x 16 mm • Built-in press brake with upper and lower tool 100 mm • Stop for punching • Including a wide range of dies and accessories