Used Hydr. presses single column 125t for sale
4
pressure 200 t
weight of the machine ca. 26 t
power requirement 72 kW
serial number 10071
under power
B7akhe3cuw
5
pressure 160 t
throat 440 mm
stroke 20-150 mm
no. of strokes 50 Hub/min
dayligth ca. 390 mm
table surface area 1300 x 750 mm
Bu0qnlk2fo
table hole 170 mm
hole in the table 400 / 250 mm
ram hole 50 mm
ram head dimension 445 x 560 mm
total power requirement 7,5 kW
weight of the machine ca. 8 t
dimensions of the machine ca. 2,9 x 1,5 x 2,8 m
6
pressure: 160 t
slide stroke: 500 mm
throat: 360 mm
drawing depth max.: 200 mm
table surface area: 900x600 mm
ram surface area: 450x750 mm
Plv9r
height over floor: 800 mm
biggest distance between table & ram: 1000 mm
speed up : 125 mm/sec
speed down: 200 mm/sec
force of ejector: 830 kN
total power requirement: 17 kW
weight of the machine ca.: 7,7 t
dimensions of machine: B:1,3xT:2,0H:3,7 m
Press has a deep drawing device with 200 mm drawing depth
- two hand control
accessories:
- on Ram install...
10
bending ram: cap. 800 to, draw back cap. 50to, max stroke/height 800mm, table 600x2.100mm /// down holder ram: ca. 250to, draw back cap. 20to, max stroke/height 800mm, joined cap. 1.050to and table 1.200 x 2.100 mm, height 6,8m / over floor 5m, width 3m, depth 4,1m
Lha8qvu
8
pressure 320 t
throat 800 mm
stroke 630 mm
distance between table / ram max. 1000 mm
ram head dimension 710 x 600 mm
table-size 800 x 1200 mm
work height max. 1015 mm
quantity of oil 1100 l
Number of working hours 7663 h
weight of the machine ca. 15 t
dimensions ca. 1600 x 2200 x 4800 mm
dimensions of switch cabinet ca. 1200 x 400 x 1800 mm
Tested for function. During the test run it is noticed that the press ram
not 100% leak-proof.
In addition, the cable for manual operation was mended sev...
6
Press capacity: 250 ton
Throat depth: 430 mm
Stroke: 300 mm
Daylight: 500 mm
Bbpdinsfyw
Table surface area : 1.100 x 850 mm
Slide area: 1.100 x 850
Table height over floor: 950 mm
Approach speed: 330 mm / sec
Working speed: 11 - 30 mm / sec
Return speed: 330 mm / sec
Die cushion capacity in table: 80 ton
Die cushion stroke: 100 mm
Ejector in ram: 5 ton
Ejector stroke in ram: 75 mm
Required power: 40 kW
Oil volume: 1.400 l
Dimensions L x W x H: 3.200 x 2.500 x 4.250 mm
Weight of machine approx.:...
5
pressure 150 t
tracking travel 34 mm
safety distance 190/225 mm
P73qz
serial number 11770
250 t HYDRAULIC PRESS
make ZEULENRODA GMBH (GERMANY), type PYE 250 S 1, year of construction 1994
Limqq0xi
pressure 160 t
throat 350 mm
stroke 140 mm
dayligth 370 mm
table surface area 750 x 620 mm
hole in the table 220 mm
table height over floor 850 mm
ram surface 750 x 580 mm
oil volume 700 l
feed down 300 mm/sec
feed up 480 mm/sec
feed under pressure 58 mm/sec
total power requirement 60 kW
weight of the machine ca. 10,8 t
required space 2,4 x 1,8 x 3,5 m
Upzqbezp
permitted for manual loading according to the German Safety Regulations (UVV)
with oil-hydraulic drive, controllable two-hand operati...
5
Catalog No. : 5882
Type: CTC 400
F32m29j
Producer: ZDAS
Made in: 1993
Characteristic:
Pressing force: 400 t
Throat depth (distance from the frame to the piston rod axis): 1470 mm
Power demand: 25 kW
Ram dimension: 1500x1300 mm
Machine height: 6740 mm
Machine length: 5350 mm
Machine width: 3000 mm
Machine weight: 50500 kg
2
The machine is in good technical condition, by prior arrangement the possibility of test drive.
Camljv0syx
Press capacity: 250 ton
Throat depth: 400 mm
Stroke: 600 mm
Daylight: 800 mm
Table surface area : 1060 x 780 mm
Slide area: 980 x 620 mm
Die cushion capacity in table: 80 ton
Die cushion stroke: 200 mm
Approach speed: 450 mm / sec
B0ujcgf2im
Return speed: 400 mm / sec
Required power: 48 kW
Table height over floor: 1000 mm
Side opening in the columns L ? R: 640 mm
Oil volume: 1300 l
Dimensions L x W x H: 2900 x 1700 x 3700 mm
Weight of machine approx.: 20 ton
4
pressure 200 t
Mw8dfo
power requirement 67 kW
weight of the machine ca. 27 t
if desired with coiler
if desired with straightening device
6
Press force: 1.250 to.
Daylight: max. 480 mm
Bflvqkzeik
Stroke: max. 355 mm
working high: 1.000 mm
weight of the press: 6.500 Kg.
weight of the pump: 600 Kg.
pressure 100 t
throat 320 mm
stroke 160 mm
B38tapb22o
dayligth 480 mm
table surface area 630 x 550 mm
hole in the table 200 mm
table height over floor 860 mm
ram surface 560 x 450 mm
oil volume 500 l
total power requirement 30,5 kW
weight of the machine ca. 6,4 t
required space 1,6 x 2,0 x 2,9 m
year of manufacture 1979
overhaul 1993
permitted for manual loading according to the German Safety Regulations (UVV)
with oil-hydraulic drive, controllable dependent on pressure/time and way, hydrauli...
2
pressure: 200 t
throat: 420 mm
S8v3l8nog
stroke: 500 mm
daylight dimension : table/slide up: 720 mm
daylight dimension : table/slide low: 220 mm
clamping plate on table: 1030 x 800 x 100 mm
table surface area: 1050 x 800 mm
die cushion hydr. pressure/stroke: 63t / 120mm
surface area of ram: 1030x630 mm
total power requirement: 59 kW
weight of the machine ca.: ca. 22 t
space requirement approx.:: L:2,77 x B:1,48 x H:4,72 m
dimensions electric cabinet LxWxH: ca. 1,5x0,5x2,3 m
E-cabinet 002-1 Nr...
1
Nominal forming force: 800 t
Table dimensions: 2000X1600 mmMachine weight: 20000 kg.
Xcwhcj3u
The machine is in good technical condition, after previous agreement the possibility of test drive.
9
Hydraulic press KRUPP type PEZZR 250/2200
Capacity: 250 T
Travel: from 20 to 200 mm
Year of construction: 1977
Table: 2200 x 1200 mm
Maxi setting high: 550 mm
Motor power: 22 kW
Length: 4184 mm
Width: 3330 mm
Jcim09d8
Depth: 1830 mm
Weight: approx 40 T
5
Raster-Zeulenroda
rated capacity 2.000 kN
320 bar
pressure capacity max. 200 t
voltage 400 V / 63A
weight of the machine ca. 16,5 t
dimensions of the machine ca. 2.000 x 3.800 x 4.200 mm
Vsxt9u
1
table surface area 1000x1000 mm
throat 450 mm
stroke 300 mm
distance table/blankh.,max. stroke up,adjustm. up 580 mm
die cushion capacity 20 t
die cushion stroke 300 mm
feed down 400 mm/sec
feed up 400 mm/sec
table height 1350 mm
surface of drawing cushion Ø 350 mm
total power requirement 55+11 kW
weight of the machine ca. 19,5 t
dimensions of the machine ca. 1,5x3,5x4,6 m
pressure 160 t
mech. Counter, two-hand control, blankloader + gripper feeder - SPA
with oilhydr. Drive hydr. and elec. UV...
Catalog No. : 5350
Type: PHP 1000
Producer: Dieffenbacher
Made in: 1995
Characteristic:
Pressing force: 1000 t
Maximum stroke: 1800 mm
Length of the table: 2200 mm
Width of the table: 1600 mm
Piston: 460 mm
Btmmgjdi3c
Machine height: 9655 mm
Machine length: 5220 mm
Machine width: 3000 mm
Machine weight: 75 t
4
pressure: 200 t
throat: 420 mm
stroke: 500 mm
daylight dimension : table/slide up: 720 mm
daylight dimension : table/slide low: 220 mm
table surface area: 1050 x 800 mm
Lqzkh
clamping plate on table: 1030 x 800 x 100 mm
die cushion hydr. pressure/stroke: 63t / 120mm
surface area of ram: 1030x630 mm
total power requirement: 59 kW
weight of the machine ca.: ca. 22t t
space requirement approx.:: L:2,77 x B:1,48 x H:4,72 m
E-cabinet 001-3 Nr. 244 16
1
The machine is in good technical condition, by prior arrangement the possibility of test drive.
Camlhaaaeo
9
Comes for sale:
1 piece used hydraulic single column press
Manufacturer: WMW
Type: PYE160S
BJ: unknown
Bfvnddtm
Press can be inspected in our warehouse in 09599 Freiberg.
Price and videos on request.
11
Hydraulic Double Column Press LVD
Capacity: 200 Ton
Stroke of ram: 360 mm
Table size: 1500 x 1300 mm
Daylight: 700 mm
Max. closing speed: 300 mm/sec.
F0bn0cyi
Max. return speed: 220 mm/sec.
Motor power: 30 HP
Machine weight: 20.000 kg
County of origin: Belgium
Make Mackey & Bowley
YOP 80 er
Technische Daten
Belxdlaqrw
Hydraulisch / MechanischHydraulic
Presskraft1000 Ton
Hub750 mm
ABMESSUNGEN
Länge 3960 mm
Breite 1500 mm
Höhe 2600 mm
2
Catalog No. : 5510
Type:
Producer: Fjellman
Made in: 1980
Characteristic:
Hlnao7r3
Pressing force: 2500 kN
Length of the table: 1200 mm
Width of the table: 945 mm
Ram stroke: 700 mm
Machine weight: 16 t
6
pressure: 200 t
stroke: 500 mm
throat: 420 mm
daylight dimension with clamping plate Slide/ up: 720 mm
daylight dimension with clamping plate Slide/ low: 220 mm
table surface area: 1050 x 800 mm
die cushion hydr. pressure/stroke: 63t / 120mm
clamping plate on table: 1030 x 800 x 100 mm
surface area of ram: 1030x630 mm
Lqzib
total power requirement: 59 kW
weight of the machine ca.: ca. 22 t
space requirements of the machine approx.: L:2,77 x B:1,48 x H:4,72 m
dimensions electric cabinet LxWxH: ca...
1
Nominal forming force: 200 t Table dimensions: 2000X1500 mm.
Cwvatqmi
The machine is in good technical condition, after previous agreement the possibility of test drive.
3
- Ram guidance by 2 guide rails
- Ram stroke infinitely adjustable via position sensors
- Hydraulic systems: Hörbiger
- Flow valve NG 80
- manual pressure control valve
- Electrical equipment: Fatek- Omron
- Safety device Sick / Pilz
- CE standard
- two-hand operation
Colour: Main body papyrus white RAL 9018, ram plate papyrus white RAL90183,
safety doors slate grey RAL 7015
Technical data:
Pressing force: 1500 KN
ram stroke: 400 mm
Impact load: 1.000 KG
Vuefsm
Max. working pressure working pre...
5
Hydraulic single column press make WMW ZEULENRODA type PYXE 250 S
Make # 084-024/2
Technical data:
Feed Nominal pressing force 250 t
Size clamping table L x W x H 1300 x 950 x 120 mm
Size ram plate L x W x H 1250 x 900 x 110 mm
throat 500 mm
Working pressure 200 at ü
Speed 0,160 m/sec
Return ram force 50 Mp
Working pressure 200 atü
Speed 0.100 m/sec
ram stroke 500 mm
maximum distance between table and ram 970 mm
connected load 13,5 kW
weight approx. 12,5 t
overall height approx. 3150 mm
with
- e...
6
Hydraulic 180 ton semi-automatic press press. Heated mounting plate (max. 100'C), Siemens PLC control.
Svzbcc
3
Technical data:
Pressure 160 to
Table length 1250 mm
stroke 250 mm
throat 500 mm
Installation height max. 480 mm
weight approx. 11,2 to
Power main engine 30 kW
Oil quantity 800 liters
.
width approx. 1,25 m
depth approx. 2,6 m
Height approx. 3,65 m
.
Mw8csw
.....
8
Hello
I sell press brake description attached
Brand : Colly
Model : PS 125.4
Year : 1989
Capacity : 4M 125 TONS
Bnzofnz
Digital control : Delem DA58
Electric backgauge
Machine in good condition
Machine loaded on truck
For more information please contact me
Sincerely
3
Technical data: Press force: 650 tons Table size: 1500 x 1000 mm Slide surface: 1500 x 800 mm Stroke: 900 mm Press speed: 1.4 - 4.7 mm/sec. Projection: 1200 mm Distance table-slide: 1200 mm Power: 30 kW Dimensions (length x width x height): 1500 x 3780 x 4400 mm Weight: approx. 32 tons The seller is not liable for writing or data transmission errors. The machine is in optics, technology and wear according to the age; used machines are sold without any warranty.
Vssny3
5
A used bending machine from the manufacturer HMK.
The pressing power up to 500 t
Year of construction: 1989
Irbxjngu8
Machine number: 1283
4
Hydraulic single station press make WMW ZEULENRODA type PYE 160 S 1
machine # 057-007/38 year of construction 1974
technical data:
max. pressing force 160 t
retraction force 34 t
ram stroke 500 mm
throat 360 mm
installation height 800 mm
speed from 0,2 m/min.
speed up to 0,125 m/min.
average working speed 92 mm/s
speed to 125 mm/s
table size 900 x 630 mm
working surface 750 x 450 mm
table height 800 mm
working pressure 160 kp/cm³
Connected load 17 kW
dimensions L x W x H 1250 x 2200 x 3650 mm
we...
Hydraulic press PYE 160 S1M.
Year of production 1988. Producer VEB Wema Zeulenroda (Germany).
Machine after a general review. New seal.
Parameters:
Maximum pressing force 160 tons.
Working pressure 16 MPa.
Upper table 700 x 450 mm.
Lower table 900 x 630 mm.
Ground clearance 800 mm.
Cylinder stroke 500 mm.
Speed down 200 mm / sec.
Up speed 125 mm / sec.
Ejector force 63 tons.
Ejector stroke 200mm.
The demand for power 17 kW.
Weight 7 tons.
Blrw3hbyra
14
Automotive Hydraulic press for stamping / deep drawing and Hydroforming
Manufacturer : SPS ( SIEMPELKAMP )
Year : 2003
Force deep drawing: 1600 Ton.
Working speed : 500 mm/sec
Force hydroforming: 3.500 Ton
Stapvk
Stroke : 1.350 mm
Moving bolster : 3.150 mm x 1.900 mm
Cushion :
Force : 400 Ton.
Total weight : 420 Ton.
Excellent condition !!
3
pressure 200 t
stroke 500 mm
table: 1000 - 800
feed down 150 -280 mm/sec
feed under pressure 10 - 26 mm/sec
feed up 180 - 300 mm/sec
U9uoqo2u
table height over floor 750 mm
total power requirement 22 kW
weight of the machine ca. 7 t
dimensions of the machine ca. m
1
die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500
Bdf3dvw3oj
3
DPM 100-150 TON 1070-150
Press Power kN 1500
Max. Working Pressure bar 244
Stroke mm 300
Diameter of Piston Arm Ømm 280×200
Advance Speed mm/sec 9
Working Speed mm/sec 5
Return Speed mm/sec 10
Motor Power kW 11
A Hole Distance mm 190
B Working Area mm 1070
Zs7i0
C Depth mm 290
L Length mm 2110
W Width mm 1000
H Height mm 2340
Weight kg 1900
4
Hydr. single column press make MAE type S-RH 160
technical data:
max. pressure 160 t
throat 360 mm
stroke 500 mm
pressure piston dia. 280 mm
drive power 22 kW
weight approx. 10 t
dimensions approx. 1800 x 1400 x 3000 mm
with
- with horn dimensions: 720 long, 570 x 570 mm side length
with 1 T-slot on top
L23wn
used, in good condition
11
PYE 250 S1 hydraulic press C-Frame Single Column.
Bfipik23vh
Production year 1981. Producer VEB Wema Zeulenroda (Germany).
The machine after a general review. Changing the seal, piston cut.
Parameters:
Maximum pressure 250 tons.
Working pressure of 20 MPa.
Upper table 700 x 450 mm.
Bottom table 900 x 630 mm.
800 mm ground clearance.
500 mm cylinder stroke.
Down speed 110 mm / sec.
Up speed 200 mm / sec.
Demand for 20.5 kW.
Weight: 8 tons.
4
pressure:500 t
passage width:1200 mm
Jvziia
stroke:400 mm
weight of the machine ca.:40 t
dimensions:2800 x 1750 x 4350 mm
return capacity:50 t
:50 kW
Max Working height:800 mm
:0 - 10 mm
:0 - 10 mm/sec.
:400 mm
pestle plate:1000 x 1000 mm
table plate:1200 x 1200
table height over floor:1200 mm
:700 l
4
pressure 200 t
stroke 500 mm
Beoje7xnna
table: 1000 - 800
feed down 150 -280 mm/sec
feed under pressure 10 - 26 mm/sec
feed up 180 - 300 mm/sec
table height over floor 750 mm
total power requirement 22 kW
weight of the machine ca. 7 t
dimensions of the machine ca. m
1
More technical data on request
ht curtain
T70hrn8f
manual and automatic working
manual stroke adjustment by camshaft switch
maintenance free self lubricating 4-fold ram guiding
polster plate with T-slots
according to CE rules
press force:150 tohydraulic pressure:254 bartable:1200 x 750 mmram dimension:950 x 650 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:5,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.225 mmwidth:1.600 mmheigth:3.650 mmweight:...
