Startim GmbH

Condition: good (used), Year of construction: 2007, Equipment: chip conveyor, Technical Data DECKEL MAHO Seebach GmbH 4 Technical Data 4.1 Main Drive 18,000 rpm AC servomotor motor spindle Torque available at the spindle, considering efficiency – see diagram Motor power at 100% duty cycle – see diagram Motor power at 40% duty cycle – see diagram Spindle speed infinitely programmable: 20 to 18,000 rpm Setup mode speed: 20 to 800 rpm Performance diagram 02.273697 18,000 rpm star-delta connection Torque Nm Power kW 4.3 Feed Drive AC servomotors for X, Y, Z axes Feed rate X/Y/Z infinitely programmable up to 20,000 mm/min Input increment X/Y/Z: 0.01 mm Rapid traverse X/Y/Z: 50 m/min Setup mode X/Y/Z: 20 to 2,000 mm/min 4.5 Position Measuring System Resolution X/Y/Z: 0.001 mm Position tolerance X/Y/Z with direct measuring system: 0.010 mm 4.6 Working Area Travel X axis: 750 mm Travel Y axis: 600 mm Travel Z axis: 520 mm 4.7 Main Drive Working spindle: SK HSK Tool holder: steep taper SK 40 DIN 69871 A Tool clamping: hydraulic/mechanical 4.8 Tool Changer with Magazine SK Working spindle: 18,000 rpm Magazine positions: 92 Tool length from spindle nose: 315 mm Max tool weight (automatic change): 6 kg Max total tool weight in magazine: 270 kg Retention studs 4.9 Work Table NC rotary table with swivel axis Clamping surface rotary axis: 500 x 500 mm Centering bore: 50 H6 Max table plate speed: 21.5 rpm Max torque rotary axis: 1,674 Nm Max swivel torque: 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 180 degrees Nlsdjx N H T Nspfx Ah Usk Input/display increment: 0.001 degrees Weight abt. 310 kg Max. table load (centered): 250 kg Max. workpiece diameter: 628 mm Max. workpiece height: 500 mm 4.10 Pallet Changer 2 pallets with pitch hole grid Rotary movement: 180 degrees Longitudinal travel: 350 mm Lift: 75 mm Permissible load (one sided): 250 kg Permissible load (both sides): 500 kg 4.11 Installation Data Electrical supply according to EN 60204-1 Machine connection: TN S system L1 L2 L3 N PE Main connection: 3N PE, 50/60 Hz, 400/230 V Rated current at 100% duty cycle: 82 A Power consumption at 100% duty cycle: 57 kVA Max. pre-fuse: 100 A Pre-transformer Free cable length above floor: 0.8 m Connection cable as per DIN 5710 VDE 0100 Pneumatic Supply Compressed air, condensate-free and dust-free Recommended filter fineness: 50 μm Air volume without blow air: 50 m³/h Additional blow air for tool cooling: 25 m³/h Air pressure: min. 5.5 bar, max. 8 bar Pressure connection (machine side): Bosch 1823 351 01

Condition: good (used), Year of construction: 2014, DMG MORI DMU 75 monoBLOCK Year of manufacture: 2014 Control system Siemens SINUMERIK 840D sl ShopMill Working area / Axes Traverse paths X / Y / Z: 750 / 650 / 560 mm 5-axis simultaneous machining NC swivel rotary table Table / Workpiece Table size: Ø 650 mm Max. table load: 600 kg Max. workpiece dimensions: Ø 840 mm, height 500 mm Spindle Tool holder: SK40 Max. speed: 18,000 rpm Through-spindle coolant (IKZ): 40 bar Feeds / Dynamics Rapid traverse X/Y/Z: 40 m/min Feed rate: up to 40,000 mm/min Acceleration: 6 m/s² Tool changer Chain magazine: 60 tool positions Max. tool weight: 8 kg Max. tool length: 315 mm Max. tool diameter: Ø 80 mm (adjacent positions occupied) Ø 160 mm (adjacent positions free) Nodpfxsx N H Rzs Ah Uelk Tool change time (chip-to-chip): approx. 4.9 s Chip removal Chip conveyor The machine is supplied with a newly packaged window/disc.

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 2387 mm Measurements depth 3978 mm Measurements height 2565 mm Machine weight 8200 kg Control Unit Brand HAAS Main Drive Spindle speed range 12000 Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 762 mm Y-Axis Movement 508 mm Z-Axis Movement 508 mm Table Table load 300 kg This 5-axis HAAS UMC-750 was manufactured in 2019, featuring a robust universal machining center with a 500 mm table diameter and a maximum table load of 300 kg. It includes a high-speed spindle up to 12,000 rpm, ISO 40 taper, and a 40-position tool changer. Ideal for complex geometries and diverse machining tasks. Contact us for more information about this machine. Nsdpfxex I S Nts Ah Ujlk Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, Make: HAAS Type of machine: UMC 750 SS Year of manufacture: 2016 Nljdpox H T Ibefx Ah Uok Control system: Haas Machine's weight: 6500 kg Tool holder: BT 40 x-travel: 762 mm y-travel: 508 mm z-travel: 508 mm Speed range: 15.000 1/min max. Table load: 300.0 kg Table dimensions: 500 mm Number of tools in the magazine: 40 Pos

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Heidenhain, controller model: iTNC-530, rotational speed (max.): 18,000 rpm, operating hours of spindle: 14,120 h, coolant supply: 40 bar, 5-Axis Machining Center Manufacturer: DMG Model: DMU-70 Evo Control: Heidenhain iTNC-530 Year of manufacture: 2003 Operating hours: 59,270 h Spindle hours: 14,120 h S/N: XXXXX Technical Data: ----- • X-Y-Z travel: 750 / 600 / 520 mm • Rotary table: 700 x 500 mm • Spindle: 18,000 rpm (35/25 kW 40%/100% duty cycle) • Tool magazine: 32x HSK-A63 • High-pressure coolant 40 bar incl. 900L auxiliary tank • Option: Sealing air for linear measuring systems • Option: Programmable coolant nozzles • Option: 3D probe TS-641 • Option: Operating mode 4 • Option: Chip conveyor • Weight: 8,675 kg Accessories: Nlsdpfx Ajx Hz S Uoh Usk ----- • Manuals • Electronic handwheel • Emulsion mist extractor • Rinsing gun Remarks: ----- • Machine from training department!

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of axis 5 Media Nlodox Hbmfspfx Ah Uok Chip conveyor Yes Movement X-Axis Movement 780 mm Z-Axis Movement 630 mm Y-Axis Movement 560 mm This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,717 h, General Data Measurements width 2387 mm Measurements depth 3978 mm Measurements height 2565 mm Machine weight 8200 kg Control Unit Brand HAAS Main Drive Number of axis 5 Movement X-Axis Movement 762 mm Y-Axis Movement 508 mm Z-Axis Movement 508 mm Table Table load 300 kg Nlsdpfx Ahsx Hbmro Uok Media Chip conveyor Yes Additional Equipment Wireless Intuitive Probing System Through-Spindle Coolant This 5-axis HAAS UMC-750 was manufactured in 2020, featuring a 762 mm X-axis, 508 mm Y-axis, and 508 mm Z-axis. It includes a spindle speed up to 12,000 rpm, ISO 40 taper, and a robust 40-position tool changer. The machine supports a maximum table load of 300 kg and offers advanced features like a wireless probing system, chip conveyor, and through-spindle coolant. Consider the opportunity to buy this HAAS UMC-750 universal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2007, x-travel 750 mm y-travel 600 mm z-travel 520 mm b-axis -10/+95 ° c-axis 360 ° control iTNC 530 HEIDENHAIN turning speed range - drive spindle 20 - 10.000 min/-1 drive capacity - spindle motor 9 / 13 kW feed speeds 10.000 mm/min rapid traverse X/Y/Z 24 / 24 / 24 m/min table surface area Ø 800 x 620 mm max. table load 350 kg T-slots 9x 14H7 mm table turning speeds 21,5 min/-1 tool taper SK 40 Nljdpfsx Dnfgjx Ah Uek max. tool weight 6 kg tool change unit 30 Pos. voltage 400 V total power requirement 25 kVA weight of the machine ca. 7,4 t dimensions of the machine ca. 3,60 x 2,50 x 2,80 m coolant tank 1,90 x 0,70 x 0,25 m 3+2-axis CNC machining center DECKEL MAHO DMU 70 - Factory no.: 15435713144 - Machine ON: 44,228 h - Spindle ON: 18,742 h - Control: HEIDENHAIN iTNC 530 - Electric handwheel - Swivel range B-axis 180° - Swivel range C-axis 360°

Condition: used, Year of construction: 2009, x-travel 730 mm y-travel 560 mm z-travel 560 mm Control Heidenhain iTNC 530 weight of the machine ca. 7 t Nsdsx Dda Hopfx Ah Ujlk

Condition: used, Year of construction: 2012, x-travel 730 mm y-travel 560 mm z-travel 560 mm Control Heidenhain iTNC 530 Nodpfx Ahex A H Uqe Uslk weight of the machine ca. 7 t

Condition: used, Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x H7 max. table load 700 kg number of toolpositions 60 pos. tool taper HSK-A63 Nlsdpfx Ahex A H Rls Uek total power requirement 49,7 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - Swivel-Millinghead

Condition: used, Universal Machining Center Machine type: DMG HSC 75 linear Control unit: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Operating hours: 63,133 h Spindle hours: 28,596 h TECHNICAL DATA: Traverse paths: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° Nlsdpfxoxyx Drs Ah Uok C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor

Condition: good (used), Year of construction: 2016, 1 used 5-axis machining center Manufacturer: Haas, Model: UMC-750, Year of manufacture: 01/2016, Read spindle hours: 4,960, Feed hours: 10,247 Travel X/Y/Z = 762x508x508 mm, Nlsdsxyinnepfx Ah Usk 10,000/5,000 Bh Tool holder: SK40, 40-position tool changer, NC SRT table size: 630x500 mm, Maximum table load: 300 kg, Maximum swing diameter: 686 mm,

Condition: ready for operation (used), Year of construction: 2019, operating hours: 24,088 h, functionality: fully functional, machine/vehicle number: 1165821, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS X-axis travel: 762 mm Nodpfoxxxgqex Ah Ujlk Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Number of tool magazine slots: 40 MACHINE DETAILS Tool taper: CT 40 Electrical data Voltage: 440 V Phase: 3 Frequency: 50/60 Hz EQUIPMENT Infinitely variable spindle speed Chip conveyor Internal coolant system

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine is in good technical condition; inspection under power is possible by arrangement. Video available. Technical specifications: Working table length: 900 mm Working table width: 500 mm Maximum table load: 500 kg Spindle drive power: 32 kW Number of tools in magazine: 28 pcs Nledpfx Aexxmr Ish Uek Maximum spindle speed: 12,000 rpm X-axis travel: 740 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Machine height: 2,400 mm Machine width: 2,500 mm Weight: 7.3 t

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 103, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm Nedoxtm Nvopfx Ah Uolk A-axis: 110° C-axis: 360° Tool holder: ISO25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Various tool holders Operating manual / Electrical schematic

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 106, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-Axis: 110° C-Axis: 360° Tool holder: ISO 25 Spindle speed: 50–12,000 rpm Nodpextm H Isfx Ah Uolk Minimum resolution: 0.001 MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Renishaw probing system Various tool holders Operating manual Electrical diagram

Condition: like new (used), Year of construction: 2012, operating hours: 23,252 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece diameter (max.): 840 mm, workpiece weight (max.): 600 kg, total height: 2,897 mm, total length: 3,567 mm, total width: 2,615 mm, table width: 650 mm, table length: 650 mm, overall weight: 12,100 kg, spindle speed (min.): 18,000 rpm, tool length: 315 mm, tool weight: 8,000 g, Year of construction: 2012 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 735 Y-axis travel mm: 650 Z-axis travel mm: 560 C-axis degrees: 360º (0,001) A-axis degrees: ±120(0.001) Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in the axes m/s2: 6 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø650 Maximum workpiece size (D x H) mm: Ø840x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 13/9 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 30 Tool changer: Double Gripper With free neighboring places mm: 160 Max. Tool Length mm: 315 Max tool weight kg: 8 Chip-to-chip time s: 4.9 Equipment Electronic Handwheel Nlsdpfsxrr I Iex Ah Uok Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun Paper band filter Machine running times Under power: 23252 Spindle Working: 6497 Basic machine dimensions / weight Length mm: 3567 Width mm: 2615 Height mm: 2897 Weight kg: 12100

Condition: good (used), Year of construction: 2017, Universal Machining Centre Machine type: DMG MORI DMU 75 monoblock Nlodpsxrcx Djfx Ah Uek Control: Heidenhain TNC 640 Year of manufacture: 2017 TECHNICAL DATA: 5-axis simultaneous machining Travel paths: X-axis: 750 mm Y-axis: 650 mm Z-axis: 560 mm B-axis: + / - 120° C-axis: 360° Number of controlled axes: 5 5-axis simultaneous operation Spindle speed range: 20,000 rpm Tool holder: HSK 63 Tool changer Tool positions: 60 NC rotary swivel table: Ø 650 Table size: 800 x 650 mm Max. table load: 600 kg Connected load: 48 kVA kW Machine weight: 12,000 kg Space required (LxWxH): 3.2 x 2.62 x 2.93 m Features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Probe: 3D Tool measurement: Blum Laser Electronic handwheel Oil mist extraction Bed flushing Operating mode: 4

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 12,5 t Nljdpfoxqrh Eex Ah Ujk

Condition: excellent (used), Year of construction: 2018, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller model: Heidenhein, workpiece height (max.): 620 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 350 kg, Equipment: chip conveyor, documentation/manual, Our 2018 model CMX 70U CNC 5-Axis Machining Center with Heidenhain control, in very good condition, is now available for sale due to excess capacity. We are located in Çayırova, Şekerpınar. The machine is available for on-site inspection. Only serious buyers are requested to contact us. Comes with kinematic set, Renishaw probe, and an integrated tool length measurement device. Direct mobile contact. (Whatsapp available) Nedpfsxm U E Eex Ah Ujlk

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2881-0191, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS DIALOG 112, spindle speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! Payment is due one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL SPECIFICATIONS Travel X-axis: 700 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Feed rate X, Y, Z: 1 - 10,000 mm/min Rapid traverse X, Y: 30 m/min Rapid traverse Z: 20 m/min Setup mode speed X, Y, Z: 1 - 2,000 mm/min Table width: 550 mm Table length: 900 mm Table load: 800 kg Max. setup height: 600 mm Distance spindle nose to table: 150 - 650 mm Max. spindle speed: 8,000 rpm Tool magazine positions: 40 Holder diameter: 40 mm Tool holder: SK 40 Max. tool diameter for standard tools: 80 mm Max. tool diameter for special tools with free adjacent slots: 140 mm Max. tool diameter for boring heads with free adjacent slots: 200 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 12 kg Control model: SIEMENS DIALOG 112 MACHINE DETAILS Dimensions & Weight Nsdpsxm Ty Ijfx Ah Uslk Dimensions (L x W x H): 3,500 x 3,300 x 2,900 mm Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The magnetic clamping plate shown on the table is not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2011, Make: DMG Type of machine: DMC 60 T Year of manufacture: 2011 Control system: Heidenhain iTNC 530 Machine's weight: ca. 9 t Tool holder: SK 40 x-travel: 780 mm y-travel: 560 mm Nljdpfxexg Tdye Ah Uek z-travel: 560 mm Speed range: 12.000 1/min Number of tools in the magazine: 120 Pl. Internal coolant supply: 40 bar. 3D Measuring probe: Heidenhain TS641 : 360 ° : x

Condition: excellent (used), Year of construction: 2002, 5-Axis Machining Center - Universal DECKEL MAHO DMU 70 EVO Year of manufacture: 2002 Control: MillPlus iT Heidenhain Machine hours: 33,289.6 h Spindle hours: 10,533.5 h Technical Data: X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm Main Spindle: Speed range - main spindle: 20 - 18,000 rpm Drive power - main spindle: 35 / 25 kW Max. torque: 130 / 87 Nm NC Rotary Swivel Table: Nodpfxsxf Hlhe Ah Uslk Clamping surface: 700 x 500 mm Swivel range, B-axis: 180° Rotatable, C-axis: 360° Max. table load: 350 kg Centering bore: 30 H6 mm T-slots: 7x 14H7 x 63 mm Table speed range: 21.5 rpm Tool Magazine: Number of tool positions: 32 Max. tool length: 315 mm Max. tool diameter: 105 mm Max. tool diameter with adjacent pockets empty: 130 mm Max. tool weight: 6 kg

Condition: used, Year of construction: 2007, operating hours: 86,863 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain iTNC530, table width: 800 mm, table length: 620 mm, overall weight: 9,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 39,186 h, number of slots in tool magazine: 60, A well-maintained used DMU 70 EVO Linear is for sale Nledpsxcnd Tsfx Ah Ujk